diff options
Diffstat (limited to 'Documentation/CodingGuidelines')
| -rw-r--r-- | Documentation/CodingGuidelines | 196 |
1 files changed, 184 insertions, 12 deletions
diff --git a/Documentation/CodingGuidelines b/Documentation/CodingGuidelines index f4137c6..c6e536f 100644 --- a/Documentation/CodingGuidelines +++ b/Documentation/CodingGuidelines @@ -1,5 +1,5 @@ Like other projects, we also have some guidelines to keep to the -code. For Git in general, three rough rules are: +code. For Git in general, a few rough rules are: - Most importantly, we never say "It's in POSIX; we'll happily ignore your needs should your system not conform to it." @@ -18,6 +18,14 @@ code. For Git in general, three rough rules are: judgement call, the decision based more on real world constraints people face than what the paper standard says. + - Fixing style violations while working on a real change as a + preparatory clean-up step is good, but otherwise avoid useless code + churn for the sake of conforming to the style. + + "Once it _is_ in the tree, it's not really worth the patch noise to + go and fix it up." + Cf. http://article.gmane.org/gmane.linux.kernel/943020 + Make your code readable and sensible, and don't try to be clever. As for more concrete guidelines, just imitate the existing code @@ -34,7 +42,17 @@ For shell scripts specifically (not exhaustive): - We use tabs for indentation. - - Case arms are indented at the same depth as case and esac lines. + - Case arms are indented at the same depth as case and esac lines, + like this: + + case "$variable" in + pattern1) + do this + ;; + pattern2) + do that + ;; + esac - Redirection operators should be written with space before, but no space after them. In other words, write 'echo test >"$file"' @@ -43,6 +61,14 @@ For shell scripts specifically (not exhaustive): redirection target in a variable (as shown above), our code does so because some versions of bash issue a warning without the quotes. + (incorrect) + cat hello > world < universe + echo hello >$world + + (correct) + cat hello >world <universe + echo hello >"$world" + - We prefer $( ... ) for command substitution; unlike ``, it properly nests. It should have been the way Bourne spelled it from day one, but unfortunately isn't. @@ -81,14 +107,33 @@ For shell scripts specifically (not exhaustive): "then" should be on the next line for if statements, and "do" should be on the next line for "while" and "for". + (incorrect) + if test -f hello; then + do this + fi + + (correct) + if test -f hello + then + do this + fi + - We prefer "test" over "[ ... ]". - We do not write the noiseword "function" in front of shell functions. - - We prefer a space between the function name and the parentheses. The - opening "{" should also be on the same line. - E.g.: my_function () { + - We prefer a space between the function name and the parentheses, + and no space inside the parentheses. The opening "{" should also + be on the same line. + + (incorrect) + my_function(){ + ... + + (correct) + my_function () { + ... - As to use of grep, stick to a subset of BRE (namely, no \{m,n\}, [::], [==], or [..]) for portability. @@ -106,6 +151,19 @@ For shell scripts specifically (not exhaustive): interface translatable. See "Marking strings for translation" in po/README. + - We do not write our "test" command with "-a" and "-o" and use "&&" + or "||" to concatenate multiple "test" commands instead, because + the use of "-a/-o" is often error-prone. E.g. + + test -n "$x" -a "$a" = "$b" + + is buggy and breaks when $x is "=", but + + test -n "$x" && test "$a" = "$b" + + does not have such a problem. + + For C programs: - We use tabs to indent, and interpret tabs as taking up to @@ -149,7 +207,7 @@ For C programs: of "else if" statements, it can make sense to add braces to single line blocks. - - We try to avoid assignments inside if(). + - We try to avoid assignments in the condition of an "if" statement. - Try to make your code understandable. You may put comments in, but comments invariably tend to stale out when the code @@ -177,6 +235,88 @@ For C programs: - Double negation is often harder to understand than no negation at all. + - There are two schools of thought when it comes to comparison, + especially inside a loop. Some people prefer to have the less stable + value on the left hand side and the more stable value on the right hand + side, e.g. if you have a loop that counts variable i down to the + lower bound, + + while (i > lower_bound) { + do something; + i--; + } + + Other people prefer to have the textual order of values match the + actual order of values in their comparison, so that they can + mentally draw a number line from left to right and place these + values in order, i.e. + + while (lower_bound < i) { + do something; + i--; + } + + Both are valid, and we use both. However, the more "stable" the + stable side becomes, the more we tend to prefer the former + (comparison with a constant, "i > 0", is an extreme example). + Just do not mix styles in the same part of the code and mimic + existing styles in the neighbourhood. + + - There are two schools of thought when it comes to splitting a long + logical line into multiple lines. Some people push the second and + subsequent lines far enough to the right with tabs and align them: + + if (the_beginning_of_a_very_long_expression_that_has_to || + span_more_than_a_single_line_of || + the_source_text) { + ... + + while other people prefer to align the second and the subsequent + lines with the column immediately inside the opening parenthesis, + with tabs and spaces, following our "tabstop is always a multiple + of 8" convention: + + if (the_beginning_of_a_very_long_expression_that_has_to || + span_more_than_a_single_line_of || + the_source_text) { + ... + + Both are valid, and we use both. Again, just do not mix styles in + the same part of the code and mimic existing styles in the + neighbourhood. + + - When splitting a long logical line, some people change line before + a binary operator, so that the result looks like a parse tree when + you turn your head 90-degrees counterclockwise: + + if (the_beginning_of_a_very_long_expression_that_has_to + || span_more_than_a_single_line_of_the_source_text) { + + while other people prefer to leave the operator at the end of the + line: + + if (the_beginning_of_a_very_long_expression_that_has_to || + span_more_than_a_single_line_of_the_source_text) { + + Both are valid, but we tend to use the latter more, unless the + expression gets fairly complex, in which case the former tends to + be easier to read. Again, just do not mix styles in the same part + of the code and mimic existing styles in the neighbourhood. + + - When splitting a long logical line, with everything else being + equal, it is preferable to split after the operator at higher + level in the parse tree. That is, this is more preferable: + + if (a_very_long_variable * that_is_used_in + + a_very_long_expression) { + ... + + than + + if (a_very_long_variable * + that_is_used_in + a_very_long_expression) { + ... + - Some clever tricks, like using the !! operator with arithmetic constructs, can be extremely confusing to others. Avoid them, unless there is a compelling reason to use them. @@ -188,9 +328,14 @@ For C programs: - When you come up with an API, document it. - - The first #include in C files, except in platform specific - compat/ implementations, should be git-compat-util.h or another - header file that includes it, such as cache.h or builtin.h. + - The first #include in C files, except in platform specific compat/ + implementations, must be either "git-compat-util.h", "cache.h" or + "builtin.h". You do not have to include more than one of these. + + - A C file must directly include the header files that declare the + functions and the types it uses, except for the functions and types + that are made available to it by including one of the header files + it must include by the previous rule. - If you are planning a new command, consider writing it in shell or perl first, so that changes in semantics can be easily @@ -273,6 +418,29 @@ Error Messages - Say what the error is first ("cannot open %s", not "%s: cannot open") +Externally Visible Names + + - For configuration variable names, follow the existing convention: + + . The section name indicates the affected subsystem. + + . The subsection name, if any, indicates which of an unbounded set + of things to set the value for. + + . The variable name describes the effect of tweaking this knob. + + The section and variable names that consist of multiple words are + formed by concatenating the words without punctuations (e.g. `-`), + and are broken using bumpyCaps in documentation as a hint to the + reader. + + When choosing the variable namespace, do not use variable name for + specifying possibly unbounded set of things, most notably anything + an end user can freely come up with (e.g. branch names). Instead, + use subsection names or variable values, like the existing variable + branch.<name>.description does. + + Writing Documentation: Most (if not all) of the documentation pages are written in the @@ -301,6 +469,10 @@ Writing Documentation: --sort=<key> --abbrev[=<n>] + If a placeholder has multiple words, they are separated by dashes: + <new-branch-name> + --template=<template-directory> + Possibility of multiple occurrences is indicated by three dots: <file>... (One or more of <file>.) @@ -317,12 +489,12 @@ Writing Documentation: (Zero or more of <patch>. Note that the dots are inside, not outside the brackets.) - Multiple alternatives are indicated with vertical bar: + Multiple alternatives are indicated with vertical bars: [-q | --quiet] [--utf8 | --no-utf8] Parentheses are used for grouping: - [(<rev>|<range>)...] + [(<rev> | <range>)...] (Any number of either <rev> or <range>. Parens are needed to make it clear that "..." pertains to both <rev> and <range>.) @@ -354,7 +526,7 @@ Writing Documentation: `backticks around word phrases`, do so. `--pretty=oneline` `git rev-list` - `remote.pushdefault` + `remote.pushDefault` Word phrases enclosed in `backtick characters` are rendered literally and will not be further expanded. The use of `backticks` to achieve the |