diff options
98 files changed, 9626 insertions, 1564 deletions
diff --git a/Documentation/Makefile b/Documentation/Makefile index 9fee0b9..14286cb 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -82,7 +82,7 @@ endif # ifndef ASCIIDOC7 -ASCIIDOC_EXTRA += -a asciidoc7compatible -a no-inline-literal +ASCIIDOC_EXTRA += -a asciidoc7compatible endif ifdef DOCBOOK_XSL_172 ASCIIDOC_EXTRA += -a git-asciidoc-no-roff diff --git a/Documentation/RelNotes/1.7.10.1.txt b/Documentation/RelNotes/1.7.10.1.txt index 36b8dee..806a965 100644 --- a/Documentation/RelNotes/1.7.10.1.txt +++ b/Documentation/RelNotes/1.7.10.1.txt @@ -1,12 +1,22 @@ Git v1.7.10.1 Release Notes =========================== +Additions since v1.7.10 +----------------------- + +Localization message files for Danish and German have been added. + + Fixes since v1.7.10 ------------------- * "git add -p" is not designed to deal with unmerged paths but did not exclude them and tried to apply funny patches only to fail. + * "git blame" started missing quite a few changes from the origin + since we stopped using the diff minimalization by default in v1.7.2 + era. + * When PATH contains an unreadable directory, alias expansion code did not kick in, and failed with an error that said "git-subcmd" was not found. @@ -36,6 +46,21 @@ Fixes since v1.7.10 * Rename detection logic used to match two empty files as renames during merge-recursive, leading to unnatural mismerges. + * The parser in "fast-import" did not diagnose ":9" style references + that is not followed by required SP/LF as an error. + + * When "git fetch" encounters repositories with too many references, + the command line of "fetch-pack" that is run by a helper + e.g. remote-curl, may fail to hold all of them. Now such an + internal invocation can feed the references through the standard + input of "fetch-pack". + + * "git fetch" that recurses into submodules on demand did not check + if it needs to go into submodules when non branches (most notably, + tags) are fetched. + + * "log -p --graph" used with "--stat" had a few formatting error. + * Running "notes merge --commit" failed to perform correctly when run from any directory inside $GIT_DIR/. When "notes merge" stops with conflicts, $GIT_DIR/NOTES_MERGE_WORKTREE is the place a user edits @@ -47,4 +72,7 @@ Fixes since v1.7.10 $there using the upstream information to a remote unreleated to $there. + * Giving "--continue" to a conflicted "rebase -i" session skipped a + commit that only results in changes to submodules. + Also contains minor fixes and documentation updates. diff --git a/Documentation/config.txt b/Documentation/config.txt index 83ad8eb..cb9882d 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -481,8 +481,8 @@ Common unit suffixes of 'k', 'm', or 'g' are supported. core.excludesfile:: In addition to '.gitignore' (per-directory) and '.git/info/exclude', git looks into this file for patterns - of files which are not meant to be tracked. "{tilde}/" is expanded - to the value of `$HOME` and "{tilde}user/" to the specified user's + of files which are not meant to be tracked. "`~/`" is expanded + to the value of `$HOME` and "`~user/`" to the specified user's home directory. See linkgit:gitignore[5]. core.askpass:: @@ -863,7 +863,7 @@ commit.status:: commit.template:: Specify a file to use as the template for new commit messages. - "{tilde}/" is expanded to the value of `$HOME` and "{tilde}user/" to the + "`~/`" is expanded to the value of `$HOME` and "`~user/`" to the specified user's home directory. credential.helper:: @@ -988,7 +988,7 @@ format.thread:: a boolean value, or `shallow` or `deep`. `shallow` threading makes every mail a reply to the head of the series, where the head is chosen from the cover letter, the - `\--in-reply-to`, and the first patch mail, in this order. + `--in-reply-to`, and the first patch mail, in this order. `deep` threading makes every mail a reply to the previous one. A true boolean value is the same as `shallow`, and a false value disables threading. @@ -1419,7 +1419,7 @@ instaweb.port:: interactive.singlekey:: In interactive commands, allow the user to provide one-letter input with a single key (i.e., without hitting enter). - Currently this is used by the `\--patch` mode of + Currently this is used by the `--patch` mode of linkgit:git-add[1], linkgit:git-checkout[1], linkgit:git-commit[1], linkgit:git-reset[1], and linkgit:git-stash[1]. Note that this setting is silently ignored if portable keystroke input @@ -1427,13 +1427,13 @@ interactive.singlekey:: log.abbrevCommit:: If true, makes linkgit:git-log[1], linkgit:git-show[1], and - linkgit:git-whatchanged[1] assume `\--abbrev-commit`. You may - override this option with `\--no-abbrev-commit`. + linkgit:git-whatchanged[1] assume `--abbrev-commit`. You may + override this option with `--no-abbrev-commit`. log.date:: Set the default date-time mode for the 'log' command. Setting a value for log.date is similar to using 'git log''s - `\--date` option. Possible values are `relative`, `local`, + `--date` option. Possible values are `relative`, `local`, `default`, `iso`, `rfc`, and `short`; see linkgit:git-log[1] for details. @@ -1623,18 +1623,18 @@ pack.indexVersion:: and this config option ignored whenever the corresponding pack is larger than 2 GB. + -If you have an old git that does not understand the version 2 `{asterisk}.idx` file, +If you have an old git that does not understand the version 2 `*.idx` file, cloning or fetching over a non native protocol (e.g. "http" and "rsync") -that will copy both `{asterisk}.pack` file and corresponding `{asterisk}.idx` file from the +that will copy both `*.pack` file and corresponding `*.idx` file from the other side may give you a repository that cannot be accessed with your -older version of git. If the `{asterisk}.pack` file is smaller than 2 GB, however, +older version of git. If the `*.pack` file is smaller than 2 GB, however, you can use linkgit:git-index-pack[1] on the *.pack file to regenerate -the `{asterisk}.idx` file. +the `*.idx` file. pack.packSizeLimit:: The maximum size of a pack. This setting only affects packing to a file when repacking, i.e. the git:// protocol - is unaffected. It can be overridden by the `\--max-pack-size` + is unaffected. It can be overridden by the `--max-pack-size` option of linkgit:git-repack[1]. The minimum size allowed is limited to 1 MiB. The default is unlimited. Common unit suffixes of 'k', 'm', or 'g' are @@ -1644,8 +1644,8 @@ pager.<cmd>:: If the value is boolean, turns on or off pagination of the output of a particular git subcommand when writing to a tty. Otherwise, turns on pagination for the subcommand using the - pager specified by the value of `pager.<cmd>`. If `\--paginate` - or `\--no-pager` is specified on the command line, it takes + pager specified by the value of `pager.<cmd>`. If `--paginate` + or `--no-pager` is specified on the command line, it takes precedence over this option. To disable pagination for all commands, set `core.pager` or `GIT_PAGER` to `cat`. @@ -1653,9 +1653,9 @@ pretty.<name>:: Alias for a --pretty= format string, as specified in linkgit:git-log[1]. Any aliases defined here can be used just as the built-in pretty formats could. For example, - running `git config pretty.changelog "format:{asterisk} %H %s"` + running `git config pretty.changelog "format:* %H %s"` would cause the invocation `git log --pretty=changelog` - to be equivalent to running `git log "--pretty=format:{asterisk} %H %s"`. + to be equivalent to running `git log "--pretty=format:* %H %s"`. Note that an alias with the same name as a built-in format will be silently ignored. @@ -1683,12 +1683,30 @@ push.default:: line. Possible values are: + * `nothing` - do not push anything. -* `matching` - push all matching branches. - All branches having the same name in both ends are considered to be - matching. This is the default. +* `matching` - push all branches having the same name in both ends. + This is for those who prepare all the branches into a publishable + shape and then push them out with a single command. It is not + appropriate for pushing into a repository shared by multiple users, + since locally stalled branches will attempt a non-fast forward push + if other users updated the branch. + + + This is currently the default, but Git 2.0 will change the default + to `simple`. * `upstream` - push the current branch to its upstream branch. -* `tracking` - deprecated synonym for `upstream`. + With this, `git push` will update the same remote ref as the one which + is merged by `git pull`, making `push` and `pull` symmetrical. + See "branch.<name>.merge" for how to configure the upstream branch. +* `simple` - like `upstream`, but refuses to push if the upstream + branch's name is different from the local one. This is the safest + option and is well-suited for beginners. It will become the default + in Git 2.0. * `current` - push the current branch to a branch of the same name. + + + The `simple`, `current` and `upstream` modes are for those who want to + push out a single branch after finishing work, even when the other + branches are not yet ready to be pushed out. If you are working with + other people to push into the same shared repository, you would want + to use one of these. rebase.stat:: Whether to show a diffstat of what changed upstream since the last @@ -1768,7 +1786,7 @@ remote.<name>.push:: remote.<name>.mirror:: If true, pushing to this remote will automatically behave - as if the `\--mirror` option was given on the command line. + as if the `--mirror` option was given on the command line. remote.<name>.skipDefaultUpdate:: If true, this remote will be skipped by default when updating diff --git a/Documentation/diff-generate-patch.txt b/Documentation/diff-generate-patch.txt index c57460c..55f499a 100644 --- a/Documentation/diff-generate-patch.txt +++ b/Documentation/diff-generate-patch.txt @@ -175,7 +175,7 @@ In the above example output, the function signature was changed from both files (hence two `-` removals from both file1 and file2, plus `++` to mean one line that was added does not appear in either file1 nor file2). Also eight other lines are the same -from file1 but do not appear in file2 (hence prefixed with `{plus}`). +from file1 but do not appear in file2 (hence prefixed with `+`). When shown by `git diff-tree -c`, it compares the parents of a merge commit with the merge result (i.e. file1..fileN are the diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt index 378f19f..6cfedd8 100644 --- a/Documentation/diff-options.txt +++ b/Documentation/diff-options.txt @@ -74,7 +74,7 @@ These parameters can also be set individually with `--stat-width=<width>`, `--stat-name-width=<name-width>` and `--stat-count=<count>`. --numstat:: - Similar to `\--stat`, but shows number of added and + Similar to `--stat`, but shows number of added and deleted lines in decimal notation and pathname without abbreviation, to make it more machine friendly. For binary files, outputs two `-` instead of saying diff --git a/Documentation/everyday.txt b/Documentation/everyday.txt index ae413e5..048337b 100644 --- a/Documentation/everyday.txt +++ b/Documentation/everyday.txt @@ -98,8 +98,8 @@ you originally wrote. <9> switch to the master branch. <10> merge a topic branch into your master branch. <11> review commit logs; other forms to limit output can be -combined and include `\--max-count=10` (show 10 commits), -`\--until=2005-12-10`, etc. +combined and include `--max-count=10` (show 10 commits), +`--until=2005-12-10`, etc. <12> view only the changes that touch what's in `curses/` directory, since `v2.43` tag. diff --git a/Documentation/git-archive.txt b/Documentation/git-archive.txt index ac7006e..59d73e5 100644 --- a/Documentation/git-archive.txt +++ b/Documentation/git-archive.txt @@ -160,7 +160,7 @@ EXAMPLES Same as above, but the format is inferred from the output file. -`git archive --format=tar --prefix=git-1.4.0/ v1.4.0{caret}\{tree\} | gzip >git-1.4.0.tar.gz`:: +`git archive --format=tar --prefix=git-1.4.0/ v1.4.0^{tree} | gzip >git-1.4.0.tar.gz`:: Create a compressed tarball for v1.4.0 release, but without a global extended pax header. diff --git a/Documentation/git-blame.txt b/Documentation/git-blame.txt index 9516914..7ee9236 100644 --- a/Documentation/git-blame.txt +++ b/Documentation/git-blame.txt @@ -160,7 +160,7 @@ introduced the file with: git log --diff-filter=A --pretty=short -- foo and then annotate the change between the commit and its -parents, using `commit{caret}!` notation: +parents, using `commit^!` notation: git blame -C -C -f $commit^! -- foo diff --git a/Documentation/git-bundle.txt b/Documentation/git-bundle.txt index 92b01ec2..16a6b0a 100644 --- a/Documentation/git-bundle.txt +++ b/Documentation/git-bundle.txt @@ -61,7 +61,7 @@ unbundle <file>:: A list of arguments, acceptable to 'git rev-parse' and 'git rev-list' (and containing a named ref, see SPECIFYING REFERENCES below), that specifies the specific objects and references - to transport. For example, `master{tilde}10..master` causes the + to transport. For example, `master~10..master` causes the current master reference to be packaged along with all objects added since its 10th ancestor commit. There is no explicit limit to the number of references and objects that may be @@ -80,12 +80,12 @@ SPECIFYING REFERENCES 'git bundle' will only package references that are shown by 'git show-ref': this includes heads, tags, and remote heads. References -such as `master{tilde}1` cannot be packaged, but are perfectly suitable for +such as `master~1` cannot be packaged, but are perfectly suitable for defining the basis. More than one reference may be packaged, and more than one basis can be specified. The objects packaged are those not contained in the union of the given bases. Each basis can be -specified explicitly (e.g. `^master{tilde}10`), or implicitly (e.g. -`master{tilde}10..master`, `--since=10.days.ago master`). +specified explicitly (e.g. `^master~10`), or implicitly (e.g. +`master~10..master`, `--since=10.days.ago master`). It is very important that the basis used be held by the destination. It is okay to err on the side of caution, causing the bundle file diff --git a/Documentation/git-check-ref-format.txt b/Documentation/git-check-ref-format.txt index 103e7b1..98009d1 100644 --- a/Documentation/git-check-ref-format.txt +++ b/Documentation/git-check-ref-format.txt @@ -40,9 +40,9 @@ git imposes the following rules on how references are named: . They cannot have ASCII control characters (i.e. bytes whose values are lower than \040, or \177 `DEL`), space, tilde `~`, - caret `{caret}`, or colon `:` anywhere. + caret `^`, or colon `:` anywhere. -. They cannot have question-mark `?`, asterisk `{asterisk}`, or open +. They cannot have question-mark `?`, asterisk `*`, or open bracket `[` anywhere. See the `--refspec-pattern` option below for an exception to this rule. @@ -62,10 +62,10 @@ unquoted (by mistake), and also avoids ambiguities in certain reference name expressions (see linkgit:gitrevisions[7]): . A double-dot `..` is often used as in `ref1..ref2`, and in some - contexts this notation means `{caret}ref1 ref2` (i.e. not in + contexts this notation means `^ref1 ref2` (i.e. not in `ref1` and in `ref2`). -. A tilde `~` and caret `{caret}` are used to introduce the postfix +. A tilde `~` and caret `^` are used to introduce the postfix 'nth parent' and 'peel onion' operation. . A colon `:` is used as in `srcref:dstref` to mean "use srcref\'s @@ -92,9 +92,9 @@ OPTIONS --refspec-pattern:: Interpret <refname> as a reference name pattern for a refspec (as used with remote repositories). If this option is - enabled, <refname> is allowed to contain a single `{asterisk}` + enabled, <refname> is allowed to contain a single `*` in place of a one full pathname component (e.g., - `foo/{asterisk}/bar` but not `foo/bar{asterisk}`). + `foo/*/bar` but not `foo/bar*`). --normalize:: Normalize 'refname' by removing any leading slash (`/`) diff --git a/Documentation/git-checkout.txt b/Documentation/git-checkout.txt index c0a96e6..63a2516 100644 --- a/Documentation/git-checkout.txt +++ b/Documentation/git-checkout.txt @@ -184,7 +184,7 @@ the conflicted merge in the specified paths. + This means that you can use `git checkout -p` to selectively discard edits from your current working tree. See the ``Interactive Mode'' -section of linkgit:git-add[1] to learn how to operate the `\--patch` mode. +section of linkgit:git-add[1] to learn how to operate the `--patch` mode. <branch>:: Branch to checkout; if it refers to a branch (i.e., a name that, @@ -193,11 +193,11 @@ section of linkgit:git-add[1] to learn how to operate the `\--patch` mode. commit, your HEAD becomes "detached" and you are no longer on any branch (see below for details). + -As a special case, the `"@\{-N\}"` syntax for the N-th last branch +As a special case, the `"@{-N}"` syntax for the N-th last branch checks out the branch (instead of detaching). You may also specify -`-` which is synonymous with `"@\{-1\}"`. +`-` which is synonymous with `"@{-1}"`. + -As a further special case, you may use `"A\...B"` as a shortcut for the +As a further special case, you may use `"A...B"` as a shortcut for the merge base of `A` and `B` if there is exactly one merge base. You can leave out at most one of `A` and `B`, in which case it defaults to `HEAD`. diff --git a/Documentation/git-cherry-pick.txt b/Documentation/git-cherry-pick.txt index 3d25a20..9f3dae6 100644 --- a/Documentation/git-cherry-pick.txt +++ b/Documentation/git-cherry-pick.txt @@ -149,7 +149,7 @@ EXAMPLES Apply the changes introduced by all commits that are ancestors of master but not of HEAD to produce new commits. -`git cherry-pick master{tilde}4 master{tilde}2`:: +`git cherry-pick master~4 master~2`:: Apply the changes introduced by the fifth and third last commits pointed to by master and create 2 new commits with @@ -170,7 +170,7 @@ EXAMPLES are in next but not HEAD to the current branch, creating a new commit for each new change. -`git rev-list --reverse master \-- README | git cherry-pick -n --stdin`:: +`git rev-list --reverse master -- README | git cherry-pick -n --stdin`:: Apply the changes introduced by all commits on the master branch that touched README to the working tree and index, diff --git a/Documentation/git-commit.txt b/Documentation/git-commit.txt index 68abfca..2d695f6 100644 --- a/Documentation/git-commit.txt +++ b/Documentation/git-commit.txt @@ -42,7 +42,7 @@ The content to be added can be specified in several ways: 5. by using the --interactive or --patch switches with the 'commit' command to decide one by one which files or hunks should be part of the commit, - before finalizing the operation. See the ``Interactive Mode`` section of + before finalizing the operation. See the ``Interactive Mode'' section of linkgit:git-add[1] to learn how to operate these modes. The `--dry-run` option can be used to obtain a @@ -287,7 +287,7 @@ When recording your own work, the contents of modified files in your working tree are temporarily stored to a staging area called the "index" with 'git add'. A file can be reverted back, only in the index but not in the working tree, -to that of the last commit with `git reset HEAD \-- <file>`, +to that of the last commit with `git reset HEAD -- <file>`, which effectively reverts 'git add' and prevents the changes to this file from participating in the next commit. After building the state to be committed incrementally with these commands, diff --git a/Documentation/git-cvsserver.txt b/Documentation/git-cvsserver.txt index 827bc98..88d814a 100644 --- a/Documentation/git-cvsserver.txt +++ b/Documentation/git-cvsserver.txt @@ -252,7 +252,7 @@ Configuring database backend 'git-cvsserver' uses the Perl DBI module. Please also read its documentation if changing these variables, especially -about `DBI\->connect()`. +about `DBI->connect()`. gitcvs.dbname:: Database name. The exact meaning depends on the diff --git a/Documentation/git-fast-export.txt b/Documentation/git-fast-export.txt index f37eada..d6487e1 100644 --- a/Documentation/git-fast-export.txt +++ b/Documentation/git-fast-export.txt @@ -104,7 +104,7 @@ marks the same across runs. [<git-rev-list-args>...]:: A list of arguments, acceptable to 'git rev-parse' and 'git rev-list', that specifies the specific objects and references - to export. For example, `master{tilde}10..master` causes the + to export. For example, `master~10..master` causes the current master reference to be exported along with all objects added since its 10th ancestor commit. diff --git a/Documentation/git-fast-import.txt b/Documentation/git-fast-import.txt index b52dca5..2620d28 100644 --- a/Documentation/git-fast-import.txt +++ b/Documentation/git-fast-import.txt @@ -479,9 +479,9 @@ current branch value should be written as: ---- from refs/heads/branch^0 ---- -The `{caret}0` suffix is necessary as fast-import does not permit a branch to +The `^0` suffix is necessary as fast-import does not permit a branch to start from itself, and the branch is created in memory before the -`from` command is even read from the input. Adding `{caret}0` will force +`from` command is even read from the input. Adding `^0` will force fast-import to resolve the commit through Git's revision parsing library, rather than its internal branch table, thereby loading in the existing value of the branch. @@ -979,7 +979,7 @@ Reading from a named tree:: See `filemodify` above for a detailed description of `<path>`. -Output uses the same format as `git ls-tree <tree> {litdd} <path>`: +Output uses the same format as `git ls-tree <tree> -- <path>`: ==== <mode> SP ('blob' | 'tree' | 'commit') SP <dataref> HT <path> LF diff --git a/Documentation/git-filter-branch.txt b/Documentation/git-filter-branch.txt index 0f2f117..81f5823 100644 --- a/Documentation/git-filter-branch.txt +++ b/Documentation/git-filter-branch.txt @@ -96,8 +96,8 @@ OPTIONS --index-filter <command>:: This is the filter for rewriting the index. It is similar to the tree filter but does not check out the tree, which makes it much - faster. Frequently used with `git rm \--cached - \--ignore-unmatch ...`, see EXAMPLES below. For hairy + faster. Frequently used with `git rm --cached + --ignore-unmatch ...`, see EXAMPLES below. For hairy cases, see linkgit:git-update-index[1]. --parent-filter <command>:: @@ -222,11 +222,11 @@ However, if the file is absent from the tree of some commit, a simple `rm filename` will fail for that tree and commit. Thus you may instead want to use `rm -f filename` as the script. -Using `\--index-filter` with 'git rm' yields a significantly faster +Using `--index-filter` with 'git rm' yields a significantly faster version. Like with using `rm filename`, `git rm --cached filename` will fail if the file is absent from the tree of a commit. If you want to "completely forget" a file, it does not matter when it entered -history, so we also add `\--ignore-unmatch`: +history, so we also add `--ignore-unmatch`: -------------------------------------------------------------------------- git filter-branch --index-filter 'git rm --cached --ignore-unmatch filename' HEAD @@ -242,8 +242,8 @@ git filter-branch --subdirectory-filter foodir -- --all ------------------------------------------------------- Thus you can, e.g., turn a library subdirectory into a repository of -its own. Note the `\--` that separates 'filter-branch' options from -revision options, and the `\--all` to rewrite all branches and tags. +its own. Note the `--` that separates 'filter-branch' options from +revision options, and the `--all` to rewrite all branches and tags. To set a commit (which typically is at the tip of another history) to be the parent of the current initial commit, in @@ -371,23 +371,23 @@ Checklist for Shrinking a Repository ------------------------------------ git-filter-branch is often used to get rid of a subset of files, -usually with some combination of `\--index-filter` and -`\--subdirectory-filter`. People expect the resulting repository to +usually with some combination of `--index-filter` and +`--subdirectory-filter`. People expect the resulting repository to be smaller than the original, but you need a few more steps to actually make it smaller, because git tries hard not to lose your objects until you tell it to. First make sure that: * You really removed all variants of a filename, if a blob was moved - over its lifetime. `git log \--name-only \--follow \--all \-- - filename` can help you find renames. + over its lifetime. `git log --name-only --follow --all -- filename` + can help you find renames. -* You really filtered all refs: use `\--tag-name-filter cat \-- - \--all` when calling git-filter-branch. +* You really filtered all refs: use `--tag-name-filter cat -- --all` + when calling git-filter-branch. Then there are two ways to get a smaller repository. A safer way is to clone, that keeps your original intact. -* Clone it with `git clone +++file:///path/to/repo+++`. The clone +* Clone it with `git clone file:///path/to/repo`. The clone will not have the removed objects. See linkgit:git-clone[1]. (Note that cloning with a plain path just hardlinks everything!) @@ -397,14 +397,14 @@ approach, so *make a backup* or go back to cloning it. You have been warned. * Remove the original refs backed up by git-filter-branch: say `git - for-each-ref \--format="%(refname)" refs/original/ | xargs -n 1 git + for-each-ref --format="%(refname)" refs/original/ | xargs -n 1 git update-ref -d`. -* Expire all reflogs with `git reflog expire \--expire=now \--all`. +* Expire all reflogs with `git reflog expire --expire=now --all`. -* Garbage collect all unreferenced objects with `git gc \--prune=now` +* Garbage collect all unreferenced objects with `git gc --prune=now` (or if your git-gc is not new enough to support arguments to - `\--prune`, use `git repack -ad; git prune` instead). + `--prune`, use `git repack -ad; git prune` instead). GIT --- diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt index 6ea9be7..04c7346 100644 --- a/Documentation/git-format-patch.txt +++ b/Documentation/git-format-patch.txt @@ -45,7 +45,7 @@ There are two ways to specify which commits to operate on. The first rule takes precedence in the case of a single <commit>. To apply the second rule, i.e., format everything since the beginning of history up until <commit>, use the '\--root' option: `git format-patch -\--root <commit>`. If you want to format only <commit> itself, you +--root <commit>`. If you want to format only <commit> itself, you can do this with `git format-patch -1 <commit>`. By default, each output file is numbered sequentially from 1, and uses the @@ -134,7 +134,7 @@ include::diff-options.txt[] The optional <style> argument can be either `shallow` or `deep`. 'shallow' threading makes every mail a reply to the head of the series, where the head is chosen from the cover letter, the -`\--in-reply-to`, and the first patch mail, in this order. 'deep' +`--in-reply-to`, and the first patch mail, in this order. 'deep' threading makes every mail a reply to the previous one. + The default is `--no-thread`, unless the 'format.thread' configuration diff --git a/Documentation/git-gc.txt b/Documentation/git-gc.txt index 815afcb..b370b02 100644 --- a/Documentation/git-gc.txt +++ b/Documentation/git-gc.txt @@ -84,7 +84,7 @@ The optional configuration variable 'gc.reflogExpireUnreachable' can be set to indicate how long historical reflog entries which are not part of the current branch should remain available in this repository. These types of entries are generally created as -a result of using `git commit \--amend` or `git rebase` and are the +a result of using `git commit --amend` or `git rebase` and are the commits prior to the amend or rebase occurring. Since these changes are not part of the current project most users will want to expire them sooner. This option defaults to '30 days'. diff --git a/Documentation/git-grep.txt b/Documentation/git-grep.txt index 343eadd..4785f1c 100644 --- a/Documentation/git-grep.txt +++ b/Documentation/git-grep.txt @@ -247,11 +247,11 @@ OPTIONS Examples -------- -`git grep {apostrophe}time_t{apostrophe} \-- {apostrophe}*.[ch]{apostrophe}`:: +`git grep 'time_t' -- '*.[ch]'`:: Looks for `time_t` in all tracked .c and .h files in the working directory and its subdirectories. -`git grep -e {apostrophe}#define{apostrophe} --and \( -e MAX_PATH -e PATH_MAX \)`:: +`git grep -e '#define' --and \( -e MAX_PATH -e PATH_MAX \)`:: Looks for a line that has `#define` and either `MAX_PATH` or `PATH_MAX`. diff --git a/Documentation/git-log.txt b/Documentation/git-log.txt index 249fc87..1f90620 100644 --- a/Documentation/git-log.txt +++ b/Documentation/git-log.txt @@ -100,7 +100,7 @@ Examples Show all commits since version 'v2.6.12' that changed any file in the include/scsi or drivers/scsi subdirectories -`git log --since="2 weeks ago" \-- gitk`:: +`git log --since="2 weeks ago" -- gitk`:: Show the changes during the last two weeks to the file 'gitk'. The "--" is necessary to avoid confusion with the *branch* named diff --git a/Documentation/git-notes.txt b/Documentation/git-notes.txt index e8319ea..b95aafa 100644 --- a/Documentation/git-notes.txt +++ b/Documentation/git-notes.txt @@ -70,7 +70,7 @@ copy:: second object). This subcommand is equivalent to: `git notes add [-f] -C $(git notes list <from-object>) <to-object>` + -In `\--stdin` mode, take lines in the format +In `--stdin` mode, take lines in the format + ---------- <from-object> SP <to-object> [ SP <rest> ] LF diff --git a/Documentation/git-pack-refs.txt b/Documentation/git-pack-refs.txt index a3c6677..10afd4e 100644 --- a/Documentation/git-pack-refs.txt +++ b/Documentation/git-pack-refs.txt @@ -32,7 +32,7 @@ Subsequent updates to branches always create new files under A recommended practice to deal with a repository with too many refs is to pack its refs with `--all --prune` once, and -occasionally run `git pack-refs \--prune`. Tags are by +occasionally run `git pack-refs --prune`. Tags are by definition stationary and are not expected to change. Branch heads will be packed with the initial `pack-refs --all`, but only the currently active branch heads will become unpacked, diff --git a/Documentation/git-pull.txt b/Documentation/git-pull.txt index 0f18ec8..defb544 100644 --- a/Documentation/git-pull.txt +++ b/Documentation/git-pull.txt @@ -110,7 +110,7 @@ include::merge-options.txt[] + See `pull.rebase`, `branch.<name>.rebase` and `branch.autosetuprebase` in linkgit:git-config[1] if you want to make `git pull` always use -`{litdd}rebase` instead of merging. +`--rebase` instead of merging. + [NOTE] This is a potentially _dangerous_ mode of operation. diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt index a52b7b1..cb97cc1 100644 --- a/Documentation/git-push.txt +++ b/Documentation/git-push.txt @@ -34,7 +34,7 @@ OPTIONS[[OPTIONS]] <refspec>...:: The format of a <refspec> parameter is an optional plus - `{plus}`, followed by the source ref <src>, followed + `+`, followed by the source ref <src>, followed by a colon `:`, followed by the destination ref <dst>. It is used to specify with what <src> object the <dst> ref in the remote repository is to be updated. @@ -50,7 +50,7 @@ updated. + The object referenced by <src> is used to update the <dst> reference on the remote side, but by default this is only allowed if the -update can fast-forward <dst>. By having the optional leading `{plus}`, +update can fast-forward <dst>. By having the optional leading `+`, you can tell git to update the <dst> ref even when the update is not a fast-forward. This does *not* attempt to merge <src> into <dst>. See EXAMPLES below for details. @@ -60,7 +60,7 @@ EXAMPLES below for details. Pushing an empty <src> allows you to delete the <dst> ref from the remote repository. + -The special refspec `:` (or `{plus}:` to allow non-fast-forward updates) +The special refspec `:` (or `+:` to allow non-fast-forward updates) directs git to push "matching" branches: for every branch that exists on the local side, the remote side is updated if a branch of the same name already exists on the remote side. This is the default operation mode @@ -75,7 +75,7 @@ nor in any Push line of the corresponding remotes file---see below). Remove remote branches that don't have a local counterpart. For example a remote branch `tmp` will be removed if a local branch with the same name doesn't exist any more. This also respects refspecs, e.g. - `git push --prune remote refs/heads/{asterisk}:refs/tmp/{asterisk}` would + `git push --prune remote refs/heads/*:refs/tmp/*` would make sure that remote `refs/tmp/foo` will be removed if `refs/heads/foo` doesn't exist. @@ -210,7 +210,7 @@ option is used. flag:: A single character indicating the status of the ref: (space);; for a successfully pushed fast-forward; -`{plus}`;; for a successful forced update; +`+`;; for a successful forced update; `-`;; for a successfully deleted ref; `*`;; for a successfully pushed new ref; `!`;; for a ref that was rejected or failed to push; and @@ -220,7 +220,7 @@ summary:: For a successfully pushed ref, the summary shows the old and new values of the ref in a form suitable for using as an argument to `git log` (this is `<old>..<new>` in most cases, and - `<old>\...<new>` for forced non-fast-forward updates). + `<old>...<new>` for forced non-fast-forward updates). + For a failed update, more details are given: + @@ -402,7 +402,7 @@ the ones in the examples below) can be configured as the default for Find a ref that matches `experimental` in the `origin` repository (e.g. `refs/heads/experimental`), and delete it. -`git push origin {plus}dev:master`:: +`git push origin +dev:master`:: Update the origin repository's master branch with the dev branch, allowing non-fast-forward updates. *This can leave unreferenced commits dangling in the origin repository.* Consider the diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index 841ebd6..147fa1a 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -271,7 +271,7 @@ which makes little sense. -X <strategy-option>:: --strategy-option=<strategy-option>:: Pass the <strategy-option> through to the merge strategy. - This implies `\--merge` and, if no strategy has been + This implies `--merge` and, if no strategy has been specified, `-s recursive`. Note the reversal of 'ours' and 'theirs' as noted in above for the `-m` option. @@ -615,8 +615,8 @@ Easy case: The changes are literally the same.:: Hard case: The changes are not the same.:: This happens if the 'subsystem' rebase had conflicts, or used - `\--interactive` to omit, edit, squash, or fixup commits; or - if the upstream used one of `commit \--amend`, `reset`, or + `--interactive` to omit, edit, squash, or fixup commits; or + if the upstream used one of `commit --amend`, `reset`, or `filter-branch`. @@ -652,7 +652,7 @@ correspond to the ones before the rebase. NOTE: While an "easy case recovery" sometimes appears to be successful even in the hard case, it may have unintended consequences. For example, a commit that was removed via `git rebase - \--interactive` will be **resurrected**! + --interactive` will be **resurrected**! The idea is to manually tell 'git rebase' "where the old 'subsystem' ended and your 'topic' began", that is, what the old merge-base @@ -660,7 +660,7 @@ between them was. You will have to find a way to name the last commit of the old 'subsystem', for example: * With the 'subsystem' reflog: after 'git fetch', the old tip of - 'subsystem' is at `subsystem@\{1}`. Subsequent fetches will + 'subsystem' is at `subsystem@{1}`. Subsequent fetches will increase the number. (See linkgit:git-reflog[1].) * Relative to the tip of 'topic': knowing that your 'topic' has three diff --git a/Documentation/git-reflog.txt b/Documentation/git-reflog.txt index 976dc14..7fe2d22 100644 --- a/Documentation/git-reflog.txt +++ b/Documentation/git-reflog.txt @@ -39,13 +39,13 @@ as well). It is an alias for `git log -g --abbrev-commit --pretty=oneline`; see linkgit:git-log[1]. The reflog is useful in various git commands, to specify the old value -of a reference. For example, `HEAD@\{2\}` means "where HEAD used to be -two moves ago", `master@\{one.week.ago\}` means "where master used to +of a reference. For example, `HEAD@{2}` means "where HEAD used to be +two moves ago", `master@{one.week.ago}` means "where master used to point to one week ago", and so on. See linkgit:gitrevisions[7] for more details. To delete single entries from the reflog, use the subcommand "delete" -and specify the _exact_ entry (e.g. "`git reflog delete master@\{2\}`"). +and specify the _exact_ entry (e.g. "`git reflog delete master@{2}`"). OPTIONS diff --git a/Documentation/git-remote-helpers.txt b/Documentation/git-remote-helpers.txt index 674797c..f5836e4 100644 --- a/Documentation/git-remote-helpers.txt +++ b/Documentation/git-remote-helpers.txt @@ -87,7 +87,7 @@ to the `capabilities` command (see COMMANDS, below). capability use this. + A helper advertising the capability -`refspec refs/heads/{asterisk}:refs/svn/origin/branches/{asterisk}` +`refspec refs/heads/*:refs/svn/origin/branches/*` is saying that, when it is asked to `import refs/heads/topic`, the stream it outputs will update the `refs/svn/origin/branches/topic` ref. @@ -96,7 +96,7 @@ This capability can be advertised multiple times. The first applicable refspec takes precedence. The left-hand of refspecs advertised with this capability must cover all refs reported by the list command. If no 'refspec' capability is advertised, -there is an implied `refspec {asterisk}:{asterisk}`. +there is an implied `refspec *:*`. Capabilities for Pushing ~~~~~~~~~~~~~~~~~~~~~~~~ @@ -148,7 +148,7 @@ Other frontends may have some other order of preference. This modifies the 'import' capability. + A helper advertising -`refspec refs/heads/{asterisk}:refs/svn/origin/branches/{asterisk}` +`refspec refs/heads/*:refs/svn/origin/branches/*` in its capabilities is saying that, when it handles `import refs/heads/topic`, the stream it outputs will update the `refs/svn/origin/branches/topic` ref. @@ -157,7 +157,7 @@ This capability can be advertised multiple times. The first applicable refspec takes precedence. The left-hand of refspecs advertised with this capability must cover all refs reported by the list command. If no 'refspec' capability is advertised, -there is an implied `refspec {asterisk}:{asterisk}`. +there is an implied `refspec *:*`. INVOCATION ---------- diff --git a/Documentation/git-remote.txt b/Documentation/git-remote.txt index d376d19..a308f4c 100644 --- a/Documentation/git-remote.txt +++ b/Documentation/git-remote.txt @@ -67,14 +67,14 @@ multiple branches without grabbing all branches. With `-m <master>` option, a symbolic-ref `refs/remotes/<name>/HEAD` is set up to point at remote's `<master>` branch. See also the set-head command. + -When a fetch mirror is created with `\--mirror=fetch`, the refs will not +When a fetch mirror is created with `--mirror=fetch`, the refs will not be stored in the 'refs/remotes/' namespace, but rather everything in 'refs/' on the remote will be directly mirrored into 'refs/' in the local repository. This option only makes sense in bare repositories, because a fetch would overwrite any local commits. + -When a push mirror is created with `\--mirror=push`, then `git push` -will always behave as if `\--mirror` was passed. +When a push mirror is created with `--mirror=push`, then `git push` +will always behave as if `--mirror` was passed. 'rename':: diff --git a/Documentation/git-rerere.txt b/Documentation/git-rerere.txt index b43b7c8..a62227f 100644 --- a/Documentation/git-rerere.txt +++ b/Documentation/git-rerere.txt @@ -101,15 +101,15 @@ One way to do it is to pull master into the topic branch: The commits marked with `*` touch the same area in the same file; you need to resolve the conflicts when creating the commit -marked with `{plus}`. Then you can test the result to make sure your +marked with `+`. Then you can test the result to make sure your work-in-progress still works with what is in the latest master. After this test merge, there are two ways to continue your work on the topic. The easiest is to build on top of the test merge -commit `{plus}`, and when your work in the topic branch is finally +commit `+`, and when your work in the topic branch is finally ready, pull the topic branch into master, and/or ask the upstream to pull from you. By that time, however, the master or -the upstream might have been advanced since the test merge `{plus}`, +the upstream might have been advanced since the test merge `+`, in which case the final commit graph would look like this: ------------ diff --git a/Documentation/git-reset.txt b/Documentation/git-reset.txt index b674866..117e374 100644 --- a/Documentation/git-reset.txt +++ b/Documentation/git-reset.txt @@ -41,7 +41,7 @@ working tree in one go. + This means that `git reset -p` is the opposite of `git add -p`, i.e. you can use it to selectively reset hunks. See the ``Interactive Mode'' -section of linkgit:git-add[1] to learn how to operate the `\--patch` mode. +section of linkgit:git-add[1] to learn how to operate the `--patch` mode. 'git reset' --<mode> [<commit>]:: This form resets the current branch head to <commit> and diff --git a/Documentation/git-rev-parse.txt b/Documentation/git-rev-parse.txt index 8023dc0..f63b81a 100644 --- a/Documentation/git-rev-parse.txt +++ b/Documentation/git-rev-parse.txt @@ -113,15 +113,14 @@ OPTIONS + If a `pattern` is given, only refs matching the given shell glob are shown. If the pattern does not contain a globbing character (`?`, -`{asterisk}`, or `[`), it is turned into a prefix match by -appending `/{asterisk}`. +`*`, or `[`), it is turned into a prefix match by appending `/*`. --glob=pattern:: Show all refs matching the shell glob pattern `pattern`. If the pattern does not start with `refs/`, this is automatically prepended. If the pattern does not contain a globbing - character (`?`, `{asterisk}`, or `[`), it is turned into a prefix - match by appending `/{asterisk}`. + character (`?`, `*`, or `[`), it is turned into a prefix + match by appending `/*`. --show-toplevel:: Show the absolute path of the top-level directory. diff --git a/Documentation/git-revert.txt b/Documentation/git-revert.txt index b699a34..70152e8 100644 --- a/Documentation/git-revert.txt +++ b/Documentation/git-revert.txt @@ -27,7 +27,7 @@ throw away all uncommitted changes in your working directory, you should see linkgit:git-reset[1], particularly the '--hard' option. If you want to extract specific files as they were in another commit, you should see linkgit:git-checkout[1], specifically the `git checkout -<commit> \-- <filename>` syntax. Take care with these alternatives as +<commit> -- <filename>` syntax. Take care with these alternatives as both will discard uncommitted changes in your working directory. OPTIONS @@ -105,7 +105,7 @@ EXAMPLES Revert the changes specified by the fourth last commit in HEAD and create a new commit with the reverted changes. -`git revert -n master{tilde}5..master{tilde}2`:: +`git revert -n master~5..master~2`:: Revert the changes done by commits from the fifth last commit in master (included) to the third last commit in master diff --git a/Documentation/git-rm.txt b/Documentation/git-rm.txt index 665ad4d..5d31860 100644 --- a/Documentation/git-rm.txt +++ b/Documentation/git-rm.txt @@ -79,8 +79,7 @@ a file that you have not told git about does not remove that file. File globbing matches across directory boundaries. Thus, given two directories `d` and `d2`, there is a difference between -using `git rm {apostrophe}d{asterisk}{apostrophe}` and -`git rm {apostrophe}d/{asterisk}{apostrophe}`, as the former will +using `git rm 'd*'` and `git rm 'd/*'`, as the former will also remove all of directory `d2`. REMOVING FILES THAT HAVE DISAPPEARED FROM THE FILESYSTEM diff --git a/Documentation/git-shortlog.txt b/Documentation/git-shortlog.txt index ff3755b..01d8417 100644 --- a/Documentation/git-shortlog.txt +++ b/Documentation/git-shortlog.txt @@ -47,7 +47,7 @@ OPTIONS --format[=<format>]:: Instead of the commit subject, use some other information to describe each commit. '<format>' can be any string accepted - by the `--format` option of 'git log', such as '{asterisk} [%h] %s'. + by the `--format` option of 'git log', such as '* [%h] %s'. (See the "PRETTY FORMATS" section of linkgit:git-log[1].) Each pretty-printed commit will be rewrapped before it is shown. diff --git a/Documentation/git-show-ref.txt b/Documentation/git-show-ref.txt index fcee000..5dbcd47 100644 --- a/Documentation/git-show-ref.txt +++ b/Documentation/git-show-ref.txt @@ -73,7 +73,7 @@ OPTIONS --exclude-existing[=<pattern>]:: Make 'git show-ref' act as a filter that reads refs from stdin of the - form "`{caret}(?:<anything>\s)?<refname>(?:{backslash}{caret}{})?$`" + form "`^(?:<anything>\s)?<refname>(?:\^{})?$`" and performs the following actions on each: (1) strip "{caret}{}" at the end of line if any; (2) ignore if pattern is provided and does not head-match refname; diff --git a/Documentation/git-show.txt b/Documentation/git-show.txt index 1e38819..ae4edcc 100644 --- a/Documentation/git-show.txt +++ b/Documentation/git-show.txt @@ -52,10 +52,10 @@ EXAMPLES Shows the tag `v1.0.0`, along with the object the tags points at. -`git show v1.0.0^\{tree\}`:: +`git show v1.0.0^{tree}`:: Shows the tree pointed to by the tag `v1.0.0`. -`git show -s --format=%s v1.0.0^\{commit\}`:: +`git show -s --format=%s v1.0.0^{commit}`:: Shows the subject of the commit pointed to by the tag `v1.0.0`. diff --git a/Documentation/git-stash.txt b/Documentation/git-stash.txt index 43af38a..0aa4e20 100644 --- a/Documentation/git-stash.txt +++ b/Documentation/git-stash.txt @@ -36,8 +36,8 @@ you create one. The latest stash you created is stored in `refs/stash`; older stashes are found in the reflog of this reference and can be named using -the usual reflog syntax (e.g. `stash@\{0}` is the most recently -created stash, `stash@\{1}` is the one before it, `stash@\{2.hours.ago}` +the usual reflog syntax (e.g. `stash@{0}` is the most recently +created stash, `stash@{1}` is the one before it, `stash@{2.hours.ago}` is also possible). OPTIONS @@ -66,7 +66,7 @@ constructed such that its index state is the same as the index state of your repository, and its worktree contains only the changes you selected interactively. The selected changes are then rolled back from your worktree. See the ``Interactive Mode'' section of -linkgit:git-add[1] to learn how to operate the `\--patch` mode. +linkgit:git-add[1] to learn how to operate the `--patch` mode. + The `--patch` option implies `--keep-index`. You can use `--no-keep-index` to override this. @@ -74,7 +74,7 @@ The `--patch` option implies `--keep-index`. You can use list [<options>]:: List the stashes that you currently have. Each 'stash' is listed - with its name (e.g. `stash@\{0}` is the latest stash, `stash@\{1}` is + with its name (e.g. `stash@{0}` is the latest stash, `stash@{1}` is the one before, etc.), the name of the branch that was current when the stash was made, and a short description of the commit the stash was based on. @@ -93,7 +93,7 @@ show [<stash>]:: stashed state and its original parent. When no `<stash>` is given, shows the latest one. By default, the command shows the diffstat, but it will accept any format known to 'git diff' (e.g., `git stash show - -p stash@\{1}` to view the second most recent stash in patch form). + -p stash@{1}` to view the second most recent stash in patch form). pop [--index] [-q|--quiet] [<stash>]:: @@ -111,8 +111,8 @@ tree's changes, but also the index's ones. However, this can fail, when you have conflicts (which are stored in the index, where you therefore can no longer apply the changes as they were originally). + -When no `<stash>` is given, `stash@\{0}` is assumed, otherwise `<stash>` must -be a reference of the form `stash@\{<revision>}`. +When no `<stash>` is given, `stash@{0}` is assumed, otherwise `<stash>` must +be a reference of the form `stash@{<revision>}`. apply [--index] [-q|--quiet] [<stash>]:: @@ -143,9 +143,9 @@ clear:: drop [-q|--quiet] [<stash>]:: Remove a single stashed state from the stash list. When no `<stash>` - is given, it removes the latest one. i.e. `stash@\{0}`, otherwise + is given, it removes the latest one. i.e. `stash@{0}`, otherwise `<stash>` must a valid stash log reference of the form - `stash@\{<revision>}`. + `stash@{<revision>}`. create:: diff --git a/Documentation/git-status.txt b/Documentation/git-status.txt index 3d51717..a29aae6 100644 --- a/Documentation/git-status.txt +++ b/Documentation/git-status.txt @@ -98,12 +98,12 @@ In the short-format, the status of each path is shown as XY PATH1 -> PATH2 -where `PATH1` is the path in the `HEAD`, and the ` \-> PATH2` part is +where `PATH1` is the path in the `HEAD`, and the " `-> PATH2`" part is shown only when `PATH1` corresponds to a different path in the index/worktree (i.e. the file is renamed). The 'XY' is a two-letter status code. -The fields (including the `\->`) are separated from each other by a +The fields (including the `->`) are separated from each other by a single space. If a filename contains whitespace or other nonprintable characters, that field will be quoted in the manner of a C string literal: surrounded by ASCII double quote (34) characters, and with diff --git a/Documentation/git-tar-tree.txt b/Documentation/git-tar-tree.txt index 346e7a2..f7362dc 100644 --- a/Documentation/git-tar-tree.txt +++ b/Documentation/git-tar-tree.txt @@ -63,7 +63,7 @@ EXAMPLES Create a tarball for v1.4.0 release. -`git tar-tree v1.4.0{caret}\{tree\} git-1.4.0 | gzip >git-1.4.0.tar.gz`:: +`git tar-tree v1.4.0^{tree} git-1.4.0 | gzip >git-1.4.0.tar.gz`:: Create a tarball for v1.4.0 release, but without a global extended pax header. diff --git a/Documentation/git-update-index.txt b/Documentation/git-update-index.txt index a3081f4..9d0b151 100644 --- a/Documentation/git-update-index.txt +++ b/Documentation/git-update-index.txt @@ -19,7 +19,7 @@ SYNOPSIS [--ignore-submodules] [--really-refresh] [--unresolve] [--again | -g] [--info-only] [--index-info] - [-z] [--stdin] + [-z] [--stdin] [--index-version <n>] [--verbose] [--] [<file>...] @@ -143,6 +143,10 @@ you will need to handle the situation manually. --verbose:: Report what is being added and removed from index. +--index-version <n>:: + Write the resulting index out in the named on-disk format version. + The current default version is 2. + -z:: Only meaningful with `--stdin` or `--index-info`; paths are separated with NUL character instead of LF. diff --git a/Documentation/git-whatchanged.txt b/Documentation/git-whatchanged.txt index 76c7f7e..6c8f510 100644 --- a/Documentation/git-whatchanged.txt +++ b/Documentation/git-whatchanged.txt @@ -58,7 +58,7 @@ Examples Show as patches the commits since version 'v2.6.12' that changed any file in the include/scsi or drivers/scsi subdirectories -`git whatchanged --since="2 weeks ago" \-- gitk`:: +`git whatchanged --since="2 weeks ago" -- gitk`:: Show the changes during the last two weeks to the file 'gitk'. The "--" is necessary to avoid confusion with the *branch* named diff --git a/Documentation/git.txt b/Documentation/git.txt index c2b523c..8527775 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -44,9 +44,10 @@ unreleased) version of git, that is available from 'master' branch of the `git.git` repository. Documentation for older releases are available here: -* link:v1.7.10/git.html[documentation for release 1.7.10] +* link:v1.7.10.1/git.html[documentation for release 1.7.10.1] * release notes for + link:RelNotes/1.7.10.1.txt[1.7.10.1], link:RelNotes/1.7.10.txt[1.7.10]. * link:v1.7.9.7/git.html[documentation for release 1.7.9.7] diff --git a/Documentation/gitcli.txt b/Documentation/gitcli.txt index f734f97..ea17f7a 100644 --- a/Documentation/gitcli.txt +++ b/Documentation/gitcli.txt @@ -25,22 +25,22 @@ arguments. Here are the rules: are paths. * When an argument can be misunderstood as either a revision or a path, - they can be disambiguated by placing `\--` between them. - E.g. `git diff \-- HEAD` is, "I have a file called HEAD in my work + they can be disambiguated by placing `--` between them. + E.g. `git diff -- HEAD` is, "I have a file called HEAD in my work tree. Please show changes between the version I staged in the index and what I have in the work tree for that file". not "show difference between the HEAD commit and the work tree as a whole". You can say - `git diff HEAD \--` to ask for the latter. + `git diff HEAD --` to ask for the latter. - * Without disambiguating `\--`, git makes a reasonable guess, but errors + * Without disambiguating `--`, git makes a reasonable guess, but errors out and asking you to disambiguate when ambiguous. E.g. if you have a file called HEAD in your work tree, `git diff HEAD` is ambiguous, and - you have to say either `git diff HEAD \--` or `git diff \-- HEAD` to + you have to say either `git diff HEAD --` or `git diff -- HEAD` to disambiguate. When writing a script that is expected to handle random user-input, it is a good practice to make it explicit which arguments are which by placing -disambiguating `\--` at appropriate places. +disambiguating `--` at appropriate places. Here are the rules regarding the "flags" that you should follow when you are scripting git: diff --git a/Documentation/gitcore-tutorial.txt b/Documentation/gitcore-tutorial.txt index fb0d569..f5074a8 100644 --- a/Documentation/gitcore-tutorial.txt +++ b/Documentation/gitcore-tutorial.txt @@ -151,8 +151,8 @@ to your working tree, you use the 'git update-index' program. That program normally just takes a list of filenames you want to update, but to avoid trivial mistakes, it refuses to add new entries to the index (or remove existing ones) unless you explicitly tell it that you're -adding a new entry with the `\--add` flag (or removing an entry with the -`\--remove`) flag. +adding a new entry with the `--add` flag (or removing an entry with the +`--remove`) flag. So to populate the index with the two files you just created, you can do @@ -399,10 +399,10 @@ $ git diff HEAD which ends up doing the above for you. In other words, 'git diff-index' normally compares a tree against the -working tree, but when given the `\--cached` flag, it is told to +working tree, but when given the `--cached` flag, it is told to instead compare against just the index cache contents, and ignore the current working tree state entirely. Since we just wrote the index -file to HEAD, doing `git diff-index \--cached -p HEAD` should thus return +file to HEAD, doing `git diff-index --cached -p HEAD` should thus return an empty set of differences, and that's exactly what it does. [NOTE] @@ -411,7 +411,7 @@ an empty set of differences, and that's exactly what it does. comparisons, and saying that it compares a tree against the working tree is thus not strictly accurate. In particular, the list of files to compare (the "meta-data") *always* comes from the index file, -regardless of whether the `\--cached` flag is used or not. The `\--cached` +regardless of whether the `--cached` flag is used or not. The `--cached` flag really only determines whether the file *contents* to be compared come from the working tree or not. @@ -433,7 +433,7 @@ update the index cache: $ git update-index hello ------------------------------------------------ -(note how we didn't need the `\--add` flag this time, since git knew +(note how we didn't need the `--add` flag this time, since git knew about the file already). Note what happens to the different 'git diff-{asterisk}' versions here. @@ -560,7 +560,7 @@ short history. When using the above two commands, the initial commit will be shown. If this is a problem because it is huge, you can hide it by setting the log.showroot configuration variable to false. Having this, you -can still show it for each command just adding the `\--root` option, +can still show it for each command just adding the `--root` option, which is a flag for 'git diff-tree' accepted by both commands. With that, you should now be having some inkling of what git does, and @@ -881,7 +881,7 @@ helps you view what's going on: $ gitk --all ---------------- -will show you graphically both of your branches (that's what the `\--all` +will show you graphically both of your branches (that's what the `--all` means: normally it will just show you your current `HEAD`) and their histories. You can also see exactly how they came to be from a common source. @@ -935,7 +935,7 @@ which will very loudly warn you that you're now committing a merge (which is correct, so never mind), and you can write a small merge message about your adventures in 'git merge'-land. -After you're done, start up `gitk \--all` to see graphically what the +After you're done, start up `gitk --all` to see graphically what the history looks like. Notice that `mybranch` still exists, and you can switch to it, and continue to work with it if you want to. The `mybranch` branch will not contain the merge, but next time you merge it @@ -958,11 +958,11 @@ $ git show-branch --topo-order --more=1 master mybranch The first two lines indicate that it is showing the two branches and the first line of the commit log message from their top-of-the-tree commits, you are currently on `master` branch -(notice the asterisk `{asterisk}` character), and the first column for +(notice the asterisk `*` character), and the first column for the later output lines is used to show commits contained in the `master` branch, and the second column for the `mybranch` branch. Three commits are shown along with their log messages. -All of them have non blank characters in the first column (`{asterisk}` +All of them have non blank characters in the first column (`*` shows an ordinary commit on the current branch, `-` is a merge commit), which means they are now part of the `master` branch. Only the "Some work" commit has the plus `+` character in the second column, @@ -1013,7 +1013,7 @@ not actually do a merge. Instead, it just updated the top of the tree of your branch to that of the `master` branch. This is often called 'fast-forward' merge. -You can run `gitk \--all` again to see how the commit ancestry +You can run `gitk --all` again to see how the commit ancestry looks like, or run 'show-branch', which tells you this. ------------------------------------------------ @@ -1257,7 +1257,7 @@ this 'collapsing' tends to trivially merge most of the paths fairly quickly, leaving only a handful of real changes in non-zero stages. -To look at only non-zero stages, use `\--unmerged` flag: +To look at only non-zero stages, use `--unmerged` flag: ------------ $ git ls-files --unmerged @@ -1420,7 +1420,7 @@ packed, and stores the packed file in `.git/objects/pack` directory. [NOTE] -You will see two files, `pack-{asterisk}.pack` and `pack-{asterisk}.idx`, +You will see two files, `pack-*.pack` and `pack-*.idx`, in `.git/objects/pack` directory. They are closely related to each other, and if you ever copy them by hand to a different repository for whatever reason, you should make sure you copy diff --git a/Documentation/gitcredentials.txt b/Documentation/gitcredentials.txt index 066f825..7dfffc0 100644 --- a/Documentation/gitcredentials.txt +++ b/Documentation/gitcredentials.txt @@ -143,8 +143,8 @@ CONFIGURATION OPTIONS --------------------- Options for a credential context can be configured either in -`credential.\*` (which applies to all credentials), or -`credential.<url>.\*`, where <url> matches the context as described +`credential.*` (which applies to all credentials), or +`credential.<url>.*`, where <url> matches the context as described above. The following options are available in either location: diff --git a/Documentation/gitdiffcore.txt b/Documentation/gitdiffcore.txt index 370624c..daf1782 100644 --- a/Documentation/gitdiffcore.txt +++ b/Documentation/gitdiffcore.txt @@ -168,11 +168,11 @@ a similarity score different from the default of 50% by giving a number after the "-M" or "-C" option (e.g. "-M8" to tell it to use 8/10 = 80%). -Note. When the "-C" option is used with `\--find-copies-harder` +Note. When the "-C" option is used with `--find-copies-harder` option, 'git diff-{asterisk}' commands feed unmodified filepairs to diffcore mechanism as well as modified ones. This lets the copy detector consider unmodified files as copy source candidates at -the expense of making it slower. Without `\--find-copies-harder`, +the expense of making it slower. Without `--find-copies-harder`, 'git diff-{asterisk}' commands can detect copies only if the file that was copied happened to have been modified in the same changeset. @@ -224,7 +224,7 @@ diffcore-pickaxe: For Detecting Addition/Deletion of Specified String This transformation is used to find filepairs that represent changes that touch a specified string, and is controlled by the --S option and the `\--pickaxe-all` option to the 'git diff-{asterisk}' +-S option and the `--pickaxe-all` option to the 'git diff-*' commands. When diffcore-pickaxe is in use, it checks if there are @@ -233,9 +233,9 @@ different number of specified string. Such a filepair represents "the string appeared in this changeset". It also checks for the opposite case that loses the specified string. -When `\--pickaxe-all` is not in effect, diffcore-pickaxe leaves +When `--pickaxe-all` is not in effect, diffcore-pickaxe leaves only such filepairs that touch the specified string in its -output. When `\--pickaxe-all` is used, diffcore-pickaxe leaves all +output. When `--pickaxe-all` is used, diffcore-pickaxe leaves all filepairs intact if there is such a filepair, or makes the output empty otherwise. The latter behaviour is designed to make reviewing of the changes in the context of the whole diff --git a/Documentation/githooks.txt b/Documentation/githooks.txt index 28edefa..b9003fe 100644 --- a/Documentation/githooks.txt +++ b/Documentation/githooks.txt @@ -73,7 +73,7 @@ pre-commit ~~~~~~~~~~ This hook is invoked by 'git commit', and can be bypassed -with `\--no-verify` option. It takes no parameter, and is +with `--no-verify` option. It takes no parameter, and is invoked before obtaining the proposed commit log message and making a commit. Exiting with non-zero status from this script causes the 'git commit' to abort. @@ -99,12 +99,12 @@ given); `template` (if a `-t` option was given or the configuration option `commit.template` is set); `merge` (if the commit is a merge or a `.git/MERGE_MSG` file exists); `squash` (if a `.git/SQUASH_MSG` file exists); or `commit`, followed by -a commit SHA1 (if a `-c`, `-C` or `\--amend` option was given). +a commit SHA1 (if a `-c`, `-C` or `--amend` option was given). If the exit status is non-zero, 'git commit' will abort. The purpose of the hook is to edit the message file in place, and -it is not suppressed by the `\--no-verify` option. A non-zero exit +it is not suppressed by the `--no-verify` option. A non-zero exit means a failure of the hook and aborts the commit. It should not be used as replacement for pre-commit hook. @@ -115,7 +115,7 @@ commit-msg ~~~~~~~~~~ This hook is invoked by 'git commit', and can be bypassed -with `\--no-verify` option. It takes a single parameter, the +with `--no-verify` option. It takes a single parameter, the name of the file that holds the proposed commit log message. Exiting with non-zero status causes the 'git commit' to abort. diff --git a/Documentation/gitweb.conf.txt b/Documentation/gitweb.conf.txt index 4b8d1b1..b9dd567 100644 --- a/Documentation/gitweb.conf.txt +++ b/Documentation/gitweb.conf.txt @@ -756,14 +756,14 @@ Project specific override is not supported. forks:: If this feature is enabled, gitweb considers projects in subdirectories of project root (basename) to be forks of existing - projects. For each project `$projname.git`, projects in the - `$projname/` directory and its subdirectories will not be - shown in the main projects list. Instead, a \'+' mark is shown - next to `$projname`, which links to a "forks" view that lists all - the forks (all projects in `$projname/` subdirectory). Additionally + projects. For each project +$projname.git+, projects in the + +$projname/+ directory and its subdirectories will not be + shown in the main projects list. Instead, a \'\+' mark is shown + next to +$projname+, which links to a "forks" view that lists all + the forks (all projects in +$projname/+ subdirectory). Additionally a "forks" view for a project is linked from project summary page. + -If the project list is taken from a file (`$projects_list` points to a +If the project list is taken from a file (+$projects_list+ points to a file), forks are only recognized if they are listed after the main project in that file. + diff --git a/Documentation/gitworkflows.txt b/Documentation/gitworkflows.txt index 5e4f362..8b8c6ae 100644 --- a/Documentation/gitworkflows.txt +++ b/Documentation/gitworkflows.txt @@ -39,8 +39,8 @@ To achieve this, try to split your work into small steps from the very beginning. It is always easier to squash a few commits together than to split one big commit into several. Don't be afraid of making too small or imperfect steps along the way. You can always go back later -and edit the commits with `git rebase \--interactive` before you -publish them. You can use `git stash save \--keep-index` to run the +and edit the commits with `git rebase --interactive` before you +publish them. You can use `git stash save --keep-index` to run the test suite independent of other uncommitted changes; see the EXAMPLES section of linkgit:git-stash[1]. diff --git a/Documentation/pretty-formats.txt b/Documentation/pretty-formats.txt index 880b6f2..e3d8a83 100644 --- a/Documentation/pretty-formats.txt +++ b/Documentation/pretty-formats.txt @@ -130,8 +130,8 @@ The placeholders are: - '%b': body - '%B': raw body (unwrapped subject and body) - '%N': commit notes -- '%gD': reflog selector, e.g., `refs/stash@\{1\}` -- '%gd': shortened reflog selector, e.g., `stash@\{1\}` +- '%gD': reflog selector, e.g., `refs/stash@{1}` +- '%gd': shortened reflog selector, e.g., `stash@{1}` - '%gn': reflog identity name - '%gN': reflog identity name (respecting .mailmap, see linkgit:git-shortlog[1] or linkgit:git-blame[1]) - '%ge': reflog identity email @@ -155,7 +155,7 @@ insert an empty string unless we are traversing reflog entries (e.g., by `git log -g`). The `%d` placeholder will use the "short" decoration format if `--decorate` was not already provided on the command line. -If you add a `{plus}` (plus sign) after '%' of a placeholder, a line-feed +If you add a `+` (plus sign) after '%' of a placeholder, a line-feed is inserted immediately before the expansion if and only if the placeholder expands to a non-empty string. diff --git a/Documentation/pull-fetch-param.txt b/Documentation/pull-fetch-param.txt index 5dd6e5a..94a9d32 100644 --- a/Documentation/pull-fetch-param.txt +++ b/Documentation/pull-fetch-param.txt @@ -13,7 +13,7 @@ endif::git-pull[] <refspec>:: The format of a <refspec> parameter is an optional plus - `{plus}`, followed by the source ref <src>, followed + `+`, followed by the source ref <src>, followed by a colon `:`, followed by the destination ref <dst>. + The remote ref that matches <src> diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt index 6a4b635..1ae3c89 100644 --- a/Documentation/rev-list-options.txt +++ b/Documentation/rev-list-options.txt @@ -198,7 +198,7 @@ excluded from the output. + For example, `--cherry-pick --right-only A...B` omits those commits from `B` which are in `A` or are patch-equivalent to a commit in -`A`. In other words, this lists the `{plus}` commits from `git cherry A B`. +`A`. In other words, this lists the `+` commits from `git cherry A B`. More precisely, `--cherry-pick --right-only --no-merges` gives the exact list. @@ -455,7 +455,7 @@ The effect of this is best shown by way of comparing to `---------' ----------------------------------------------------------------------- + -Note the major differences in `N` and `P` over '\--full-history': +Note the major differences in `N` and `P` over '--full-history': + -- * `N`'s parent list had `I` removed, because it is an ancestor of the @@ -494,7 +494,7 @@ of course). When we want to find out what commits in `M` are contaminated with the bug introduced by `D` and need fixing, however, we might want to view only the subset of 'D..M' that are actually descendants of `D`, i.e. -excluding `C` and `K`. This is exactly what the '\--ancestry-path' +excluding `C` and `K`. This is exactly what the '--ancestry-path' option does. Applied to the 'D..M' range, it results in: + ----------------------------------------------------------------------- diff --git a/Documentation/technical/api-parse-options.txt b/Documentation/technical/api-parse-options.txt index 2527b7e..3062389 100644 --- a/Documentation/technical/api-parse-options.txt +++ b/Documentation/technical/api-parse-options.txt @@ -21,7 +21,7 @@ that allow to change the behavior of a command. * There are basically two forms of options: 'Short options' consist of one dash (`-`) and one alphanumeric character. - 'Long options' begin with two dashes (`\--`) and some + 'Long options' begin with two dashes (`--`) and some alphanumeric characters. * Options are case-sensitive. @@ -31,7 +31,7 @@ The parse-options API allows: * 'sticked' and 'separate form' of options with arguments. `-oArg` is sticked, `-o Arg` is separate form. - `\--option=Arg` is sticked, `\--option Arg` is separate form. + `--option=Arg` is sticked, `--option Arg` is separate form. * Long options may be 'abbreviated', as long as the abbreviation is unambiguous. @@ -39,12 +39,12 @@ The parse-options API allows: * Short options may be bundled, e.g. `-a -b` can be specified as `-ab`. * Boolean long options can be 'negated' (or 'unset') by prepending - `no-`, e.g. `\--no-abbrev` instead of `\--abbrev`. Conversely, + `no-`, e.g. `--no-abbrev` instead of `--abbrev`. Conversely, options that begin with `no-` can be 'negated' by removing it. -* Options and non-option arguments can clearly be separated using the `\--` - option, e.g. `-a -b \--option \-- \--this-is-a-file` indicates that - `\--this-is-a-file` must not be processed as an option. +* Options and non-option arguments can clearly be separated using the `--` + option, e.g. `-a -b --option -- --this-is-a-file` indicates that + `--this-is-a-file` must not be processed as an option. Steps to parse options ---------------------- @@ -76,7 +76,7 @@ before the full parser, which in turn shows the full help message. Flags are the bitwise-or of: `PARSE_OPT_KEEP_DASHDASH`:: - Keep the `\--` that usually separates options from + Keep the `--` that usually separates options from non-option arguments. `PARSE_OPT_STOP_AT_NON_OPTION`:: @@ -114,22 +114,22 @@ say `static struct option builtin_add_options[]`. There are some macros to easily define options: `OPT__ABBREV(&int_var)`:: - Add `\--abbrev[=<n>]`. + Add `--abbrev[=<n>]`. `OPT__COLOR(&int_var, description)`:: - Add `\--color[=<when>]` and `--no-color`. + Add `--color[=<when>]` and `--no-color`. `OPT__DRY_RUN(&int_var, description)`:: - Add `-n, \--dry-run`. + Add `-n, --dry-run`. `OPT__FORCE(&int_var, description)`:: - Add `-f, \--force`. + Add `-f, --force`. `OPT__QUIET(&int_var, description)`:: - Add `-q, \--quiet`. + Add `-q, --quiet`. `OPT__VERBOSE(&int_var, description)`:: - Add `-v, \--verbose`. + Add `-v, --verbose`. `OPT_GROUP(description)`:: Start an option group. `description` is a short string that @@ -216,10 +216,10 @@ The last element of the array must be `OPT_END()`. If not stated otherwise, interpret the arguments as follows: * `short` is a character for the short option - (e.g. `{apostrophe}e{apostrophe}` for `-e`, use `0` to omit), + (e.g. `'e'` for `-e`, use `0` to omit), * `long` is a string for the long option - (e.g. `"example"` for `\--example`, use `NULL` to omit), + (e.g. `"example"` for `--example`, use `NULL` to omit), * `int_var` is an integer variable, @@ -243,10 +243,10 @@ The function must be defined in this form: The callback mechanism is as follows: * Inside `func`, the only interesting member of the structure - given by `opt` is the void pointer `opt\->value`. - `\*opt\->value` will be the value that is saved into `var`, if you + given by `opt` is the void pointer `opt->value`. + `*opt->value` will be the value that is saved into `var`, if you use `OPT_CALLBACK()`. - For example, do `*(unsigned long *)opt\->value = 42;` to get 42 + For example, do `*(unsigned long *)opt->value = 42;` to get 42 into an `unsigned long` variable. * Return value `0` indicates success and non-zero return diff --git a/Documentation/technical/index-format.txt b/Documentation/technical/index-format.txt index 8930b3f..9d25b30 100644 --- a/Documentation/technical/index-format.txt +++ b/Documentation/technical/index-format.txt @@ -113,9 +113,22 @@ GIT index format are encoded in 7-bit ASCII and the encoding cannot contain a NUL byte (iow, this is a UNIX pathname). + (Version 4) In version 4, the entry path name is prefix-compressed + relative to the path name for the previous entry (the very first + entry is encoded as if the path name for the previous entry is an + empty string). At the beginning of an entry, an integer N in the + variable width encoding (the same encoding as the offset is encoded + for OFS_DELTA pack entries; see pack-format.txt) is stored, followed + by a NUL-terminated string S. Removing N bytes from the end of the + path name for the previous entry, and replacing it with the string S + yields the path name for this entry. + 1-8 nul bytes as necessary to pad the entry to a multiple of eight bytes while keeping the name NUL-terminated. + (Version 4) In version 4, the padding after the pathname does not + exist. + == Extensions === Cached tree diff --git a/Documentation/technical/protocol-common.txt b/Documentation/technical/protocol-common.txt index d30a1b9..fb7ff08 100644 --- a/Documentation/technical/protocol-common.txt +++ b/Documentation/technical/protocol-common.txt @@ -36,7 +36,7 @@ More specifically, they: . They cannot have ASCII control characters (i.e. bytes whose values are lower than \040, or \177 `DEL`), space, tilde `~`, - caret `{caret}`, colon `:`, question-mark `?`, asterisk `*`, + caret `^`, colon `:`, question-mark `?`, asterisk `*`, or open bracket `[` anywhere. . They cannot end with a slash `/` nor a dot `.`. diff --git a/Documentation/user-manual.txt b/Documentation/user-manual.txt index 6c7fee7..1b94207 100644 --- a/Documentation/user-manual.txt +++ b/Documentation/user-manual.txt @@ -1611,7 +1611,7 @@ Recovering lost changes Reflogs ^^^^^^^ -Say you modify a branch with `linkgit:git-reset[1] --hard`, and then +Say you modify a branch with +linkgit:git-reset[1] \--hard+, and then realize that the branch was the only reference you had to that point in history. @@ -4207,7 +4207,7 @@ commits one by one with the function `get_revision()`. If you are interested in more details of the revision walking process, just have a look at the first implementation of `cmd_log()`; call -`git show v1.3.0{tilde}155^2{tilde}4` and scroll down to that function (note that you +`git show v1.3.0~155^2~4` and scroll down to that function (note that you no longer need to call `setup_pager()` directly). Nowadays, `git log` is a builtin, which means that it is _contained_ in the @@ -4270,9 +4270,9 @@ Two things are interesting here: negative numbers in case of different errors--and 0 on success. - the variable `sha1` in the function signature of `get_sha1()` is `unsigned - char {asterisk}`, but is actually expected to be a pointer to `unsigned + char *`, but is actually expected to be a pointer to `unsigned char[20]`. This variable will contain the 160-bit SHA-1 of the given - commit. Note that whenever a SHA-1 is passed as `unsigned char {asterisk}`, it + commit. Note that whenever a SHA-1 is passed as `unsigned char *`, it is the binary representation, as opposed to the ASCII representation in hex characters, which is passed as `char *`. diff --git a/GIT-VERSION-GEN b/GIT-VERSION-GEN index b982e33..c92dbed 100755 --- a/GIT-VERSION-GEN +++ b/GIT-VERSION-GEN @@ -12,7 +12,7 @@ if test -f version then VN=$(cat version) || VN="$DEF_VER" elif test -d .git -o -f .git && - VN=$(git describe --match "v[0-9]*" --abbrev=4 HEAD 2>/dev/null) && + VN=$(git describe --match "v[0-9]*" --abbrev=7 HEAD 2>/dev/null) && case "$VN" in *$LF*) (exit 1) ;; v[0-9]*) @@ -386,6 +386,7 @@ XDIFF_OBJS = VCSSVN_H = VCSSVN_OBJS = VCSSVN_TEST_OBJS = +MISC_H = EXTRA_CPPFLAGS = LIB_H = LIB_OBJS = @@ -546,6 +547,36 @@ LIB_FILE=libgit.a XDIFF_LIB=xdiff/lib.a VCSSVN_LIB=vcs-svn/lib.a +XDIFF_H += xdiff/xinclude.h +XDIFF_H += xdiff/xmacros.h +XDIFF_H += xdiff/xdiff.h +XDIFF_H += xdiff/xtypes.h +XDIFF_H += xdiff/xutils.h +XDIFF_H += xdiff/xprepare.h +XDIFF_H += xdiff/xdiffi.h +XDIFF_H += xdiff/xemit.h + +VCSSVN_H += vcs-svn/line_buffer.h +VCSSVN_H += vcs-svn/sliding_window.h +VCSSVN_H += vcs-svn/repo_tree.h +VCSSVN_H += vcs-svn/fast_export.h +VCSSVN_H += vcs-svn/svndiff.h +VCSSVN_H += vcs-svn/svndump.h + +MISC_H += branch.h +MISC_H += bundle.h +MISC_H += bisect.h +MISC_H += common-cmds.h +MISC_H += fetch-pack.h +MISC_H += thread-utils.h +MISC_H += send-pack.h +MISC_H += shortlog.h +MISC_H += reachable.h +MISC_H += wt-status.h +MISC_H += tar.h +MISC_H += url.h +MISC_H += walker.h + LIB_H += advice.h LIB_H += archive.h LIB_H += argv-array.h @@ -631,6 +662,7 @@ LIB_H += tree-walk.h LIB_H += unpack-trees.h LIB_H += userdiff.h LIB_H += utf8.h +LIB_H += varint.h LIB_H += xdiff-interface.h LIB_H += xdiff/xdiff.h @@ -757,6 +789,7 @@ LIB_OBJS += url.o LIB_OBJS += usage.o LIB_OBJS += userdiff.o LIB_OBJS += utf8.o +LIB_OBJS += varint.o LIB_OBJS += walker.o LIB_OBJS += wrapper.o LIB_OBJS += write_or_die.o @@ -2182,24 +2215,8 @@ connect.o transport.o url.o http-backend.o: url.h http-fetch.o http-walker.o remote-curl.o transport.o walker.o: walker.h http.o http-walker.o http-push.o http-fetch.o remote-curl.o: http.h url.h -XDIFF_H += xdiff/xinclude.h -XDIFF_H += xdiff/xmacros.h -XDIFF_H += xdiff/xdiff.h -XDIFF_H += xdiff/xtypes.h -XDIFF_H += xdiff/xutils.h -XDIFF_H += xdiff/xprepare.h -XDIFF_H += xdiff/xdiffi.h -XDIFF_H += xdiff/xemit.h - xdiff-interface.o $(XDIFF_OBJS): $(XDIFF_H) -VCSSVN_H += vcs-svn/line_buffer.h -VCSSVN_H += vcs-svn/sliding_window.h -VCSSVN_H += vcs-svn/repo_tree.h -VCSSVN_H += vcs-svn/fast_export.h -VCSSVN_H += vcs-svn/svndiff.h -VCSSVN_H += vcs-svn/svndump.h - $(VCSSVN_OBJS) $(VCSSVN_TEST_OBJS): $(LIB_H) $(VCSSVN_H) endif @@ -2296,7 +2313,7 @@ XGETTEXT_FLAGS_C = $(XGETTEXT_FLAGS) --language=C \ --keyword=_ --keyword=N_ --keyword="Q_:1,2" XGETTEXT_FLAGS_SH = $(XGETTEXT_FLAGS) --language=Shell XGETTEXT_FLAGS_PERL = $(XGETTEXT_FLAGS) --keyword=__ --language=Perl -LOCALIZED_C := $(C_OBJ:o=c) +LOCALIZED_C := $(C_OBJ:o=c) $(LIB_H) $(XDIFF_H) $(VCSSVN_H) $(MISC_H) LOCALIZED_SH := $(SCRIPT_SH) LOCALIZED_PERL := $(SCRIPT_PERL) diff --git a/builtin/apply.c b/builtin/apply.c index 799bb5e..725712d 100644 --- a/builtin/apply.c +++ b/builtin/apply.c @@ -103,7 +103,7 @@ static void parse_whitespace_option(const char *option) ws_error_action = correct_ws_error; return; } - die("unrecognized whitespace option '%s'", option); + die(_("unrecognized whitespace option '%s'"), option); } static void parse_ignorewhitespace_option(const char *option) @@ -118,7 +118,7 @@ static void parse_ignorewhitespace_option(const char *option) ws_ignore_action = ignore_ws_change; return; } - die("unrecognized whitespace ignore option '%s'", option); + die(_("unrecognized whitespace ignore option '%s'"), option); } static void set_default_whitespace_mode(const char *whitespace_option) @@ -375,22 +375,25 @@ static void clear_image(struct image *image) image->len = 0; } -static void say_patch_name(FILE *output, const char *pre, - struct patch *patch, const char *post) +/* fmt must contain _one_ %s and no other substitution */ +static void say_patch_name(FILE *output, const char *fmt, struct patch *patch) { - fputs(pre, output); + struct strbuf sb = STRBUF_INIT; + if (patch->old_name && patch->new_name && strcmp(patch->old_name, patch->new_name)) { - quote_c_style(patch->old_name, NULL, output, 0); - fputs(" => ", output); - quote_c_style(patch->new_name, NULL, output, 0); + quote_c_style(patch->old_name, &sb, NULL, 0); + strbuf_addstr(&sb, " => "); + quote_c_style(patch->new_name, &sb, NULL, 0); } else { const char *n = patch->new_name; if (!n) n = patch->old_name; - quote_c_style(n, NULL, output, 0); + quote_c_style(n, &sb, NULL, 0); } - fputs(post, output); + fprintf(output, fmt, sb.buf); + fputc('\n', output); + strbuf_release(&sb); } #define SLOP (16) @@ -809,7 +812,7 @@ static int has_epoch_timestamp(const char *nameline) if (!stamp) { stamp = xmalloc(sizeof(*stamp)); if (regcomp(stamp, stamp_regexp, REG_EXTENDED)) { - warning("Cannot prepare timestamp regexp %s", + warning(_("Cannot prepare timestamp regexp %s"), stamp_regexp); return 0; } @@ -818,7 +821,7 @@ static int has_epoch_timestamp(const char *nameline) status = regexec(stamp, timestamp, ARRAY_SIZE(m), m, 0); if (status) { if (status != REG_NOMATCH) - warning("regexec returned %d for input: %s", + warning(_("regexec returned %d for input: %s"), status, timestamp); return 0; } @@ -899,7 +902,7 @@ static void parse_traditional_patch(const char *first, const char *second, struc } } if (!name) - die("unable to find filename in patch at line %d", linenr); + die(_("unable to find filename in patch at line %d"), linenr); } static int gitdiff_hdrend(const char *line, struct patch *patch) @@ -928,17 +931,17 @@ static char *gitdiff_verify_name(const char *line, int isnull, char *orig_name, name = orig_name; len = strlen(name); if (isnull) - die("git apply: bad git-diff - expected /dev/null, got %s on line %d", name, linenr); + die(_("git apply: bad git-diff - expected /dev/null, got %s on line %d"), name, linenr); another = find_name(line, NULL, p_value, TERM_TAB); if (!another || memcmp(another, name, len + 1)) - die("git apply: bad git-diff - inconsistent %s filename on line %d", oldnew, linenr); + die(_("git apply: bad git-diff - inconsistent %s filename on line %d"), oldnew, linenr); free(another); return orig_name; } else { /* expect "/dev/null" */ if (memcmp("/dev/null", line, 9) || line[9] != '\n') - die("git apply: bad git-diff - expected /dev/null on line %d", linenr); + die(_("git apply: bad git-diff - expected /dev/null on line %d"), linenr); return NULL; } } @@ -1381,7 +1384,7 @@ static void recount_diff(const char *line, int size, struct fragment *fragment) break; } if (ret) { - warning("recount: unexpected line: %.*s", + warning(_("recount: unexpected line: %.*s"), (int)linelen(line, size), line); return; } @@ -1438,7 +1441,7 @@ static int find_header(const char *line, unsigned long size, int *hdrsize, struc struct fragment dummy; if (parse_fragment_header(line, len, &dummy) < 0) continue; - die("patch fragment without header at line %d: %.*s", + die(_("patch fragment without header at line %d: %.*s"), linenr, (int)len-1, line); } @@ -1455,8 +1458,12 @@ static int find_header(const char *line, unsigned long size, int *hdrsize, struc continue; if (!patch->old_name && !patch->new_name) { if (!patch->def_name) - die("git diff header lacks filename information when removing " - "%d leading pathname components (line %d)" , p_value, linenr); + die(Q_("git diff header lacks filename information when removing " + "%d leading pathname component (line %d)", + "git diff header lacks filename information when removing " + "%d leading pathname components (line %d)", + p_value), + p_value, linenr); patch->old_name = xstrdup(patch->def_name); patch->new_name = xstrdup(patch->def_name); } @@ -1611,9 +1618,9 @@ static int parse_fragment(const char *line, unsigned long size, patch->lines_deleted += deleted; if (0 < patch->is_new && oldlines) - return error("new file depends on old contents"); + return error(_("new file depends on old contents")); if (0 < patch->is_delete && newlines) - return error("deleted file still has contents"); + return error(_("deleted file still has contents")); return offset; } @@ -1639,7 +1646,7 @@ static int parse_single_patch(const char *line, unsigned long size, struct patch fragment->linenr = linenr; len = parse_fragment(line, size, patch, fragment); if (len <= 0) - die("corrupt patch at line %d", linenr); + die(_("corrupt patch at line %d"), linenr); fragment->patch = line; fragment->size = len; oldlines += fragment->oldlines; @@ -1675,12 +1682,14 @@ static int parse_single_patch(const char *line, unsigned long size, struct patch patch->is_delete = 0; if (0 < patch->is_new && oldlines) - die("new file %s depends on old contents", patch->new_name); + die(_("new file %s depends on old contents"), patch->new_name); if (0 < patch->is_delete && newlines) - die("deleted file %s still has contents", patch->old_name); + die(_("deleted file %s still has contents"), patch->old_name); if (!patch->is_delete && !newlines && context) - fprintf(stderr, "** warning: file %s becomes empty but " - "is not deleted\n", patch->new_name); + fprintf_ln(stderr, + _("** warning: " + "file %s becomes empty but is not deleted"), + patch->new_name); return offset; } @@ -1824,7 +1833,7 @@ static struct fragment *parse_binary_hunk(char **buf_p, corrupt: free(data); *status_p = -1; - error("corrupt binary patch at line %d: %.*s", + error(_("corrupt binary patch at line %d: %.*s"), linenr-1, llen-1, buffer); return NULL; } @@ -1853,7 +1862,7 @@ static int parse_binary(char *buffer, unsigned long size, struct patch *patch) forward = parse_binary_hunk(&buffer, &size, &status, &used); if (!forward && !status) /* there has to be one hunk (forward hunk) */ - return error("unrecognized binary patch at line %d", linenr-1); + return error(_("unrecognized binary patch at line %d"), linenr-1); if (status) /* otherwise we already gave an error message */ return status; @@ -1939,7 +1948,7 @@ static int parse_chunk(char *buffer, unsigned long size, struct patch *patch) */ if ((apply || check) && (!patch->is_binary && !metadata_changes(patch))) - die("patch with only garbage at line %d", linenr); + die(_("patch with only garbage at line %d"), linenr); } return offset + hdrsize + patchsize; @@ -2029,11 +2038,11 @@ static int read_old_data(struct stat *st, const char *path, struct strbuf *buf) switch (st->st_mode & S_IFMT) { case S_IFLNK: if (strbuf_readlink(buf, path, st->st_size) < 0) - return error("unable to read symlink %s", path); + return error(_("unable to read symlink %s"), path); return 0; case S_IFREG: if (strbuf_read_file(buf, path, st->st_size) != st->st_size) - return error("unable to open or read %s", path); + return error(_("unable to open or read %s"), path); convert_to_git(path, buf->buf, buf->len, buf, 0); return 0; default: @@ -2104,7 +2113,7 @@ static void update_pre_post_images(struct image *preimage, ctx++; } if (preimage->nr <= ctx) - die("oops"); + die(_("oops")); /* and copy it in, while fixing the line length */ len = preimage->line[ctx].len; @@ -2626,7 +2635,7 @@ static int apply_one_fragment(struct image *img, struct fragment *frag, break; default: if (apply_verbosely) - error("invalid start of line: '%c'", first); + error(_("invalid start of line: '%c'"), first); return -1; } if (added_blank_line) { @@ -2743,9 +2752,11 @@ static int apply_one_fragment(struct image *img, struct fragment *frag, int offset = applied_pos - pos; if (apply_in_reverse) offset = 0 - offset; - fprintf(stderr, - "Hunk #%d succeeded at %d (offset %d lines).\n", - nth_fragment, applied_pos + 1, offset); + fprintf_ln(stderr, + Q_("Hunk #%d succeeded at %d (offset %d line).", + "Hunk #%d succeeded at %d (offset %d lines).", + offset), + nth_fragment, applied_pos + 1, offset); } /* @@ -2754,13 +2765,13 @@ static int apply_one_fragment(struct image *img, struct fragment *frag, */ if ((leading != frag->leading) || (trailing != frag->trailing)) - fprintf(stderr, "Context reduced to (%ld/%ld)" - " to apply fragment at %d\n", - leading, trailing, applied_pos+1); + fprintf_ln(stderr, _("Context reduced to (%ld/%ld)" + " to apply fragment at %d"), + leading, trailing, applied_pos+1); update_image(img, applied_pos, &preimage, &postimage); } else { if (apply_verbosely) - error("while searching for:\n%.*s", + error(_("while searching for:\n%.*s"), (int)(old - oldlines), oldlines); } @@ -2779,7 +2790,7 @@ static int apply_binary_fragment(struct image *img, struct patch *patch) void *dst; if (!fragment) - return error("missing binary patch data for '%s'", + return error(_("missing binary patch data for '%s'"), patch->new_name ? patch->new_name : patch->old_name); @@ -2882,13 +2893,13 @@ static int apply_binary(struct image *img, struct patch *patch) * in the patch->fragments->{patch,size}. */ if (apply_binary_fragment(img, patch)) - return error("binary patch does not apply to '%s'", + return error(_("binary patch does not apply to '%s'"), name); /* verify that the result matches */ hash_sha1_file(img->buf, img->len, blob_type, sha1); if (strcmp(sha1_to_hex(sha1), patch->new_sha1_prefix)) - return error("binary patch to '%s' creates incorrect result (expecting %s, got %s)", + return error(_("binary patch to '%s' creates incorrect result (expecting %s, got %s)"), name, patch->new_sha1_prefix, sha1_to_hex(sha1)); } @@ -2909,7 +2920,7 @@ static int apply_fragments(struct image *img, struct patch *patch) while (frag) { nth++; if (apply_one_fragment(img, frag, inaccurate_eof, ws_rule, nth)) { - error("patch failed: %s:%ld", name, frag->oldpos); + error(_("patch failed: %s:%ld"), name, frag->oldpos); if (!apply_with_reject) return -1; frag->rejected = 1; @@ -3024,14 +3035,14 @@ static int apply_data(struct patch *patch, struct stat *st, struct cache_entry * if (!(patch->is_copy || patch->is_rename) && (tpatch = in_fn_table(patch->old_name)) != NULL && !to_be_deleted(tpatch)) { if (was_deleted(tpatch)) { - return error("patch %s has been renamed/deleted", + return error(_("patch %s has been renamed/deleted"), patch->old_name); } /* We have a patched copy in memory; use that. */ strbuf_add(&buf, tpatch->result, tpatch->resultsize); } else if (cached) { if (read_file_or_gitlink(ce, &buf)) - return error("read of %s failed", patch->old_name); + return error(_("read of %s failed"), patch->old_name); } else if (patch->old_name) { if (S_ISGITLINK(patch->old_mode)) { if (ce) { @@ -3048,7 +3059,7 @@ static int apply_data(struct patch *patch, struct stat *st, struct cache_entry * } } else { if (read_old_data(st, patch->old_name, &buf)) - return error("read of %s failed", patch->old_name); + return error(_("read of %s failed"), patch->old_name); } } @@ -3063,7 +3074,7 @@ static int apply_data(struct patch *patch, struct stat *st, struct cache_entry * free(image.line_allocated); if (0 < patch->is_delete && patch->resultsize) - return error("removal patch leaves file contents"); + return error(_("removal patch leaves file contents")); return 0; } @@ -3084,7 +3095,7 @@ static int check_to_create_blob(const char *new_name, int ok_if_exists) if (has_symlink_leading_path(new_name, strlen(new_name))) return 0; - return error("%s: already exists in working directory", new_name); + return error(_("%s: already exists in working directory"), new_name); } else if ((errno != ENOENT) && (errno != ENOTDIR)) return error("%s: %s", new_name, strerror(errno)); @@ -3122,12 +3133,12 @@ static int check_preimage(struct patch *patch, struct cache_entry **ce, struct s if (!(patch->is_copy || patch->is_rename) && (tpatch = in_fn_table(old_name)) != NULL && !to_be_deleted(tpatch)) { if (was_deleted(tpatch)) - return error("%s: has been deleted/renamed", old_name); + return error(_("%s: has been deleted/renamed"), old_name); st_mode = tpatch->new_mode; } else if (!cached) { stat_ret = lstat(old_name, st); if (stat_ret && errno != ENOENT) - return error("%s: %s", old_name, strerror(errno)); + return error(_("%s: %s"), old_name, strerror(errno)); } if (to_be_deleted(tpatch)) @@ -3138,7 +3149,7 @@ static int check_preimage(struct patch *patch, struct cache_entry **ce, struct s if (pos < 0) { if (patch->is_new < 0) goto is_new; - return error("%s: does not exist in index", old_name); + return error(_("%s: does not exist in index"), old_name); } *ce = active_cache[pos]; if (stat_ret < 0) { @@ -3152,13 +3163,13 @@ static int check_preimage(struct patch *patch, struct cache_entry **ce, struct s return -1; } if (!cached && verify_index_match(*ce, st)) - return error("%s: does not match index", old_name); + return error(_("%s: does not match index"), old_name); if (cached) st_mode = (*ce)->ce_mode; } else if (stat_ret < 0) { if (patch->is_new < 0) goto is_new; - return error("%s: %s", old_name, strerror(errno)); + return error(_("%s: %s"), old_name, strerror(errno)); } if (!cached && !tpatch) @@ -3169,9 +3180,9 @@ static int check_preimage(struct patch *patch, struct cache_entry **ce, struct s if (!patch->old_mode) patch->old_mode = st_mode; if ((st_mode ^ patch->old_mode) & S_IFMT) - return error("%s: wrong type", old_name); + return error(_("%s: wrong type"), old_name); if (st_mode != patch->old_mode) - warning("%s has type %o, expected %o", + warning(_("%s has type %o, expected %o"), old_name, st_mode, patch->old_mode); if (!patch->new_mode && !patch->is_delete) patch->new_mode = st_mode; @@ -3226,7 +3237,7 @@ static int check_patch(struct patch *patch) if (check_index && cache_name_pos(new_name, strlen(new_name)) >= 0 && !ok_if_exists) - return error("%s: already exists in index", new_name); + return error(_("%s: already exists in index"), new_name); if (!cached) { int err = check_to_create_blob(new_name, ok_if_exists); if (err) @@ -3245,13 +3256,13 @@ static int check_patch(struct patch *patch) if (!patch->new_mode) patch->new_mode = patch->old_mode; if ((patch->old_mode ^ patch->new_mode) & S_IFMT) - return error("new mode (%o) of %s does not match old mode (%o)%s%s", + return error(_("new mode (%o) of %s does not match old mode (%o)%s%s"), patch->new_mode, new_name, patch->old_mode, same ? "" : " of ", same ? "" : old_name); } if (apply_data(patch, &st, ce) < 0) - return error("%s: patch does not apply", name); + return error(_("%s: patch does not apply"), name); patch->rejected = 0; return 0; } @@ -3264,7 +3275,7 @@ static int check_patch_list(struct patch *patch) while (patch) { if (apply_verbosely) say_patch_name(stderr, - "Checking patch ", patch, "...\n"); + _("Checking patch %s..."), patch); err |= check_patch(patch); patch = patch->next; } @@ -3319,7 +3330,7 @@ static void build_fake_ancestor(struct patch *list, const char *filename) ce = make_cache_entry(patch->old_mode, sha1_ptr, name, 0, 0); if (!ce) - die("make_cache_entry failed for path '%s'", name); + die(_("make_cache_entry failed for path '%s'"), name); if (add_index_entry(&result, ce, ADD_CACHE_OK_TO_ADD)) die ("Could not add %s to temporary index", name); } @@ -3462,7 +3473,7 @@ static void remove_file(struct patch *patch, int rmdir_empty) { if (update_index) { if (remove_file_from_cache(patch->old_name) < 0) - die("unable to remove %s from index", patch->old_name); + die(_("unable to remove %s from index"), patch->old_name); } if (!cached) { if (!remove_or_warn(patch->old_mode, patch->old_name) && rmdir_empty) { @@ -3489,19 +3500,19 @@ static void add_index_file(const char *path, unsigned mode, void *buf, unsigned const char *s = buf; if (get_sha1_hex(s + strlen("Subproject commit "), ce->sha1)) - die("corrupt patch for subproject %s", path); + die(_("corrupt patch for subproject %s"), path); } else { if (!cached) { if (lstat(path, &st) < 0) - die_errno("unable to stat newly created file '%s'", + die_errno(_("unable to stat newly created file '%s'"), path); fill_stat_cache_info(ce, &st); } if (write_sha1_file(buf, size, blob_type, ce->sha1) < 0) - die("unable to create backing store for newly created file %s", path); + die(_("unable to create backing store for newly created file %s"), path); } if (add_cache_entry(ce, ADD_CACHE_OK_TO_ADD) < 0) - die("unable to add cache entry for %s", path); + die(_("unable to add cache entry for %s"), path); } static int try_create_file(const char *path, unsigned int mode, const char *buf, unsigned long size) @@ -3534,7 +3545,7 @@ static int try_create_file(const char *path, unsigned int mode, const char *buf, strbuf_release(&nbuf); if (close(fd) < 0) - die_errno("closing file '%s'", path); + die_errno(_("closing file '%s'"), path); return 0; } @@ -3583,7 +3594,7 @@ static void create_one_file(char *path, unsigned mode, const char *buf, unsigned ++nr; } } - die_errno("unable to write file '%s' mode %o", path, mode); + die_errno(_("unable to write file '%s' mode %o"), path, mode); } static void create_file(struct patch *patch) @@ -3628,6 +3639,7 @@ static int write_out_one_reject(struct patch *patch) char namebuf[PATH_MAX]; struct fragment *frag; int cnt = 0; + struct strbuf sb = STRBUF_INIT; for (cnt = 0, frag = patch->fragments; frag; frag = frag->next) { if (!frag->rejected) @@ -3638,7 +3650,7 @@ static int write_out_one_reject(struct patch *patch) if (!cnt) { if (apply_verbosely) say_patch_name(stderr, - "Applied patch ", patch, " cleanly.\n"); + _("Applied patch %s cleanly."), patch); return 0; } @@ -3646,16 +3658,20 @@ static int write_out_one_reject(struct patch *patch) * contents are marked "rejected" at the patch level. */ if (!patch->new_name) - die("internal error"); + die(_("internal error")); /* Say this even without --verbose */ - say_patch_name(stderr, "Applying patch ", patch, " with"); - fprintf(stderr, " %d rejects...\n", cnt); + strbuf_addf(&sb, Q_("Applying patch %%s with %d reject...", + "Applying patch %%s with %d rejects...", + cnt), + cnt); + say_patch_name(stderr, sb.buf, patch); + strbuf_release(&sb); cnt = strlen(patch->new_name); if (ARRAY_SIZE(namebuf) <= cnt + 5) { cnt = ARRAY_SIZE(namebuf) - 5; - warning("truncating .rej filename to %.*s.rej", + warning(_("truncating .rej filename to %.*s.rej"), cnt - 1, patch->new_name); } memcpy(namebuf, patch->new_name, cnt); @@ -3663,7 +3679,7 @@ static int write_out_one_reject(struct patch *patch) rej = fopen(namebuf, "w"); if (!rej) - return error("cannot open %s: %s", namebuf, strerror(errno)); + return error(_("cannot open %s: %s"), namebuf, strerror(errno)); /* Normal git tools never deal with .rej, so do not pretend * this is a git patch by saying --git nor give extended @@ -3676,10 +3692,10 @@ static int write_out_one_reject(struct patch *patch) frag; cnt++, frag = frag->next) { if (!frag->rejected) { - fprintf(stderr, "Hunk #%d applied cleanly.\n", cnt); + fprintf_ln(stderr, _("Hunk #%d applied cleanly."), cnt); continue; } - fprintf(stderr, "Rejected hunk #%d.\n", cnt); + fprintf_ln(stderr, _("Rejected hunk #%d."), cnt); fprintf(rej, "%.*s", frag->size, frag->patch); if (frag->patch[frag->size-1] != '\n') fputc('\n', rej); @@ -3810,7 +3826,7 @@ static int apply_patch(int fd, const char *filename, int options) } if (!list && !skipped_patch) - die("unrecognized input"); + die(_("unrecognized input")); if (whitespace_error && (ws_error_action == die_on_ws_error)) apply = 0; @@ -3821,7 +3837,7 @@ static int apply_patch(int fd, const char *filename, int options) if (check_index) { if (read_cache() < 0) - die("unable to read index file"); + die(_("unable to read index file")); } if ((check || apply) && @@ -4016,10 +4032,10 @@ int cmd_apply(int argc, const char **argv, const char *prefix_) if (!force_apply && (diffstat || numstat || summary || check || fake_ancestor)) apply = 0; if (check_index && is_not_gitdir) - die("--index outside a repository"); + die(_("--index outside a repository")); if (cached) { if (is_not_gitdir) - die("--cached outside a repository"); + die(_("--cached outside a repository")); check_index = 1; } for (i = 0; i < argc; i++) { @@ -4035,7 +4051,7 @@ int cmd_apply(int argc, const char **argv, const char *prefix_) fd = open(arg, O_RDONLY); if (fd < 0) - die_errno("can't open patch '%s'", arg); + die_errno(_("can't open patch '%s'"), arg); read_stdin = 0; set_default_whitespace_mode(whitespace_option); errs |= apply_patch(fd, arg, options); @@ -4049,32 +4065,32 @@ int cmd_apply(int argc, const char **argv, const char *prefix_) squelch_whitespace_errors < whitespace_error) { int squelched = whitespace_error - squelch_whitespace_errors; - warning("squelched %d " - "whitespace error%s", - squelched, - squelched == 1 ? "" : "s"); + warning(Q_("squelched %d whitespace error", + "squelched %d whitespace errors", + squelched), + squelched); } if (ws_error_action == die_on_ws_error) - die("%d line%s add%s whitespace errors.", - whitespace_error, - whitespace_error == 1 ? "" : "s", - whitespace_error == 1 ? "s" : ""); + die(Q_("%d line adds whitespace errors.", + "%d lines add whitespace errors.", + whitespace_error), + whitespace_error); if (applied_after_fixing_ws && apply) warning("%d line%s applied after" " fixing whitespace errors.", applied_after_fixing_ws, applied_after_fixing_ws == 1 ? "" : "s"); else if (whitespace_error) - warning("%d line%s add%s whitespace errors.", - whitespace_error, - whitespace_error == 1 ? "" : "s", - whitespace_error == 1 ? "s" : ""); + warning(Q_("%d line adds whitespace errors.", + "%d lines add whitespace errors.", + whitespace_error), + whitespace_error); } if (update_index) { if (write_cache(newfd, active_cache, active_nr) || commit_locked_index(&lock_file)) - die("Unable to write new index file"); + die(_("Unable to write new index file")); } return !!errs; diff --git a/builtin/branch.c b/builtin/branch.c index 5f150b4..8813d2e 100644 --- a/builtin/branch.c +++ b/builtin/branch.c @@ -152,21 +152,22 @@ static int delete_branches(int argc, const char **argv, int force, int kinds, struct commit *rev, *head_rev = NULL; unsigned char sha1[20]; char *name = NULL; - const char *fmt, *remote; + const char *fmt; int i; int ret = 0; + int remote_branch = 0; struct strbuf bname = STRBUF_INIT; switch (kinds) { case REF_REMOTE_BRANCH: fmt = "refs/remotes/%s"; - /* TRANSLATORS: This is "remote " in "remote branch '%s' not found" */ - remote = _("remote "); + /* For subsequent UI messages */ + remote_branch = 1; + force = 1; break; case REF_LOCAL_BRANCH: fmt = "refs/heads/%s"; - remote = ""; break; default: die(_("cannot use -a with -d")); @@ -190,8 +191,9 @@ static int delete_branches(int argc, const char **argv, int force, int kinds, name = xstrdup(mkpath(fmt, bname.buf)); if (read_ref(name, sha1)) { - error(_("%sbranch '%s' not found."), - remote, bname.buf); + error(remote_branch + ? _("remote branch '%s' not found.") + : _("branch '%s' not found."), bname.buf); ret = 1; continue; } @@ -212,14 +214,18 @@ static int delete_branches(int argc, const char **argv, int force, int kinds, } if (delete_ref(name, sha1, 0)) { - error(_("Error deleting %sbranch '%s'"), remote, + error(remote_branch + ? _("Error deleting remote branch '%s'") + : _("Error deleting branch '%s'"), bname.buf); ret = 1; } else { struct strbuf buf = STRBUF_INIT; if (!quiet) - printf(_("Deleted %sbranch %s (was %s).\n"), - remote, bname.buf, + printf(remote_branch + ? _("Deleted remote branch %s (was %s).\n") + : _("Deleted branch %s (was %s).\n"), + bname.buf, find_unique_abbrev(sha1, DEFAULT_ABBREV)); strbuf_addf(&buf, "branch.%s", bname.buf); if (git_config_rename_section(buf.buf, NULL) < 0) diff --git a/builtin/commit.c b/builtin/commit.c index b257ae8..0178029 100644 --- a/builtin/commit.c +++ b/builtin/commit.c @@ -194,24 +194,6 @@ static void determine_whence(struct wt_status *s) s->whence = whence; } -static const char *whence_s(void) -{ - const char *s = ""; - - switch (whence) { - case FROM_COMMIT: - break; - case FROM_MERGE: - s = _("merge"); - break; - case FROM_CHERRY_PICK: - s = _("cherry-pick"); - break; - } - - return s; -} - static void rollback_index_files(void) { switch (commit_style) { @@ -453,8 +435,12 @@ static char *prepare_index(int argc, const char **argv, const char *prefix, */ commit_style = COMMIT_PARTIAL; - if (whence != FROM_COMMIT) - die(_("cannot do a partial commit during a %s."), whence_s()); + if (whence != FROM_COMMIT) { + if (whence == FROM_MERGE) + die(_("cannot do a partial commit during a merge.")); + else if (whence == FROM_CHERRY_PICK) + die(_("cannot do a partial commit during a cherry-pick.")); + } memset(&partial, 0, sizeof(partial)); partial.strdup_strings = 1; @@ -796,28 +782,31 @@ static int prepare_to_commit(const char *index_file, const char *prefix, char *ai_tmp, *ci_tmp; if (whence != FROM_COMMIT) status_printf_ln(s, GIT_COLOR_NORMAL, - _("\n" - "It looks like you may be committing a %s.\n" - "If this is not correct, please remove the file\n" - " %s\n" - "and try again.\n" - ""), - whence_s(), + whence == FROM_MERGE + ? _("\n" + "It looks like you may be committing a merge.\n" + "If this is not correct, please remove the file\n" + " %s\n" + "and try again.\n") + : _("\n" + "It looks like you may be committing a cherry-pick.\n" + "If this is not correct, please remove the file\n" + " %s\n" + "and try again.\n"), git_path(whence == FROM_MERGE ? "MERGE_HEAD" : "CHERRY_PICK_HEAD")); fprintf(s->fp, "\n"); - status_printf(s, GIT_COLOR_NORMAL, - _("Please enter the commit message for your changes.")); if (cleanup_mode == CLEANUP_ALL) - status_printf_more(s, GIT_COLOR_NORMAL, - _(" Lines starting\n" - "with '#' will be ignored, and an empty" + status_printf(s, GIT_COLOR_NORMAL, + _("Please enter the commit message for your changes." + " Lines starting\nwith '#' will be ignored, and an empty" " message aborts the commit.\n")); else /* CLEANUP_SPACE, that is. */ - status_printf_more(s, GIT_COLOR_NORMAL, - _(" Lines starting\n" + status_printf(s, GIT_COLOR_NORMAL, + _("Please enter the commit message for your changes." + " Lines starting\n" "with '#' will be kept; you may remove them" " yourself if you want to.\n" "An empty message aborts the commit.\n")); @@ -1072,8 +1061,12 @@ static int parse_and_validate_options(int argc, const char *argv[], /* Sanity check options */ if (amend && !current_head) die(_("You have nothing to amend.")); - if (amend && whence != FROM_COMMIT) - die(_("You are in the middle of a %s -- cannot amend."), whence_s()); + if (amend && whence != FROM_COMMIT) { + if (whence == FROM_MERGE) + die(_("You are in the middle of a merge -- cannot amend.")); + else if (whence == FROM_CHERRY_PICK) + die(_("You are in the middle of a cherry-pick -- cannot amend.")); + } if (fixup_message && squash_message) die(_("Options --squash and --fixup cannot be used together")); if (use_message) diff --git a/builtin/fetch.c b/builtin/fetch.c index 1c8cb62..bb9a074 100644 --- a/builtin/fetch.c +++ b/builtin/fetch.c @@ -546,8 +546,8 @@ static int prune_refs(struct refspec *refs, int ref_count, struct ref *ref_map) int result = 0; struct ref *ref, *stale_refs = get_stale_heads(refs, ref_count, ref_map); const char *dangling_msg = dry_run - ? _(" (%s will become dangling)\n") - : _(" (%s has become dangling)\n"); + ? _(" (%s will become dangling)") + : _(" (%s has become dangling)"); for (ref = stale_refs; ref; ref = ref->next) { if (!dry_run) diff --git a/builtin/help.c b/builtin/help.c index 61ff798..e63668a 100644 --- a/builtin/help.c +++ b/builtin/help.c @@ -54,7 +54,7 @@ static enum help_format parse_help_format(const char *format) return HELP_FORMAT_INFO; if (!strcmp(format, "web") || !strcmp(format, "html")) return HELP_FORMAT_WEB; - die("unrecognized help format '%s'", format); + die(_("unrecognized help format '%s'"), format); } static const char *get_man_viewer_info(const char *name) @@ -82,7 +82,7 @@ static int check_emacsclient_version(void) ec_process.err = -1; ec_process.stdout_to_stderr = 1; if (start_command(&ec_process)) - return error("Failed to start emacsclient."); + return error(_("Failed to start emacsclient.")); strbuf_read(&buffer, ec_process.err, 20); close(ec_process.err); @@ -95,7 +95,7 @@ static int check_emacsclient_version(void) if (prefixcmp(buffer.buf, "emacsclient")) { strbuf_release(&buffer); - return error("Failed to parse emacsclient version."); + return error(_("Failed to parse emacsclient version.")); } strbuf_remove(&buffer, 0, strlen("emacsclient")); @@ -103,7 +103,7 @@ static int check_emacsclient_version(void) if (version < 22) { strbuf_release(&buffer); - return error("emacsclient version '%d' too old (< 22).", + return error(_("emacsclient version '%d' too old (< 22)."), version); } @@ -121,7 +121,7 @@ static void exec_woman_emacs(const char *path, const char *page) path = "emacsclient"; strbuf_addf(&man_page, "(woman \"%s\")", page); execlp(path, "emacsclient", "-e", man_page.buf, (char *)NULL); - warning("failed to exec '%s': %s", path, strerror(errno)); + warning(_("failed to exec '%s': %s"), path, strerror(errno)); } } @@ -149,7 +149,7 @@ static void exec_man_konqueror(const char *path, const char *page) path = "kfmclient"; strbuf_addf(&man_page, "man:%s(1)", page); execlp(path, filename, "newTab", man_page.buf, (char *)NULL); - warning("failed to exec '%s': %s", path, strerror(errno)); + warning(_("failed to exec '%s': %s"), path, strerror(errno)); } } @@ -158,7 +158,7 @@ static void exec_man_man(const char *path, const char *page) if (!path) path = "man"; execlp(path, "man", page, (char *)NULL); - warning("failed to exec '%s': %s", path, strerror(errno)); + warning(_("failed to exec '%s': %s"), path, strerror(errno)); } static void exec_man_cmd(const char *cmd, const char *page) @@ -166,7 +166,7 @@ static void exec_man_cmd(const char *cmd, const char *page) struct strbuf shell_cmd = STRBUF_INIT; strbuf_addf(&shell_cmd, "%s %s", cmd, page); execl("/bin/sh", "sh", "-c", shell_cmd.buf, (char *)NULL); - warning("failed to exec '%s': %s", cmd, strerror(errno)); + warning(_("failed to exec '%s': %s"), cmd, strerror(errno)); } static void add_man_viewer(const char *name) @@ -206,8 +206,8 @@ static int add_man_viewer_path(const char *name, if (supported_man_viewer(name, len)) do_add_man_viewer_info(name, len, value); else - warning("'%s': path for unsupported man viewer.\n" - "Please consider using 'man.<tool>.cmd' instead.", + warning(_("'%s': path for unsupported man viewer.\n" + "Please consider using 'man.<tool>.cmd' instead."), name); return 0; @@ -218,8 +218,8 @@ static int add_man_viewer_cmd(const char *name, const char *value) { if (supported_man_viewer(name, len)) - warning("'%s': cmd for supported man viewer.\n" - "Please consider using 'man.<tool>.path' instead.", + warning(_("'%s': cmd for supported man viewer.\n" + "Please consider using 'man.<tool>.path' instead."), name); else do_add_man_viewer_info(name, len, value); @@ -280,11 +280,11 @@ void list_common_cmds_help(void) longest = strlen(common_cmds[i].name); } - puts("The most commonly used git commands are:"); + puts(_("The most commonly used git commands are:")); for (i = 0; i < ARRAY_SIZE(common_cmds); i++) { printf(" %s ", common_cmds[i].name); mput_char(' ', longest - strlen(common_cmds[i].name)); - puts(common_cmds[i].help); + puts(_(common_cmds[i].help)); } } @@ -348,7 +348,7 @@ static void exec_viewer(const char *name, const char *page) else if (info) exec_man_cmd(info, page); else - warning("'%s': unknown man viewer.", name); + warning(_("'%s': unknown man viewer."), name); } static void show_man_page(const char *git_cmd) @@ -365,7 +365,7 @@ static void show_man_page(const char *git_cmd) if (fallback) exec_viewer(fallback, page); exec_viewer("man", page); - die("no man viewer handled the request"); + die(_("no man viewer handled the request")); } static void show_info_page(const char *git_cmd) @@ -373,7 +373,7 @@ static void show_info_page(const char *git_cmd) const char *page = cmd_to_page(git_cmd); setenv("INFOPATH", system_path(GIT_INFO_PATH), 1); execlp("info", "info", "gitman", page, (char *)NULL); - die("no info viewer handled the request"); + die(_("no info viewer handled the request")); } static void get_html_page_path(struct strbuf *page_path, const char *page) @@ -384,7 +384,7 @@ static void get_html_page_path(struct strbuf *page_path, const char *page) /* Check that we have a git documentation directory. */ if (stat(mkpath("%s/git.html", html_path), &st) || !S_ISREG(st.st_mode)) - die("'%s': not a documentation directory.", html_path); + die(_("'%s': not a documentation directory."), html_path); strbuf_init(page_path, 0); strbuf_addf(page_path, "%s/%s.html", html_path, page); @@ -424,16 +424,16 @@ int cmd_help(int argc, const char **argv, const char *prefix) parsed_help_format = help_format; if (show_all) { - printf("usage: %s\n\n", git_usage_string); - list_commands("git commands", &main_cmds, &other_cmds); - printf("%s\n", git_more_info_string); + printf(_("usage: %s%s"), _(git_usage_string), "\n\n"); + list_commands(&main_cmds, &other_cmds); + printf("%s\n", _(git_more_info_string)); return 0; } if (!argv[0]) { - printf("usage: %s\n\n", git_usage_string); + printf(_("usage: %s%s"), _(git_usage_string), "\n\n"); list_common_cmds_help(); - printf("\n%s\n", git_more_info_string); + printf("\n%s\n", _(git_more_info_string)); return 0; } @@ -445,7 +445,7 @@ int cmd_help(int argc, const char **argv, const char *prefix) alias = alias_lookup(argv[0]); if (alias && !is_git_command(argv[0])) { - printf("`git %s' is aliased to `%s'\n", argv[0], alias); + printf_ln(_("`git %s' is aliased to `%s'"), argv[0], alias); return 0; } diff --git a/builtin/index-pack.c b/builtin/index-pack.c index dd1c5c9..83555e5 100644 --- a/builtin/index-pack.c +++ b/builtin/index-pack.c @@ -81,7 +81,7 @@ static int mark_link(struct object *obj, int type, void *data) return -1; if (type != OBJ_ANY && obj->type != type) - die("object type mismatch at %s", sha1_to_hex(obj->sha1)); + die(_("object type mismatch at %s"), sha1_to_hex(obj->sha1)); obj->flags |= FLAG_LINK; return 0; @@ -101,7 +101,7 @@ static void check_object(struct object *obj) unsigned long size; int type = sha1_object_info(obj->sha1, &size); if (type != obj->type || type <= 0) - die("object of unexpected type"); + die(_("object of unexpected type")); obj->flags |= FLAG_CHECKED; return; } @@ -138,15 +138,18 @@ static void *fill(int min) if (min <= input_len) return input_buffer + input_offset; if (min > sizeof(input_buffer)) - die("cannot fill %d bytes", min); + die(Q_("cannot fill %d byte", + "cannot fill %d bytes", + min), + min); flush(); do { ssize_t ret = xread(input_fd, input_buffer + input_len, sizeof(input_buffer) - input_len); if (ret <= 0) { if (!ret) - die("early EOF"); - die_errno("read error on input"); + die(_("early EOF")); + die_errno(_("read error on input")); } input_len += ret; if (from_stdin) @@ -158,14 +161,14 @@ static void *fill(int min) static void use(int bytes) { if (bytes > input_len) - die("used more bytes than were available"); + die(_("used more bytes than were available")); input_crc32 = crc32(input_crc32, input_buffer + input_offset, bytes); input_len -= bytes; input_offset += bytes; /* make sure off_t is sufficiently large not to wrap */ if (signed_add_overflows(consumed_bytes, bytes)) - die("pack too large for current definition of off_t"); + die(_("pack too large for current definition of off_t")); consumed_bytes += bytes; } @@ -181,12 +184,12 @@ static const char *open_pack_file(const char *pack_name) } else output_fd = open(pack_name, O_CREAT|O_EXCL|O_RDWR, 0600); if (output_fd < 0) - die_errno("unable to create '%s'", pack_name); + die_errno(_("unable to create '%s'"), pack_name); pack_fd = output_fd; } else { input_fd = open(pack_name, O_RDONLY); if (input_fd < 0) - die_errno("cannot open packfile '%s'", pack_name); + die_errno(_("cannot open packfile '%s'"), pack_name); output_fd = -1; pack_fd = input_fd; } @@ -200,7 +203,7 @@ static void parse_pack_header(void) /* Header consistency check */ if (hdr->hdr_signature != htonl(PACK_SIGNATURE)) - die("pack signature mismatch"); + die(_("pack signature mismatch")); if (!pack_version_ok(hdr->hdr_version)) die("pack version %"PRIu32" unsupported", ntohl(hdr->hdr_version)); @@ -220,7 +223,7 @@ static NORETURN void bad_object(unsigned long offset, const char *format, ...) va_start(params, format); vsnprintf(buf, sizeof(buf), format, params); va_end(params); - die("pack has bad object at offset %lu: %s", offset, buf); + die(_("pack has bad object at offset %lu: %s"), offset, buf); } static struct base_data *alloc_base_data(void) @@ -294,7 +297,7 @@ static void *unpack_entry_data(unsigned long offset, unsigned long size) use(input_len - stream.avail_in); } while (status == Z_OK); if (stream.total_out != size || status != Z_STREAM_END) - bad_object(offset, "inflate returned %d", status); + bad_object(offset, _("inflate returned %d"), status); git_inflate_end(&stream); return buf; } @@ -339,7 +342,7 @@ static void *unpack_raw_entry(struct object_entry *obj, union delta_base *delta_ while (c & 128) { base_offset += 1; if (!base_offset || MSB(base_offset, 7)) - bad_object(obj->idx.offset, "offset value overflow for delta base object"); + bad_object(obj->idx.offset, _("offset value overflow for delta base object")); p = fill(1); c = *p; use(1); @@ -347,7 +350,7 @@ static void *unpack_raw_entry(struct object_entry *obj, union delta_base *delta_ } delta_base->offset = obj->idx.offset - base_offset; if (delta_base->offset <= 0 || delta_base->offset >= obj->idx.offset) - bad_object(obj->idx.offset, "delta base offset is out of bound"); + bad_object(obj->idx.offset, _("delta base offset is out of bound")); break; case OBJ_COMMIT: case OBJ_TREE: @@ -355,7 +358,7 @@ static void *unpack_raw_entry(struct object_entry *obj, union delta_base *delta_ case OBJ_TAG: break; default: - bad_object(obj->idx.offset, "unknown object type %d", obj->type); + bad_object(obj->idx.offset, _("unknown object type %d"), obj->type); } obj->hdr_size = consumed_bytes - obj->idx.offset; @@ -384,9 +387,12 @@ static void *get_data_from_pack(struct object_entry *obj) ssize_t n = (len < 64*1024) ? len : 64*1024; n = pread(pack_fd, inbuf, n, from); if (n < 0) - die_errno("cannot pread pack file"); + die_errno(_("cannot pread pack file")); if (!n) - die("premature end of pack file, %lu bytes missing", len); + die(Q_("premature end of pack file, %lu byte missing", + "premature end of pack file, %lu bytes missing", + len), + len); from += n; len -= n; stream.next_in = inbuf; @@ -396,7 +402,7 @@ static void *get_data_from_pack(struct object_entry *obj) /* This has been inflated OK when first encountered, so... */ if (status != Z_STREAM_END || stream.total_out != obj->size) - die("serious inflate inconsistency"); + die(_("serious inflate inconsistency")); git_inflate_end(&stream); free(inbuf); @@ -467,10 +473,10 @@ static void sha1_object(const void *data, unsigned long size, unsigned long has_size; has_data = read_sha1_file(sha1, &has_type, &has_size); if (!has_data) - die("cannot read existing object %s", sha1_to_hex(sha1)); + die(_("cannot read existing object %s"), sha1_to_hex(sha1)); if (size != has_size || type != has_type || memcmp(data, has_data, size) != 0) - die("SHA1 COLLISION FOUND WITH %s !", sha1_to_hex(sha1)); + die(_("SHA1 COLLISION FOUND WITH %s !"), sha1_to_hex(sha1)); free(has_data); } if (strict) { @@ -479,7 +485,7 @@ static void sha1_object(const void *data, unsigned long size, if (blob) blob->object.flags |= FLAG_CHECKED; else - die("invalid blob object %s", sha1_to_hex(sha1)); + die(_("invalid blob object %s"), sha1_to_hex(sha1)); } else { struct object *obj; int eaten; @@ -491,11 +497,11 @@ static void sha1_object(const void *data, unsigned long size, */ obj = parse_object_buffer(sha1, type, size, buf, &eaten); if (!obj) - die("invalid %s", typename(type)); + die(_("invalid %s"), typename(type)); if (fsck_object(obj, 1, fsck_error_function)) - die("Error in object"); + die(_("Error in object")); if (fsck_walk(obj, mark_link, NULL)) - die("Not all child objects of %s are reachable", sha1_to_hex(obj->sha1)); + die(_("Not all child objects of %s are reachable"), sha1_to_hex(obj->sha1)); if (obj->type == OBJ_TREE) { struct tree *item = (struct tree *) obj; @@ -567,7 +573,7 @@ static void *get_base_data(struct base_data *c) &c->size); free(raw); if (!c->data) - bad_object(obj->idx.offset, "failed to apply delta"); + bad_object(obj->idx.offset, _("failed to apply delta")); base_cache_used += c->size; prune_base_data(c); } @@ -593,7 +599,7 @@ static void resolve_delta(struct object_entry *delta_obj, delta_data, delta_obj->size, &result->size); free(delta_data); if (!result->data) - bad_object(delta_obj->idx.offset, "failed to apply delta"); + bad_object(delta_obj->idx.offset, _("failed to apply delta")); sha1_object(result->data, result->size, delta_obj->real_type, delta_obj->idx.sha1); nr_resolved_deltas++; @@ -697,7 +703,7 @@ static void parse_pack_objects(unsigned char *sha1) */ if (verbose) progress = start_progress( - from_stdin ? "Receiving objects" : "Indexing objects", + from_stdin ? _("Receiving objects") : _("Indexing objects"), nr_objects); for (i = 0; i < nr_objects; i++) { struct object_entry *obj = &objects[i]; @@ -719,15 +725,15 @@ static void parse_pack_objects(unsigned char *sha1) flush(); git_SHA1_Final(sha1, &input_ctx); if (hashcmp(fill(20), sha1)) - die("pack is corrupted (SHA1 mismatch)"); + die(_("pack is corrupted (SHA1 mismatch)")); use(20); /* If input_fd is a file, we should have reached its end now. */ if (fstat(input_fd, &st)) - die_errno("cannot fstat packfile"); + die_errno(_("cannot fstat packfile")); if (S_ISREG(st.st_mode) && lseek(input_fd, 0, SEEK_CUR) - input_len != st.st_size) - die("pack has junk at the end"); + die(_("pack has junk at the end")); if (!nr_deltas) return; @@ -745,7 +751,7 @@ static void parse_pack_objects(unsigned char *sha1) * for some more deltas. */ if (verbose) - progress = start_progress("Resolving deltas", nr_deltas); + progress = start_progress(_("Resolving deltas"), nr_deltas); for (i = 0; i < nr_objects; i++) { struct object_entry *obj = &objects[i]; struct base_data *base_obj = alloc_base_data(); @@ -778,7 +784,7 @@ static int write_compressed(struct sha1file *f, void *in, unsigned int size) } while (status == Z_OK); if (status != Z_STREAM_END) - die("unable to deflate appended object (%d)", status); + die(_("unable to deflate appended object (%d)"), status); size = stream.total_out; git_deflate_end(&stream); return size; @@ -857,7 +863,7 @@ static void fix_unresolved_deltas(struct sha1file *f, int nr_unresolved) if (check_sha1_signature(d->base.sha1, base_obj->data, base_obj->size, typename(type))) - die("local object %s is corrupt", sha1_to_hex(d->base.sha1)); + die(_("local object %s is corrupt"), sha1_to_hex(d->base.sha1)); base_obj->obj = append_obj_to_pack(f, d->base.sha1, base_obj->data, base_obj->size, type); find_unresolved_deltas(base_obj); @@ -881,7 +887,7 @@ static void final(const char *final_pack_name, const char *curr_pack_name, fsync_or_die(output_fd, curr_pack_name); err = close(output_fd); if (err) - die_errno("error while closing pack file"); + die_errno(_("error while closing pack file")); } if (keep_msg) { @@ -894,7 +900,7 @@ static void final(const char *final_pack_name, const char *curr_pack_name, if (keep_fd < 0) { if (errno != EEXIST) - die_errno("cannot write keep file '%s'", + die_errno(_("cannot write keep file '%s'"), keep_name); } else { if (keep_msg_len > 0) { @@ -902,7 +908,7 @@ static void final(const char *final_pack_name, const char *curr_pack_name, write_or_die(keep_fd, "\n", 1); } if (close(keep_fd) != 0) - die_errno("cannot close written keep file '%s'", + die_errno(_("cannot close written keep file '%s'"), keep_name); report = "keep"; } @@ -915,7 +921,7 @@ static void final(const char *final_pack_name, const char *curr_pack_name, final_pack_name = name; } if (move_temp_to_file(curr_pack_name, final_pack_name)) - die("cannot store pack file"); + die(_("cannot store pack file")); } else if (from_stdin) chmod(final_pack_name, 0444); @@ -926,7 +932,7 @@ static void final(const char *final_pack_name, const char *curr_pack_name, final_index_name = name; } if (move_temp_to_file(curr_index_name, final_index_name)) - die("cannot store index file"); + die(_("cannot store index file")); } else chmod(final_index_name, 0444); @@ -1015,9 +1021,9 @@ static void read_idx_option(struct pack_idx_option *opts, const char *pack_name) struct packed_git *p = add_packed_git(pack_name, strlen(pack_name), 1); if (!p) - die("Cannot open existing pack file '%s'", pack_name); + die(_("Cannot open existing pack file '%s'"), pack_name); if (open_pack_index(p)) - die("Cannot open existing pack idx file for '%s'", pack_name); + die(_("Cannot open existing pack idx file for '%s'"), pack_name); /* Read the attributes from the existing idx file */ opts->version = p->index_version; @@ -1064,15 +1070,18 @@ static void show_pack_info(int stat_only) } if (baseobjects) - printf("non delta: %d object%s\n", - baseobjects, baseobjects > 1 ? "s" : ""); + printf_ln(Q_("non delta: %d object", + "non delta: %d objects", + baseobjects), + baseobjects); for (i = 0; i < deepest_delta; i++) { if (!chain_histogram[i]) continue; - printf("chain length = %d: %lu object%s\n", - i + 1, - chain_histogram[i], - chain_histogram[i] > 1 ? "s" : ""); + printf_ln(Q_("chain length = %d: %lu object", + "chain length = %d: %lu objects", + chain_histogram[i]), + i + 1, + chain_histogram[i]); } } @@ -1095,7 +1104,7 @@ int cmd_index_pack(int argc, const char **argv, const char *prefix) reset_pack_idx_option(&opts); git_config(git_index_pack_config, &opts); if (prefix && chdir(prefix)) - die("Cannot come back to cwd"); + die(_("Cannot come back to cwd")); for (i = 1; i < argc; i++) { const char *arg = argv[i]; @@ -1128,10 +1137,10 @@ int cmd_index_pack(int argc, const char **argv, const char *prefix) hdr->hdr_signature = htonl(PACK_SIGNATURE); hdr->hdr_version = htonl(strtoul(arg + 14, &c, 10)); if (*c != ',') - die("bad %s", arg); + die(_("bad %s"), arg); hdr->hdr_entries = htonl(strtoul(c + 1, &c, 10)); if (*c) - die("bad %s", arg); + die(_("bad %s"), arg); input_len = sizeof(*hdr); } else if (!strcmp(arg, "-v")) { verbose = 1; @@ -1143,11 +1152,11 @@ int cmd_index_pack(int argc, const char **argv, const char *prefix) char *c; opts.version = strtoul(arg + 16, &c, 10); if (opts.version > 2) - die("bad %s", arg); + die(_("bad %s"), arg); if (*c == ',') opts.off32_limit = strtoul(c+1, &c, 0); if (*c || opts.off32_limit & 0x80000000) - die("bad %s", arg); + die(_("bad %s"), arg); } else usage(index_pack_usage); continue; @@ -1161,11 +1170,11 @@ int cmd_index_pack(int argc, const char **argv, const char *prefix) if (!pack_name && !from_stdin) usage(index_pack_usage); if (fix_thin_pack && !from_stdin) - die("--fix-thin cannot be used without --stdin"); + die(_("--fix-thin cannot be used without --stdin")); if (!index_name && pack_name) { int len = strlen(pack_name); if (!has_extension(pack_name, ".pack")) - die("packfile name '%s' does not end with '.pack'", + die(_("packfile name '%s' does not end with '.pack'"), pack_name); index_name_buf = xmalloc(len); memcpy(index_name_buf, pack_name, len - 5); @@ -1175,7 +1184,7 @@ int cmd_index_pack(int argc, const char **argv, const char *prefix) if (keep_msg && !keep_name && pack_name) { int len = strlen(pack_name); if (!has_extension(pack_name, ".pack")) - die("packfile name '%s' does not end with '.pack'", + die(_("packfile name '%s' does not end with '.pack'"), pack_name); keep_name_buf = xmalloc(len); memcpy(keep_name_buf, pack_name, len - 5); @@ -1184,7 +1193,7 @@ int cmd_index_pack(int argc, const char **argv, const char *prefix) } if (verify) { if (!index_name) - die("--verify with no packfile name given"); + die(_("--verify with no packfile name given")); read_idx_option(&opts, index_name); opts.flags |= WRITE_IDX_VERIFY | WRITE_IDX_STRICT; } @@ -1208,7 +1217,7 @@ int cmd_index_pack(int argc, const char **argv, const char *prefix) int nr_unresolved = nr_deltas - nr_resolved_deltas; int nr_objects_initial = nr_objects; if (nr_unresolved <= 0) - die("confusion beyond insanity"); + die(_("confusion beyond insanity")); objects = xrealloc(objects, (nr_objects + nr_unresolved + 1) * sizeof(*objects)); @@ -1227,7 +1236,9 @@ int cmd_index_pack(int argc, const char **argv, const char *prefix) "(disk corruption?)", curr_pack); } if (nr_deltas != nr_resolved_deltas) - die("pack has %d unresolved deltas", + die(Q_("pack has %d unresolved delta", + "pack has %d unresolved deltas", + nr_deltas - nr_resolved_deltas), nr_deltas - nr_resolved_deltas); } free(deltas); diff --git a/builtin/push.c b/builtin/push.c index 19c40d7..fdfcc6c 100644 --- a/builtin/push.c +++ b/builtin/push.c @@ -76,7 +76,44 @@ static int push_url_of_remote(struct remote *remote, const char ***url_p) return remote->url_nr; } -static void setup_push_upstream(struct remote *remote) +static NORETURN int die_push_simple(struct branch *branch, struct remote *remote) { + /* + * There's no point in using shorten_unambiguous_ref here, + * as the ambiguity would be on the remote side, not what + * we have locally. Plus, this is supposed to be the simple + * mode. If the user is doing something crazy like setting + * upstream to a non-branch, we should probably be showing + * them the big ugly fully qualified ref. + */ + const char *advice_maybe = ""; + const char *short_upstream = + skip_prefix(branch->merge[0]->src, "refs/heads/"); + + if (!short_upstream) + short_upstream = branch->merge[0]->src; + /* + * Don't show advice for people who explicitely set + * push.default. + */ + if (push_default == PUSH_DEFAULT_UNSPECIFIED) + advice_maybe = _("\n" + "To choose either option permanently, " + "see push.default in 'git help config'."); + die(_("The upstream branch of your current branch does not match\n" + "the name of your current branch. To push to the upstream branch\n" + "on the remote, use\n" + "\n" + " git push %s HEAD:%s\n" + "\n" + "To push to the branch of the same name on the remote, use\n" + "\n" + " git push %s %s\n" + "%s"), + remote->name, short_upstream, + remote->name, branch->name, advice_maybe); +} + +static void setup_push_upstream(struct remote *remote, int simple) { struct strbuf refspec = STRBUF_INIT; struct branch *branch = branch_get(NULL); @@ -103,6 +140,8 @@ static void setup_push_upstream(struct remote *remote) "your current branch '%s', without telling me what to push\n" "to update which remote branch."), remote->name, branch->name); + if (simple && strcmp(branch->refname, branch->merge[0]->src)) + die_push_simple(branch, remote); strbuf_addf(&refspec, "%s:%s", branch->name, branch->merge[0]->src); add_refspec(refspec.buf); @@ -119,8 +158,12 @@ static void setup_default_push_refspecs(struct remote *remote) add_refspec(":"); break; + case PUSH_DEFAULT_SIMPLE: + setup_push_upstream(remote, 1); + break; + case PUSH_DEFAULT_UPSTREAM: - setup_push_upstream(remote); + setup_push_upstream(remote, 0); break; case PUSH_DEFAULT_CURRENT: diff --git a/builtin/remote.c b/builtin/remote.c index b5645fe..0f0c594 100644 --- a/builtin/remote.c +++ b/builtin/remote.c @@ -95,9 +95,9 @@ static int fetch_remote(const char *name) argv[1] = "-v"; argv[2] = name; } - printf("Updating %s\n", name); + printf_ln(_("Updating %s"), name); if (run_command_v_opt(argv, RUN_GIT_CMD)) - return error("Could not fetch %s", name); + return error(_("Could not fetch %s"), name); return 0; } @@ -127,8 +127,8 @@ static int add_branch(const char *key, const char *branchname, } static const char mirror_advice[] = -"--mirror is dangerous and deprecated; please\n" -"\t use --mirror=fetch or --mirror=push instead"; +N_("--mirror is dangerous and deprecated; please\n" + "\t use --mirror=fetch or --mirror=push instead"); static int parse_mirror_opt(const struct option *opt, const char *arg, int not) { @@ -136,7 +136,7 @@ static int parse_mirror_opt(const struct option *opt, const char *arg, int not) if (not) *mirror = MIRROR_NONE; else if (!arg) { - warning("%s", mirror_advice); + warning("%s", _(mirror_advice)); *mirror = MIRROR_BOTH; } else if (!strcmp(arg, "fetch")) @@ -144,7 +144,7 @@ static int parse_mirror_opt(const struct option *opt, const char *arg, int not) else if (!strcmp(arg, "push")) *mirror = MIRROR_PUSH; else - return error("unknown mirror argument: %s", arg); + return error(_("unknown mirror argument: %s"), arg); return 0; } @@ -182,9 +182,9 @@ static int add(int argc, const char **argv) usage_with_options(builtin_remote_add_usage, options); if (mirror && master) - die("specifying a master branch makes no sense with --mirror"); + die(_("specifying a master branch makes no sense with --mirror")); if (mirror && !(mirror & MIRROR_FETCH) && track.nr) - die("specifying branches to track makes sense only with fetch mirrors"); + die(_("specifying branches to track makes sense only with fetch mirrors")); name = argv[0]; url = argv[1]; @@ -192,11 +192,11 @@ static int add(int argc, const char **argv) remote = remote_get(name); if (remote && (remote->url_nr > 1 || strcmp(name, remote->url[0]) || remote->fetch_refspec_nr)) - die("remote %s already exists.", name); + die(_("remote %s already exists."), name); strbuf_addf(&buf2, "refs/heads/test:refs/remotes/%s/test", name); if (!valid_fetch_refspec(buf2.buf)) - die("'%s' is not a valid remote name", name); + die(_("'%s' is not a valid remote name"), name); strbuf_addf(&buf, "remote.%s.url", name); if (git_config_set(buf.buf, url)) @@ -240,7 +240,7 @@ static int add(int argc, const char **argv) strbuf_addf(&buf2, "refs/remotes/%s/%s", name, master); if (create_symref(buf.buf, buf2.buf, "remote add")) - return error("Could not setup master '%s'", master); + return error(_("Could not setup master '%s'"), master); } strbuf_release(&buf); @@ -296,7 +296,7 @@ static int config_read_branches(const char *key, const char *value, void *cb) info = item->util; if (type == REMOTE) { if (info->remote_name) - warning("more than one %s", orig_key); + warning(_("more than one %s"), orig_key); info->remote_name = xstrdup(value); } else if (type == MERGE) { char *space = strchr(value, ' '); @@ -336,7 +336,7 @@ static int get_ref_states(const struct ref *remote_refs, struct ref_states *stat for (i = 0; i < states->remote->fetch_refspec_nr; i++) if (get_fetch_map(remote_refs, states->remote->fetch + i, &tail, 1)) - die("Could not get fetch map for refspec %s", + die(_("Could not get fetch map for refspec %s"), states->remote->fetch_refspec[i]); states->new.strdup_strings = 1; @@ -437,7 +437,7 @@ static int get_push_ref_states_noquery(struct ref_states *states) states->push.strdup_strings = 1; if (!remote->push_refspec_nr) { - item = string_list_append(&states->push, "(matching)"); + item = string_list_append(&states->push, _("(matching)")); info = item->util = xcalloc(sizeof(struct push_info), 1); info->status = PUSH_STATUS_NOTQUERIED; info->dest = xstrdup(item->string); @@ -445,11 +445,11 @@ static int get_push_ref_states_noquery(struct ref_states *states) for (i = 0; i < remote->push_refspec_nr; i++) { struct refspec *spec = remote->push + i; if (spec->matching) - item = string_list_append(&states->push, "(matching)"); + item = string_list_append(&states->push, _("(matching)")); else if (strlen(spec->src)) item = string_list_append(&states->push, spec->src); else - item = string_list_append(&states->push, "(delete)"); + item = string_list_append(&states->push, _("(delete)")); info = item->util = xcalloc(sizeof(struct push_info), 1); info->forced = spec->force; @@ -592,19 +592,19 @@ static int migrate_file(struct remote *remote) strbuf_addf(&buf, "remote.%s.url", remote->name); for (i = 0; i < remote->url_nr; i++) if (git_config_set_multivar(buf.buf, remote->url[i], "^$", 0)) - return error("Could not append '%s' to '%s'", + return error(_("Could not append '%s' to '%s'"), remote->url[i], buf.buf); strbuf_reset(&buf); strbuf_addf(&buf, "remote.%s.push", remote->name); for (i = 0; i < remote->push_refspec_nr; i++) if (git_config_set_multivar(buf.buf, remote->push_refspec[i], "^$", 0)) - return error("Could not append '%s' to '%s'", + return error(_("Could not append '%s' to '%s'"), remote->push_refspec[i], buf.buf); strbuf_reset(&buf); strbuf_addf(&buf, "remote.%s.fetch", remote->name); for (i = 0; i < remote->fetch_refspec_nr; i++) if (git_config_set_multivar(buf.buf, remote->fetch_refspec[i], "^$", 0)) - return error("Could not append '%s' to '%s'", + return error(_("Could not append '%s' to '%s'"), remote->fetch_refspec[i], buf.buf); if (remote->origin == REMOTE_REMOTES) path = git_path("remotes/%s", remote->name); @@ -636,30 +636,30 @@ static int mv(int argc, const char **argv) oldremote = remote_get(rename.old); if (!oldremote) - die("No such remote: %s", rename.old); + die(_("No such remote: %s"), rename.old); if (!strcmp(rename.old, rename.new) && oldremote->origin != REMOTE_CONFIG) return migrate_file(oldremote); newremote = remote_get(rename.new); if (newremote && (newremote->url_nr > 1 || newremote->fetch_refspec_nr)) - die("remote %s already exists.", rename.new); + die(_("remote %s already exists."), rename.new); strbuf_addf(&buf, "refs/heads/test:refs/remotes/%s/test", rename.new); if (!valid_fetch_refspec(buf.buf)) - die("'%s' is not a valid remote name", rename.new); + die(_("'%s' is not a valid remote name"), rename.new); strbuf_reset(&buf); strbuf_addf(&buf, "remote.%s", rename.old); strbuf_addf(&buf2, "remote.%s", rename.new); if (git_config_rename_section(buf.buf, buf2.buf) < 1) - return error("Could not rename config section '%s' to '%s'", + return error(_("Could not rename config section '%s' to '%s'"), buf.buf, buf2.buf); strbuf_reset(&buf); strbuf_addf(&buf, "remote.%s.fetch", rename.new); if (git_config_set_multivar(buf.buf, NULL, NULL, 1)) - return error("Could not remove config section '%s'", buf.buf); + return error(_("Could not remove config section '%s'"), buf.buf); strbuf_addf(&old_remote_context, ":refs/remotes/%s/", rename.old); for (i = 0; i < oldremote->fetch_refspec_nr; i++) { char *ptr; @@ -674,13 +674,13 @@ static int mv(int argc, const char **argv) strlen(rename.old), rename.new, strlen(rename.new)); } else - warning("Not updating non-default fetch respec\n" - "\t%s\n" - "\tPlease update the configuration manually if necessary.", + warning(_("Not updating non-default fetch respec\n" + "\t%s\n" + "\tPlease update the configuration manually if necessary."), buf2.buf); if (git_config_set_multivar(buf.buf, buf2.buf, "^$", 0)) - return error("Could not append '%s'", buf.buf); + return error(_("Could not append '%s'"), buf.buf); } read_branches(); @@ -691,7 +691,7 @@ static int mv(int argc, const char **argv) strbuf_reset(&buf); strbuf_addf(&buf, "branch.%s.remote", item->string); if (git_config_set(buf.buf, rename.new)) { - return error("Could not set '%s'", buf.buf); + return error(_("Could not set '%s'"), buf.buf); } } } @@ -713,7 +713,7 @@ static int mv(int argc, const char **argv) if (!(flag & REF_ISSYMREF)) continue; if (delete_ref(item->string, NULL, REF_NODEREF)) - die("deleting '%s' failed", item->string); + die(_("deleting '%s' failed"), item->string); } for (i = 0; i < remote_branches.nr; i++) { struct string_list_item *item = remote_branches.items + i; @@ -728,7 +728,7 @@ static int mv(int argc, const char **argv) strbuf_addf(&buf2, "remote: renamed %s to %s", item->string, buf.buf); if (rename_ref(item->string, buf.buf, buf2.buf)) - die("renaming '%s' failed", item->string); + die(_("renaming '%s' failed"), item->string); } for (i = 0; i < remote_branches.nr; i++) { struct string_list_item *item = remote_branches.items + i; @@ -747,7 +747,7 @@ static int mv(int argc, const char **argv) strbuf_addf(&buf3, "remote: renamed %s to %s", item->string, buf.buf); if (create_symref(buf.buf, buf2.buf, buf3.buf)) - die("creating '%s' failed", buf.buf); + die(_("creating '%s' failed"), buf.buf); } return 0; } @@ -761,7 +761,7 @@ static int remove_branches(struct string_list *branches) unsigned char *sha1 = item->util; if (delete_ref(refname, sha1, 0)) - result |= error("Could not remove branch %s", refname); + result |= error(_("Could not remove branch %s"), refname); } return result; } @@ -789,14 +789,14 @@ static int rm(int argc, const char **argv) remote = remote_get(argv[1]); if (!remote) - die("No such remote: %s", argv[1]); + die(_("No such remote: %s"), argv[1]); known_remotes.to_delete = remote; for_each_remote(add_known_remote, &known_remotes); strbuf_addf(&buf, "remote.%s", remote->name); if (git_config_rename_section(buf.buf, NULL) < 1) - return error("Could not remove config section '%s'", buf.buf); + return error(_("Could not remove config section '%s'"), buf.buf); read_branches(); for (i = 0; i < branch_list.nr; i++) { @@ -830,11 +830,12 @@ static int rm(int argc, const char **argv) string_list_clear(&branches, 1); if (skipped.nr) { - fprintf(stderr, skipped.nr == 1 ? - "Note: A branch outside the refs/remotes/ hierarchy was not removed;\n" - "to delete it, use:\n" : - "Note: Some branches outside the refs/remotes/ hierarchy were not removed;\n" - "to delete them, use:\n"); + fprintf_ln(stderr, + Q_("Note: A branch outside the refs/remotes/ hierarchy was not removed;\n" + "to delete it, use:", + "Note: Some branches outside the refs/remotes/ hierarchy were not removed;\n" + "to delete them, use:", + skipped.nr)); for (i = 0; i < skipped.nr; i++) fprintf(stderr, " git branch -d %s\n", skipped.items[i].string); @@ -886,7 +887,7 @@ static int get_remote_ref_states(const char *name, states->remote = remote_get(name); if (!states->remote) - return error("No such remote: %s", name); + return error(_("No such remote: %s"), name); read_branches(); @@ -939,14 +940,14 @@ static int show_remote_info_item(struct string_list_item *item, void *cb_data) const char *fmt = "%s"; const char *arg = ""; if (string_list_has_string(&states->new, name)) { - fmt = " new (next fetch will store in remotes/%s)"; + fmt = _(" new (next fetch will store in remotes/%s)"); arg = states->remote->name; } else if (string_list_has_string(&states->tracked, name)) - arg = " tracked"; + arg = _(" tracked"); else if (string_list_has_string(&states->stale, name)) - arg = " stale (use 'git remote prune' to remove)"; + arg = _(" stale (use 'git remote prune' to remove)"); else - arg = " ???"; + arg = _(" ???"); printf(" %-*s", info->width, name); printf(fmt, arg); printf("\n"); @@ -987,21 +988,21 @@ static int show_local_info_item(struct string_list_item *item, void *cb_data) int i; if (branch_info->rebase && branch_info->merge.nr > 1) { - error("invalid branch.%s.merge; cannot rebase onto > 1 branch", + error(_("invalid branch.%s.merge; cannot rebase onto > 1 branch"), item->string); return 0; } printf(" %-*s ", show_info->width, item->string); if (branch_info->rebase) { - printf("rebases onto remote %s\n", merge->items[0].string); + printf_ln(_("rebases onto remote %s"), merge->items[0].string); return 0; } else if (show_info->any_rebase) { - printf(" merges with remote %s\n", merge->items[0].string); - also = " and with remote"; + printf_ln(_(" merges with remote %s"), merge->items[0].string); + also = _(" and with remote"); } else { - printf("merges with remote %s\n", merge->items[0].string); - also = " and with remote"; + printf_ln(_("merges with remote %s"), merge->items[0].string); + also = _(" and with remote"); } for (i = 1; i < merge->nr; i++) printf(" %-*s %s %s\n", show_info->width, "", also, @@ -1043,36 +1044,43 @@ static int show_push_info_item(struct string_list_item *item, void *cb_data) { struct show_info *show_info = cb_data; struct push_info *push_info = item->util; - char *src = item->string, *status = NULL; + const char *src = item->string, *status = NULL; switch (push_info->status) { case PUSH_STATUS_CREATE: - status = "create"; + status = _("create"); break; case PUSH_STATUS_DELETE: - status = "delete"; - src = "(none)"; + status = _("delete"); + src = _("(none)"); break; case PUSH_STATUS_UPTODATE: - status = "up to date"; + status = _("up to date"); break; case PUSH_STATUS_FASTFORWARD: - status = "fast-forwardable"; + status = _("fast-forwardable"); break; case PUSH_STATUS_OUTOFDATE: - status = "local out of date"; + status = _("local out of date"); break; case PUSH_STATUS_NOTQUERIED: break; } - if (status) - printf(" %-*s %s to %-*s (%s)\n", show_info->width, src, - push_info->forced ? "forces" : "pushes", - show_info->width2, push_info->dest, status); - else - printf(" %-*s %s to %s\n", show_info->width, src, - push_info->forced ? "forces" : "pushes", - push_info->dest); + if (status) { + if (push_info->forced) + printf_ln(_(" %-*s forces to %-*s (%s)"), show_info->width, src, + show_info->width2, push_info->dest, status); + else + printf_ln(_(" %-*s pushes to %-*s (%s)"), show_info->width, src, + show_info->width2, push_info->dest, status); + } else { + if (push_info->forced) + printf_ln(_(" %-*s forces to %s"), show_info->width, src, + push_info->dest); + else + printf_ln(_(" %-*s pushes to %s"), show_info->width, src, + push_info->dest); + } return 0; } @@ -1107,9 +1115,9 @@ static int show(int argc, const char **argv) get_remote_ref_states(*argv, &states, query_flag); - printf("* remote %s\n", *argv); - printf(" Fetch URL: %s\n", states.remote->url_nr > 0 ? - states.remote->url[0] : "(no URL)"); + printf_ln(_("* remote %s"), *argv); + printf_ln(_(" Fetch URL: %s"), states.remote->url_nr > 0 ? + states.remote->url[0] : _("(no URL)")); if (states.remote->pushurl_nr) { url = states.remote->pushurl; url_nr = states.remote->pushurl_nr; @@ -1118,18 +1126,18 @@ static int show(int argc, const char **argv) url_nr = states.remote->url_nr; } for (i = 0; i < url_nr; i++) - printf(" Push URL: %s\n", url[i]); + printf_ln(_(" Push URL: %s"), url[i]); if (!i) - printf(" Push URL: %s\n", "(no URL)"); + printf_ln(_(" Push URL: %s"), "(no URL)"); if (no_query) - printf(" HEAD branch: (not queried)\n"); + printf_ln(_(" HEAD branch: %s"), "(not queried)"); else if (!states.heads.nr) - printf(" HEAD branch: (unknown)\n"); + printf_ln(_(" HEAD branch: %s"), "(unknown)"); else if (states.heads.nr == 1) - printf(" HEAD branch: %s\n", states.heads.items[0].string); + printf_ln(_(" HEAD branch: %s"), states.heads.items[0].string); else { - printf(" HEAD branch (remote HEAD is ambiguous," - " may be one of the following):\n"); + printf(_(" HEAD branch (remote HEAD is ambiguous," + " may be one of the following):\n")); for (i = 0; i < states.heads.nr; i++) printf(" %s\n", states.heads.items[i].string); } @@ -1140,9 +1148,10 @@ static int show(int argc, const char **argv) for_each_string_list(&states.tracked, add_remote_to_show_info, &info); for_each_string_list(&states.stale, add_remote_to_show_info, &info); if (info.list->nr) - printf(" Remote branch%s:%s\n", - info.list->nr > 1 ? "es" : "", - no_query ? " (status not queried)" : ""); + printf_ln(Q_(" Remote branch:%s", + " Remote branches:%s", + info.list->nr), + no_query ? _(" (status not queried)") : ""); for_each_string_list(info.list, show_remote_info_item, &info); string_list_clear(info.list, 0); @@ -1151,23 +1160,25 @@ static int show(int argc, const char **argv) info.any_rebase = 0; for_each_string_list(&branch_list, add_local_to_show_info, &info); if (info.list->nr) - printf(" Local branch%s configured for 'git pull':\n", - info.list->nr > 1 ? "es" : ""); + printf_ln(Q_(" Local branch configured for 'git pull':", + " Local branches configured for 'git pull':", + info.list->nr)); for_each_string_list(info.list, show_local_info_item, &info); string_list_clear(info.list, 0); /* git push info */ if (states.remote->mirror) - printf(" Local refs will be mirrored by 'git push'\n"); + printf_ln(_(" Local refs will be mirrored by 'git push'")); info.width = info.width2 = 0; for_each_string_list(&states.push, add_push_to_show_info, &info); qsort(info.list->items, info.list->nr, sizeof(*info.list->items), cmp_string_with_push); if (info.list->nr) - printf(" Local ref%s configured for 'git push'%s:\n", - info.list->nr > 1 ? "s" : "", - no_query ? " (status not queried)" : ""); + printf_ln(Q_(" Local ref configured for 'git push'%s:", + " Local refs configured for 'git push'%s:", + info.list->nr), + no_query ? _(" (status not queried)") : ""); for_each_string_list(info.list, show_push_info_item, &info); string_list_clear(info.list, 0); @@ -1202,10 +1213,10 @@ static int set_head(int argc, const char **argv) memset(&states, 0, sizeof(states)); get_remote_ref_states(argv[0], &states, GET_HEAD_NAMES); if (!states.heads.nr) - result |= error("Cannot determine remote HEAD"); + result |= error(_("Cannot determine remote HEAD")); else if (states.heads.nr > 1) { - result |= error("Multiple remote HEAD branches. " - "Please choose one explicitly with:"); + result |= error(_("Multiple remote HEAD branches. " + "Please choose one explicitly with:")); for (i = 0; i < states.heads.nr; i++) fprintf(stderr, " git remote set-head %s %s\n", argv[0], states.heads.items[i].string); @@ -1214,7 +1225,7 @@ static int set_head(int argc, const char **argv) free_remote_ref_states(&states); } else if (opt_d && !opt_a && argc == 1) { if (delete_ref(buf.buf, NULL, REF_NODEREF)) - result |= error("Could not delete %s", buf.buf); + result |= error(_("Could not delete %s"), buf.buf); } else usage_with_options(builtin_remote_sethead_usage, options); @@ -1222,9 +1233,9 @@ static int set_head(int argc, const char **argv) strbuf_addf(&buf2, "refs/remotes/%s/%s", argv[0], head_name); /* make sure it's valid */ if (!ref_exists(buf2.buf)) - result |= error("Not a valid ref: %s", buf2.buf); + result |= error(_("Not a valid ref: %s"), buf2.buf); else if (create_symref(buf.buf, buf2.buf, "remote set-head")) - result |= error("Could not setup %s", buf.buf); + result |= error(_("Could not setup %s"), buf.buf); if (opt_a) printf("%s/HEAD set to %s\n", argv[0], head_name); free(head_name); @@ -1260,18 +1271,18 @@ static int prune_remote(const char *remote, int dry_run) int result = 0, i; struct ref_states states; const char *dangling_msg = dry_run - ? " %s will become dangling!\n" - : " %s has become dangling!\n"; + ? _(" %s will become dangling!") + : _(" %s has become dangling!"); memset(&states, 0, sizeof(states)); get_remote_ref_states(remote, &states, GET_REF_STATES); if (states.stale.nr) { - printf("Pruning %s\n", remote); - printf("URL: %s\n", + printf_ln(_("Pruning %s"), remote); + printf_ln(_("URL: %s"), states.remote->url_nr ? states.remote->url[0] - : "(no URL)"); + : _("(no URL)")); } for (i = 0; i < states.stale.nr; i++) { @@ -1280,8 +1291,12 @@ static int prune_remote(const char *remote, int dry_run) if (!dry_run) result |= delete_ref(refname, NULL, 0); - printf(" * [%s] %s\n", dry_run ? "would prune" : "pruned", - abbrev_ref(refname, "refs/remotes/")); + if (dry_run) + printf_ln(_(" * [would prune] %s"), + abbrev_ref(refname, "refs/remotes/")); + else + printf_ln(_(" * [pruned] %s"), + abbrev_ref(refname, "refs/remotes/")); warn_dangling_symref(stdout, dangling_msg, refname); } @@ -1369,7 +1384,7 @@ static int set_remote_branches(const char *remotename, const char **branches, strbuf_addf(&key, "remote.%s.fetch", remotename); if (!remote_is_configured(remotename)) - die("No such remote '%s'", remotename); + die(_("No such remote '%s'"), remotename); remote = remote_get(remotename); if (!add_mode && remove_all_fetch_refspecs(remotename, key.buf)) { @@ -1396,7 +1411,7 @@ static int set_branches(int argc, const char **argv) argc = parse_options(argc, argv, NULL, options, builtin_remote_setbranches_usage, 0); if (argc == 0) { - error("no remote specified"); + error(_("no remote specified")); usage_with_options(builtin_remote_setbranches_usage, options); } argv[argc] = NULL; @@ -1429,7 +1444,7 @@ static int set_url(int argc, const char **argv) PARSE_OPT_KEEP_ARGV0); if (add_mode && delete_mode) - die("--add --delete doesn't make sense"); + die(_("--add --delete doesn't make sense")); if (argc < 3 || argc > 4 || ((add_mode || delete_mode) && argc != 3)) usage_with_options(builtin_remote_seturl_usage, options); @@ -1443,7 +1458,7 @@ static int set_url(int argc, const char **argv) oldurl = newurl; if (!remote_is_configured(remotename)) - die("No such remote '%s'", remotename); + die(_("No such remote '%s'"), remotename); remote = remote_get(remotename); if (push_mode) { @@ -1469,7 +1484,7 @@ static int set_url(int argc, const char **argv) /* Old URL specified. Demand that one matches. */ if (regcomp(&old_regex, oldurl, REG_EXTENDED)) - die("Invalid old URL pattern: %s", oldurl); + die(_("Invalid old URL pattern: %s"), oldurl); for (i = 0; i < urlset_nr; i++) if (!regexec(&old_regex, urlset[i], 0, NULL, 0)) @@ -1477,9 +1492,9 @@ static int set_url(int argc, const char **argv) else negative_matches++; if (!delete_mode && !matches) - die("No such URL found: %s", oldurl); + die(_("No such URL found: %s"), oldurl); if (delete_mode && !negative_matches && !push_mode) - die("Will not delete all non-push URLs"); + die(_("Will not delete all non-push URLs")); regfree(&old_regex); @@ -1580,7 +1595,7 @@ int cmd_remote(int argc, const char **argv, const char *prefix) else if (!strcmp(argv[0], "update")) result = update(argc, argv); else { - error("Unknown subcommand: %s", argv[0]); + error(_("Unknown subcommand: %s"), argv[0]); usage_with_options(builtin_remote_usage, options); } diff --git a/builtin/update-index.c b/builtin/update-index.c index a6a23fa..5f038d6 100644 --- a/builtin/update-index.c +++ b/builtin/update-index.c @@ -708,6 +708,7 @@ int cmd_update_index(int argc, const char **argv, const char *prefix) int newfd, entries, has_errors = 0, line_termination = '\n'; int read_from_stdin = 0; int prefix_length = prefix ? strlen(prefix) : 0; + int preferred_index_format = 0; char set_executable_bit = 0; struct refresh_params refresh_args = {0, &has_errors}; int lock_error = 0; @@ -791,6 +792,8 @@ int cmd_update_index(int argc, const char **argv, const char *prefix) "(for porcelains) forget saved unresolved conflicts", PARSE_OPT_NOARG | PARSE_OPT_NONEG, resolve_undo_clear_callback}, + OPT_INTEGER(0, "index-version", &preferred_index_format, + "write index in this format"), OPT_END() }; @@ -851,6 +854,17 @@ int cmd_update_index(int argc, const char **argv, const char *prefix) } } argc = parse_options_end(&ctx); + if (preferred_index_format) { + if (preferred_index_format < INDEX_FORMAT_LB || + INDEX_FORMAT_UB < preferred_index_format) + die("index-version %d not in range: %d..%d", + preferred_index_format, + INDEX_FORMAT_LB, INDEX_FORMAT_UB); + + if (the_index.version != preferred_index_format) + active_cache_changed = 1; + the_index.version = preferred_index_format; + } if (read_from_stdin) { struct strbuf buf = STRBUF_INIT, nbuf = STRBUF_INIT; @@ -33,7 +33,7 @@ static int parse_bundle_header(int fd, struct bundle_header *header, if (strbuf_getwholeline_fd(&buf, fd, '\n') || strcmp(buf.buf, bundle_signature)) { if (report_path) - error("'%s' does not look like a v2 bundle file", + error(_("'%s' does not look like a v2 bundle file"), report_path); status = -1; goto abort; @@ -60,7 +60,7 @@ static int parse_bundle_header(int fd, struct bundle_header *header, (40 <= buf.len && !isspace(buf.buf[40])) || (!is_prereq && buf.len <= 40)) { if (report_path) - error("unrecognized header: %s%s (%d)", + error(_("unrecognized header: %s%s (%d)"), (is_prereq ? "-" : ""), buf.buf, (int)buf.len); status = -1; break; @@ -86,7 +86,7 @@ int read_bundle_header(const char *path, struct bundle_header *header) int fd = open(path, O_RDONLY); if (fd < 0) - return error("could not open '%s'", path); + return error(_("could not open '%s'"), path); return parse_bundle_header(fd, header, path); } @@ -137,7 +137,7 @@ int verify_bundle(struct bundle_header *header, int verbose) struct object_array refs; struct commit *commit; int i, ret = 0, req_nr; - const char *message = "Repository lacks these prerequisite commits:"; + const char *message = _("Repository lacks these prerequisite commits:"); init_revisions(&revs, NULL); for (i = 0; i < p->nr; i++) { @@ -161,7 +161,7 @@ int verify_bundle(struct bundle_header *header, int verbose) revs.leak_pending = 1; if (prepare_revision_walk(&revs)) - die("revision walk setup failed"); + die(_("revision walk setup failed")); i = req_nr; while (i && (commit = get_revision(&revs))) @@ -183,12 +183,16 @@ int verify_bundle(struct bundle_header *header, int verbose) struct ref_list *r; r = &header->references; - printf("The bundle contains %d ref%s\n", - r->nr, (1 < r->nr) ? "s" : ""); + printf_ln(Q_("The bundle contains %d ref", + "The bundle contains %d refs", + r->nr), + r->nr); list_refs(r, 0, NULL); r = &header->prerequisites; - printf("The bundle requires these %d ref%s\n", - r->nr, (1 < r->nr) ? "s" : ""); + printf_ln(Q_("The bundle requires this ref", + "The bundle requires these %d refs", + r->nr), + r->nr); list_refs(r, 0, NULL); } return ret; @@ -283,13 +287,13 @@ int create_bundle(struct bundle_header *header, const char *path, strbuf_release(&buf); fclose(rls_fout); if (finish_command(&rls)) - return error("rev-list died"); + return error(_("rev-list died")); /* write references */ argc = setup_revisions(argc, argv, &revs, NULL); if (argc > 1) - return error("unrecognized argument: %s", argv[1]); + return error(_("unrecognized argument: %s"), argv[1]); object_array_remove_duplicates(&revs.pending); @@ -324,7 +328,7 @@ int create_bundle(struct bundle_header *header, const char *path, * constraints. */ if (!(e->item->flags & SHOWN) && e->item->type == OBJ_COMMIT) { - warning("ref '%s' is excluded by the rev-list options", + warning(_("ref '%s' is excluded by the rev-list options"), e->name); free(ref); continue; @@ -369,7 +373,7 @@ int create_bundle(struct bundle_header *header, const char *path, free(ref); } if (!ref_count) - die ("Refusing to create empty bundle."); + die(_("Refusing to create empty bundle.")); /* end header */ write_or_die(bundle_fd, "\n", 1); @@ -387,7 +391,7 @@ int create_bundle(struct bundle_header *header, const char *path, rls.out = bundle_fd; rls.git_cmd = 1; if (start_command(&rls)) - return error("Could not spawn pack-objects"); + return error(_("Could not spawn pack-objects")); /* * start_command closed bundle_fd if it was > 1 @@ -405,10 +409,10 @@ int create_bundle(struct bundle_header *header, const char *path, } close(rls.in); if (finish_command(&rls)) - return error ("pack-objects died"); + return error(_("pack-objects died")); if (!bundle_to_stdout) { if (commit_lock_file(&lock)) - die_errno("cannot create '%s'", path); + die_errno(_("cannot create '%s'"), path); } return 0; } @@ -430,6 +434,6 @@ int unbundle(struct bundle_header *header, int bundle_fd, int flags) ip.no_stdout = 1; ip.git_cmd = 1; if (run_command(&ip)) - return error("index-pack died"); + return error(_("index-pack died")); return 0; } @@ -105,6 +105,9 @@ struct cache_header { unsigned int hdr_entries; }; +#define INDEX_FORMAT_LB 2 +#define INDEX_FORMAT_UB 4 + /* * The "cache_time" is just the low 32 bits of the * time. It doesn't matter if it overflows - we only @@ -115,48 +118,6 @@ struct cache_time { unsigned int nsec; }; -/* - * dev/ino/uid/gid/size are also just tracked to the low 32 bits - * Again - this is just a (very strong in practice) heuristic that - * the inode hasn't changed. - * - * We save the fields in big-endian order to allow using the - * index file over NFS transparently. - */ -struct ondisk_cache_entry { - struct cache_time ctime; - struct cache_time mtime; - unsigned int dev; - unsigned int ino; - unsigned int mode; - unsigned int uid; - unsigned int gid; - unsigned int size; - unsigned char sha1[20]; - unsigned short flags; - char name[FLEX_ARRAY]; /* more */ -}; - -/* - * This struct is used when CE_EXTENDED bit is 1 - * The struct must match ondisk_cache_entry exactly from - * ctime till flags - */ -struct ondisk_cache_entry_extended { - struct cache_time ctime; - struct cache_time mtime; - unsigned int dev; - unsigned int ino; - unsigned int mode; - unsigned int uid; - unsigned int gid; - unsigned int size; - unsigned char sha1[20]; - unsigned short flags; - unsigned short flags2; - char name[FLEX_ARRAY]; /* more */ -}; - struct cache_entry { struct cache_time ce_ctime; struct cache_time ce_mtime; @@ -253,9 +214,6 @@ static inline size_t ce_namelen(const struct cache_entry *ce) } #define ce_size(ce) cache_entry_size(ce_namelen(ce)) -#define ondisk_ce_size(ce) (((ce)->ce_flags & CE_EXTENDED) ? \ - ondisk_cache_entry_extended_size(ce_namelen(ce)) : \ - ondisk_cache_entry_size(ce_namelen(ce))) #define ce_stage(ce) ((CE_STAGEMASK & (ce)->ce_flags) >> CE_STAGESHIFT) #define ce_uptodate(ce) ((ce)->ce_flags & CE_UPTODATE) #define ce_skip_worktree(ce) ((ce)->ce_flags & CE_SKIP_WORKTREE) @@ -306,13 +264,11 @@ static inline unsigned int canon_mode(unsigned int mode) return S_IFGITLINK; } -#define flexible_size(STRUCT,len) ((offsetof(struct STRUCT,name) + (len) + 8) & ~7) #define cache_entry_size(len) (offsetof(struct cache_entry,name) + (len) + 1) -#define ondisk_cache_entry_size(len) flexible_size(ondisk_cache_entry,len) -#define ondisk_cache_entry_extended_size(len) flexible_size(ondisk_cache_entry_extended,len) struct index_state { struct cache_entry **cache; + unsigned int version; unsigned int cache_nr, cache_alloc, cache_changed; struct string_list *resolve_undo; struct cache_tree *cache_tree; @@ -624,6 +580,7 @@ enum rebase_setup_type { enum push_default_type { PUSH_DEFAULT_NOTHING = 0, PUSH_DEFAULT_MATCHING, + PUSH_DEFAULT_SIMPLE, PUSH_DEFAULT_UPSTREAM, PUSH_DEFAULT_CURRENT, PUSH_DEFAULT_UNSPECIFIED @@ -920,10 +877,8 @@ enum date_mode { }; const char *show_date(unsigned long time, int timezone, enum date_mode mode); -const char *show_date_relative(unsigned long time, int tz, - const struct timeval *now, - char *timebuf, - size_t timebuf_size); +void show_date_relative(unsigned long time, int tz, const struct timeval *now, + struct strbuf *timebuf); int parse_date(const char *date, char *buf, int bufsize); int parse_date_basic(const char *date, unsigned long *timestamp, int *offset); void datestamp(char *buf, int bufsize); @@ -835,6 +835,8 @@ static int git_default_push_config(const char *var, const char *value) push_default = PUSH_DEFAULT_NOTHING; else if (!strcmp(value, "matching")) push_default = PUSH_DEFAULT_MATCHING; + else if (!strcmp(value, "simple")) + push_default = PUSH_DEFAULT_SIMPLE; else if (!strcmp(value, "upstream")) push_default = PUSH_DEFAULT_UPSTREAM; else if (!strcmp(value, "tracking")) /* deprecated */ @@ -843,8 +845,8 @@ static int git_default_push_config(const char *var, const char *value) push_default = PUSH_DEFAULT_CURRENT; else { error("Malformed value for %s: %s", var, value); - return error("Must be one of nothing, matching, " - "tracking or current."); + return error("Must be one of nothing, matching, simple, " + "upstream or current."); } return 0; } diff --git a/contrib/rerere-train.sh b/contrib/rerere-train.sh index 2cfe1b9..36b6fee 100755 --- a/contrib/rerere-train.sh +++ b/contrib/rerere-train.sh @@ -7,7 +7,7 @@ USAGE="$me rev-list-args" SUBDIRECTORY_OK=Yes OPTIONS_SPEC= -. git-sh-setup +. $(git --exec-path)/git-sh-setup require_work_tree cd_to_toplevel @@ -86,83 +86,98 @@ static int local_tzoffset(unsigned long time) return offset * eastwest; } -const char *show_date_relative(unsigned long time, int tz, +void show_date_relative(unsigned long time, int tz, const struct timeval *now, - char *timebuf, - size_t timebuf_size) + struct strbuf *timebuf) { unsigned long diff; - if (now->tv_sec < time) - return "in the future"; + if (now->tv_sec < time) { + strbuf_addstr(timebuf, _("in the future")); + return; + } diff = now->tv_sec - time; if (diff < 90) { - snprintf(timebuf, timebuf_size, "%lu seconds ago", diff); - return timebuf; + strbuf_addf(timebuf, + Q_("%lu second ago", "%lu seconds ago", diff), diff); + return; } /* Turn it into minutes */ diff = (diff + 30) / 60; if (diff < 90) { - snprintf(timebuf, timebuf_size, "%lu minutes ago", diff); - return timebuf; + strbuf_addf(timebuf, + Q_("%lu minute ago", "%lu minutes ago", diff), diff); + return; } /* Turn it into hours */ diff = (diff + 30) / 60; if (diff < 36) { - snprintf(timebuf, timebuf_size, "%lu hours ago", diff); - return timebuf; + strbuf_addf(timebuf, + Q_("%lu hour ago", "%lu hours ago", diff), diff); + return; } /* We deal with number of days from here on */ diff = (diff + 12) / 24; if (diff < 14) { - snprintf(timebuf, timebuf_size, "%lu days ago", diff); - return timebuf; + strbuf_addf(timebuf, + Q_("%lu day ago", "%lu days ago", diff), diff); + return; } /* Say weeks for the past 10 weeks or so */ if (diff < 70) { - snprintf(timebuf, timebuf_size, "%lu weeks ago", (diff + 3) / 7); - return timebuf; + strbuf_addf(timebuf, + Q_("%lu week ago", "%lu weeks ago", (diff + 3) / 7), + (diff + 3) / 7); + return; } /* Say months for the past 12 months or so */ if (diff < 365) { - snprintf(timebuf, timebuf_size, "%lu months ago", (diff + 15) / 30); - return timebuf; + strbuf_addf(timebuf, + Q_("%lu month ago", "%lu months ago", (diff + 15) / 30), + (diff + 15) / 30); + return; } /* Give years and months for 5 years or so */ if (diff < 1825) { unsigned long totalmonths = (diff * 12 * 2 + 365) / (365 * 2); unsigned long years = totalmonths / 12; unsigned long months = totalmonths % 12; - int n; - n = snprintf(timebuf, timebuf_size, "%lu year%s", - years, (years > 1 ? "s" : "")); - if (months) - snprintf(timebuf + n, timebuf_size - n, - ", %lu month%s ago", - months, (months > 1 ? "s" : "")); - else - snprintf(timebuf + n, timebuf_size - n, " ago"); - return timebuf; + if (months) { + struct strbuf sb = STRBUF_INIT; + strbuf_addf(&sb, Q_("%lu year", "%lu years", years), years); + /* TRANSLATORS: "%s" is "<n> years" */ + strbuf_addf(timebuf, + Q_("%s, %lu month ago", "%s, %lu months ago", months), + sb.buf, months); + strbuf_release(&sb); + } else + strbuf_addf(timebuf, + Q_("%lu year ago", "%lu years ago", years), years); + return; } /* Otherwise, just years. Centuries is probably overkill. */ - snprintf(timebuf, timebuf_size, "%lu years ago", (diff + 183) / 365); - return timebuf; + strbuf_addf(timebuf, + Q_("%lu year ago", "%lu years ago", (diff + 183) / 365), + (diff + 183) / 365); } const char *show_date(unsigned long time, int tz, enum date_mode mode) { struct tm *tm; - static char timebuf[200]; + static struct strbuf timebuf = STRBUF_INIT; if (mode == DATE_RAW) { - snprintf(timebuf, sizeof(timebuf), "%lu %+05d", time, tz); - return timebuf; + strbuf_reset(&timebuf); + strbuf_addf(&timebuf, "%lu %+05d", time, tz); + return timebuf.buf; } if (mode == DATE_RELATIVE) { struct timeval now; + + strbuf_reset(&timebuf); gettimeofday(&now, NULL); - return show_date_relative(time, tz, &now, - timebuf, sizeof(timebuf)); + show_date_relative(time, tz, &now, &timebuf); + return timebuf.buf; } if (mode == DATE_LOCAL) @@ -171,23 +186,25 @@ const char *show_date(unsigned long time, int tz, enum date_mode mode) tm = time_to_tm(time, tz); if (!tm) return NULL; + + strbuf_reset(&timebuf); if (mode == DATE_SHORT) - sprintf(timebuf, "%04d-%02d-%02d", tm->tm_year + 1900, + strbuf_addf(&timebuf, "%04d-%02d-%02d", tm->tm_year + 1900, tm->tm_mon + 1, tm->tm_mday); else if (mode == DATE_ISO8601) - sprintf(timebuf, "%04d-%02d-%02d %02d:%02d:%02d %+05d", + strbuf_addf(&timebuf, "%04d-%02d-%02d %02d:%02d:%02d %+05d", tm->tm_year + 1900, tm->tm_mon + 1, tm->tm_mday, tm->tm_hour, tm->tm_min, tm->tm_sec, tz); else if (mode == DATE_RFC2822) - sprintf(timebuf, "%.3s, %d %.3s %d %02d:%02d:%02d %+05d", + strbuf_addf(&timebuf, "%.3s, %d %.3s %d %02d:%02d:%02d %+05d", weekday_names[tm->tm_wday], tm->tm_mday, month_names[tm->tm_mon], tm->tm_year + 1900, tm->tm_hour, tm->tm_min, tm->tm_sec, tz); else - sprintf(timebuf, "%.3s %.3s %d %02d:%02d:%02d %d%c%+05d", + strbuf_addf(&timebuf, "%.3s %.3s %d %02d:%02d:%02d %d%c%+05d", weekday_names[tm->tm_wday], month_names[tm->tm_mon], tm->tm_mday, @@ -195,7 +212,7 @@ const char *show_date(unsigned long time, int tz, enum date_mode mode) tm->tm_year + 1900, (mode == DATE_LOCAL) ? 0 : ' ', tz); - return timebuf; + return timebuf.buf; } /* @@ -1509,7 +1509,7 @@ static void show_stats(struct diffstat_t *data, struct diff_options *options) */ if (options->stat_width == -1) - width = term_columns(); + width = term_columns() - options->output_prefix_length; else width = options->stat_width ? options->stat_width : 80; @@ -1537,8 +1537,12 @@ static void show_stats(struct diffstat_t *data, struct diff_options *options) * Adjust adjustable widths not to exceed maximum width */ if (name_width + number_width + 6 + graph_width > width) { - if (graph_width > width * 3/8 - number_width - 6) + if (graph_width > width * 3/8 - number_width - 6) { graph_width = width * 3/8 - number_width - 6; + if (graph_width < 6) + graph_width = 6; + } + if (options->stat_graph_width && graph_width > options->stat_graph_width) graph_width = options->stat_graph_width; @@ -152,6 +152,7 @@ struct diff_options { diff_format_fn_t format_callback; void *format_callback_data; diff_prefix_fn_t output_prefix; + int output_prefix_length; void *output_prefix_data; }; diff --git a/generate-cmdlist.sh b/generate-cmdlist.sh index 1093ef4..9a4c9b9 100755 --- a/generate-cmdlist.sh +++ b/generate-cmdlist.sh @@ -16,7 +16,7 @@ do /^NAME/,/git-'"$cmd"'/H ${ x - s/.*git-'"$cmd"' - \(.*\)/ {"'"$cmd"'", "\1"},/ + s/.*git-'"$cmd"' - \(.*\)/ {"'"$cmd"'", N_("\1")},/ p }' "Documentation/git-$cmd.txt" done @@ -13,7 +13,7 @@ const char git_usage_string[] = " <command> [<args>]"; const char git_more_info_string[] = - "See 'git help <command>' for more information on a specific command."; + N_("See 'git help <command>' for more information on a specific command."); static struct startup_info git_startup_info; static int use_pager = -1; @@ -194,8 +194,10 @@ static struct strbuf *diff_output_prefix_callback(struct diff_options *opt, void struct git_graph *graph = data; static struct strbuf msgbuf = STRBUF_INIT; + assert(opt); assert(graph); + opt->output_prefix_length = graph->width; strbuf_reset(&msgbuf); graph_padding_line(graph, &msgbuf); return &msgbuf; @@ -245,6 +247,7 @@ struct git_graph *graph_init(struct rev_info *opt) */ opt->diffopt.output_prefix = diff_output_prefix_callback; opt->diffopt.output_prefix_data = graph; + opt->diffopt.output_prefix_length = 0; return graph; } @@ -203,8 +203,7 @@ void load_command_list(const char *prefix, exclude_cmds(other_cmds, main_cmds); } -void list_commands(const char *title, struct cmdnames *main_cmds, - struct cmdnames *other_cmds) +void list_commands(struct cmdnames *main_cmds, struct cmdnames *other_cmds) { int i, longest = 0; @@ -217,18 +216,14 @@ void list_commands(const char *title, struct cmdnames *main_cmds, if (main_cmds->cnt) { const char *exec_path = git_exec_path(); - printf("available %s in '%s'\n", title, exec_path); - printf("----------------"); - mput_char('-', strlen(title) + strlen(exec_path)); + printf_ln(_("available git commands in '%s'"), exec_path); putchar('\n'); pretty_print_string_list(main_cmds, longest); putchar('\n'); } if (other_cmds->cnt) { - printf("%s available from elsewhere on your $PATH\n", title); - printf("---------------------------------------"); - mput_char('-', strlen(title)); + printf_ln(_("git commands available from elsewhere on your $PATH")); putchar('\n'); pretty_print_string_list(other_cmds, longest); putchar('\n'); @@ -341,7 +336,7 @@ const char *help_unknown_cmd(const char *cmd) sizeof(*main_cmds.names), levenshtein_compare); if (!main_cmds.cnt) - die ("Uh oh. Your system reports no Git commands at all."); + die(_("Uh oh. Your system reports no Git commands at all.")); /* skip and count prefix matches */ for (n = 0; n < main_cmds.cnt && !main_cmds.names[n]->len; n++) @@ -362,23 +357,26 @@ const char *help_unknown_cmd(const char *cmd) const char *assumed = main_cmds.names[0]->name; main_cmds.names[0] = NULL; clean_cmdnames(&main_cmds); - fprintf(stderr, "WARNING: You called a Git command named '%s', " - "which does not exist.\n" - "Continuing under the assumption that you meant '%s'\n", + fprintf_ln(stderr, + _("WARNING: You called a Git command named '%s', " + "which does not exist.\n" + "Continuing under the assumption that you meant '%s'"), cmd, assumed); if (autocorrect > 0) { - fprintf(stderr, "in %0.1f seconds automatically...\n", + fprintf_ln(stderr, _("in %0.1f seconds automatically..."), (float)autocorrect/10.0); poll(NULL, 0, autocorrect * 100); } return assumed; } - fprintf(stderr, "git: '%s' is not a git command. See 'git --help'.\n", cmd); + fprintf_ln(stderr, _("git: '%s' is not a git command. See 'git --help'."), cmd); if (SIMILAR_ENOUGH(best_similarity)) { - fprintf(stderr, "\nDid you mean %s?\n", - n < 2 ? "this": "one of these"); + fprintf_ln(stderr, + Q_("\nDid you mean this?", + "\nDid you mean one of these?", + n)); for (i = 0; i < n; i++) fprintf(stderr, "\t%s\n", main_cmds.names[i]->name); @@ -25,8 +25,7 @@ extern void add_cmdname(struct cmdnames *cmds, const char *name, int len); /* Here we require that excludes is a sorted list. */ extern void exclude_cmds(struct cmdnames *cmds, struct cmdnames *excludes); extern int is_in_cmdlist(struct cmdnames *cmds, const char *name); -extern void list_commands(const char *title, - struct cmdnames *main_cmds, +extern void list_commands(struct cmdnames *main_cmds, struct cmdnames *other_cmds); #endif /* HELP_H */ @@ -1,6 +1,14 @@ Core Git translation language teams (please keep the list sorted alphabetically on language field) +Language: da (Danish) +Repository: https://github.com/git-da/git-po/ +Leader: Byrial Jensen <byrial@vip.cybercity.dk> + +Language: de (German) +Repository: https://github.com/ralfth/git-po-de +Leader: Ralf Thielow <ralf.thielow@googlemail.com> + Language: is (Icelandic) Leader: Ævar Arnfjörð Bjarmason <avarab@gmail.com> diff --git a/po/da.po b/po/da.po new file mode 100644 index 0000000..20a88ea --- /dev/null +++ b/po/da.po @@ -0,0 +1,3503 @@ +# Danish translations for Git. +# This file is distributed under the same license as the PACKAGE package. +# Byrial Jensen <byrial@vip.cybercity.dk>, 2012. +# +msgid "" +msgstr "" +"Project-Id-Version: Git\n" +"Report-Msgid-Bugs-To: Git Mailing List <git@vger.kernel.org>\n" +"POT-Creation-Date: 2012-03-16 20:18+0800\n" +"PO-Revision-Date: 2012-04-10 18:41+0200\n" +"Last-Translator: Byrial Jensen <byrial@vip.cybercity.dk>\n" +"Language-Team: Danish <dansk@dansk-gruppen.dk>\n" +"Language: da\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=2; plural=(n != 1);\n" + +#: advice.c:34 +#, c-format +msgid "hint: %.*s\n" +msgstr "" + +#. +#. * Message used both when 'git commit' fails and when +#. * other commands doing a merge do. +#. +#: advice.c:64 +msgid "" +"Fix them up in the work tree,\n" +"and then use 'git add/rm <file>' as\n" +"appropriate to mark resolution and make a commit,\n" +"or use 'git commit -a'." +msgstr "" + +#: commit.c:47 +#, c-format +msgid "could not parse %s" +msgstr "" + +#: commit.c:49 +#, c-format +msgid "%s %s is not a commit!" +msgstr "" + +#: compat/obstack.c:406 compat/obstack.c:408 +msgid "memory exhausted" +msgstr "" + +#: connected.c:39 +msgid "Could not run 'git rev-list'" +msgstr "" + +#: connected.c:48 +#, c-format +msgid "failed write to rev-list: %s" +msgstr "" + +#: connected.c:56 +#, c-format +msgid "failed to close rev-list's stdin: %s" +msgstr "" + +#: diff.c:105 +#, c-format +msgid " Failed to parse dirstat cut-off percentage '%.*s'\n" +msgstr "" + +#: diff.c:110 +#, c-format +msgid " Unknown dirstat parameter '%.*s'\n" +msgstr "" + +#: diff.c:210 +#, c-format +msgid "" +"Found errors in 'diff.dirstat' config variable:\n" +"%s" +msgstr "" + +#: diff.c:1336 +msgid " 0 files changed\n" +msgstr "" + +#: diff.c:1340 +#, c-format +msgid " %d file changed" +msgid_plural " %d files changed" +msgstr[0] "" +msgstr[1] "" + +#: diff.c:1357 +#, c-format +msgid ", %d insertion(+)" +msgid_plural ", %d insertions(+)" +msgstr[0] "" +msgstr[1] "" + +#: diff.c:1368 +#, c-format +msgid ", %d deletion(-)" +msgid_plural ", %d deletions(-)" +msgstr[0] "" +msgstr[1] "" + +#: diff.c:3424 +#, c-format +msgid "" +"Failed to parse --dirstat/-X option parameter:\n" +"%s" +msgstr "" + +#: gpg-interface.c:59 +msgid "could not run gpg." +msgstr "" + +#: gpg-interface.c:71 +msgid "gpg did not accept the data" +msgstr "" + +#: gpg-interface.c:82 +msgid "gpg failed to sign the data" +msgstr "" + +#: grep.c:1280 +#, c-format +msgid "'%s': unable to read %s" +msgstr "" + +#: grep.c:1297 +#, c-format +msgid "'%s': %s" +msgstr "" + +#: grep.c:1308 +#, c-format +msgid "'%s': short read %s" +msgstr "" + +#: help.c:287 +#, c-format +msgid "" +"'%s' appears to be a git command, but we were not\n" +"able to execute it. Maybe git-%s is broken?" +msgstr "" + +#: remote.c:1607 +#, c-format +msgid "Your branch is ahead of '%s' by %d commit.\n" +msgid_plural "Your branch is ahead of '%s' by %d commits.\n" +msgstr[0] "" +msgstr[1] "" + +#: remote.c:1613 +#, c-format +msgid "Your branch is behind '%s' by %d commit, and can be fast-forwarded.\n" +msgid_plural "" +"Your branch is behind '%s' by %d commits, and can be fast-forwarded.\n" +msgstr[0] "" +msgstr[1] "" + +#: remote.c:1621 +#, c-format +msgid "" +"Your branch and '%s' have diverged,\n" +"and have %d and %d different commit each, respectively.\n" +msgid_plural "" +"Your branch and '%s' have diverged,\n" +"and have %d and %d different commits each, respectively.\n" +msgstr[0] "" +msgstr[1] "" + +#: sequencer.c:120 builtin/merge.c:864 builtin/merge.c:985 +#: builtin/merge.c:1095 builtin/merge.c:1105 +#, c-format +msgid "Could not open '%s' for writing" +msgstr "" + +#: sequencer.c:122 builtin/merge.c:334 builtin/merge.c:867 +#: builtin/merge.c:1097 builtin/merge.c:1110 +#, c-format +msgid "Could not write to '%s'" +msgstr "" + +#: sequencer.c:143 +msgid "" +"after resolving the conflicts, mark the corrected paths\n" +"with 'git add <paths>' or 'git rm <paths>'" +msgstr "" + +#: sequencer.c:146 +msgid "" +"after resolving the conflicts, mark the corrected paths\n" +"with 'git add <paths>' or 'git rm <paths>'\n" +"and commit the result with 'git commit'" +msgstr "" + +#: sequencer.c:159 sequencer.c:685 sequencer.c:768 +#, c-format +msgid "Could not write to %s" +msgstr "" + +#: sequencer.c:162 +#, c-format +msgid "Error wrapping up %s" +msgstr "" + +#: sequencer.c:177 +msgid "Your local changes would be overwritten by cherry-pick." +msgstr "" + +#: sequencer.c:179 +msgid "Your local changes would be overwritten by revert." +msgstr "" + +#: sequencer.c:182 +msgid "Commit your changes or stash them to proceed." +msgstr "" + +#. TRANSLATORS: %s will be "revert" or "cherry-pick" +#: sequencer.c:232 +#, c-format +msgid "%s: Unable to write new index file" +msgstr "" + +#: sequencer.c:298 +msgid "Your index file is unmerged." +msgstr "" + +#: sequencer.c:301 +msgid "You do not have a valid HEAD" +msgstr "" + +#: sequencer.c:316 +#, c-format +msgid "Commit %s is a merge but no -m option was given." +msgstr "" + +#: sequencer.c:324 +#, c-format +msgid "Commit %s does not have parent %d" +msgstr "" + +#: sequencer.c:328 +#, c-format +msgid "Mainline was specified but commit %s is not a merge." +msgstr "" + +#. TRANSLATORS: The first %s will be "revert" or +#. "cherry-pick", the second %s a SHA1 +#: sequencer.c:339 +#, c-format +msgid "%s: cannot parse parent commit %s" +msgstr "" + +#: sequencer.c:343 +#, c-format +msgid "Cannot get commit message for %s" +msgstr "" + +#: sequencer.c:427 +#, c-format +msgid "could not revert %s... %s" +msgstr "" + +#: sequencer.c:428 +#, c-format +msgid "could not apply %s... %s" +msgstr "" + +#: sequencer.c:450 sequencer.c:909 builtin/log.c:288 builtin/log.c:713 +#: builtin/log.c:1329 builtin/log.c:1548 builtin/merge.c:348 +#: builtin/shortlog.c:181 +msgid "revision walk setup failed" +msgstr "" + +#: sequencer.c:453 +msgid "empty commit set passed" +msgstr "" + +#: sequencer.c:461 +#, c-format +msgid "git %s: failed to read the index" +msgstr "" + +#: sequencer.c:466 +#, c-format +msgid "git %s: failed to refresh the index" +msgstr "" + +#: sequencer.c:551 +#, c-format +msgid "Cannot %s during a %s" +msgstr "" + +#: sequencer.c:573 +#, c-format +msgid "Could not parse line %d." +msgstr "" + +#: sequencer.c:578 +msgid "No commits parsed." +msgstr "" + +#: sequencer.c:591 +#, c-format +msgid "Could not open %s" +msgstr "" + +#: sequencer.c:595 +#, c-format +msgid "Could not read %s." +msgstr "" + +#: sequencer.c:602 +#, c-format +msgid "Unusable instruction sheet: %s" +msgstr "" + +#: sequencer.c:630 +#, c-format +msgid "Invalid key: %s" +msgstr "" + +#: sequencer.c:633 +#, c-format +msgid "Invalid value for %s: %s" +msgstr "" + +#: sequencer.c:645 +#, c-format +msgid "Malformed options sheet: %s" +msgstr "" + +#: sequencer.c:666 +msgid "a cherry-pick or revert is already in progress" +msgstr "" + +#: sequencer.c:667 +msgid "try \"git cherry-pick (--continue | --quit | --abort)\"" +msgstr "" + +#: sequencer.c:671 +#, c-format +msgid "Could not create sequencer directory %s" +msgstr "" + +#: sequencer.c:687 sequencer.c:772 +#, c-format +msgid "Error wrapping up %s." +msgstr "" + +#: sequencer.c:706 sequencer.c:840 +msgid "no cherry-pick or revert in progress" +msgstr "" + +#: sequencer.c:708 +msgid "cannot resolve HEAD" +msgstr "" + +#: sequencer.c:710 +msgid "cannot abort from a branch yet to be born" +msgstr "" + +#: sequencer.c:732 +#, c-format +msgid "cannot open %s: %s" +msgstr "" + +#: sequencer.c:735 +#, c-format +msgid "cannot read %s: %s" +msgstr "" + +#: sequencer.c:736 +msgid "unexpected end of file" +msgstr "" + +#: sequencer.c:742 +#, c-format +msgid "stored pre-cherry-pick HEAD file '%s' is corrupt" +msgstr "" + +#: sequencer.c:765 +#, c-format +msgid "Could not format %s." +msgstr "" + +#: sequencer.c:927 +msgid "Can't revert as initial commit" +msgstr "" + +#: sequencer.c:928 +msgid "Can't cherry-pick into empty head" +msgstr "" + +#: wt-status.c:134 +msgid "Unmerged paths:" +msgstr "" + +#: wt-status.c:140 wt-status.c:157 +#, c-format +msgid " (use \"git reset %s <file>...\" to unstage)" +msgstr "" + +#: wt-status.c:142 wt-status.c:159 +msgid " (use \"git rm --cached <file>...\" to unstage)" +msgstr "" + +#: wt-status.c:143 +msgid " (use \"git add/rm <file>...\" as appropriate to mark resolution)" +msgstr "" + +#: wt-status.c:151 +msgid "Changes to be committed:" +msgstr "" + +#: wt-status.c:169 +msgid "Changes not staged for commit:" +msgstr "" + +#: wt-status.c:173 +msgid " (use \"git add <file>...\" to update what will be committed)" +msgstr "" + +#: wt-status.c:175 +msgid " (use \"git add/rm <file>...\" to update what will be committed)" +msgstr "" + +#: wt-status.c:176 +msgid "" +" (use \"git checkout -- <file>...\" to discard changes in working directory)" +msgstr "" + +#: wt-status.c:178 +msgid " (commit or discard the untracked or modified content in submodules)" +msgstr "" + +#: wt-status.c:187 +#, c-format +msgid "%s files:" +msgstr "" + +#: wt-status.c:190 +#, c-format +msgid " (use \"git %s <file>...\" to include in what will be committed)" +msgstr "" + +#: wt-status.c:207 +msgid "bug" +msgstr "" + +#: wt-status.c:212 +msgid "both deleted:" +msgstr "" + +#: wt-status.c:213 +msgid "added by us:" +msgstr "" + +#: wt-status.c:214 +msgid "deleted by them:" +msgstr "" + +#: wt-status.c:215 +msgid "added by them:" +msgstr "" + +#: wt-status.c:216 +msgid "deleted by us:" +msgstr "" + +#: wt-status.c:217 +msgid "both added:" +msgstr "" + +#: wt-status.c:218 +msgid "both modified:" +msgstr "" + +#: wt-status.c:248 +msgid "new commits, " +msgstr "" + +#: wt-status.c:250 +msgid "modified content, " +msgstr "" + +#: wt-status.c:252 +msgid "untracked content, " +msgstr "" + +#: wt-status.c:266 +#, c-format +msgid "new file: %s" +msgstr "" + +#: wt-status.c:269 +#, c-format +msgid "copied: %s -> %s" +msgstr "" + +#: wt-status.c:272 +#, c-format +msgid "deleted: %s" +msgstr "" + +#: wt-status.c:275 +#, c-format +msgid "modified: %s" +msgstr "" + +#: wt-status.c:278 +#, c-format +msgid "renamed: %s -> %s" +msgstr "" + +#: wt-status.c:281 +#, c-format +msgid "typechange: %s" +msgstr "" + +#: wt-status.c:284 +#, c-format +msgid "unknown: %s" +msgstr "" + +#: wt-status.c:287 +#, c-format +msgid "unmerged: %s" +msgstr "" + +#: wt-status.c:290 +#, c-format +msgid "bug: unhandled diff status %c" +msgstr "" + +#: wt-status.c:713 +msgid "On branch " +msgstr "" + +#: wt-status.c:720 +msgid "Not currently on any branch." +msgstr "" + +#: wt-status.c:731 +msgid "Initial commit" +msgstr "" + +#: wt-status.c:745 +msgid "Untracked" +msgstr "" + +#: wt-status.c:747 +msgid "Ignored" +msgstr "" + +#: wt-status.c:749 +#, c-format +msgid "Untracked files not listed%s" +msgstr "" + +#: wt-status.c:751 +msgid " (use -u option to show untracked files)" +msgstr "" + +#: wt-status.c:757 +msgid "No changes" +msgstr "" + +#: wt-status.c:761 +#, c-format +msgid "no changes added to commit%s\n" +msgstr "" + +#: wt-status.c:763 +msgid " (use \"git add\" and/or \"git commit -a\")" +msgstr "" + +#: wt-status.c:765 +#, c-format +msgid "nothing added to commit but untracked files present%s\n" +msgstr "" + +#: wt-status.c:767 +msgid " (use \"git add\" to track)" +msgstr "" + +#: wt-status.c:769 wt-status.c:772 wt-status.c:775 +#, c-format +msgid "nothing to commit%s\n" +msgstr "" + +#: wt-status.c:770 +msgid " (create/copy files and use \"git add\" to track)" +msgstr "" + +#: wt-status.c:773 +msgid " (use -u to show untracked files)" +msgstr "" + +#: wt-status.c:776 +msgid " (working directory clean)" +msgstr "" + +#: wt-status.c:884 +msgid "HEAD (no branch)" +msgstr "" + +#: wt-status.c:890 +msgid "Initial commit on " +msgstr "" + +#: wt-status.c:905 +msgid "behind " +msgstr "" + +#: wt-status.c:908 wt-status.c:911 +msgid "ahead " +msgstr "" + +#: wt-status.c:913 +msgid ", behind " +msgstr "" + +#: builtin/add.c:62 +#, c-format +msgid "unexpected diff status %c" +msgstr "" + +#: builtin/add.c:67 builtin/commit.c:298 +msgid "updating files failed" +msgstr "" + +#: builtin/add.c:77 +#, c-format +msgid "remove '%s'\n" +msgstr "" + +#: builtin/add.c:176 +#, c-format +msgid "Path '%s' is in submodule '%.*s'" +msgstr "" + +#: builtin/add.c:192 +msgid "Unstaged changes after refreshing the index:" +msgstr "" + +#: builtin/add.c:195 builtin/add.c:456 builtin/rm.c:186 +#, c-format +msgid "pathspec '%s' did not match any files" +msgstr "" + +#: builtin/add.c:209 +#, c-format +msgid "'%s' is beyond a symbolic link" +msgstr "" + +#: builtin/add.c:276 +msgid "Could not read the index" +msgstr "" + +#: builtin/add.c:286 +#, c-format +msgid "Could not open '%s' for writing." +msgstr "" + +#: builtin/add.c:290 +msgid "Could not write patch" +msgstr "" + +#: builtin/add.c:295 +#, c-format +msgid "Could not stat '%s'" +msgstr "" + +#: builtin/add.c:297 +msgid "Empty patch. Aborted." +msgstr "" + +#: builtin/add.c:303 +#, c-format +msgid "Could not apply '%s'" +msgstr "" + +#: builtin/add.c:312 +msgid "The following paths are ignored by one of your .gitignore files:\n" +msgstr "" + +#: builtin/add.c:352 +#, c-format +msgid "Use -f if you really want to add them.\n" +msgstr "" + +#: builtin/add.c:353 +msgid "no files added" +msgstr "" + +#: builtin/add.c:359 +msgid "adding files failed" +msgstr "" + +#: builtin/add.c:391 +msgid "-A and -u are mutually incompatible" +msgstr "" + +#: builtin/add.c:393 +msgid "Option --ignore-missing can only be used together with --dry-run" +msgstr "" + +#: builtin/add.c:413 +#, c-format +msgid "Nothing specified, nothing added.\n" +msgstr "" + +#: builtin/add.c:414 +#, c-format +msgid "Maybe you wanted to say 'git add .'?\n" +msgstr "" + +#: builtin/add.c:420 builtin/clean.c:95 builtin/commit.c:358 builtin/mv.c:82 +#: builtin/rm.c:162 +msgid "index file corrupt" +msgstr "" + +#: builtin/add.c:476 builtin/mv.c:229 builtin/rm.c:260 +msgid "Unable to write new index file" +msgstr "" + +#: builtin/archive.c:17 +#, c-format +msgid "could not create archive file '%s'" +msgstr "" + +#: builtin/archive.c:20 +msgid "could not redirect output" +msgstr "" + +#: builtin/archive.c:37 +msgid "git archive: Remote with no URL" +msgstr "" + +#: builtin/archive.c:58 +msgid "git archive: expected ACK/NAK, got EOF" +msgstr "" + +#: builtin/archive.c:63 +#, c-format +msgid "git archive: NACK %s" +msgstr "" + +#: builtin/archive.c:65 +#, c-format +msgid "remote error: %s" +msgstr "" + +#: builtin/archive.c:66 +msgid "git archive: protocol error" +msgstr "" + +#: builtin/archive.c:71 +msgid "git archive: expected a flush" +msgstr "" + +#: builtin/branch.c:137 +#, c-format +msgid "" +"deleting branch '%s' that has been merged to\n" +" '%s', but not yet merged to HEAD." +msgstr "" + +#: builtin/branch.c:141 +#, c-format +msgid "" +"not deleting branch '%s' that is not yet merged to\n" +" '%s', even though it is merged to HEAD." +msgstr "" + +#. TRANSLATORS: This is "remote " in "remote branch '%s' not found" +#: builtin/branch.c:163 +msgid "remote " +msgstr "" + +#: builtin/branch.c:171 +msgid "cannot use -a with -d" +msgstr "" + +#: builtin/branch.c:177 +msgid "Couldn't look up commit object for HEAD" +msgstr "" + +#: builtin/branch.c:182 +#, c-format +msgid "Cannot delete the branch '%s' which you are currently on." +msgstr "" + +#: builtin/branch.c:192 +#, c-format +msgid "%sbranch '%s' not found." +msgstr "" + +#: builtin/branch.c:200 +#, c-format +msgid "Couldn't look up commit object for '%s'" +msgstr "" + +#: builtin/branch.c:206 +#, c-format +msgid "" +"The branch '%s' is not fully merged.\n" +"If you are sure you want to delete it, run 'git branch -D %s'." +msgstr "" + +#: builtin/branch.c:214 +#, c-format +msgid "Error deleting %sbranch '%s'" +msgstr "" + +#: builtin/branch.c:219 +#, c-format +msgid "Deleted %sbranch %s (was %s).\n" +msgstr "" + +#: builtin/branch.c:224 +msgid "Update of config-file failed" +msgstr "" + +#: builtin/branch.c:322 +#, c-format +msgid "branch '%s' does not point at a commit" +msgstr "" + +#: builtin/branch.c:394 +#, c-format +msgid "behind %d] " +msgstr "" + +#: builtin/branch.c:396 +#, c-format +msgid "ahead %d] " +msgstr "" + +#: builtin/branch.c:398 +#, c-format +msgid "ahead %d, behind %d] " +msgstr "" + +#: builtin/branch.c:501 +msgid "(no branch)" +msgstr "" + +#: builtin/branch.c:566 +msgid "some refs could not be read" +msgstr "" + +#: builtin/branch.c:579 +msgid "cannot rename the current branch while not on any." +msgstr "" + +#: builtin/branch.c:589 +#, c-format +msgid "Invalid branch name: '%s'" +msgstr "" + +#: builtin/branch.c:604 +msgid "Branch rename failed" +msgstr "" + +#: builtin/branch.c:608 +#, c-format +msgid "Renamed a misnamed branch '%s' away" +msgstr "" + +#: builtin/branch.c:612 +#, c-format +msgid "Branch renamed to %s, but HEAD is not updated!" +msgstr "" + +#: builtin/branch.c:619 +msgid "Branch is renamed, but update of config-file failed" +msgstr "" + +#: builtin/branch.c:634 +#, c-format +msgid "malformed object name %s" +msgstr "" + +#: builtin/branch.c:658 +#, c-format +msgid "could not write branch description template: %s\n" +msgstr "" + +#: builtin/branch.c:746 +msgid "Failed to resolve HEAD as a valid ref." +msgstr "" + +#: builtin/branch.c:751 builtin/clone.c:558 +msgid "HEAD not found below refs/heads!" +msgstr "" + +#: builtin/branch.c:809 +msgid "-a and -r options to 'git branch' do not make sense with a branch name" +msgstr "" + +#: builtin/bundle.c:47 +#, c-format +msgid "%s is okay\n" +msgstr "" + +#: builtin/bundle.c:56 +msgid "Need a repository to create a bundle." +msgstr "" + +#: builtin/bundle.c:60 +msgid "Need a repository to unbundle." +msgstr "" + +#: builtin/checkout.c:113 builtin/checkout.c:146 +#, c-format +msgid "path '%s' does not have our version" +msgstr "" + +#: builtin/checkout.c:115 builtin/checkout.c:148 +#, c-format +msgid "path '%s' does not have their version" +msgstr "" + +#: builtin/checkout.c:131 +#, c-format +msgid "path '%s' does not have all necessary versions" +msgstr "" + +#: builtin/checkout.c:175 +#, c-format +msgid "path '%s' does not have necessary versions" +msgstr "" + +#: builtin/checkout.c:192 +#, c-format +msgid "path '%s': cannot merge" +msgstr "" + +#: builtin/checkout.c:209 +#, c-format +msgid "Unable to add merge result for '%s'" +msgstr "" + +#: builtin/checkout.c:212 builtin/reset.c:158 +#, c-format +msgid "make_cache_entry failed for path '%s'" +msgstr "" + +#: builtin/checkout.c:234 builtin/checkout.c:392 +msgid "corrupt index file" +msgstr "" + +#: builtin/checkout.c:264 builtin/checkout.c:271 +#, c-format +msgid "path '%s' is unmerged" +msgstr "" + +#: builtin/checkout.c:302 builtin/checkout.c:498 builtin/clone.c:583 +#: builtin/merge.c:811 +msgid "unable to write new index file" +msgstr "" + +#: builtin/checkout.c:319 builtin/diff.c:302 builtin/merge.c:408 +msgid "diff_setup_done failed" +msgstr "" + +#: builtin/checkout.c:414 +msgid "you need to resolve your current index first" +msgstr "" + +#: builtin/checkout.c:533 +#, c-format +msgid "Can not do reflog for '%s'\n" +msgstr "" + +#: builtin/checkout.c:565 +msgid "HEAD is now at" +msgstr "" + +#: builtin/checkout.c:572 +#, c-format +msgid "Reset branch '%s'\n" +msgstr "" + +#: builtin/checkout.c:575 +#, c-format +msgid "Already on '%s'\n" +msgstr "" + +#: builtin/checkout.c:579 +#, c-format +msgid "Switched to and reset branch '%s'\n" +msgstr "" + +#: builtin/checkout.c:581 +#, c-format +msgid "Switched to a new branch '%s'\n" +msgstr "" + +#: builtin/checkout.c:583 +#, c-format +msgid "Switched to branch '%s'\n" +msgstr "" + +#: builtin/checkout.c:639 +#, c-format +msgid " ... and %d more.\n" +msgstr "" + +#. The singular version +#: builtin/checkout.c:645 +#, c-format +msgid "" +"Warning: you are leaving %d commit behind, not connected to\n" +"any of your branches:\n" +"\n" +"%s\n" +msgid_plural "" +"Warning: you are leaving %d commits behind, not connected to\n" +"any of your branches:\n" +"\n" +"%s\n" +msgstr[0] "" +msgstr[1] "" + +#: builtin/checkout.c:663 +#, c-format +msgid "" +"If you want to keep them by creating a new branch, this may be a good time\n" +"to do so with:\n" +"\n" +" git branch new_branch_name %s\n" +"\n" +msgstr "" + +#: builtin/checkout.c:692 +msgid "internal error in revision walk" +msgstr "" + +#: builtin/checkout.c:696 +msgid "Previous HEAD position was" +msgstr "" + +#: builtin/checkout.c:722 +msgid "You are on a branch yet to be born" +msgstr "" + +#. case (1) +#: builtin/checkout.c:853 +#, c-format +msgid "invalid reference: %s" +msgstr "" + +#. case (1): want a tree +#: builtin/checkout.c:892 +#, c-format +msgid "reference is not a tree: %s" +msgstr "" + +#: builtin/checkout.c:972 +msgid "-B cannot be used with -b" +msgstr "" + +#: builtin/checkout.c:981 +msgid "--patch is incompatible with all other options" +msgstr "" + +#: builtin/checkout.c:984 +msgid "--detach cannot be used with -b/-B/--orphan" +msgstr "" + +#: builtin/checkout.c:986 +msgid "--detach cannot be used with -t" +msgstr "" + +#: builtin/checkout.c:992 +msgid "--track needs a branch name" +msgstr "" + +#: builtin/checkout.c:999 +msgid "Missing branch name; try -b" +msgstr "" + +#: builtin/checkout.c:1005 +msgid "--orphan and -b|-B are mutually exclusive" +msgstr "" + +#: builtin/checkout.c:1007 +msgid "--orphan cannot be used with -t" +msgstr "" + +#: builtin/checkout.c:1017 +msgid "git checkout: -f and -m are incompatible" +msgstr "" + +#: builtin/checkout.c:1051 +msgid "invalid path specification" +msgstr "" + +#: builtin/checkout.c:1059 +#, c-format +msgid "" +"git checkout: updating paths is incompatible with switching branches.\n" +"Did you intend to checkout '%s' which can not be resolved as commit?" +msgstr "" + +#: builtin/checkout.c:1061 +msgid "git checkout: updating paths is incompatible with switching branches." +msgstr "" + +#: builtin/checkout.c:1066 +msgid "git checkout: --detach does not take a path argument" +msgstr "" + +#: builtin/checkout.c:1069 +msgid "" +"git checkout: --ours/--theirs, --force and --merge are incompatible when\n" +"checking out of the index." +msgstr "" + +#: builtin/checkout.c:1088 +msgid "Cannot switch branch to a non-commit." +msgstr "" + +#: builtin/checkout.c:1091 +msgid "--ours/--theirs is incompatible with switching branches." +msgstr "" + +#: builtin/clean.c:78 +msgid "-x and -X cannot be used together" +msgstr "" + +#: builtin/clean.c:82 +msgid "" +"clean.requireForce set to true and neither -n nor -f given; refusing to clean" +msgstr "" + +#: builtin/clean.c:85 +msgid "" +"clean.requireForce defaults to true and neither -n nor -f given; refusing to " +"clean" +msgstr "" + +#: builtin/clean.c:155 builtin/clean.c:176 +#, c-format +msgid "Would remove %s\n" +msgstr "" + +#: builtin/clean.c:159 builtin/clean.c:179 +#, c-format +msgid "Removing %s\n" +msgstr "" + +#: builtin/clean.c:162 builtin/clean.c:182 +#, c-format +msgid "failed to remove %s" +msgstr "" + +#: builtin/clean.c:166 +#, c-format +msgid "Would not remove %s\n" +msgstr "" + +#: builtin/clean.c:168 +#, c-format +msgid "Not removing %s\n" +msgstr "" + +#: builtin/clone.c:243 +#, c-format +msgid "reference repository '%s' is not a local directory." +msgstr "" + +#: builtin/clone.c:302 +#, c-format +msgid "failed to open '%s'" +msgstr "" + +#: builtin/clone.c:306 +#, c-format +msgid "failed to create directory '%s'" +msgstr "" + +#: builtin/clone.c:308 builtin/diff.c:75 +#, c-format +msgid "failed to stat '%s'" +msgstr "" + +#: builtin/clone.c:310 +#, c-format +msgid "%s exists and is not a directory" +msgstr "" + +#: builtin/clone.c:324 +#, c-format +msgid "failed to stat %s\n" +msgstr "" + +#: builtin/clone.c:341 +#, c-format +msgid "failed to unlink '%s'" +msgstr "" + +#: builtin/clone.c:346 +#, c-format +msgid "failed to create link '%s'" +msgstr "" + +#: builtin/clone.c:350 +#, c-format +msgid "failed to copy file to '%s'" +msgstr "" + +#: builtin/clone.c:373 +#, c-format +msgid "done.\n" +msgstr "" + +#: builtin/clone.c:440 +#, c-format +msgid "Could not find remote branch %s to clone." +msgstr "" + +#: builtin/clone.c:549 +msgid "remote HEAD refers to nonexistent ref, unable to checkout.\n" +msgstr "" + +#: builtin/clone.c:639 +msgid "Too many arguments." +msgstr "" + +#: builtin/clone.c:643 +msgid "You must specify a repository to clone." +msgstr "" + +#: builtin/clone.c:654 +#, c-format +msgid "--bare and --origin %s options are incompatible." +msgstr "" + +#: builtin/clone.c:668 +#, c-format +msgid "repository '%s' does not exist" +msgstr "" + +#: builtin/clone.c:673 +msgid "--depth is ignored in local clones; use file:// instead." +msgstr "" + +#: builtin/clone.c:683 +#, c-format +msgid "destination path '%s' already exists and is not an empty directory." +msgstr "" + +#: builtin/clone.c:693 +#, c-format +msgid "working tree '%s' already exists." +msgstr "" + +#: builtin/clone.c:706 builtin/clone.c:720 +#, c-format +msgid "could not create leading directories of '%s'" +msgstr "" + +#: builtin/clone.c:709 +#, c-format +msgid "could not create work tree dir '%s'." +msgstr "" + +#: builtin/clone.c:728 +#, c-format +msgid "Cloning into bare repository '%s'...\n" +msgstr "" + +#: builtin/clone.c:730 +#, c-format +msgid "Cloning into '%s'...\n" +msgstr "" + +#: builtin/clone.c:786 +#, c-format +msgid "Don't know how to clone %s" +msgstr "" + +#: builtin/clone.c:835 +#, c-format +msgid "Remote branch %s not found in upstream %s" +msgstr "" + +#: builtin/clone.c:842 +msgid "You appear to have cloned an empty repository." +msgstr "" + +#: builtin/commit.c:42 +msgid "" +"Your name and email address were configured automatically based\n" +"on your username and hostname. Please check that they are accurate.\n" +"You can suppress this message by setting them explicitly:\n" +"\n" +" git config --global user.name \"Your Name\"\n" +" git config --global user.email you@example.com\n" +"\n" +"After doing this, you may fix the identity used for this commit with:\n" +"\n" +" git commit --amend --reset-author\n" +msgstr "" + +#: builtin/commit.c:54 +msgid "" +"You asked to amend the most recent commit, but doing so would make\n" +"it empty. You can repeat your command with --allow-empty, or you can\n" +"remove the commit entirely with \"git reset HEAD^\".\n" +msgstr "" + +#: builtin/commit.c:59 +msgid "" +"The previous cherry-pick is now empty, possibly due to conflict resolution.\n" +"If you wish to commit it anyway, use:\n" +"\n" +" git commit --allow-empty\n" +"\n" +"Otherwise, please use 'git reset'\n" +msgstr "" + +#: builtin/commit.c:205 builtin/reset.c:33 +msgid "merge" +msgstr "" + +#: builtin/commit.c:208 +msgid "cherry-pick" +msgstr "" + +#: builtin/commit.c:325 +msgid "failed to unpack HEAD tree object" +msgstr "" + +#: builtin/commit.c:367 +msgid "unable to create temporary index" +msgstr "" + +#: builtin/commit.c:373 +msgid "interactive add failed" +msgstr "" + +#: builtin/commit.c:406 builtin/commit.c:427 builtin/commit.c:473 +msgid "unable to write new_index file" +msgstr "" + +#: builtin/commit.c:457 +#, c-format +msgid "cannot do a partial commit during a %s." +msgstr "" + +#: builtin/commit.c:466 +msgid "cannot read the index" +msgstr "" + +#: builtin/commit.c:486 +msgid "unable to write temporary index file" +msgstr "" + +#: builtin/commit.c:550 builtin/commit.c:556 +#, c-format +msgid "invalid commit: %s" +msgstr "" + +#: builtin/commit.c:579 +msgid "malformed --author parameter" +msgstr "" + +#: builtin/commit.c:635 +#, c-format +msgid "Malformed ident string: '%s'" +msgstr "" + +#: builtin/commit.c:670 builtin/commit.c:703 builtin/commit.c:1000 +#, c-format +msgid "could not lookup commit %s" +msgstr "" + +#: builtin/commit.c:682 builtin/shortlog.c:296 +#, c-format +msgid "(reading log message from standard input)\n" +msgstr "" + +#: builtin/commit.c:684 +msgid "could not read log from standard input" +msgstr "" + +#: builtin/commit.c:688 +#, c-format +msgid "could not read log file '%s'" +msgstr "" + +#: builtin/commit.c:694 +msgid "commit has empty message" +msgstr "" + +#: builtin/commit.c:710 +msgid "could not read MERGE_MSG" +msgstr "" + +#: builtin/commit.c:714 +msgid "could not read SQUASH_MSG" +msgstr "" + +#: builtin/commit.c:718 +#, c-format +msgid "could not read '%s'" +msgstr "" + +#: builtin/commit.c:746 +#, c-format +msgid "could not open '%s'" +msgstr "" + +#: builtin/commit.c:770 +msgid "could not write commit template" +msgstr "" + +#: builtin/commit.c:783 +#, c-format +msgid "" +"\n" +"It looks like you may be committing a %s.\n" +"If this is not correct, please remove the file\n" +"\t%s\n" +"and try again.\n" +msgstr "" + +#: builtin/commit.c:796 +msgid "Please enter the commit message for your changes." +msgstr "" + +#: builtin/commit.c:799 +msgid "" +" Lines starting\n" +"with '#' will be ignored, and an empty message aborts the commit.\n" +msgstr "" + +#: builtin/commit.c:804 +msgid "" +" Lines starting\n" +"with '#' will be kept; you may remove them yourself if you want to.\n" +"An empty message aborts the commit.\n" +msgstr "" + +#: builtin/commit.c:816 +#, c-format +msgid "%sAuthor: %s" +msgstr "" + +#: builtin/commit.c:823 +#, c-format +msgid "%sCommitter: %s" +msgstr "" + +#: builtin/commit.c:843 +msgid "Cannot read index" +msgstr "" + +#: builtin/commit.c:880 +msgid "Error building trees" +msgstr "" + +#: builtin/commit.c:895 builtin/tag.c:357 +#, c-format +msgid "Please supply the message using either -m or -F option.\n" +msgstr "" + +#: builtin/commit.c:975 +#, c-format +msgid "No existing author found with '%s'" +msgstr "" + +#: builtin/commit.c:990 builtin/commit.c:1182 +#, c-format +msgid "Invalid untracked files mode '%s'" +msgstr "" + +#: builtin/commit.c:1030 +msgid "Using both --reset-author and --author does not make sense" +msgstr "" + +#: builtin/commit.c:1041 +msgid "You have nothing to amend." +msgstr "" + +#: builtin/commit.c:1043 +#, c-format +msgid "You are in the middle of a %s -- cannot amend." +msgstr "" + +#: builtin/commit.c:1045 +msgid "Options --squash and --fixup cannot be used together" +msgstr "" + +#: builtin/commit.c:1055 +msgid "Only one of -c/-C/-F/--fixup can be used." +msgstr "" + +#: builtin/commit.c:1057 +msgid "Option -m cannot be combined with -c/-C/-F/--fixup." +msgstr "" + +#: builtin/commit.c:1063 +msgid "--reset-author can be used only with -C, -c or --amend." +msgstr "" + +#: builtin/commit.c:1080 +msgid "Only one of --include/--only/--all/--interactive/--patch can be used." +msgstr "" + +#: builtin/commit.c:1082 +msgid "No paths with --include/--only does not make sense." +msgstr "" + +#: builtin/commit.c:1084 +msgid "Clever... amending the last one with dirty index." +msgstr "" + +#: builtin/commit.c:1086 +msgid "Explicit paths specified without -i nor -o; assuming --only paths..." +msgstr "" + +#: builtin/commit.c:1096 builtin/tag.c:556 +#, c-format +msgid "Invalid cleanup mode %s" +msgstr "" + +#: builtin/commit.c:1101 +msgid "Paths with -a does not make sense." +msgstr "" + +#: builtin/commit.c:1280 +msgid "couldn't look up newly created commit" +msgstr "" + +#: builtin/commit.c:1282 +msgid "could not parse newly created commit" +msgstr "" + +#: builtin/commit.c:1323 +msgid "detached HEAD" +msgstr "" + +#: builtin/commit.c:1325 +msgid " (root-commit)" +msgstr "" + +#: builtin/commit.c:1415 +msgid "could not parse HEAD commit" +msgstr "" + +#: builtin/commit.c:1452 builtin/merge.c:509 +#, c-format +msgid "could not open '%s' for reading" +msgstr "" + +#: builtin/commit.c:1459 +#, c-format +msgid "Corrupt MERGE_HEAD file (%s)" +msgstr "" + +#: builtin/commit.c:1466 +msgid "could not read MERGE_MODE" +msgstr "" + +#: builtin/commit.c:1485 +#, c-format +msgid "could not read commit message: %s" +msgstr "" + +#: builtin/commit.c:1499 +#, c-format +msgid "Aborting commit due to empty commit message.\n" +msgstr "" + +#: builtin/commit.c:1514 builtin/merge.c:935 builtin/merge.c:968 +msgid "failed to write commit object" +msgstr "" + +#: builtin/commit.c:1535 +msgid "cannot lock HEAD ref" +msgstr "" + +#: builtin/commit.c:1539 +msgid "cannot update HEAD ref" +msgstr "" + +#: builtin/commit.c:1550 +msgid "" +"Repository has been updated, but unable to write\n" +"new_index file. Check that disk is not full or quota is\n" +"not exceeded, and then \"git reset HEAD\" to recover." +msgstr "" + +#: builtin/describe.c:234 +#, c-format +msgid "annotated tag %s not available" +msgstr "" + +#: builtin/describe.c:238 +#, c-format +msgid "annotated tag %s has no embedded name" +msgstr "" + +#: builtin/describe.c:240 +#, c-format +msgid "tag '%s' is really '%s' here" +msgstr "" + +#: builtin/describe.c:267 +#, c-format +msgid "Not a valid object name %s" +msgstr "" + +#: builtin/describe.c:270 +#, c-format +msgid "%s is not a valid '%s' object" +msgstr "" + +#: builtin/describe.c:287 +#, c-format +msgid "no tag exactly matches '%s'" +msgstr "" + +#: builtin/describe.c:289 +#, c-format +msgid "searching to describe %s\n" +msgstr "" + +#: builtin/describe.c:329 +#, c-format +msgid "finished search at %s\n" +msgstr "" + +#: builtin/describe.c:353 +#, c-format +msgid "" +"No annotated tags can describe '%s'.\n" +"However, there were unannotated tags: try --tags." +msgstr "" + +#: builtin/describe.c:357 +#, c-format +msgid "" +"No tags can describe '%s'.\n" +"Try --always, or create some tags." +msgstr "" + +#: builtin/describe.c:378 +#, c-format +msgid "traversed %lu commits\n" +msgstr "" + +#: builtin/describe.c:381 +#, c-format +msgid "" +"more than %i tags found; listed %i most recent\n" +"gave up search at %s\n" +msgstr "" + +#: builtin/describe.c:436 +msgid "--long is incompatible with --abbrev=0" +msgstr "" + +#: builtin/describe.c:462 +msgid "No names found, cannot describe anything." +msgstr "" + +#: builtin/describe.c:482 +msgid "--dirty is incompatible with committishes" +msgstr "" + +#: builtin/diff.c:77 +#, c-format +msgid "'%s': not a regular file or symlink" +msgstr "" + +#: builtin/diff.c:220 +#, c-format +msgid "invalid option: %s" +msgstr "" + +#: builtin/diff.c:297 +msgid "Not a git repository" +msgstr "" + +#: builtin/diff.c:347 +#, c-format +msgid "invalid object '%s' given." +msgstr "" + +#: builtin/diff.c:352 +#, c-format +msgid "more than %d trees given: '%s'" +msgstr "" + +#: builtin/diff.c:362 +#, c-format +msgid "more than two blobs given: '%s'" +msgstr "" + +#: builtin/diff.c:370 +#, c-format +msgid "unhandled object '%s' given." +msgstr "" + +#: builtin/fetch.c:200 +msgid "Couldn't find remote ref HEAD" +msgstr "" + +#: builtin/fetch.c:252 +#, c-format +msgid "object %s not found" +msgstr "" + +#: builtin/fetch.c:258 +msgid "[up to date]" +msgstr "" + +#: builtin/fetch.c:272 +#, c-format +msgid "! %-*s %-*s -> %s (can't fetch in current branch)" +msgstr "" + +#: builtin/fetch.c:273 builtin/fetch.c:351 +msgid "[rejected]" +msgstr "" + +#: builtin/fetch.c:284 +msgid "[tag update]" +msgstr "" + +#: builtin/fetch.c:286 builtin/fetch.c:313 builtin/fetch.c:331 +msgid " (unable to update local ref)" +msgstr "" + +#: builtin/fetch.c:298 +msgid "[new tag]" +msgstr "" + +#: builtin/fetch.c:302 +msgid "[new branch]" +msgstr "" + +#: builtin/fetch.c:347 +msgid "unable to update local ref" +msgstr "" + +#: builtin/fetch.c:347 +msgid "forced update" +msgstr "" + +#: builtin/fetch.c:353 +msgid "(non-fast-forward)" +msgstr "" + +#: builtin/fetch.c:384 builtin/fetch.c:676 +#, c-format +msgid "cannot open %s: %s\n" +msgstr "" + +#: builtin/fetch.c:393 +#, c-format +msgid "%s did not send all necessary objects\n" +msgstr "" + +#: builtin/fetch.c:479 +#, c-format +msgid "From %.*s\n" +msgstr "" + +#: builtin/fetch.c:490 +#, c-format +msgid "" +"some local refs could not be updated; try running\n" +" 'git remote prune %s' to remove any old, conflicting branches" +msgstr "" + +#: builtin/fetch.c:540 +#, c-format +msgid " (%s will become dangling)\n" +msgstr "" + +#: builtin/fetch.c:541 +#, c-format +msgid " (%s has become dangling)\n" +msgstr "" + +#: builtin/fetch.c:548 +msgid "[deleted]" +msgstr "" + +#: builtin/fetch.c:549 +msgid "(none)" +msgstr "" + +#: builtin/fetch.c:666 +#, c-format +msgid "Refusing to fetch into current branch %s of non-bare repository" +msgstr "" + +#: builtin/fetch.c:700 +#, c-format +msgid "Don't know how to fetch from %s" +msgstr "" + +#: builtin/fetch.c:777 +#, c-format +msgid "Option \"%s\" value \"%s\" is not valid for %s" +msgstr "" + +#: builtin/fetch.c:780 +#, c-format +msgid "Option \"%s\" is ignored for %s\n" +msgstr "" + +#: builtin/fetch.c:879 +#, c-format +msgid "Fetching %s\n" +msgstr "" + +#: builtin/fetch.c:881 +#, c-format +msgid "Could not fetch %s" +msgstr "" + +#: builtin/fetch.c:898 +msgid "" +"No remote repository specified. Please, specify either a URL or a\n" +"remote name from which new revisions should be fetched." +msgstr "" + +#: builtin/fetch.c:918 +msgid "You need to specify a tag name." +msgstr "" + +#: builtin/fetch.c:970 +msgid "fetch --all does not take a repository argument" +msgstr "" + +#: builtin/fetch.c:972 +msgid "fetch --all does not make sense with refspecs" +msgstr "" + +#: builtin/fetch.c:983 +#, c-format +msgid "No such remote or remote group: %s" +msgstr "" + +#: builtin/fetch.c:991 +msgid "Fetching a group and specifying refspecs does not make sense" +msgstr "" + +#: builtin/gc.c:63 +#, c-format +msgid "Invalid %s: '%s'" +msgstr "" + +#: builtin/gc.c:78 +msgid "Too many options specified" +msgstr "" + +#: builtin/gc.c:103 +#, c-format +msgid "insanely long object directory %.*s" +msgstr "" + +#: builtin/gc.c:223 +#, c-format +msgid "Auto packing the repository for optimum performance.\n" +msgstr "" + +#: builtin/gc.c:226 +#, c-format +msgid "" +"Auto packing the repository for optimum performance. You may also\n" +"run \"git gc\" manually. See \"git help gc\" for more information.\n" +msgstr "" + +#: builtin/gc.c:256 +msgid "" +"There are too many unreachable loose objects; run 'git prune' to remove them." +msgstr "" + +#: builtin/grep.c:216 +#, c-format +msgid "grep: failed to create thread: %s" +msgstr "" + +#: builtin/grep.c:402 +#, c-format +msgid "Failed to chdir: %s" +msgstr "" + +#: builtin/grep.c:478 builtin/grep.c:512 +#, c-format +msgid "unable to read tree (%s)" +msgstr "" + +#: builtin/grep.c:526 +#, c-format +msgid "unable to grep from object of type %s" +msgstr "" + +#: builtin/grep.c:584 +#, c-format +msgid "switch `%c' expects a numerical value" +msgstr "" + +#: builtin/grep.c:601 +#, c-format +msgid "cannot open '%s'" +msgstr "" + +#: builtin/grep.c:888 +msgid "no pattern given." +msgstr "" + +#: builtin/grep.c:902 +#, c-format +msgid "bad object %s" +msgstr "" + +#: builtin/grep.c:943 +msgid "--open-files-in-pager only works on the worktree" +msgstr "" + +#: builtin/grep.c:966 +msgid "--cached or --untracked cannot be used with --no-index." +msgstr "" + +#: builtin/grep.c:971 +msgid "--no-index or --untracked cannot be used with revs." +msgstr "" + +#: builtin/grep.c:974 +msgid "--[no-]exclude-standard cannot be used for tracked contents." +msgstr "" + +#: builtin/grep.c:982 +msgid "both --cached and trees are given." +msgstr "" + +#: builtin/init-db.c:35 +#, c-format +msgid "Could not make %s writable by group" +msgstr "" + +#: builtin/init-db.c:62 +#, c-format +msgid "insanely long template name %s" +msgstr "" + +#: builtin/init-db.c:67 +#, c-format +msgid "cannot stat '%s'" +msgstr "" + +#: builtin/init-db.c:73 +#, c-format +msgid "cannot stat template '%s'" +msgstr "" + +#: builtin/init-db.c:80 +#, c-format +msgid "cannot opendir '%s'" +msgstr "" + +#: builtin/init-db.c:97 +#, c-format +msgid "cannot readlink '%s'" +msgstr "" + +#: builtin/init-db.c:99 +#, c-format +msgid "insanely long symlink %s" +msgstr "" + +#: builtin/init-db.c:102 +#, c-format +msgid "cannot symlink '%s' '%s'" +msgstr "" + +#: builtin/init-db.c:106 +#, c-format +msgid "cannot copy '%s' to '%s'" +msgstr "" + +#: builtin/init-db.c:110 +#, c-format +msgid "ignoring template %s" +msgstr "" + +#: builtin/init-db.c:133 +#, c-format +msgid "insanely long template path %s" +msgstr "" + +#: builtin/init-db.c:141 +#, c-format +msgid "templates not found %s" +msgstr "" + +#: builtin/init-db.c:154 +#, c-format +msgid "not copying templates of a wrong format version %d from '%s'" +msgstr "" + +#: builtin/init-db.c:192 +#, c-format +msgid "insane git directory %s" +msgstr "" + +#: builtin/init-db.c:322 builtin/init-db.c:325 +#, c-format +msgid "%s already exists" +msgstr "" + +#: builtin/init-db.c:354 +#, c-format +msgid "unable to handle file type %d" +msgstr "" + +#: builtin/init-db.c:357 +#, c-format +msgid "unable to move %s to %s" +msgstr "" + +#: builtin/init-db.c:362 +#, c-format +msgid "Could not create git link %s" +msgstr "" + +#. +#. * TRANSLATORS: The first '%s' is either "Reinitialized +#. * existing" or "Initialized empty", the second " shared" or +#. * "", and the last '%s%s' is the verbatim directory name. +#. +#: builtin/init-db.c:419 +#, c-format +msgid "%s%s Git repository in %s%s\n" +msgstr "" + +#: builtin/init-db.c:420 +msgid "Reinitialized existing" +msgstr "" + +#: builtin/init-db.c:420 +msgid "Initialized empty" +msgstr "" + +#: builtin/init-db.c:421 +msgid " shared" +msgstr "" + +#: builtin/init-db.c:440 +msgid "cannot tell cwd" +msgstr "" + +#: builtin/init-db.c:521 builtin/init-db.c:528 +#, c-format +msgid "cannot mkdir %s" +msgstr "" + +#: builtin/init-db.c:532 +#, c-format +msgid "cannot chdir to %s" +msgstr "" + +#: builtin/init-db.c:554 +#, c-format +msgid "" +"%s (or --work-tree=<directory>) not allowed without specifying %s (or --git-" +"dir=<directory>)" +msgstr "" + +#: builtin/init-db.c:578 +msgid "Cannot access current working directory" +msgstr "" + +#: builtin/init-db.c:585 +#, c-format +msgid "Cannot access work tree '%s'" +msgstr "" + +#: builtin/log.c:187 +#, c-format +msgid "Final output: %d %s\n" +msgstr "" + +#: builtin/log.c:395 builtin/log.c:483 +#, c-format +msgid "Could not read object %s" +msgstr "" + +#: builtin/log.c:507 +#, c-format +msgid "Unknown type: %d" +msgstr "" + +#: builtin/log.c:596 +msgid "format.headers without value" +msgstr "" + +#: builtin/log.c:669 +msgid "name of output directory is too long" +msgstr "" + +#: builtin/log.c:680 +#, c-format +msgid "Cannot open patch file %s" +msgstr "" + +#: builtin/log.c:694 +msgid "Need exactly one range." +msgstr "" + +#: builtin/log.c:702 +msgid "Not a range." +msgstr "" + +#: builtin/log.c:739 +msgid "Could not extract email from committer identity." +msgstr "" + +#: builtin/log.c:785 +msgid "Cover letter needs email format" +msgstr "" + +#: builtin/log.c:879 +#, c-format +msgid "insane in-reply-to: %s" +msgstr "" + +#: builtin/log.c:952 +msgid "Two output directories?" +msgstr "" + +#: builtin/log.c:1173 +#, c-format +msgid "bogus committer info %s" +msgstr "" + +#: builtin/log.c:1218 +msgid "-n and -k are mutually exclusive." +msgstr "" + +#: builtin/log.c:1220 +msgid "--subject-prefix and -k are mutually exclusive." +msgstr "" + +#: builtin/log.c:1225 builtin/shortlog.c:284 +#, c-format +msgid "unrecognized argument: %s" +msgstr "" + +#: builtin/log.c:1228 +msgid "--name-only does not make sense" +msgstr "" + +#: builtin/log.c:1230 +msgid "--name-status does not make sense" +msgstr "" + +#: builtin/log.c:1232 +msgid "--check does not make sense" +msgstr "" + +#: builtin/log.c:1255 +msgid "standard output, or directory, which one?" +msgstr "" + +#: builtin/log.c:1257 +#, c-format +msgid "Could not create directory '%s'" +msgstr "" + +#: builtin/log.c:1410 +msgid "Failed to create output files" +msgstr "" + +#: builtin/log.c:1514 +#, c-format +msgid "" +"Could not find a tracked remote branch, please specify <upstream> manually.\n" +msgstr "" + +#: builtin/log.c:1530 builtin/log.c:1532 builtin/log.c:1544 +#, c-format +msgid "Unknown commit %s" +msgstr "" + +#: builtin/merge.c:91 +msgid "switch `m' requires a value" +msgstr "" + +#: builtin/merge.c:128 +#, c-format +msgid "Could not find merge strategy '%s'.\n" +msgstr "" + +#: builtin/merge.c:129 +#, c-format +msgid "Available strategies are:" +msgstr "" + +#: builtin/merge.c:134 +#, c-format +msgid "Available custom strategies are:" +msgstr "" + +#: builtin/merge.c:241 +msgid "could not run stash." +msgstr "" + +#: builtin/merge.c:246 +msgid "stash failed" +msgstr "" + +#: builtin/merge.c:251 +#, c-format +msgid "not a valid object: %s" +msgstr "" + +#: builtin/merge.c:270 builtin/merge.c:287 +msgid "read-tree failed" +msgstr "" + +#: builtin/merge.c:317 +msgid " (nothing to squash)" +msgstr "" + +#: builtin/merge.c:330 +#, c-format +msgid "Squash commit -- not updating HEAD\n" +msgstr "" + +#: builtin/merge.c:362 +msgid "Writing SQUASH_MSG" +msgstr "" + +#: builtin/merge.c:364 +msgid "Finishing SQUASH_MSG" +msgstr "" + +#: builtin/merge.c:386 +#, c-format +msgid "No merge message -- not updating HEAD\n" +msgstr "" + +#: builtin/merge.c:437 +#, c-format +msgid "'%s' does not point to a commit" +msgstr "" + +#: builtin/merge.c:536 +#, c-format +msgid "Bad branch.%s.mergeoptions string: %s" +msgstr "" + +#: builtin/merge.c:629 +msgid "git write-tree failed to write a tree" +msgstr "" + +#: builtin/merge.c:679 +msgid "failed to read the cache" +msgstr "" + +#: builtin/merge.c:696 +msgid "Unable to write index." +msgstr "" + +#: builtin/merge.c:709 +msgid "Not handling anything other than two heads merge." +msgstr "" + +#: builtin/merge.c:723 +#, c-format +msgid "Unknown option for merge-recursive: -X%s" +msgstr "" + +#: builtin/merge.c:737 +#, c-format +msgid "unable to write %s" +msgstr "" + +#: builtin/merge.c:876 +#, c-format +msgid "Could not read from '%s'" +msgstr "" + +#: builtin/merge.c:885 +#, c-format +msgid "Not committing merge; use 'git commit' to complete the merge.\n" +msgstr "" + +#: builtin/merge.c:891 +msgid "" +"Please enter a commit message to explain why this merge is necessary,\n" +"especially if it merges an updated upstream into a topic branch.\n" +"\n" +"Lines starting with '#' will be ignored, and an empty message aborts\n" +"the commit.\n" +msgstr "" + +#: builtin/merge.c:915 +msgid "Empty commit message." +msgstr "" + +#: builtin/merge.c:927 +#, c-format +msgid "Wonderful.\n" +msgstr "" + +#: builtin/merge.c:1000 +#, c-format +msgid "Automatic merge failed; fix conflicts and then commit the result.\n" +msgstr "" + +#: builtin/merge.c:1016 +#, c-format +msgid "'%s' is not a commit" +msgstr "" + +#: builtin/merge.c:1057 +msgid "No current branch." +msgstr "" + +#: builtin/merge.c:1059 +msgid "No remote for the current branch." +msgstr "" + +#: builtin/merge.c:1061 +msgid "No default upstream defined for the current branch." +msgstr "" + +#: builtin/merge.c:1066 +#, c-format +msgid "No remote tracking branch for %s from %s" +msgstr "" + +#: builtin/merge.c:1188 +msgid "There is no merge to abort (MERGE_HEAD missing)." +msgstr "" + +#: builtin/merge.c:1204 git-pull.sh:31 +msgid "" +"You have not concluded your merge (MERGE_HEAD exists).\n" +"Please, commit your changes before you can merge." +msgstr "" + +#: builtin/merge.c:1207 git-pull.sh:34 +msgid "You have not concluded your merge (MERGE_HEAD exists)." +msgstr "" + +#: builtin/merge.c:1211 +msgid "" +"You have not concluded your cherry-pick (CHERRY_PICK_HEAD exists).\n" +"Please, commit your changes before you can merge." +msgstr "" + +#: builtin/merge.c:1214 +msgid "You have not concluded your cherry-pick (CHERRY_PICK_HEAD exists)." +msgstr "" + +#: builtin/merge.c:1223 +msgid "You cannot combine --squash with --no-ff." +msgstr "" + +#: builtin/merge.c:1228 +msgid "You cannot combine --no-ff with --ff-only." +msgstr "" + +#: builtin/merge.c:1235 +msgid "No commit specified and merge.defaultToUpstream not set." +msgstr "" + +#: builtin/merge.c:1266 +msgid "Can merge only exactly one commit into empty head" +msgstr "" + +#: builtin/merge.c:1269 +msgid "Squash commit into empty head not supported yet" +msgstr "" + +#: builtin/merge.c:1271 +msgid "Non-fast-forward commit does not make sense into an empty head" +msgstr "" + +#: builtin/merge.c:1275 builtin/merge.c:1319 +#, c-format +msgid "%s - not something we can merge" +msgstr "" + +#: builtin/merge.c:1385 +#, c-format +msgid "Updating %s..%s\n" +msgstr "" + +#: builtin/merge.c:1423 +#, c-format +msgid "Trying really trivial in-index merge...\n" +msgstr "" + +#: builtin/merge.c:1430 +#, c-format +msgid "Nope.\n" +msgstr "" + +#: builtin/merge.c:1462 +msgid "Not possible to fast-forward, aborting." +msgstr "" + +#: builtin/merge.c:1485 builtin/merge.c:1562 +#, c-format +msgid "Rewinding the tree to pristine...\n" +msgstr "" + +#: builtin/merge.c:1489 +#, c-format +msgid "Trying merge strategy %s...\n" +msgstr "" + +#: builtin/merge.c:1553 +#, c-format +msgid "No merge strategy handled the merge.\n" +msgstr "" + +#: builtin/merge.c:1555 +#, c-format +msgid "Merge with strategy %s failed.\n" +msgstr "" + +#: builtin/merge.c:1564 +#, c-format +msgid "Using the %s to prepare resolving by hand.\n" +msgstr "" + +#: builtin/merge.c:1575 +#, c-format +msgid "Automatic merge went well; stopped before committing as requested\n" +msgstr "" + +#: builtin/mv.c:108 +#, c-format +msgid "Checking rename of '%s' to '%s'\n" +msgstr "" + +#: builtin/mv.c:112 +msgid "bad source" +msgstr "" + +#: builtin/mv.c:115 +msgid "can not move directory into itself" +msgstr "" + +#: builtin/mv.c:118 +msgid "cannot move directory over file" +msgstr "" + +#: builtin/mv.c:128 +#, c-format +msgid "Huh? %.*s is in index?" +msgstr "" + +#: builtin/mv.c:140 +msgid "source directory is empty" +msgstr "" + +#: builtin/mv.c:171 +msgid "not under version control" +msgstr "" + +#: builtin/mv.c:173 +msgid "destination exists" +msgstr "" + +#: builtin/mv.c:181 +#, c-format +msgid "overwriting '%s'" +msgstr "" + +#: builtin/mv.c:184 +msgid "Cannot overwrite" +msgstr "" + +#: builtin/mv.c:187 +msgid "multiple sources for the same target" +msgstr "" + +#: builtin/mv.c:202 +#, c-format +msgid "%s, source=%s, destination=%s" +msgstr "" + +#: builtin/mv.c:212 +#, c-format +msgid "Renaming %s to %s\n" +msgstr "" + +#: builtin/mv.c:215 +#, c-format +msgid "renaming '%s' failed" +msgstr "" + +#: builtin/notes.c:139 +#, c-format +msgid "unable to start 'show' for object '%s'" +msgstr "" + +#: builtin/notes.c:145 +msgid "can't fdopen 'show' output fd" +msgstr "" + +#: builtin/notes.c:155 +#, c-format +msgid "failed to close pipe to 'show' for object '%s'" +msgstr "" + +#: builtin/notes.c:158 +#, c-format +msgid "failed to finish 'show' for object '%s'" +msgstr "" + +#: builtin/notes.c:175 builtin/tag.c:343 +#, c-format +msgid "could not create file '%s'" +msgstr "" + +#: builtin/notes.c:189 +msgid "Please supply the note contents using either -m or -F option" +msgstr "" + +#: builtin/notes.c:210 builtin/notes.c:973 +#, c-format +msgid "Removing note for object %s\n" +msgstr "" + +#: builtin/notes.c:215 +msgid "unable to write note object" +msgstr "" + +#: builtin/notes.c:217 +#, c-format +msgid "The note contents has been left in %s" +msgstr "" + +#: builtin/notes.c:251 builtin/tag.c:521 +#, c-format +msgid "cannot read '%s'" +msgstr "" + +#: builtin/notes.c:253 builtin/tag.c:524 +#, c-format +msgid "could not open or read '%s'" +msgstr "" + +#: builtin/notes.c:272 builtin/notes.c:445 builtin/notes.c:447 +#: builtin/notes.c:507 builtin/notes.c:561 builtin/notes.c:644 +#: builtin/notes.c:649 builtin/notes.c:724 builtin/notes.c:766 +#: builtin/notes.c:968 builtin/reset.c:293 builtin/tag.c:537 +#, c-format +msgid "Failed to resolve '%s' as a valid ref." +msgstr "" + +#: builtin/notes.c:275 +#, c-format +msgid "Failed to read object '%s'." +msgstr "" + +#: builtin/notes.c:299 +msgid "Cannot commit uninitialized/unreferenced notes tree" +msgstr "" + +#: builtin/notes.c:340 +#, c-format +msgid "Bad notes.rewriteMode value: '%s'" +msgstr "" + +#: builtin/notes.c:350 +#, c-format +msgid "Refusing to rewrite notes in %s (outside of refs/notes/)" +msgstr "" + +#. TRANSLATORS: The first %s is the name of the +#. environment variable, the second %s is its value +#: builtin/notes.c:377 +#, c-format +msgid "Bad %s value: '%s'" +msgstr "" + +#: builtin/notes.c:441 +#, c-format +msgid "Malformed input line: '%s'." +msgstr "" + +#: builtin/notes.c:456 +#, c-format +msgid "Failed to copy notes from '%s' to '%s'" +msgstr "" + +#: builtin/notes.c:500 builtin/notes.c:554 builtin/notes.c:627 +#: builtin/notes.c:639 builtin/notes.c:712 builtin/notes.c:759 +#: builtin/notes.c:1033 +msgid "too many parameters" +msgstr "" + +#: builtin/notes.c:513 builtin/notes.c:772 +#, c-format +msgid "No note found for object %s." +msgstr "" + +#: builtin/notes.c:580 +#, c-format +msgid "" +"Cannot add notes. Found existing notes for object %s. Use '-f' to overwrite " +"existing notes" +msgstr "" + +#: builtin/notes.c:585 builtin/notes.c:662 +#, c-format +msgid "Overwriting existing notes for object %s\n" +msgstr "" + +#: builtin/notes.c:635 +msgid "too few parameters" +msgstr "" + +#: builtin/notes.c:656 +#, c-format +msgid "" +"Cannot copy notes. Found existing notes for object %s. Use '-f' to overwrite " +"existing notes" +msgstr "" + +#: builtin/notes.c:668 +#, c-format +msgid "Missing notes on source object %s. Cannot copy." +msgstr "" + +#: builtin/notes.c:717 +#, c-format +msgid "" +"The -m/-F/-c/-C options have been deprecated for the 'edit' subcommand.\n" +"Please use 'git notes add -f -m/-F/-c/-C' instead.\n" +msgstr "" + +#: builtin/notes.c:971 +#, c-format +msgid "Object %s has no note\n" +msgstr "" + +#: builtin/notes.c:1103 +#, c-format +msgid "Unknown subcommand: %s" +msgstr "" + +#: builtin/pack-objects.c:2310 +#, c-format +msgid "unsupported index version %s" +msgstr "" + +#: builtin/pack-objects.c:2314 +#, c-format +msgid "bad index version '%s'" +msgstr "" + +#: builtin/pack-objects.c:2322 +#, c-format +msgid "option %s does not accept negative form" +msgstr "" + +#: builtin/pack-objects.c:2326 +#, c-format +msgid "unable to parse value '%s' for option %s" +msgstr "" + +#: builtin/push.c:44 +msgid "tag shorthand without <tag>" +msgstr "" + +#: builtin/push.c:63 +msgid "--delete only accepts plain target ref names" +msgstr "" + +#: builtin/push.c:73 +#, c-format +msgid "" +"You are not currently on a branch.\n" +"To push the history leading to the current (detached HEAD)\n" +"state now, use\n" +"\n" +" git push %s HEAD:<name-of-remote-branch>\n" +msgstr "" + +#: builtin/push.c:80 +#, c-format +msgid "" +"The current branch %s has no upstream branch.\n" +"To push the current branch and set the remote as upstream, use\n" +"\n" +" git push --set-upstream %s %s\n" +msgstr "" + +#: builtin/push.c:88 +#, c-format +msgid "The current branch %s has multiple upstream branches, refusing to push." +msgstr "" + +#: builtin/push.c:111 +msgid "" +"You didn't specify any refspecs to push, and push.default is \"nothing\"." +msgstr "" + +#: builtin/push.c:131 +#, c-format +msgid "Pushing to %s\n" +msgstr "" + +#: builtin/push.c:135 +#, c-format +msgid "failed to push some refs to '%s'" +msgstr "" + +#: builtin/push.c:143 +#, c-format +msgid "" +"To prevent you from losing history, non-fast-forward updates were rejected\n" +"Merge the remote changes (e.g. 'git pull') before pushing again. See the\n" +"'Note about fast-forwards' section of 'git push --help' for details.\n" +msgstr "" + +#: builtin/push.c:160 +#, c-format +msgid "bad repository '%s'" +msgstr "" + +#: builtin/push.c:161 +msgid "" +"No configured push destination.\n" +"Either specify the URL from the command-line or configure a remote " +"repository using\n" +"\n" +" git remote add <name> <url>\n" +"\n" +"and then push using the remote name\n" +"\n" +" git push <name>\n" +msgstr "" + +#: builtin/push.c:176 +msgid "--all and --tags are incompatible" +msgstr "" + +#: builtin/push.c:177 +msgid "--all can't be combined with refspecs" +msgstr "" + +#: builtin/push.c:182 +msgid "--mirror and --tags are incompatible" +msgstr "" + +#: builtin/push.c:183 +msgid "--mirror can't be combined with refspecs" +msgstr "" + +#: builtin/push.c:188 +msgid "--all and --mirror are incompatible" +msgstr "" + +#: builtin/push.c:274 +msgid "--delete is incompatible with --all, --mirror and --tags" +msgstr "" + +#: builtin/push.c:276 +msgid "--delete doesn't make sense without any refs" +msgstr "" + +#: builtin/reset.c:33 +msgid "mixed" +msgstr "" + +#: builtin/reset.c:33 +msgid "soft" +msgstr "" + +#: builtin/reset.c:33 +msgid "hard" +msgstr "" + +#: builtin/reset.c:33 +msgid "keep" +msgstr "" + +#: builtin/reset.c:77 +msgid "You do not have a valid HEAD." +msgstr "" + +#: builtin/reset.c:79 +msgid "Failed to find tree of HEAD." +msgstr "" + +#: builtin/reset.c:85 +#, c-format +msgid "Failed to find tree of %s." +msgstr "" + +#: builtin/reset.c:96 +msgid "Could not write new index file." +msgstr "" + +#: builtin/reset.c:106 +#, c-format +msgid "HEAD is now at %s" +msgstr "" + +#: builtin/reset.c:130 +msgid "Could not read index" +msgstr "" + +#: builtin/reset.c:133 +msgid "Unstaged changes after reset:" +msgstr "" + +#: builtin/reset.c:223 +#, c-format +msgid "Cannot do a %s reset in the middle of a merge." +msgstr "" + +#: builtin/reset.c:297 +#, c-format +msgid "Could not parse object '%s'." +msgstr "" + +#: builtin/reset.c:302 +msgid "--patch is incompatible with --{hard,mixed,soft}" +msgstr "" + +#: builtin/reset.c:311 +msgid "--mixed with paths is deprecated; use 'git reset -- <paths>' instead." +msgstr "" + +#: builtin/reset.c:313 +#, c-format +msgid "Cannot do %s reset with paths." +msgstr "" + +#: builtin/reset.c:325 +#, c-format +msgid "%s reset is not allowed in a bare repository" +msgstr "" + +#: builtin/reset.c:341 +#, c-format +msgid "Could not reset index file to revision '%s'." +msgstr "" + +#: builtin/revert.c:70 builtin/revert.c:91 +#, c-format +msgid "%s: %s cannot be used with %s" +msgstr "" + +#: builtin/revert.c:126 +msgid "program error" +msgstr "" + +#: builtin/revert.c:209 +msgid "revert failed" +msgstr "" + +#: builtin/revert.c:224 +msgid "cherry-pick failed" +msgstr "" + +#: builtin/rm.c:109 +#, c-format +msgid "" +"'%s' has staged content different from both the file and the HEAD\n" +"(use -f to force removal)" +msgstr "" + +#: builtin/rm.c:115 +#, c-format +msgid "" +"'%s' has changes staged in the index\n" +"(use --cached to keep the file, or -f to force removal)" +msgstr "" + +#: builtin/rm.c:119 +#, c-format +msgid "" +"'%s' has local modifications\n" +"(use --cached to keep the file, or -f to force removal)" +msgstr "" + +#: builtin/rm.c:194 +#, c-format +msgid "not removing '%s' recursively without -r" +msgstr "" + +#: builtin/rm.c:230 +#, c-format +msgid "git rm: unable to remove %s" +msgstr "" + +#: builtin/shortlog.c:157 +#, c-format +msgid "Missing author: %s" +msgstr "" + +#: builtin/tag.c:58 +#, c-format +msgid "malformed object at '%s'" +msgstr "" + +#: builtin/tag.c:205 +#, c-format +msgid "tag name too long: %.*s..." +msgstr "" + +#: builtin/tag.c:210 +#, c-format +msgid "tag '%s' not found." +msgstr "" + +#: builtin/tag.c:225 +#, c-format +msgid "Deleted tag '%s' (was %s)\n" +msgstr "" + +#: builtin/tag.c:237 +#, c-format +msgid "could not verify the tag '%s'" +msgstr "" + +#: builtin/tag.c:247 +msgid "" +"\n" +"#\n" +"# Write a tag message\n" +"# Lines starting with '#' will be ignored.\n" +"#\n" +msgstr "" + +#: builtin/tag.c:254 +msgid "" +"\n" +"#\n" +"# Write a tag message\n" +"# Lines starting with '#' will be kept; you may remove them yourself if you " +"want to.\n" +"#\n" +msgstr "" + +#: builtin/tag.c:294 +msgid "unable to sign the tag" +msgstr "" + +#: builtin/tag.c:296 +msgid "unable to write tag file" +msgstr "" + +#: builtin/tag.c:321 +msgid "bad object type." +msgstr "" + +#: builtin/tag.c:334 +msgid "tag header too big." +msgstr "" + +#: builtin/tag.c:366 +msgid "no tag message?" +msgstr "" + +#: builtin/tag.c:372 +#, c-format +msgid "The tag message has been left in %s\n" +msgstr "" + +#: builtin/tag.c:421 +msgid "switch 'points-at' requires an object" +msgstr "" + +#: builtin/tag.c:423 +#, c-format +msgid "malformed object name '%s'" +msgstr "" + +#: builtin/tag.c:502 +msgid "-n option is only allowed with -l." +msgstr "" + +#: builtin/tag.c:504 +msgid "--contains option is only allowed with -l." +msgstr "" + +#: builtin/tag.c:506 +msgid "--points-at option is only allowed with -l." +msgstr "" + +#: builtin/tag.c:514 +msgid "only one -F or -m option is allowed." +msgstr "" + +#: builtin/tag.c:534 +msgid "too many params" +msgstr "" + +#: builtin/tag.c:540 +#, c-format +msgid "'%s' is not a valid tag name." +msgstr "" + +#: builtin/tag.c:545 +#, c-format +msgid "tag '%s' already exists" +msgstr "" + +#: builtin/tag.c:563 +#, c-format +msgid "%s: cannot lock the ref" +msgstr "" + +#: builtin/tag.c:565 +#, c-format +msgid "%s: cannot update the ref" +msgstr "" + +#: builtin/tag.c:567 +#, c-format +msgid "Updated tag '%s' (was %s)\n" +msgstr "" + +#: git-am.sh:49 +msgid "You need to set your committer info first" +msgstr "" + +#: git-am.sh:136 +msgid "Repository lacks necessary blobs to fall back on 3-way merge." +msgstr "" + +#: git-am.sh:147 +msgid "" +"Did you hand edit your patch?\n" +"It does not apply to blobs recorded in its index." +msgstr "" + +#: git-am.sh:156 +msgid "Falling back to patching base and 3-way merge..." +msgstr "" + +#: git-am.sh:268 +msgid "Only one StGIT patch series can be applied at once" +msgstr "" + +#: git-am.sh:355 +#, sh-format +msgid "Patch format $patch_format is not supported." +msgstr "" + +#: git-am.sh:357 +msgid "Patch format detection failed." +msgstr "" + +#: git-am.sh:411 +msgid "-d option is no longer supported. Do not use." +msgstr "" + +#: git-am.sh:474 +#, sh-format +msgid "previous rebase directory $dotest still exists but mbox given." +msgstr "" + +#: git-am.sh:479 +msgid "Please make up your mind. --skip or --abort?" +msgstr "" + +#: git-am.sh:506 +msgid "Resolve operation not in progress, we are not resuming." +msgstr "" + +#: git-am.sh:572 +#, sh-format +msgid "Dirty index: cannot apply patches (dirty: $files)" +msgstr "" + +#: git-am.sh:748 +msgid "cannot be interactive without stdin connected to a terminal." +msgstr "" + +#. TRANSLATORS: Make sure to include [y], [n], [e], [v] and [a] +#. in your translation. The program will only accept English +#. input at this point. +#: git-am.sh:759 +msgid "Apply? [y]es/[n]o/[e]dit/[v]iew patch/[a]ccept all " +msgstr "" + +#: git-am.sh:795 +#, sh-format +msgid "Applying: $FIRSTLINE" +msgstr "" + +#: git-am.sh:840 +msgid "No changes -- Patch already applied." +msgstr "" + +#: git-am.sh:866 +msgid "applying to an empty history" +msgstr "" + +#. TRANSLATORS: Make sure to include [Y] and [n] in your +#. translation. The program will only accept English input +#. at this point. +#: git-bisect.sh:54 +msgid "Do you want me to do it for you [Y/n]? " +msgstr "" + +#: git-bisect.sh:95 +#, sh-format +msgid "unrecognised option: '$arg'" +msgstr "" + +#: git-bisect.sh:99 +#, sh-format +msgid "'$arg' does not appear to be a valid revision" +msgstr "" + +#: git-bisect.sh:117 +msgid "Bad HEAD - I need a HEAD" +msgstr "" + +#: git-bisect.sh:130 +#, sh-format +msgid "" +"Checking out '$start_head' failed. Try 'git bisect reset <validbranch>'." +msgstr "" + +#: git-bisect.sh:140 +msgid "won't bisect on seeked tree" +msgstr "" + +#: git-bisect.sh:144 +msgid "Bad HEAD - strange symbolic ref" +msgstr "" + +#: git-bisect.sh:189 +#, sh-format +msgid "Bad bisect_write argument: $state" +msgstr "" + +#: git-bisect.sh:218 +#, sh-format +msgid "Bad rev input: $arg" +msgstr "" + +#: git-bisect.sh:232 +msgid "Please call 'bisect_state' with at least one argument." +msgstr "" + +#: git-bisect.sh:244 +#, sh-format +msgid "Bad rev input: $rev" +msgstr "" + +#: git-bisect.sh:250 +msgid "'git bisect bad' can take only one argument." +msgstr "" + +#. TRANSLATORS: Make sure to include [Y] and [n] in your +#. translation. The program will only accept English input +#. at this point. +#: git-bisect.sh:279 +msgid "Are you sure [Y/n]? " +msgstr "" + +#: git-bisect.sh:354 +#, sh-format +msgid "'$invalid' is not a valid commit" +msgstr "" + +#: git-bisect.sh:363 +#, sh-format +msgid "" +"Could not check out original HEAD '$branch'.\n" +"Try 'git bisect reset <commit>'." +msgstr "" + +#: git-bisect.sh:390 +msgid "No logfile given" +msgstr "" + +#: git-bisect.sh:391 +#, sh-format +msgid "cannot read $file for replaying" +msgstr "" + +#: git-bisect.sh:408 +msgid "?? what are you talking about?" +msgstr "" + +#: git-bisect.sh:474 +msgid "We are not bisecting." +msgstr "" + +#: git-pull.sh:21 +msgid "" +"Pull is not possible because you have unmerged files.\n" +"Please, fix them up in the work tree, and then use 'git add/rm <file>'\n" +"as appropriate to mark resolution, or use 'git commit -a'." +msgstr "" + +#: git-pull.sh:25 +msgid "Pull is not possible because you have unmerged files." +msgstr "" + +#: git-pull.sh:197 +msgid "updating an unborn branch with changes added to the index" +msgstr "" + +#: git-pull.sh:253 +msgid "Cannot merge multiple branches into empty head" +msgstr "" + +#: git-pull.sh:257 +msgid "Cannot rebase onto multiple branches" +msgstr "" + +#: git-stash.sh:51 +msgid "git stash clear with parameters is unimplemented" +msgstr "" + +#: git-stash.sh:74 +msgid "You do not have the initial commit yet" +msgstr "" + +#: git-stash.sh:89 +msgid "Cannot save the current index state" +msgstr "" + +#: git-stash.sh:123 git-stash.sh:136 +msgid "Cannot save the current worktree state" +msgstr "" + +#: git-stash.sh:140 +msgid "No changes selected" +msgstr "" + +#: git-stash.sh:143 +msgid "Cannot remove temporary index (can't happen)" +msgstr "" + +#: git-stash.sh:156 +msgid "Cannot record working tree state" +msgstr "" + +#: git-stash.sh:223 +msgid "No local changes to save" +msgstr "" + +#: git-stash.sh:227 +msgid "Cannot initialize stash" +msgstr "" + +#: git-stash.sh:235 +msgid "Cannot save the current status" +msgstr "" + +#: git-stash.sh:253 +msgid "Cannot remove worktree changes" +msgstr "" + +#: git-stash.sh:352 +msgid "No stash found." +msgstr "" + +#: git-stash.sh:359 +#, sh-format +msgid "Too many revisions specified: $REV" +msgstr "" + +#: git-stash.sh:365 +#, sh-format +msgid "$reference is not valid reference" +msgstr "" + +#: git-stash.sh:393 +#, sh-format +msgid "'$args' is not a stash-like commit" +msgstr "" + +#: git-stash.sh:404 +#, sh-format +msgid "'$args' is not a stash reference" +msgstr "" + +#: git-stash.sh:412 +msgid "unable to refresh index" +msgstr "" + +#: git-stash.sh:416 +msgid "Cannot apply a stash in the middle of a merge" +msgstr "" + +#: git-stash.sh:424 +msgid "Conflicts in index. Try without --index." +msgstr "" + +#: git-stash.sh:426 +msgid "Could not save index tree" +msgstr "" + +#: git-stash.sh:460 +msgid "Cannot unstage modified files" +msgstr "" + +#: git-stash.sh:491 +#, sh-format +msgid "Dropped ${REV} ($s)" +msgstr "" + +#: git-stash.sh:492 +#, sh-format +msgid "${REV}: Could not drop stash entry" +msgstr "" + +#: git-stash.sh:499 +msgid "No branch name specified" +msgstr "" + +#: git-stash.sh:570 +msgid "(To restore them type \"git stash apply\")" +msgstr "" + +#: git-submodule.sh:56 +#, sh-format +msgid "cannot strip one component off url '$remoteurl'" +msgstr "" + +#: git-submodule.sh:108 +#, sh-format +msgid "No submodule mapping found in .gitmodules for path '$path'" +msgstr "" + +#: git-submodule.sh:149 +#, sh-format +msgid "Clone of '$url' into submodule path '$path' failed" +msgstr "" + +#: git-submodule.sh:159 +#, sh-format +msgid "Gitdir '$a' is part of the submodule path '$b' or vice versa" +msgstr "" + +#: git-submodule.sh:247 +#, sh-format +msgid "repo URL: '$repo' must be absolute or begin with ./|../" +msgstr "" + +#: git-submodule.sh:264 +#, sh-format +msgid "'$path' already exists in the index" +msgstr "" + +#: git-submodule.sh:281 +#, sh-format +msgid "'$path' already exists and is not a valid git repo" +msgstr "" + +#: git-submodule.sh:295 +#, sh-format +msgid "Unable to checkout submodule '$path'" +msgstr "" + +#: git-submodule.sh:300 +#, sh-format +msgid "Failed to add submodule '$path'" +msgstr "" + +#: git-submodule.sh:305 +#, sh-format +msgid "Failed to register submodule '$path'" +msgstr "" + +#: git-submodule.sh:347 +#, sh-format +msgid "Entering '$prefix$path'" +msgstr "" + +#: git-submodule.sh:359 +#, sh-format +msgid "Stopping at '$path'; script returned non-zero status." +msgstr "" + +#: git-submodule.sh:401 +#, sh-format +msgid "No url found for submodule path '$path' in .gitmodules" +msgstr "" + +#: git-submodule.sh:410 +#, sh-format +msgid "Failed to register url for submodule path '$path'" +msgstr "" + +#: git-submodule.sh:418 +#, sh-format +msgid "Failed to register update mode for submodule path '$path'" +msgstr "" + +#: git-submodule.sh:420 +#, sh-format +msgid "Submodule '$name' ($url) registered for path '$path'" +msgstr "" + +#: git-submodule.sh:519 +#, sh-format +msgid "" +"Submodule path '$path' not initialized\n" +"Maybe you want to use 'update --init'?" +msgstr "" + +#: git-submodule.sh:532 +#, sh-format +msgid "Unable to find current revision in submodule path '$path'" +msgstr "" + +#: git-submodule.sh:551 +#, sh-format +msgid "Unable to fetch in submodule path '$path'" +msgstr "" + +#: git-submodule.sh:565 +#, sh-format +msgid "Unable to rebase '$sha1' in submodule path '$path'" +msgstr "" + +#: git-submodule.sh:566 +#, sh-format +msgid "Submodule path '$path': rebased into '$sha1'" +msgstr "" + +#: git-submodule.sh:571 +#, sh-format +msgid "Unable to merge '$sha1' in submodule path '$path'" +msgstr "" + +#: git-submodule.sh:572 +#, sh-format +msgid "Submodule path '$path': merged in '$sha1'" +msgstr "" + +#: git-submodule.sh:577 +#, sh-format +msgid "Unable to checkout '$sha1' in submodule path '$path'" +msgstr "" + +#: git-submodule.sh:578 +#, sh-format +msgid "Submodule path '$path': checked out '$sha1'" +msgstr "" + +#: git-submodule.sh:600 git-submodule.sh:923 +#, sh-format +msgid "Failed to recurse into submodule path '$path'" +msgstr "" + +#: git-submodule.sh:708 +msgid "--" +msgstr "" + +#: git-submodule.sh:766 +#, sh-format +msgid " Warn: $name doesn't contain commit $sha1_src" +msgstr "" + +#: git-submodule.sh:769 +#, sh-format +msgid " Warn: $name doesn't contain commit $sha1_dst" +msgstr "" + +#: git-submodule.sh:772 +#, sh-format +msgid " Warn: $name doesn't contain commits $sha1_src and $sha1_dst" +msgstr "" + +#: git-submodule.sh:797 +msgid "blob" +msgstr "" + +#: git-submodule.sh:798 +msgid "submodule" +msgstr "" + +#: git-submodule.sh:969 +#, sh-format +msgid "Synchronizing submodule url for '$name'" +msgstr "" diff --git a/po/de.po b/po/de.po new file mode 100644 index 0000000..a43f646 --- /dev/null +++ b/po/de.po @@ -0,0 +1,3825 @@ +# German translations for Git. +# Copyright (C) 2010-2012 Ralf Thielow <ralf.thielow@googlemail.com> +# This file is distributed under the same license as the Git package. +# Ralf Thielow <ralf.thielow@googlemail.com>, 2010, 2011, 2012. +# +msgid "" +msgstr "" +"Project-Id-Version: git 1.7.10\n" +"Report-Msgid-Bugs-To: Git Mailing List <git@vger.kernel.org>\n" +"POT-Creation-Date: 2012-04-28 20:17+0800\n" +"PO-Revision-Date: 2012-03-28 18:46+0200\n" +"Last-Translator: Ralf Thielow <ralf.thielow@googlemail.com>\n" +"Language-Team: German\n" +"Language: de\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=2; plural=(n != 1);\n" + +#: advice.c:40 +#, c-format +msgid "hint: %.*s\n" +msgstr "Hinweis: %.*s\n" + +#. +#. * Message used both when 'git commit' fails and when +#. * other commands doing a merge do. +#. +#: advice.c:70 +msgid "" +"Fix them up in the work tree,\n" +"and then use 'git add/rm <file>' as\n" +"appropriate to mark resolution and make a commit,\n" +"or use 'git commit -a'." +msgstr "" +"Korrigiere dies im Arbeitsbaum,\n" +"und benutze dann 'git add/rm <Datei>' wie\n" +"vorgesehen, um die Auflösung zu markieren und dann einzutragen,\n" +"oder benutze 'git commit -a'." + +#: commit.c:48 +#, c-format +msgid "could not parse %s" +msgstr "konnte %s nicht parsen" + +#: commit.c:50 +#, c-format +msgid "%s %s is not a commit!" +msgstr "%s %s ist keine Version!" + +#: compat/obstack.c:406 compat/obstack.c:408 +msgid "memory exhausted" +msgstr "Speicher verbraucht" + +#: connected.c:39 +msgid "Could not run 'git rev-list'" +msgstr "'git rev-list' konnte nicht ausgeführt werden" + +#: connected.c:48 +#, c-format +msgid "failed write to rev-list: %s" +msgstr "Fehler beim Schreiben nach rev-list: %s" + +#: connected.c:56 +#, c-format +msgid "failed to close rev-list's stdin: %s" +msgstr "Fehler beim Schließen von rev-list's Standard-Eingabe: %s" + +#: diff.c:105 +#, c-format +msgid " Failed to parse dirstat cut-off percentage '%.*s'\n" +msgstr "" +" Fehler beim Parsen des abgeschnittenen \"dirstat\" Prozentsatzes '%.*s'\n" + +#: diff.c:110 +#, c-format +msgid " Unknown dirstat parameter '%.*s'\n" +msgstr " Unbekannter \"dirstat\" Parameter '%.*s'\n" + +#: diff.c:210 +#, c-format +msgid "" +"Found errors in 'diff.dirstat' config variable:\n" +"%s" +msgstr "" +"Fehler in 'diff.dirstat' Konfigurationsvariable gefunden:\n" +"%s" + +#: diff.c:1400 +msgid " 0 files changed\n" +msgstr " 0 Dateien geändert\n" + +#: diff.c:1404 +#, c-format +msgid " %d file changed" +msgid_plural " %d files changed" +msgstr[0] " %d Datei geändert" +msgstr[1] " %d Dateien geändert" + +#: diff.c:1421 +#, c-format +msgid ", %d insertion(+)" +msgid_plural ", %d insertions(+)" +msgstr[0] ", %d Zeile hinzugefügt(+)" +msgstr[1] ", %d Zeilen hinzugefügt(+)" + +#: diff.c:1432 +#, c-format +msgid ", %d deletion(-)" +msgid_plural ", %d deletions(-)" +msgstr[0] ", %d Zeile entfernt(-)" +msgstr[1] ", %d Zeilen entfernt(-)" + +#: diff.c:3435 +#, c-format +msgid "" +"Failed to parse --dirstat/-X option parameter:\n" +"%s" +msgstr "" +"Fehler beim Parsen des --dirstat/-X Optionsparameters:\n" +"%s" + +#: gpg-interface.c:59 +msgid "could not run gpg." +msgstr "gpg konnte nicht ausgeführt werden" + +#: gpg-interface.c:71 +msgid "gpg did not accept the data" +msgstr "gpg hat die Daten nicht akzeptiert" + +#: gpg-interface.c:82 +msgid "gpg failed to sign the data" +msgstr "gpg beim Signieren der Daten fehlgeschlagen" + +#: grep.c:1280 +#, c-format +msgid "'%s': unable to read %s" +msgstr "'%s': konnte nicht lesen %s" + +#: grep.c:1297 +#, c-format +msgid "'%s': %s" +msgstr "'%s': %s" + +#: grep.c:1308 +#, c-format +msgid "'%s': short read %s" +msgstr "'%s': kurz gelesen %s" + +#: help.c:287 +#, c-format +msgid "" +"'%s' appears to be a git command, but we were not\n" +"able to execute it. Maybe git-%s is broken?" +msgstr "" +"'%s' scheint ein git-Kommando zu sein, konnte aber\n" +"nicht ausgeführt werden. Vielleicht ist git-%s fehlerhaft?" + +#: remote.c:1607 +#, c-format +msgid "Your branch is ahead of '%s' by %d commit.\n" +msgid_plural "Your branch is ahead of '%s' by %d commits.\n" +msgstr[0] "Dein Zweig ist vor '%s' um %d Version.\n" +msgstr[1] "Dein Zweig ist vor '%s' um %d Versionen.\n" + +#: remote.c:1613 +#, c-format +msgid "Your branch is behind '%s' by %d commit, and can be fast-forwarded.\n" +msgid_plural "" +"Your branch is behind '%s' by %d commits, and can be fast-forwarded.\n" +msgstr[0] "" +"Dein Zweig ist hinter '%s' um %d Version, und kann vorgespult werden.\n" +msgstr[1] "" +"Dein Zweig ist hinter '%s' um %d Versionen, und kann vorgespult werden.\n" + +#: remote.c:1621 +#, c-format +msgid "" +"Your branch and '%s' have diverged,\n" +"and have %d and %d different commit each, respectively.\n" +msgid_plural "" +"Your branch and '%s' have diverged,\n" +"and have %d and %d different commits each, respectively.\n" +msgstr[0] "" +"Dein Zweig und '%s' sind divergiert,\n" +"und haben jeweils %d und %d unterschiedliche Versionen.\n" +msgstr[1] "" +"Dein Zweig und '%s' sind divergiert,\n" +"und haben jeweils %d und %d unterschiedliche Versionen.\n" + +#: sequencer.c:120 builtin/merge.c:865 builtin/merge.c:978 +#: builtin/merge.c:1088 builtin/merge.c:1098 +#, c-format +msgid "Could not open '%s' for writing" +msgstr "Konnte '%s' nicht zum Schreiben öffnen." + +#: sequencer.c:122 builtin/merge.c:333 builtin/merge.c:868 +#: builtin/merge.c:1090 builtin/merge.c:1103 +#, c-format +msgid "Could not write to '%s'" +msgstr "Konnte nicht nach '%s' schreiben." + +#: sequencer.c:143 +msgid "" +"after resolving the conflicts, mark the corrected paths\n" +"with 'git add <paths>' or 'git rm <paths>'" +msgstr "" +"nach Auflösung der Konflikte, markiere die korrigierten Pfade\n" +"mit 'git add <Pfade>' oder 'git rm <Pfade>'" + +#: sequencer.c:146 +msgid "" +"after resolving the conflicts, mark the corrected paths\n" +"with 'git add <paths>' or 'git rm <paths>'\n" +"and commit the result with 'git commit'" +msgstr "" +"nach Auflösung der Konflikte, markiere die korrigierten Pfade\n" +"mit 'git add <Pfade>' oder 'git rm <Pfade>'und trage das Ergebnis ein mit " +"'git commit'" + +#: sequencer.c:159 sequencer.c:685 sequencer.c:768 +#, c-format +msgid "Could not write to %s" +msgstr "Konnte nicht nach %s schreiben" + +#: sequencer.c:162 +#, c-format +msgid "Error wrapping up %s" +msgstr "Fehler bei Nachbereitung von %s" + +#: sequencer.c:177 +msgid "Your local changes would be overwritten by cherry-pick." +msgstr "" +"Deine lokalen Änderungen würden von \"cherry-pick\" überschrieben werden." + +#: sequencer.c:179 +msgid "Your local changes would be overwritten by revert." +msgstr "Deine lokalen Änderungen würden von \"revert\" überschrieben werden." + +#: sequencer.c:182 +msgid "Commit your changes or stash them to proceed." +msgstr "Trage deine Änderungen ein oder benutze \"stash\" um fortzufahren." + +#. TRANSLATORS: %s will be "revert" or "cherry-pick" +#: sequencer.c:232 +#, c-format +msgid "%s: Unable to write new index file" +msgstr "%s: Konnte neue Bereitstellungsdatei nicht schreiben" + +#: sequencer.c:298 +msgid "Your index file is unmerged." +msgstr "Deine Bereitstellungsdatei ist nicht zusammengeführt." + +#: sequencer.c:301 +msgid "You do not have a valid HEAD" +msgstr "Du hast keine gültige Zweigspitze (HEAD)" + +#: sequencer.c:316 +#, c-format +msgid "Commit %s is a merge but no -m option was given." +msgstr "" +"Version %s ist eine Zusammenführung, aber es wurde keine Option -m angegeben." + +#: sequencer.c:324 +#, c-format +msgid "Commit %s does not have parent %d" +msgstr "Version %s hat keinen Elternteil %d" + +#: sequencer.c:328 +#, c-format +msgid "Mainline was specified but commit %s is not a merge." +msgstr "" +"Hauptlinie wurde spezifiziert, aber Version %s ist keine Zusammenführung." + +#. TRANSLATORS: The first %s will be "revert" or +#. "cherry-pick", the second %s a SHA1 +#: sequencer.c:339 +#, c-format +msgid "%s: cannot parse parent commit %s" +msgstr "%s: kann Elternversion %s nicht parsen" + +#: sequencer.c:343 +#, c-format +msgid "Cannot get commit message for %s" +msgstr "Kann keine Versionsbeschreibung für %s bekommen" + +#: sequencer.c:427 +#, c-format +msgid "could not revert %s... %s" +msgstr "Konnte %s nicht zurücksetzen... %s" + +#: sequencer.c:428 +#, c-format +msgid "could not apply %s... %s" +msgstr "Konnte %s nicht anwenden... %s" + +#: sequencer.c:450 sequencer.c:909 builtin/log.c:289 builtin/log.c:719 +#: builtin/log.c:1335 builtin/log.c:1554 builtin/merge.c:347 +#: builtin/shortlog.c:181 +msgid "revision walk setup failed" +msgstr "Einrichtung des Revisionsgangs fehlgeschlagen" + +#: sequencer.c:453 +msgid "empty commit set passed" +msgstr "leere Menge von Versionen übergeben" + +#: sequencer.c:461 +#, c-format +msgid "git %s: failed to read the index" +msgstr "git %s: Fehler beim Lesen der Bereitstellung" + +#: sequencer.c:466 +#, c-format +msgid "git %s: failed to refresh the index" +msgstr "git %s: Fehler beim Aktualisieren der Bereitstellung" + +#: sequencer.c:551 +#, c-format +msgid "Cannot %s during a %s" +msgstr "Kann %s nicht während eines %s durchführen" + +#: sequencer.c:573 +#, c-format +msgid "Could not parse line %d." +msgstr "Konnte Zeile %d nicht parsen." + +#: sequencer.c:578 +msgid "No commits parsed." +msgstr "Keine Versionen geparst." + +#: sequencer.c:591 +#, c-format +msgid "Could not open %s" +msgstr "%s konnte nicht geöffnet werden." + +#: sequencer.c:595 +#, c-format +msgid "Could not read %s." +msgstr "%s konnte nicht gelesen werden." + +#: sequencer.c:602 +#, c-format +msgid "Unusable instruction sheet: %s" +msgstr "Unbenutzbares Instruktionsblatt: %s" + +#: sequencer.c:630 +#, c-format +msgid "Invalid key: %s" +msgstr "Ungültiger Schlüssel: %s" + +#: sequencer.c:633 +#, c-format +msgid "Invalid value for %s: %s" +msgstr "Ungültiger Wert für %s: %s" + +#: sequencer.c:645 +#, c-format +msgid "Malformed options sheet: %s" +msgstr "Fehlerhaftes Optionsblatt: %s" + +#: sequencer.c:666 +msgid "a cherry-pick or revert is already in progress" +msgstr "\"cherry-pick\" oder \"revert\" wird bereits ausgeführt" + +#: sequencer.c:667 +msgid "try \"git cherry-pick (--continue | --quit | --abort)\"" +msgstr "versuche \"git cherry-pick (--continue | --quit | --abort)\"" + +#: sequencer.c:671 +#, c-format +msgid "Could not create sequencer directory %s" +msgstr "Konnte \"sequencer\"-Verzeichnis %s nicht erstellen" + +#: sequencer.c:687 sequencer.c:772 +#, c-format +msgid "Error wrapping up %s." +msgstr "Fehler beim Einpacken von %s." + +#: sequencer.c:706 sequencer.c:840 +msgid "no cherry-pick or revert in progress" +msgstr "kein \"cherry-pick\" oder \"revert\" in Ausführung" + +#: sequencer.c:708 +msgid "cannot resolve HEAD" +msgstr "kann Zweigspitze (HEAD) nicht auflösen" + +#: sequencer.c:710 +msgid "cannot abort from a branch yet to be born" +msgstr "kann nicht von einem Zweig abbrechen, der noch geboren wird" + +#: sequencer.c:732 +#, c-format +msgid "cannot open %s: %s" +msgstr "Kann %s nicht öffnen: %s" + +#: sequencer.c:735 +#, c-format +msgid "cannot read %s: %s" +msgstr "Kann %s nicht lesen: %s" + +#: sequencer.c:736 +msgid "unexpected end of file" +msgstr "Unerwartetes Dateiende" + +#: sequencer.c:742 +#, c-format +msgid "stored pre-cherry-pick HEAD file '%s' is corrupt" +msgstr "" +"gespeicherte \"pre-cherry-pick\" Datei der Zweigspitze (HEAD) '%s' ist " +"beschädigt" + +#: sequencer.c:765 +#, c-format +msgid "Could not format %s." +msgstr "Konnte %s nicht formatieren." + +#: sequencer.c:927 +msgid "Can't revert as initial commit" +msgstr "Kann nicht zu initialer Version zurücksetzen." + +#: sequencer.c:928 +msgid "Can't cherry-pick into empty head" +msgstr "Kann \"cherry-pick\" nicht in einem leerem Kopf ausführen." + +#: sha1_name.c:864 +msgid "HEAD does not point to a branch" +msgstr "Zweigspitze (HEAD) zeigt auf keinen Zweig" + +#: sha1_name.c:867 +#, c-format +msgid "No such branch: '%s'" +msgstr "Kein solcher Zweig '%s'" + +#: sha1_name.c:869 +#, c-format +msgid "No upstream configured for branch '%s'" +msgstr "Kein entferntes Projektarchiv für Zweig '%s' konfiguriert." + +#: sha1_name.c:872 +#, c-format +msgid "Upstream branch '%s' not stored as a remote-tracking branch" +msgstr "Zweig '%s' des entfernten Projektarchivs ist nicht als entfernter " +"Übernahmezweig gespeichert" + +#: wt-status.c:134 +msgid "Unmerged paths:" +msgstr "Nicht zusammengeführte Pfade:" + +#: wt-status.c:140 wt-status.c:157 +#, c-format +msgid " (use \"git reset %s <file>...\" to unstage)" +msgstr "" +" (benutze \"git reset %s <Datei>...\" zum Herausnehmen aus der " +"Bereitstellung)" + +#: wt-status.c:142 wt-status.c:159 +msgid " (use \"git rm --cached <file>...\" to unstage)" +msgstr "" +" (benutze \"git rm --cached <Datei>...\" zum Herausnehmen aus der " +"Bereitstellung)" + +#: wt-status.c:143 +msgid " (use \"git add/rm <file>...\" as appropriate to mark resolution)" +msgstr "" +" (benutze \"git add/rm <Datei>...\" wie vorgesehen, um die Auflösung zu " +"markieren)" + +#: wt-status.c:151 +msgid "Changes to be committed:" +msgstr "zum Eintragen bereitgestellte Änderungen:" + +#: wt-status.c:169 +msgid "Changes not staged for commit:" +msgstr "Änderungen, die nicht zum Eintragen bereitgestellt sind:" + +#: wt-status.c:173 +msgid " (use \"git add <file>...\" to update what will be committed)" +msgstr " (benutze \"git add <Datei>...\" zur Aktualisierung der Eintragung)" + +#: wt-status.c:175 +msgid " (use \"git add/rm <file>...\" to update what will be committed)" +msgstr "" +" (benutze \"git add/rm <Datei>...\" zur Aktualisierung der Eintragung)" + +#: wt-status.c:176 +msgid "" +" (use \"git checkout -- <file>...\" to discard changes in working directory)" +msgstr "" +" (benutze \"git checkout -- <Datei>...\" um die Änderungen im " +"Arbeitsverzeichnis zu verwerfen)" + +#: wt-status.c:178 +msgid " (commit or discard the untracked or modified content in submodules)" +msgstr "" +" (trage ein oder verwerfe den ungefolgten oder geänderten Inhalt in den " +"Unterprojekten)" + +#: wt-status.c:187 +#, c-format +msgid "%s files:" +msgstr "%s Dateien:" + +#: wt-status.c:190 +#, c-format +msgid " (use \"git %s <file>...\" to include in what will be committed)" +msgstr " (benutze \"git %s <Datei>...\" zum Einfügen in die Eintragung)" + +#: wt-status.c:207 +msgid "bug" +msgstr "Fehler" + +#: wt-status.c:212 +msgid "both deleted:" +msgstr "beide gelöscht:" + +#: wt-status.c:213 +msgid "added by us:" +msgstr "von uns hinzugefügt:" + +#: wt-status.c:214 +msgid "deleted by them:" +msgstr "von denen gelöscht:" + +#: wt-status.c:215 +msgid "added by them:" +msgstr "von denen hinzugefügt:" + +#: wt-status.c:216 +msgid "deleted by us:" +msgstr "von uns gelöscht:" + +#: wt-status.c:217 +msgid "both added:" +msgstr "von beiden hinzugefügt:" + +#: wt-status.c:218 +msgid "both modified:" +msgstr "von beiden geändert:" + +#: wt-status.c:248 +msgid "new commits, " +msgstr "neue Versionen, " + +#: wt-status.c:250 +msgid "modified content, " +msgstr "geänderter Inhalt, " + +#: wt-status.c:252 +msgid "untracked content, " +msgstr "unverfolgter Inhalt, " + +#: wt-status.c:266 +#, c-format +msgid "new file: %s" +msgstr "neue Datei: %s" + +#: wt-status.c:269 +#, c-format +msgid "copied: %s -> %s" +msgstr "kopiert: %s -> %s" + +#: wt-status.c:272 +#, c-format +msgid "deleted: %s" +msgstr "gelöscht: %s" + +#: wt-status.c:275 +#, c-format +msgid "modified: %s" +msgstr "geändert: %s" + +#: wt-status.c:278 +#, c-format +msgid "renamed: %s -> %s" +msgstr "umbenannt: %s -> %s" + +#: wt-status.c:281 +#, c-format +msgid "typechange: %s" +msgstr "Typänderung: %s" + +#: wt-status.c:284 +#, c-format +msgid "unknown: %s" +msgstr "unbekannt: %s" + +#: wt-status.c:287 +#, c-format +msgid "unmerged: %s" +msgstr "nicht zusammengeführt: %s" + +#: wt-status.c:290 +#, c-format +msgid "bug: unhandled diff status %c" +msgstr "Fehler: unbehandelter Differenz-Status %c" + +#: wt-status.c:713 +msgid "On branch " +msgstr "Auf Zweig " + +#: wt-status.c:720 +msgid "Not currently on any branch." +msgstr "Im Moment auf keinem Zweig." + +#: wt-status.c:731 +msgid "Initial commit" +msgstr "Initiale Version" + +#: wt-status.c:745 +msgid "Untracked" +msgstr "Unverfolgte" + +#: wt-status.c:747 +msgid "Ignored" +msgstr "Ignorierte" + +#: wt-status.c:749 +#, c-format +msgid "Untracked files not listed%s" +msgstr "Unverfolgte Dateien nicht aufgelistet%s" + +#: wt-status.c:751 +msgid " (use -u option to show untracked files)" +msgstr " (benutze die Option -u um unverfolgte Dateien anzuzeigen)" + +#: wt-status.c:757 +msgid "No changes" +msgstr "Keine Änderungen" + +#: wt-status.c:761 +#, c-format +msgid "no changes added to commit%s\n" +msgstr "keine Änderungen zum Eintragen hinzugefügt%s\n" + +#: wt-status.c:763 +msgid " (use \"git add\" and/or \"git commit -a\")" +msgstr " (benutze \"git add\" und/oder \"git commit -a\")" + +#: wt-status.c:765 +#, c-format +msgid "nothing added to commit but untracked files present%s\n" +msgstr "nichts zum Eintragen hinzugefügt, aber es gibt unverfolgte Dateien%s\n" + +#: wt-status.c:767 +msgid " (use \"git add\" to track)" +msgstr " (benutze \"git add\" zum Verfolgen)" + +#: wt-status.c:769 wt-status.c:772 wt-status.c:775 +#, c-format +msgid "nothing to commit%s\n" +msgstr "nichts zum Eintragen%s\n" + +#: wt-status.c:770 +msgid " (create/copy files and use \"git add\" to track)" +msgstr " (Erstelle/Kopiere Dateien und benutze \"git add\" zum Verfolgen)" + +#: wt-status.c:773 +msgid " (use -u to show untracked files)" +msgstr " (benutze -u um unverfolgte Dateien anzuzeigen)" + +#: wt-status.c:776 +msgid " (working directory clean)" +msgstr " (Arbeitsverzeichnis sauber)" + +#: wt-status.c:884 +msgid "HEAD (no branch)" +msgstr "HEAD (kein Zweig)" + +#: wt-status.c:890 +msgid "Initial commit on " +msgstr "Initiale Version auf " + +#: wt-status.c:905 +msgid "behind " +msgstr "hinter " + +#: wt-status.c:908 wt-status.c:911 +msgid "ahead " +msgstr "über " + +#: wt-status.c:913 +msgid ", behind " +msgstr ", hinter " + +#: builtin/add.c:62 +#, c-format +msgid "unexpected diff status %c" +msgstr "unerwarteter Differenz-Status %c" + +#: builtin/add.c:67 builtin/commit.c:298 +msgid "updating files failed" +msgstr "Aktualisierung von Dateien fehlgeschlagen" + +#: builtin/add.c:77 +#, c-format +msgid "remove '%s'\n" +msgstr "entferne '%s'\n" + +#: builtin/add.c:176 +#, c-format +msgid "Path '%s' is in submodule '%.*s'" +msgstr "Pfad '%s' befindet sich in Unterprojekt '%.*s'" + +#: builtin/add.c:192 +msgid "Unstaged changes after refreshing the index:" +msgstr "" +"Nicht bereitgestellte Änderungen nach Aktualisierung der Bereitstellung:" + +#: builtin/add.c:195 builtin/add.c:456 builtin/rm.c:186 +#, c-format +msgid "pathspec '%s' did not match any files" +msgstr "Pfadspezifikation '%s' stimmt mit keinen Dateien überein" + +#: builtin/add.c:209 +#, c-format +msgid "'%s' is beyond a symbolic link" +msgstr "'%s' ist über einem symbolischen Link" + +#: builtin/add.c:276 +msgid "Could not read the index" +msgstr "Konnte die Bereitstellung nicht lesen" + +#: builtin/add.c:286 +#, c-format +msgid "Could not open '%s' for writing." +msgstr "Konnte '%s' nicht zum Schreiben öffnen." + +#: builtin/add.c:290 +msgid "Could not write patch" +msgstr "Konnte Patch nicht schreiben" + +#: builtin/add.c:295 +#, c-format +msgid "Could not stat '%s'" +msgstr "Verzeichnis '%s' konnte nicht gelesen werden" + +#: builtin/add.c:297 +msgid "Empty patch. Aborted." +msgstr "Leerer Patch. Abgebrochen." + +#: builtin/add.c:303 +#, c-format +msgid "Could not apply '%s'" +msgstr "Konnte '%s' nicht anwenden." + +#: builtin/add.c:312 +msgid "The following paths are ignored by one of your .gitignore files:\n" +msgstr "" +"Die folgenden Pfade werden durch eine deiner \".gitignore\" Dateien " +"ignoriert:\n" + +#: builtin/add.c:352 +#, c-format +msgid "Use -f if you really want to add them.\n" +msgstr "Verwende -f wenn du diese wirklich hinzufügen möchtest.\n" + +#: builtin/add.c:353 +msgid "no files added" +msgstr "keine Dateien hinzugefügt" + +#: builtin/add.c:359 +msgid "adding files failed" +msgstr "Hinzufügen von Dateien fehlgeschlagen" + +#: builtin/add.c:391 +msgid "-A and -u are mutually incompatible" +msgstr "-A und -u sind zueinander inkompatibel" + +#: builtin/add.c:393 +msgid "Option --ignore-missing can only be used together with --dry-run" +msgstr "" +"Die Option --ignore-missing kann nur zusammen mit --dry-run benutzt werden." + +#: builtin/add.c:413 +#, c-format +msgid "Nothing specified, nothing added.\n" +msgstr "Nichts spezifiziert, nichts hinzugefügt.\n" + +#: builtin/add.c:414 +#, c-format +msgid "Maybe you wanted to say 'git add .'?\n" +msgstr "Wolltest du vieleicht 'git add .' sagen?\n" + +#: builtin/add.c:420 builtin/clean.c:95 builtin/commit.c:358 builtin/mv.c:82 +#: builtin/rm.c:162 +msgid "index file corrupt" +msgstr "Bereitstellungsdatei beschädigt" + +#: builtin/add.c:476 builtin/mv.c:229 builtin/rm.c:260 +msgid "Unable to write new index file" +msgstr "Konnte neue Bereitstellungsdatei nicht schreiben." + +#: builtin/archive.c:17 +#, c-format +msgid "could not create archive file '%s'" +msgstr "Konnte Archiv-Datei '%s' nicht erstellen." + +#: builtin/archive.c:20 +msgid "could not redirect output" +msgstr "Konnte Ausgabe nicht umleiten." + +#: builtin/archive.c:37 +msgid "git archive: Remote with no URL" +msgstr "git archive: Anderes Archiv ohne URL" + +#: builtin/archive.c:58 +msgid "git archive: expected ACK/NAK, got EOF" +msgstr "git archive: habe ACK/NAK erwartet, aber EOF bekommen" + +#: builtin/archive.c:63 +#, c-format +msgid "git archive: NACK %s" +msgstr "git archive: NACK %s" + +#: builtin/archive.c:65 +#, c-format +msgid "remote error: %s" +msgstr "Versandfehler: %s" + +#: builtin/archive.c:66 +msgid "git archive: protocol error" +msgstr "git archive: Protokollfehler" + +#: builtin/archive.c:71 +msgid "git archive: expected a flush" +msgstr "git archive: erwartete eine Spülung (flush)" + +#: builtin/branch.c:137 +#, c-format +msgid "" +"deleting branch '%s' that has been merged to\n" +" '%s', but not yet merged to HEAD." +msgstr "" +"entferne Zweig '%s' der zusammengeführt wurde mit\n" +" '%s', aber noch nicht mit der Zweigspitze (HEAD) zusammengeführt " +"wurde." + +#: builtin/branch.c:141 +#, c-format +msgid "" +"not deleting branch '%s' that is not yet merged to\n" +" '%s', even though it is merged to HEAD." +msgstr "" +"entferne nicht Zweig '%s' der noch nicht zusammengeführt wurde mit\n" +" '%s', obwohl er mit der Zweigspitze (HEAD) zusammengeführt wurde." + +#. TRANSLATORS: This is "remote " in "remote branch '%s' not found" +#: builtin/branch.c:164 +msgid "remote " +msgstr "entfernter " + +#: builtin/branch.c:172 +msgid "cannot use -a with -d" +msgstr "kann -a nicht mit -d benutzen" + +#: builtin/branch.c:178 +msgid "Couldn't look up commit object for HEAD" +msgstr "Konnte Versionsobjekt für Zweigspitze (HEAD) nicht nachschlagen." + +#: builtin/branch.c:183 +#, c-format +msgid "Cannot delete the branch '%s' which you are currently on." +msgstr "Kann Zweig '%s' nicht entfernen auf dem du dich gerade befindest." + +#: builtin/branch.c:193 +#, c-format +msgid "%sbranch '%s' not found." +msgstr "%sZweig '%s' nicht gefunden." + +#: builtin/branch.c:201 +#, c-format +msgid "Couldn't look up commit object for '%s'" +msgstr "Konnte Versionsobjekt für '%s' nicht nachschlagen." + +#: builtin/branch.c:207 +#, c-format +msgid "" +"The branch '%s' is not fully merged.\n" +"If you are sure you want to delete it, run 'git branch -D %s'." +msgstr "" +"Der Zweig '%s' ist nicht vollständig zusammengeführt.\n" +"Wenn du sicher bist diesen Zweig zu entfernen, führe 'git branch -D %s' aus." + +#: builtin/branch.c:215 +#, c-format +msgid "Error deleting %sbranch '%s'" +msgstr "Fehler beim Löschen von %sZweig '%s'" + +#: builtin/branch.c:221 +#, c-format +msgid "Deleted %sbranch %s (was %s).\n" +msgstr "Entferne %sZweig %s (war %s).\n" + +#: builtin/branch.c:226 +msgid "Update of config-file failed" +msgstr "Aktualisierung der Konfigurationsdatei fehlgeschlagen." + +#: builtin/branch.c:324 +#, c-format +msgid "branch '%s' does not point at a commit" +msgstr "Zweig '%s' zeigt auf keine Version" + +#: builtin/branch.c:396 +#, c-format +msgid "behind %d] " +msgstr "hinter %d] " + +#: builtin/branch.c:398 +#, c-format +msgid "ahead %d] " +msgstr "vor %d] " + +#: builtin/branch.c:400 +#, c-format +msgid "ahead %d, behind %d] " +msgstr "vor %d, hinter %d] " + +#: builtin/branch.c:503 +msgid "(no branch)" +msgstr "(kein Zweig)" + +#: builtin/branch.c:568 +msgid "some refs could not be read" +msgstr "einige Referenzen konnten nicht gelesen werden" + +#: builtin/branch.c:581 +msgid "cannot rename the current branch while not on any." +msgstr "" +"Kann aktuellen Zweig nicht umbennen, solange du dich auf keinem befindest." + +#: builtin/branch.c:591 +#, c-format +msgid "Invalid branch name: '%s'" +msgstr "Ungültiger Zweig-Name: '%s'" + +#: builtin/branch.c:606 +msgid "Branch rename failed" +msgstr "Umbenennung des Zweiges fehlgeschlagen" + +#: builtin/branch.c:610 +#, c-format +msgid "Renamed a misnamed branch '%s' away" +msgstr "falsch benannten Zweig '%s' umbenannt" + +#: builtin/branch.c:614 +#, c-format +msgid "Branch renamed to %s, but HEAD is not updated!" +msgstr "Zweig umbenannt zu %s, aber Zweigspitze (HEAD) ist nicht aktualisiert!" + +#: builtin/branch.c:621 +msgid "Branch is renamed, but update of config-file failed" +msgstr "" +"Zweig ist umbenannt, aber die Aktualisierung der Konfigurationsdatei ist " +"fehlgeschlagen." + +#: builtin/branch.c:636 +#, c-format +msgid "malformed object name %s" +msgstr "Missgebildeter Objektname %s" + +#: builtin/branch.c:660 +#, c-format +msgid "could not write branch description template: %s\n" +msgstr "Konnte Beschreibungsvorlage für Zweig nicht schreiben: %s\n" + +#: builtin/branch.c:750 +msgid "Failed to resolve HEAD as a valid ref." +msgstr "Zweigspitze (HEAD) konnte nicht als gültige Referenz aufgelöst werden." + +#: builtin/branch.c:755 builtin/clone.c:558 +msgid "HEAD not found below refs/heads!" +msgstr "Zweigspitze (HEAD) wurde nicht unter \"refs/heads\" gefunden!" + +#: builtin/branch.c:813 +msgid "-a and -r options to 'git branch' do not make sense with a branch name" +msgstr "" +"Die Optionen -a und -r bei 'git branch' machen mit einem Zweignamen keinen " +"Sinn." + +#: builtin/bundle.c:47 +#, c-format +msgid "%s is okay\n" +msgstr "%s ist in Ordnung\n" + +#: builtin/bundle.c:56 +msgid "Need a repository to create a bundle." +msgstr "Um ein Paket zu erstellen wird ein Projektarchiv benötigt." + +#: builtin/bundle.c:60 +msgid "Need a repository to unbundle." +msgstr "Zum Zerlegen wird ein Projektarchiv benötigt." + +#: builtin/checkout.c:113 builtin/checkout.c:146 +#, c-format +msgid "path '%s' does not have our version" +msgstr "Pfad '%s' hat nicht unsere Version." + +#: builtin/checkout.c:115 builtin/checkout.c:148 +#, c-format +msgid "path '%s' does not have their version" +msgstr "Pfad '%s' hat nicht deren Version." + +#: builtin/checkout.c:131 +#, c-format +msgid "path '%s' does not have all necessary versions" +msgstr "Pfad '%s' hat nicht alle notwendigen Versionen." + +#: builtin/checkout.c:175 +#, c-format +msgid "path '%s' does not have necessary versions" +msgstr "Pfad '%s' hat nicht die notwendigen Versionen." + +#: builtin/checkout.c:192 +#, c-format +msgid "path '%s': cannot merge" +msgstr "Pfad '%s': kann nicht zusammenführen" + +#: builtin/checkout.c:209 +#, c-format +msgid "Unable to add merge result for '%s'" +msgstr "Konnte Ergebnis der Zusammenführung von '%s' nicht hinzufügen." + +#: builtin/checkout.c:212 builtin/reset.c:158 +#, c-format +msgid "make_cache_entry failed for path '%s'" +msgstr "make_cache_entry für Pfad '%s' fehlgeschlagen" + +#: builtin/checkout.c:234 builtin/checkout.c:392 +msgid "corrupt index file" +msgstr "beschädigte Bereitstellungsdatei" + +#: builtin/checkout.c:264 builtin/checkout.c:271 +#, c-format +msgid "path '%s' is unmerged" +msgstr "Pfad '%s' ist nicht zusammengeführt." + +#: builtin/checkout.c:302 builtin/checkout.c:498 builtin/clone.c:583 +#: builtin/merge.c:812 +msgid "unable to write new index file" +msgstr "Konnte neue Bereitstellungsdatei nicht schreiben." + +#: builtin/checkout.c:319 builtin/diff.c:302 builtin/merge.c:408 +msgid "diff_setup_done failed" +msgstr "diff_setup_done fehlgeschlagen" + +#: builtin/checkout.c:414 +msgid "you need to resolve your current index first" +msgstr "Du musst zuerst deine aktuelle Bereitstellung auflösen." + +#: builtin/checkout.c:533 +#, c-format +msgid "Can not do reflog for '%s'\n" +msgstr "Konnte \"reflog\" für '%s' nicht durchführen\n" + +#: builtin/checkout.c:566 +msgid "HEAD is now at" +msgstr "Zweigspitze (HEAD) ist jetzt bei" + +#: builtin/checkout.c:573 +#, c-format +msgid "Reset branch '%s'\n" +msgstr "Setze Zweig '%s' zurück\n" + +#: builtin/checkout.c:576 +#, c-format +msgid "Already on '%s'\n" +msgstr "Bereits auf '%s'\n" + +#: builtin/checkout.c:580 +#, c-format +msgid "Switched to and reset branch '%s'\n" +msgstr "Gewechselt zu zurückgesetztem Zweig '%s'\n" + +#: builtin/checkout.c:582 +#, c-format +msgid "Switched to a new branch '%s'\n" +msgstr "Gewechselt zu einem neuen Zweig '%s'\n" + +#: builtin/checkout.c:584 +#, c-format +msgid "Switched to branch '%s'\n" +msgstr "Gewechselt zu Zweig '%s'\n" + +#: builtin/checkout.c:640 +#, c-format +msgid " ... and %d more.\n" +msgstr " ... und %d weitere.\n" + +#. The singular version +#: builtin/checkout.c:646 +#, c-format +msgid "" +"Warning: you are leaving %d commit behind, not connected to\n" +"any of your branches:\n" +"\n" +"%s\n" +msgid_plural "" +"Warning: you are leaving %d commits behind, not connected to\n" +"any of your branches:\n" +"\n" +"%s\n" +msgstr[0] "" +"Warnung: Du verlässt %d Version zurückliegend, nicht verbunden zu\n" +"einem deiner Zweige:\n" +"\n" +"%s\n" +msgstr[1] "" +"Warnung: Du verlässt %d Versionen zurückliegend, nicht verbunden zu\n" +"einem deiner Zweige:\n" +"\n" +"%s\n" + +#: builtin/checkout.c:664 +#, c-format +msgid "" +"If you want to keep them by creating a new branch, this may be a good time\n" +"to do so with:\n" +"\n" +" git branch new_branch_name %s\n" +"\n" +msgstr "" +"Wenn du diese durch einen neuen Zweig behalten möchtest, dann könnte jetzt\n" +"ein guter Zeitpunkt sein dies zu tun mit:\n" +"\n" +" git branch neuer_zweig_name %s\n" +"\n" + +#: builtin/checkout.c:693 +msgid "internal error in revision walk" +msgstr "interner Fehler im Revisionsgang" + +#: builtin/checkout.c:697 +msgid "Previous HEAD position was" +msgstr "Vorherige Position der Zweigspitze (HEAD) war" + +#: builtin/checkout.c:723 +msgid "You are on a branch yet to be born" +msgstr "Du bist auf einem Zweig, der noch nicht geboren wurde." + +#. case (1) +#: builtin/checkout.c:854 +#, c-format +msgid "invalid reference: %s" +msgstr "Ungültige Referenz: %s" + +#. case (1): want a tree +#: builtin/checkout.c:893 +#, c-format +msgid "reference is not a tree: %s" +msgstr "Referenz ist kein Baum: %s" + +#: builtin/checkout.c:973 +msgid "-B cannot be used with -b" +msgstr "-B kann nicht mit -b benutzt werden" + +#: builtin/checkout.c:982 +msgid "--patch is incompatible with all other options" +msgstr "--patch ist inkompatibel mit allen anderen Optionen" + +#: builtin/checkout.c:985 +msgid "--detach cannot be used with -b/-B/--orphan" +msgstr "--detach kann nicht mit -b/-B/--orphan benutzt werden" + +#: builtin/checkout.c:987 +msgid "--detach cannot be used with -t" +msgstr "--detach kann nicht mit -t benutzt werden" + +#: builtin/checkout.c:993 +msgid "--track needs a branch name" +msgstr "--track benötigt einen Zweignamen" + +#: builtin/checkout.c:1000 +msgid "Missing branch name; try -b" +msgstr "Vermisse Zweignamen; versuche -b" + +#: builtin/checkout.c:1006 +msgid "--orphan and -b|-B are mutually exclusive" +msgstr "--orphan und -b|-B sind gegenseitig exklusiv" + +#: builtin/checkout.c:1008 +msgid "--orphan cannot be used with -t" +msgstr "--orphan kann nicht mit -t benutzt werden" + +#: builtin/checkout.c:1018 +msgid "git checkout: -f and -m are incompatible" +msgstr "git checkout: -f und -m sind inkompatibel" + +#: builtin/checkout.c:1052 +msgid "invalid path specification" +msgstr "ungültige Pfadspezifikation" + +#: builtin/checkout.c:1060 +#, c-format +msgid "" +"git checkout: updating paths is incompatible with switching branches.\n" +"Did you intend to checkout '%s' which can not be resolved as commit?" +msgstr "" +"git checkout: Aktualisierung der Pfade ist inkompatibel mit dem Wechsel von " +"Zweigen.\n" +"Hast du beabsichtigt '%s' auszuchecken, welcher nicht als Version aufgelöst " +"werden kann?" + +#: builtin/checkout.c:1062 +msgid "git checkout: updating paths is incompatible with switching branches." +msgstr "" +"git checkout: Aktualisierung von Pfaden ist inkompatibel mit dem Wechsel von " +"Zweigen." + +#: builtin/checkout.c:1067 +msgid "git checkout: --detach does not take a path argument" +msgstr "git checkout: --detach nimmt kein Pfad-Argument" + +#: builtin/checkout.c:1070 +msgid "" +"git checkout: --ours/--theirs, --force and --merge are incompatible when\n" +"checking out of the index." +msgstr "" +"git checkout: --ours/--theirs, --force and --merge sind inkompatibel wenn\n" +"du außerhalb der Bereitstellung auscheckst." + +#: builtin/checkout.c:1089 +msgid "Cannot switch branch to a non-commit." +msgstr "Kann Zweig nur zu einer Version wechseln." + +#: builtin/checkout.c:1092 +msgid "--ours/--theirs is incompatible with switching branches." +msgstr "--ours/--theirs ist inkompatibel mit den Wechseln von Zweigen." + +#: builtin/clean.c:78 +msgid "-x and -X cannot be used together" +msgstr "-x und -X können nicht zusammen benutzt werden" + +#: builtin/clean.c:82 +msgid "" +"clean.requireForce set to true and neither -n nor -f given; refusing to clean" +msgstr "" +"clean.requireForce auf \"true\" gesetzt und weder -n noch -f gegeben; " +"Ablehnung der Reinigung" + +#: builtin/clean.c:85 +msgid "" +"clean.requireForce defaults to true and neither -n nor -f given; refusing to " +"clean" +msgstr "" +"clean.requireForce standardmäßig auf \"true\" gesetzt und weder -n noch -f " +"gegeben; Ablehnung der Reinigung" + +#: builtin/clean.c:155 builtin/clean.c:176 +#, c-format +msgid "Would remove %s\n" +msgstr "Würde entfernen %s\n" + +#: builtin/clean.c:159 builtin/clean.c:179 +#, c-format +msgid "Removing %s\n" +msgstr "Entferne %s\n" + +#: builtin/clean.c:162 builtin/clean.c:182 +#, c-format +msgid "failed to remove %s" +msgstr "Fehler beim Entfernen von %s" + +#: builtin/clean.c:166 +#, c-format +msgid "Would not remove %s\n" +msgstr "Würde nicht entfernen %s\n" + +#: builtin/clean.c:168 +#, c-format +msgid "Not removing %s\n" +msgstr "Entferne nicht %s\n" + +#: builtin/clone.c:243 +#, c-format +msgid "reference repository '%s' is not a local directory." +msgstr "Referenziertes Projektarchiv '%s' ist kein lokales Verzeichnis." + +#: builtin/clone.c:302 +#, c-format +msgid "failed to open '%s'" +msgstr "Fehler beim Öffnen von '%s'" + +#: builtin/clone.c:306 +#, c-format +msgid "failed to create directory '%s'" +msgstr "Fehler beim Erstellen von Verzeichnis '%s'" + +#: builtin/clone.c:308 builtin/diff.c:75 +#, c-format +msgid "failed to stat '%s'" +msgstr "'%s' konnte nicht gelesen werden" + +#: builtin/clone.c:310 +#, c-format +msgid "%s exists and is not a directory" +msgstr "%s existiert und ist kein Verzeichnis" + +#: builtin/clone.c:324 +#, c-format +msgid "failed to stat %s\n" +msgstr "%s konnte nicht gelesen werden\n" + +#: builtin/clone.c:341 +#, c-format +msgid "failed to unlink '%s'" +msgstr "Verknüpfung von '%s' konnte nicht aufgehoben werden." + +#: builtin/clone.c:346 +#, c-format +msgid "failed to create link '%s'" +msgstr "Verknüpfung '%s' konnte nicht erstellt werden." + +#: builtin/clone.c:350 +#, c-format +msgid "failed to copy file to '%s'" +msgstr "Datei konnte nicht nach '%s' kopiert werden." + +#: builtin/clone.c:373 +#, c-format +msgid "done.\n" +msgstr "Fertig.\n" + +#: builtin/clone.c:440 +#, c-format +msgid "Could not find remote branch %s to clone." +msgstr "Entfernter Zweig %s konnte nicht zum Klonen gefunden werden." + +#: builtin/clone.c:549 +msgid "remote HEAD refers to nonexistent ref, unable to checkout.\n" +msgstr "" +"Entfernte Zweigspitze (HEAD) bezieht sich auf eine nicht existierende " +"Referenz und kann nicht ausgecheckt werden.\n" + +#: builtin/clone.c:639 +msgid "Too many arguments." +msgstr "Zu viele Argumente." + +#: builtin/clone.c:643 +msgid "You must specify a repository to clone." +msgstr "Du musst ein Projektarchiv zum Klonen spezifizieren." + +#: builtin/clone.c:654 +#, c-format +msgid "--bare and --origin %s options are incompatible." +msgstr "--bare und --origin %s Optionen sind inkompatibel." + +#: builtin/clone.c:668 +#, c-format +msgid "repository '%s' does not exist" +msgstr "Projektarchiv '%s' existiert nicht." + +#: builtin/clone.c:673 +msgid "--depth is ignored in local clones; use file:// instead." +msgstr "--depth wird in lokalen Klonen ignoriert; benutze stattdessen file://." + +#: builtin/clone.c:683 +#, c-format +msgid "destination path '%s' already exists and is not an empty directory." +msgstr "Zielpfad '%s' existiert bereits und ist kein leeres Verzeichnis." + +#: builtin/clone.c:693 +#, c-format +msgid "working tree '%s' already exists." +msgstr "Arbeitsbaum '%s' existiert bereits." + +#: builtin/clone.c:706 builtin/clone.c:720 +#, c-format +msgid "could not create leading directories of '%s'" +msgstr "Konnte führende Verzeichnisse von '%s' nicht erstellen." + +#: builtin/clone.c:709 +#, c-format +msgid "could not create work tree dir '%s'." +msgstr "Konnte Arbeitsverzeichnis '%s' nicht erstellen." + +#: builtin/clone.c:728 +#, c-format +msgid "Cloning into bare repository '%s'...\n" +msgstr "Klone in leeres Projektarchiv '%s'...\n" + +#: builtin/clone.c:730 +#, c-format +msgid "Cloning into '%s'...\n" +msgstr "Klone nach '%s'...\n" + +#: builtin/clone.c:786 +#, c-format +msgid "Don't know how to clone %s" +msgstr "Weiß nicht wie %s zu klonen ist." + +#: builtin/clone.c:835 +#, c-format +msgid "Remote branch %s not found in upstream %s" +msgstr "entfernter Zweig %s nicht im anderen Projektarchiv gefunden %s" + +#: builtin/clone.c:842 +msgid "You appear to have cloned an empty repository." +msgstr "Du scheinst ein leeres Projektarchiv geklont zu haben." + +#: builtin/commit.c:42 +msgid "" +"Your name and email address were configured automatically based\n" +"on your username and hostname. Please check that they are accurate.\n" +"You can suppress this message by setting them explicitly:\n" +"\n" +" git config --global user.name \"Your Name\"\n" +" git config --global user.email you@example.com\n" +"\n" +"After doing this, you may fix the identity used for this commit with:\n" +"\n" +" git commit --amend --reset-author\n" +msgstr "" +"Dein Name und E-Mail Adresse wurden automatisch auf Basis\n" +"deines Benutzer- und Rechnernamens konfiguriert. Bitte prüfe, dass diese\n" +"zutreffend sind. Du kannst diese Meldung unterdrücken, indem du diese\n" +"explizit setzt:\n" +"\n" +" git config --global user.name \"Dein Name\"\n" +" git config --global user.email deine@emailadresse.de\n" +"\n" +"Nachdem du das getan hast, kannst du deine Identität für diese Version " +"ändern mit:\n" +"\n" +" git commit --amend --reset-author\n" + +#: builtin/commit.c:54 +msgid "" +"You asked to amend the most recent commit, but doing so would make\n" +"it empty. You can repeat your command with --allow-empty, or you can\n" +"remove the commit entirely with \"git reset HEAD^\".\n" +msgstr "" +"Du fragtest die jüngste Version nachzubessern, aber das würde diese leer\n" +"machen. Du kannst Dein Kommando mit --allow-empty wiederholen, oder die\n" +"Version mit \"git reset HEAD^\" vollständig entfernen.\n" + +#: builtin/commit.c:59 +msgid "" +"The previous cherry-pick is now empty, possibly due to conflict resolution.\n" +"If you wish to commit it anyway, use:\n" +"\n" +" git commit --allow-empty\n" +"\n" +"Otherwise, please use 'git reset'\n" +msgstr "" +"Der letzte \"cherry-pick\" ist jetzt leer, möglicherweise durch eine " +"Konfliktauflösung.\n" +"Wenn du dies trotzdem eintragen willst, benutze:\n" +"\n" +" git commit --allow-empty\n" +"\n" +"Andernfalls benutze bitte 'git reset'\n" + +#: builtin/commit.c:205 builtin/reset.c:33 +msgid "merge" +msgstr "zusammenführen" + +#: builtin/commit.c:208 +msgid "cherry-pick" +msgstr "cherry-pick" + +#: builtin/commit.c:325 +msgid "failed to unpack HEAD tree object" +msgstr "Fehler beim Entpacken des Baum-Objektes der Zweigspitze (HEAD)." + +#: builtin/commit.c:367 +msgid "unable to create temporary index" +msgstr "Konnte temporäre Bereitstellung nicht erstellen." + +#: builtin/commit.c:373 +msgid "interactive add failed" +msgstr "interaktives Hinzufügen fehlgeschlagen" + +#: builtin/commit.c:406 builtin/commit.c:427 builtin/commit.c:473 +msgid "unable to write new_index file" +msgstr "Konnte new_index Datei nicht schreiben" + +#: builtin/commit.c:457 +#, c-format +msgid "cannot do a partial commit during a %s." +msgstr "Kann keine partielle Eintragung während eines %s durchführen." + +#: builtin/commit.c:466 +msgid "cannot read the index" +msgstr "Kann Bereitstellung nicht lesen" + +#: builtin/commit.c:486 +msgid "unable to write temporary index file" +msgstr "Konnte temporäre Bereitstellungsdatei nicht schreiben." + +#: builtin/commit.c:561 builtin/commit.c:567 +#, c-format +msgid "invalid commit: %s" +msgstr "Ungültige Version: %s" + +#: builtin/commit.c:590 +msgid "malformed --author parameter" +msgstr "Fehlerhafter --author Parameter" + +#: builtin/commit.c:651 +#, c-format +msgid "Malformed ident string: '%s'" +msgstr "Fehlerhafte Identifikations-String: '%s'" + +#: builtin/commit.c:689 builtin/commit.c:722 builtin/commit.c:1033 +#, c-format +msgid "could not lookup commit %s" +msgstr "Konnte Version %s nicht nachschlagen" + +#: builtin/commit.c:701 builtin/shortlog.c:296 +#, c-format +msgid "(reading log message from standard input)\n" +msgstr "(lese Log-Nachricht von Standard-Eingabe)\n" + +#: builtin/commit.c:703 +msgid "could not read log from standard input" +msgstr "Konnte Log nicht von Standard-Eingabe lesen." + +#: builtin/commit.c:707 +#, c-format +msgid "could not read log file '%s'" +msgstr "Konnte Log-Datei '%s' nicht lesen" + +#: builtin/commit.c:713 +msgid "commit has empty message" +msgstr "Version hat eine leere Beschreibung" + +#: builtin/commit.c:729 +msgid "could not read MERGE_MSG" +msgstr "Konnte MERGE_MSG nicht lesen" + +#: builtin/commit.c:733 +msgid "could not read SQUASH_MSG" +msgstr "Konnte SQUASH_MSG nicht lesen" + +#: builtin/commit.c:737 +#, c-format +msgid "could not read '%s'" +msgstr "Konnte '%s' nicht lesen" + +#: builtin/commit.c:765 +#, c-format +msgid "could not open '%s'" +msgstr "Konnte '%s' nicht öffnen" + +#: builtin/commit.c:789 +msgid "could not write commit template" +msgstr "Konnte Versionsvorlage nicht schreiben" + +#: builtin/commit.c:799 +#, c-format +msgid "" +"\n" +"It looks like you may be committing a %s.\n" +"If this is not correct, please remove the file\n" +"\t%s\n" +"and try again.\n" +msgstr "" +"\n" +"Es sieht so aus, als trägst du ein '%s' ein.\n" +"Falls das nicht korrekt ist, entferne bitte die Datei\n" +"\t%s\n" +"und versuche es erneut.\n" + +#: builtin/commit.c:812 +msgid "Please enter the commit message for your changes." +msgstr "Bitte gebe die Versionsbeschreibung für deine Änderungen ein." + +#: builtin/commit.c:815 +msgid "" +" Lines starting\n" +"with '#' will be ignored, and an empty message aborts the commit.\n" +msgstr "" +" Zeilen beginnend\n" +"mit '#' werden ignoriert, und eine leere Versionsbeschreibung bricht die " +"Eintragung ab.\n" + +#: builtin/commit.c:820 +msgid "" +" Lines starting\n" +"with '#' will be kept; you may remove them yourself if you want to.\n" +"An empty message aborts the commit.\n" +msgstr "" +" Zeilen beginnend\n" +"mit '#' werden beibehalten; wenn du möchtest, kannst du diese entfernen.\n" +"Eine leere Versionsbeschreibung bricht die Eintragung ab.\n" + +#: builtin/commit.c:832 +#, c-format +msgid "%sAuthor: %s" +msgstr "%sAutor: %s" + +#: builtin/commit.c:839 +#, c-format +msgid "%sCommitter: %s" +msgstr "%sEintragender: %s" + +#: builtin/commit.c:859 +msgid "Cannot read index" +msgstr "Kann Bereitstellung nicht lesen" + +#: builtin/commit.c:896 +msgid "Error building trees" +msgstr "Fehler beim Erzeugen der Bäume" + +#: builtin/commit.c:911 builtin/tag.c:357 +#, c-format +msgid "Please supply the message using either -m or -F option.\n" +msgstr "Bitte liefere die Beschreibung entweder mit der Option -m oder -F.\n" + +#: builtin/commit.c:1008 +#, c-format +msgid "No existing author found with '%s'" +msgstr "Kein existierender Autor mit '%s' gefunden." + +#: builtin/commit.c:1023 builtin/commit.c:1217 +#, c-format +msgid "Invalid untracked files mode '%s'" +msgstr "Ungültiger Modus '%s' für unverfolgte Dateien" + +#: builtin/commit.c:1063 +msgid "Using both --reset-author and --author does not make sense" +msgstr "Verwendung von --reset-author und --author macht keinen Sinn." + +#: builtin/commit.c:1074 +msgid "You have nothing to amend." +msgstr "Du hast nichts zum nachbessern." + +#: builtin/commit.c:1076 +#, c-format +msgid "You are in the middle of a %s -- cannot amend." +msgstr "Du bist in der Mitte eines %s -- kann nicht nachbessern." + +#: builtin/commit.c:1078 +msgid "Options --squash and --fixup cannot be used together" +msgstr "" +"Die Optionen --squash und --fixup können nicht gemeinsam benutzt werden." + +#: builtin/commit.c:1088 +msgid "Only one of -c/-C/-F/--fixup can be used." +msgstr "Nur eines von -c/-C/-F/--fixup kann benutzt werden." + +#: builtin/commit.c:1090 +msgid "Option -m cannot be combined with -c/-C/-F/--fixup." +msgstr "Option -m kann nicht mit -c/-C/-F/--fixup kombiniert werden" + +#: builtin/commit.c:1098 +msgid "--reset-author can be used only with -C, -c or --amend." +msgstr "--reset--author kann nur mit -C, -c oder --amend benutzt werden" + +#: builtin/commit.c:1115 +msgid "Only one of --include/--only/--all/--interactive/--patch can be used." +msgstr "" +"Nur eines von --include/--only/--all/--interactive/--patch kann benutzt " +"werden." + +#: builtin/commit.c:1117 +msgid "No paths with --include/--only does not make sense." +msgstr "--include/--only machen ohne Pfade keinen Sinn." + +#: builtin/commit.c:1119 +msgid "Clever... amending the last one with dirty index." +msgstr "" +"Klug... nachbessern der letzten Version mit einem unsauberen Bereitstellung." + +#: builtin/commit.c:1121 +msgid "Explicit paths specified without -i nor -o; assuming --only paths..." +msgstr "" +"Explizite Pfade ohne -i oder -o spezifiziert; unter der Annahme von --only " +"Pfaden..." + +#: builtin/commit.c:1131 builtin/tag.c:556 +#, c-format +msgid "Invalid cleanup mode %s" +msgstr "Ungültiger \"cleanup\" Modus %s" + +#: builtin/commit.c:1136 +msgid "Paths with -a does not make sense." +msgstr "Pfade mit -a machen keinen Sinn." + +#: builtin/commit.c:1315 +msgid "couldn't look up newly created commit" +msgstr "Konnte neu erstellte Version nicht nachschlagen." + +#: builtin/commit.c:1317 +msgid "could not parse newly created commit" +msgstr "Konnte neulich erstellte Version nicht analysieren." + +#: builtin/commit.c:1358 +msgid "detached HEAD" +msgstr "losgelöste Zweigspitze (HEAD)" + +#: builtin/commit.c:1360 +msgid " (root-commit)" +msgstr " (Basis-Version)" + +#: builtin/commit.c:1450 +msgid "could not parse HEAD commit" +msgstr "Konnte Version der Zweigspitze (HEAD) nicht analysieren." + +#: builtin/commit.c:1487 builtin/merge.c:509 +#, c-format +msgid "could not open '%s' for reading" +msgstr "Konnte '%s' nicht zum Lesen öffnen." + +#: builtin/commit.c:1494 +#, c-format +msgid "Corrupt MERGE_HEAD file (%s)" +msgstr "Beschädigte MERGE_HEAD-Datei (%s)" + +#: builtin/commit.c:1501 +msgid "could not read MERGE_MODE" +msgstr "Konnte MERGE_MODE nicht lesen" + +#: builtin/commit.c:1520 +#, c-format +msgid "could not read commit message: %s" +msgstr "Konnte Versionsbeschreibung nicht lesen: %s" + +#: builtin/commit.c:1534 +#, c-format +msgid "Aborting commit; you did not edit the message.\n" +msgstr "Eintragung abgebrochen; du hast die Beschreibung nicht editiert.\n" + +#: builtin/commit.c:1539 +#, c-format +msgid "Aborting commit due to empty commit message.\n" +msgstr "Eintragung aufgrund leerer Versionsbeschreibung abgebrochen.\n" + +#: builtin/commit.c:1554 builtin/merge.c:936 builtin/merge.c:961 +msgid "failed to write commit object" +msgstr "Fehler beim Schreiben des Versionsobjektes." + +#: builtin/commit.c:1575 +msgid "cannot lock HEAD ref" +msgstr "Kann Referenz der Zweigspitze (HEAD) nicht sperren." + +#: builtin/commit.c:1579 +msgid "cannot update HEAD ref" +msgstr "Kann Referenz der Zweigspitze (HEAD) nicht aktualisieren." + +#: builtin/commit.c:1590 +msgid "" +"Repository has been updated, but unable to write\n" +"new_index file. Check that disk is not full or quota is\n" +"not exceeded, and then \"git reset HEAD\" to recover." +msgstr "" +"Das Projektarchiv wurde aktualisiert, aber die \"new_index\"-Datei\n" +"konnte nicht geschrieben werden. Prüfe, dass dein Speicher nicht\n" +"voll und Dein Kontingent nicht aufgebraucht ist und führe\n" +"anschließend \"git reset HEAD\" zu Wiederherstellung aus." + +#: builtin/describe.c:234 +#, c-format +msgid "annotated tag %s not available" +msgstr "annotierte Markierung %s ist nicht verfügbar" + +#: builtin/describe.c:238 +#, c-format +msgid "annotated tag %s has no embedded name" +msgstr "annotierte Markierung %s hat keinen eingebetteten Namen" + +#: builtin/describe.c:240 +#, c-format +msgid "tag '%s' is really '%s' here" +msgstr "Markierung '%s' ist wirklich '%s' hier" + +#: builtin/describe.c:267 +#, c-format +msgid "Not a valid object name %s" +msgstr "kein gültiger Objekt-Name %s" + +#: builtin/describe.c:270 +#, c-format +msgid "%s is not a valid '%s' object" +msgstr "%s ist kein gültiges '%s' Objekt" + +#: builtin/describe.c:287 +#, c-format +msgid "no tag exactly matches '%s'" +msgstr "kein Markierung entspricht exakt '%s'" + +#: builtin/describe.c:289 +#, c-format +msgid "searching to describe %s\n" +msgstr "suche um zu beschreiben %s\n" + +#: builtin/describe.c:329 +#, c-format +msgid "finished search at %s\n" +msgstr "beendete Suche bei %s\n" + +#: builtin/describe.c:353 +#, c-format +msgid "" +"No annotated tags can describe '%s'.\n" +"However, there were unannotated tags: try --tags." +msgstr "" +"Keine annotierten Markierungen können '%s' beschreiben.\n" +"Jedoch gab es nicht annotierte Markierungen: versuche --tags." + +#: builtin/describe.c:357 +#, c-format +msgid "" +"No tags can describe '%s'.\n" +"Try --always, or create some tags." +msgstr "" +"Keine Markierungen können '%s' beschreiben.\n" +"Versuche --always oder erstelle einige Markierungen." + +#: builtin/describe.c:378 +#, c-format +msgid "traversed %lu commits\n" +msgstr "verarbeitete %lu Versionen\n" + +#: builtin/describe.c:381 +#, c-format +msgid "" +"more than %i tags found; listed %i most recent\n" +"gave up search at %s\n" +msgstr "" +"mehr als %i Markierungen gefunden; Führe die %i jüngsten auf\n" +"Suche bei %s aufgegeben\n" + +#: builtin/describe.c:436 +msgid "--long is incompatible with --abbrev=0" +msgstr "--long ist inkompatibel mit --abbrev=0" + +#: builtin/describe.c:462 +msgid "No names found, cannot describe anything." +msgstr "Keine Namen gefunden, kann nichts beschreiben." + +#: builtin/describe.c:482 +msgid "--dirty is incompatible with committishes" +msgstr "--dirty ist inkompatibel mit \"committish\"-Werten" + +#: builtin/diff.c:77 +#, c-format +msgid "'%s': not a regular file or symlink" +msgstr "'%s': keine reguläre Datei oder symbolischer Link" + +#: builtin/diff.c:220 +#, c-format +msgid "invalid option: %s" +msgstr "Ungültige Option: %s" + +#: builtin/diff.c:297 +msgid "Not a git repository" +msgstr "Kein Git-Projektarchiv" + +#: builtin/diff.c:347 +#, c-format +msgid "invalid object '%s' given." +msgstr "Ungültiges Objekt '%s' gegeben." + +#: builtin/diff.c:352 +#, c-format +msgid "more than %d trees given: '%s'" +msgstr "Mehr als %d Bäume gegeben: '%s'" + +#: builtin/diff.c:362 +#, c-format +msgid "more than two blobs given: '%s'" +msgstr "Mehr als zwei Blobs gegeben: '%s'" + +#: builtin/diff.c:370 +#, c-format +msgid "unhandled object '%s' given." +msgstr "unbehandeltes Objekt '%s' gegeben" + +#: builtin/fetch.c:200 +msgid "Couldn't find remote ref HEAD" +msgstr "Konnte entfernte Referenz der Zweigspitze (HEAD) nicht finden." + +#: builtin/fetch.c:253 +#, c-format +msgid "object %s not found" +msgstr "Objekt %s nicht gefunden" + +#: builtin/fetch.c:259 +msgid "[up to date]" +msgstr "[aktuell]" + +#: builtin/fetch.c:273 +#, c-format +msgid "! %-*s %-*s -> %s (can't fetch in current branch)" +msgstr "! %-*s %-*s -> %s (kann nicht im aktuellen Zweig anfordern)" + +#: builtin/fetch.c:274 builtin/fetch.c:360 +msgid "[rejected]" +msgstr "[zurückgewiesen]" + +#: builtin/fetch.c:285 +msgid "[tag update]" +msgstr "[Markierungsaktualisierung]" + +#: builtin/fetch.c:287 builtin/fetch.c:322 builtin/fetch.c:340 +msgid " (unable to update local ref)" +msgstr " (kann lokale Referenz nicht aktualisieren)" + +#: builtin/fetch.c:305 +msgid "[new tag]" +msgstr "[neue Markierung]" + +#: builtin/fetch.c:308 +msgid "[new branch]" +msgstr "[neuer Zweig]" + +#: builtin/fetch.c:311 +msgid "[new ref]" +msgstr "[neue Referenz]" + +#: builtin/fetch.c:356 +msgid "unable to update local ref" +msgstr "kann lokale Referenz nicht aktualisieren" + +#: builtin/fetch.c:356 +msgid "forced update" +msgstr "Aktualisierung erzwungen" + +#: builtin/fetch.c:362 +msgid "(non-fast-forward)" +msgstr "(kein Vorspulen)" + +#: builtin/fetch.c:393 builtin/fetch.c:685 +#, c-format +msgid "cannot open %s: %s\n" +msgstr "kann %s nicht öffnen: %s\n" + +#: builtin/fetch.c:402 +#, c-format +msgid "%s did not send all necessary objects\n" +msgstr "%s hat nicht alle erforderlichen Objekte gesendet\n" + +#: builtin/fetch.c:488 +#, c-format +msgid "From %.*s\n" +msgstr "Von %.*s\n" + +#: builtin/fetch.c:499 +#, c-format +msgid "" +"some local refs could not be updated; try running\n" +" 'git remote prune %s' to remove any old, conflicting branches" +msgstr "" +"Einige lokale Referenzen konnten nicht aktualisiert werden; versuche\n" +"'git remote prune %s' um jeden älteren, widersprüchlichen Zweig zu entfernen." + +#: builtin/fetch.c:549 +#, c-format +msgid " (%s will become dangling)\n" +msgstr " (%s wird unreferenziert werden)\n" + +#: builtin/fetch.c:550 +#, c-format +msgid " (%s has become dangling)\n" +msgstr " (%s wurde unreferenziert)\n" + +#: builtin/fetch.c:557 +msgid "[deleted]" +msgstr "[gelöscht]" + +#: builtin/fetch.c:558 +msgid "(none)" +msgstr "(keine)" + +#: builtin/fetch.c:675 +#, c-format +msgid "Refusing to fetch into current branch %s of non-bare repository" +msgstr "" +"Ablehnung des Anforderns in aktuellen Zweig %s von einem nicht-leeren " +"Projektarchiv" + +#: builtin/fetch.c:709 +#, c-format +msgid "Don't know how to fetch from %s" +msgstr "Weiß nicht wie von %s angefordert wird." + +#: builtin/fetch.c:786 +#, c-format +msgid "Option \"%s\" value \"%s\" is not valid for %s" +msgstr "Option \"%s\" Wert \"%s\" ist nicht gültig für %s" + +#: builtin/fetch.c:789 +#, c-format +msgid "Option \"%s\" is ignored for %s\n" +msgstr "Option \"%s\" wird ignoriert für %s\n" + +#: builtin/fetch.c:888 +#, c-format +msgid "Fetching %s\n" +msgstr "Hole %s ab\n" + +#: builtin/fetch.c:890 +#, c-format +msgid "Could not fetch %s" +msgstr "Konnte %s nicht anfordern" + +#: builtin/fetch.c:907 +msgid "" +"No remote repository specified. Please, specify either a URL or a\n" +"remote name from which new revisions should be fetched." +msgstr "" +"Kein entferntes Projektarchiv spezifiziert. Bitte spezifiziere entweder\n" +"eine URL oder einen Entfernungsname, von welchem neue Revisionen angefordert " +"werden sollen." + +#: builtin/fetch.c:927 +msgid "You need to specify a tag name." +msgstr "Du musst den Namen der Markierung spezifizieren." + +#: builtin/fetch.c:979 +msgid "fetch --all does not take a repository argument" +msgstr "fetch -all nimmt kein Projektarchiv als Argument" + +#: builtin/fetch.c:981 +msgid "fetch --all does not make sense with refspecs" +msgstr "fetch --all macht keinen Sinn mit Referenzspezifikationen" + +#: builtin/fetch.c:992 +#, c-format +msgid "No such remote or remote group: %s" +msgstr "Keine solche Entfernung oder Entfernungsgruppe: %s" + +#: builtin/fetch.c:1000 +msgid "Fetching a group and specifying refspecs does not make sense" +msgstr "" +"Abholen einer Gruppe und Spezifizieren von Referenzspezifikationen macht " +"keinen Sinn." + +#: builtin/gc.c:63 +#, c-format +msgid "Invalid %s: '%s'" +msgstr "Ungültiger %s: '%s'" + +#: builtin/gc.c:78 +msgid "Too many options specified" +msgstr "Zu viele Optionen spezifiziert" + +#: builtin/gc.c:103 +#, c-format +msgid "insanely long object directory %.*s" +msgstr "wahnsinnig langes Objekt-Verzeichnis %.*s" + +#: builtin/gc.c:223 +#, c-format +msgid "Auto packing the repository for optimum performance.\n" +msgstr "Automatische Paketierung des Repositories für optimale Leitung.\n" + +#: builtin/gc.c:226 +#, c-format +msgid "" +"Auto packing the repository for optimum performance. You may also\n" +"run \"git gc\" manually. See \"git help gc\" for more information.\n" +msgstr "" +"Automatische Paketierung des Repositories für optimale Leitung. Du darfst " +"auch\n" +"\"git gc\" manuell ausführen. Siehe \"git help gc\" für weitere " +"Informationen.\n" + +#: builtin/gc.c:256 +msgid "" +"There are too many unreachable loose objects; run 'git prune' to remove them." +msgstr "" +"Es gibt zu viele unerreichbare, verlorene Objekte; führe 'git prune' aus um " +"diese zu entfernen." + +#: builtin/grep.c:216 +#, c-format +msgid "grep: failed to create thread: %s" +msgstr "grep: Fehler beim Erzeugen eines Thread: %s" + +#: builtin/grep.c:402 +#, c-format +msgid "Failed to chdir: %s" +msgstr "Fehler beim Verzeichniswechsel: %s" + +#: builtin/grep.c:478 builtin/grep.c:512 +#, c-format +msgid "unable to read tree (%s)" +msgstr "konnte Baum (%s) nicht lesen" + +#: builtin/grep.c:526 +#, c-format +msgid "unable to grep from object of type %s" +msgstr "kann \"grep\" nicht mit Objekt des Typs \"%s\" durchführen" + +#: builtin/grep.c:584 +#, c-format +msgid "switch `%c' expects a numerical value" +msgstr "Schalter '%c' erwartet einen numerischen Wert" + +#: builtin/grep.c:601 +#, c-format +msgid "cannot open '%s'" +msgstr "kann '%s' nicht öffnen" + +#: builtin/grep.c:888 +msgid "no pattern given." +msgstr "keine Muster gegeben" + +#: builtin/grep.c:902 +#, c-format +msgid "bad object %s" +msgstr "schlechtes Objekt %s" + +#: builtin/grep.c:943 +msgid "--open-files-in-pager only works on the worktree" +msgstr "--open-files-in-pager arbeitet nur auf dem Arbeitsbaum" + +#: builtin/grep.c:966 +msgid "--cached or --untracked cannot be used with --no-index." +msgstr "--cached oder --untracked kann nicht mit --no-index benutzt werden" + +#: builtin/grep.c:971 +msgid "--no-index or --untracked cannot be used with revs." +msgstr "--no-index oder --untracked kann nicht mit Revisionen benutzt werden" + +#: builtin/grep.c:974 +msgid "--[no-]exclude-standard cannot be used for tracked contents." +msgstr "" +"--[no-]exlude-standard kann nicht mit verfolgten Inhalten benutzt werden" + +#: builtin/grep.c:982 +msgid "both --cached and trees are given." +msgstr "sowohl --cached als auch Bäume gegeben" + +#: builtin/init-db.c:35 +#, c-format +msgid "Could not make %s writable by group" +msgstr "Konnte %s nicht schreibbar für Gruppen machen" + +#: builtin/init-db.c:62 +#, c-format +msgid "insanely long template name %s" +msgstr "verrückt langer Vorlagen-Name %s" + +#: builtin/init-db.c:67 +#, c-format +msgid "cannot stat '%s'" +msgstr "'%s' kann nicht gelesen werden" + +#: builtin/init-db.c:73 +#, c-format +msgid "cannot stat template '%s'" +msgstr "kann Vorlage '%s' nicht lesen" + +#: builtin/init-db.c:80 +#, c-format +msgid "cannot opendir '%s'" +msgstr "kann Verzeichnis '%s' nicht öffnen" + +#: builtin/init-db.c:97 +#, c-format +msgid "cannot readlink '%s'" +msgstr "kann Verknüfpung '%s' nicht lesen" + +#: builtin/init-db.c:99 +#, c-format +msgid "insanely long symlink %s" +msgstr "verrückt lange symbolische Verknüpfung %s" + +#: builtin/init-db.c:102 +#, c-format +msgid "cannot symlink '%s' '%s'" +msgstr "kann '%s' '%s' nicht symbolisch verknüpfen" + +#: builtin/init-db.c:106 +#, c-format +msgid "cannot copy '%s' to '%s'" +msgstr "kann '%s' nicht nach '%s' kopieren" + +#: builtin/init-db.c:110 +#, c-format +msgid "ignoring template %s" +msgstr "ignoriere Vorlage %s" + +#: builtin/init-db.c:133 +#, c-format +msgid "insanely long template path %s" +msgstr "verrückt langer Vorlagen-Pfad %s" + +#: builtin/init-db.c:141 +#, c-format +msgid "templates not found %s" +msgstr "Vorlagen nicht gefunden %s" + +#: builtin/init-db.c:154 +#, c-format +msgid "not copying templates of a wrong format version %d from '%s'" +msgstr "kopiere keine Vorlagen mit einer falschen Formatversion %d von '%s'" + +#: builtin/init-db.c:192 +#, c-format +msgid "insane git directory %s" +msgstr "verrücktes git Verzeichnis %s" + +#: builtin/init-db.c:322 builtin/init-db.c:325 +#, c-format +msgid "%s already exists" +msgstr "%s existiert bereits" + +#: builtin/init-db.c:354 +#, c-format +msgid "unable to handle file type %d" +msgstr "kann Dateityp %d nicht behandeln" + +#: builtin/init-db.c:357 +#, c-format +msgid "unable to move %s to %s" +msgstr "konnte %s nicht nach %s verschieben" + +#: builtin/init-db.c:362 +#, c-format +msgid "Could not create git link %s" +msgstr "Konnte git-Verknüfung %s nicht erstellen" + +#. +#. * TRANSLATORS: The first '%s' is either "Reinitialized +#. * existing" or "Initialized empty", the second " shared" or +#. * "", and the last '%s%s' is the verbatim directory name. +#. +#: builtin/init-db.c:419 +#, c-format +msgid "%s%s Git repository in %s%s\n" +msgstr "%s%s Git-Projektarchiv in %s%s\n" + +#: builtin/init-db.c:420 +msgid "Reinitialized existing" +msgstr "Reinitialisierte existierendes" + +#: builtin/init-db.c:420 +msgid "Initialized empty" +msgstr "Initialisierte leeres" + +#: builtin/init-db.c:421 +msgid " shared" +msgstr " geteilt" + +#: builtin/init-db.c:440 +msgid "cannot tell cwd" +msgstr "kann nicht \"cwd\" sagen" + +#: builtin/init-db.c:521 builtin/init-db.c:528 +#, c-format +msgid "cannot mkdir %s" +msgstr "kann Verzeichnis %s nicht erstellen" + +#: builtin/init-db.c:532 +#, c-format +msgid "cannot chdir to %s" +msgstr "kann nicht zu Verzeichnis %s wechseln" + +#: builtin/init-db.c:554 +#, c-format +msgid "" +"%s (or --work-tree=<directory>) not allowed without specifying %s (or --git-" +"dir=<directory>)" +msgstr "" +"%s (oder --work-tree=<Verzeichnis>) nicht erlaubt ohne Spezifizierung von %s " +"(oder --git-dir=<Verzeichnis>)" + +#: builtin/init-db.c:578 +msgid "Cannot access current working directory" +msgstr "Kann nicht auf aktuelles Arbeitsverzeichnis zugreifen." + +#: builtin/init-db.c:585 +#, c-format +msgid "Cannot access work tree '%s'" +msgstr "Kann nicht auf Arbeitsbaum '%s' zugreifen." + +#: builtin/log.c:188 +#, c-format +msgid "Final output: %d %s\n" +msgstr "letzte Ausgabe: %d %s\n" + +#: builtin/log.c:401 builtin/log.c:489 +#, c-format +msgid "Could not read object %s" +msgstr "Kann Objekt %s nicht lesen." + +#: builtin/log.c:513 +#, c-format +msgid "Unknown type: %d" +msgstr "Unbekannter Typ: %d" + +#: builtin/log.c:602 +msgid "format.headers without value" +msgstr "format.headers ohne Wert" + +#: builtin/log.c:675 +msgid "name of output directory is too long" +msgstr "Name des Ausgabeverzeichnisses ist zu lang." + +#: builtin/log.c:686 +#, c-format +msgid "Cannot open patch file %s" +msgstr "Kann Patch-Datei %s nicht öffnen" + +#: builtin/log.c:700 +msgid "Need exactly one range." +msgstr "Brauche genau einen Bereich." + +#: builtin/log.c:708 +msgid "Not a range." +msgstr "Kein Bereich." + +#: builtin/log.c:745 +msgid "Could not extract email from committer identity." +msgstr "Konnte E-Mail von der Intentität des Einreichers nicht extrahieren." + +#: builtin/log.c:791 +msgid "Cover letter needs email format" +msgstr "Anschreiben benötigt E-Mail-Format" + +#: builtin/log.c:885 +#, c-format +msgid "insane in-reply-to: %s" +msgstr "verrücktes in-reply-to: %s" + +#: builtin/log.c:958 +msgid "Two output directories?" +msgstr "Zwei Ausgabeverzeichnisse?" + +#: builtin/log.c:1179 +#, c-format +msgid "bogus committer info %s" +msgstr "unechte Einreicher-Informationen %s" + +#: builtin/log.c:1224 +msgid "-n and -k are mutually exclusive." +msgstr "-n und -k sind zueinander exklusiv" + +#: builtin/log.c:1226 +msgid "--subject-prefix and -k are mutually exclusive." +msgstr "--subject-prefix und -k sind zueinander exklusiv" + +#: builtin/log.c:1231 builtin/shortlog.c:284 +#, c-format +msgid "unrecognized argument: %s" +msgstr "nicht erkanntes Argument: %s" + +#: builtin/log.c:1234 +msgid "--name-only does not make sense" +msgstr "--name-only macht keinen Sinn" + +#: builtin/log.c:1236 +msgid "--name-status does not make sense" +msgstr "--name-status macht keinen Sinn" + +#: builtin/log.c:1238 +msgid "--check does not make sense" +msgstr "--check macht keinen Sinn" + +#: builtin/log.c:1261 +msgid "standard output, or directory, which one?" +msgstr "Standard-Ausgabe oder Verzeichnis, welches von beidem?" + +#: builtin/log.c:1263 +#, c-format +msgid "Could not create directory '%s'" +msgstr "Konnte Verzeichnis '%s' nicht erstellen." + +#: builtin/log.c:1416 +msgid "Failed to create output files" +msgstr "Fehler beim Erstellen der Ausgabedateien." + +#: builtin/log.c:1520 +#, c-format +msgid "" +"Could not find a tracked remote branch, please specify <upstream> manually.\n" +msgstr "" +"Konnte gefolgten, entfernten Zweig nicht finden, bitte spezifiziere " +"<upstream> manuell.\n" + +#: builtin/log.c:1536 builtin/log.c:1538 builtin/log.c:1550 +#, c-format +msgid "Unknown commit %s" +msgstr "Unbekannte Version %s" + +#: builtin/merge.c:90 +msgid "switch `m' requires a value" +msgstr "Schalter 'm' erfordert einen Wert." + +#: builtin/merge.c:127 +#, c-format +msgid "Could not find merge strategy '%s'.\n" +msgstr "Konnte Zusammenführungsstrategie '%s' nicht finden.\n" + +#: builtin/merge.c:128 +#, c-format +msgid "Available strategies are:" +msgstr "Verfügbare Strategien sind:" + +#: builtin/merge.c:133 +#, c-format +msgid "Available custom strategies are:" +msgstr "Verfügbare benutzerdefinierte Strategien sind:" + +#: builtin/merge.c:240 +msgid "could not run stash." +msgstr "Konnte \"stash\" nicht ausführen." + +#: builtin/merge.c:245 +msgid "stash failed" +msgstr "\"stash\" fehlgeschlagen" + +#: builtin/merge.c:250 +#, c-format +msgid "not a valid object: %s" +msgstr "kein gültiges Objekt: %s" + +#: builtin/merge.c:269 builtin/merge.c:286 +msgid "read-tree failed" +msgstr "read-tree fehlgeschlagen" + +#: builtin/merge.c:316 +msgid " (nothing to squash)" +msgstr " (nichts zu quetschen)" + +#: builtin/merge.c:329 +#, c-format +msgid "Squash commit -- not updating HEAD\n" +msgstr "Quetsche Version -- aktualisiere Zweigspitze (HEAD) nicht\n" + +#: builtin/merge.c:361 +msgid "Writing SQUASH_MSG" +msgstr "Schreibe SQUASH_MSG" + +#: builtin/merge.c:363 +msgid "Finishing SQUASH_MSG" +msgstr "Schließe SQUASH_MSG ab" + +#: builtin/merge.c:386 +#, c-format +msgid "No merge message -- not updating HEAD\n" +msgstr "" +"Keine Zusammenführungsbeschreibung -- aktualisiere Zweigspitze (HEAD) nicht\n" + +#: builtin/merge.c:437 +#, c-format +msgid "'%s' does not point to a commit" +msgstr "'%s' zeigt auf keine Version" + +#: builtin/merge.c:536 +#, c-format +msgid "Bad branch.%s.mergeoptions string: %s" +msgstr "Schlechter branch.%s.mergeoptions String: %s" + +#: builtin/merge.c:629 +msgid "git write-tree failed to write a tree" +msgstr "\"git write-tree\" schlug beim Schreiben eines Baumes fehl" + +#: builtin/merge.c:679 +msgid "failed to read the cache" +msgstr "Lesen des Zwischenspeichers fehlgeschlagen" + +#: builtin/merge.c:697 +msgid "Unable to write index." +msgstr "Konnte Bereitstellung nicht schreiben." + +#: builtin/merge.c:710 +msgid "Not handling anything other than two heads merge." +msgstr "Behandle nichts anderes als die Zusammenführung von zwei Köpfen." + +#: builtin/merge.c:724 +#, c-format +msgid "Unknown option for merge-recursive: -X%s" +msgstr "Unbekannte Option für merge-recursive: -X%s" + +#: builtin/merge.c:738 +#, c-format +msgid "unable to write %s" +msgstr "konnte %s nicht schreiben" + +#: builtin/merge.c:877 +#, c-format +msgid "Could not read from '%s'" +msgstr "konnte nicht von '%s' lesen" + +#: builtin/merge.c:886 +#, c-format +msgid "Not committing merge; use 'git commit' to complete the merge.\n" +msgstr "" +"Zusammenführung nicht eingetragen; benutze 'git commit' um die " +"Zusammenführung abzuschließen.\n" + +#: builtin/merge.c:892 +msgid "" +"Please enter a commit message to explain why this merge is necessary,\n" +"especially if it merges an updated upstream into a topic branch.\n" +"\n" +"Lines starting with '#' will be ignored, and an empty message aborts\n" +"the commit.\n" +msgstr "" +"Bitte gebe eine Versionsbeschreibung ein um zu erklären, warum diese " +"Zusammenführung erforderlich ist,\n" +"insbesondere wenn es einen aktualisierten entfernten Zweig mit einem Thema-" +"Zweig zusammenführt.\n" +"\n" +"Zeilen beginnend mit '#' werden ignoriert, und eine leere Beschreibung " +"bricht die Eintragung ab.\n" + +#: builtin/merge.c:916 +msgid "Empty commit message." +msgstr "Leere Versionsbeschreibung" + +#: builtin/merge.c:928 +#, c-format +msgid "Wonderful.\n" +msgstr "Wunderbar.\n" + +#: builtin/merge.c:993 +#, c-format +msgid "Automatic merge failed; fix conflicts and then commit the result.\n" +msgstr "" +"Automatische Zusammenführung fehlgeschlagen; behebe die Konflikte und trage " +"dann das Ergebnis ein.\n" + +#: builtin/merge.c:1009 +#, c-format +msgid "'%s' is not a commit" +msgstr "'%s' ist keine Version" + +#: builtin/merge.c:1050 +msgid "No current branch." +msgstr "Kein aktueller Zweig." + +#: builtin/merge.c:1052 +msgid "No remote for the current branch." +msgstr "Kein anderes Archiv für den aktuellen Zweig." + +#: builtin/merge.c:1054 +msgid "No default upstream defined for the current branch." +msgstr "" +"Kein entferntes Standard-Projektarchiv für den aktuellen Zweig definiert." + +#: builtin/merge.c:1059 +#, c-format +msgid "No remote tracking branch for %s from %s" +msgstr "Kein entfernter Übernahmezweig für %s von %s" + +#: builtin/merge.c:1146 builtin/merge.c:1303 +#, c-format +msgid "%s - not something we can merge" +msgstr "%s - nichts was wir zusammenführen können" + +#: builtin/merge.c:1214 +msgid "There is no merge to abort (MERGE_HEAD missing)." +msgstr "Es gibt keine Zusammenführung zum Abbrechen (vermisse MERGE_HEAD)" + +#: builtin/merge.c:1230 git-pull.sh:31 +msgid "" +"You have not concluded your merge (MERGE_HEAD exists).\n" +"Please, commit your changes before you can merge." +msgstr "" +"Du hast deine Zusammenführung nicht abgeschlossen (MERGE_HEAD existiert).\n" +"Bitte trage deine Änderungen ein, bevor du zusammenführen kannst." + +#: builtin/merge.c:1233 git-pull.sh:34 +msgid "You have not concluded your merge (MERGE_HEAD exists)." +msgstr "" +"Du hast deine Zusammenführung nicht abgeschlossen (MERGE_HEAD existiert)." + +#: builtin/merge.c:1237 +msgid "" +"You have not concluded your cherry-pick (CHERRY_PICK_HEAD exists).\n" +"Please, commit your changes before you can merge." +msgstr "" +"Du hast deinen \"cherry-pick\" nicht abgeschlossen (CHERRY_PICK_HEAD " +"existiert).\n" +"Bitte trage deine Änderungen ein, bevor du zusammenführen kannst." + +#: builtin/merge.c:1240 +msgid "You have not concluded your cherry-pick (CHERRY_PICK_HEAD exists)." +msgstr "" +"Du hast deinen \"cherry-pick\" nicht abgeschlossen (CHERRY_PICK_HEAD " +"existiert)." + +#: builtin/merge.c:1249 +msgid "You cannot combine --squash with --no-ff." +msgstr "Du kannst --squash nicht mit --no-ff kombinieren." + +#: builtin/merge.c:1254 +msgid "You cannot combine --no-ff with --ff-only." +msgstr "Du kannst --no-ff nicht mit --ff--only kombinieren." + +#: builtin/merge.c:1261 +msgid "No commit specified and merge.defaultToUpstream not set." +msgstr "Keine Version spezifiziert und merge.defaultToUpstream nicht gesetzt." + +#: builtin/merge.c:1293 +msgid "Can merge only exactly one commit into empty head" +msgstr "Kann nur exakt eine Version in einem leeren Kopf zusammenführen." + +#: builtin/merge.c:1296 +msgid "Squash commit into empty head not supported yet" +msgstr "" +"Quetschen einer Version in einen leeren Kopf wird momentan nicht unterstützt." + +#: builtin/merge.c:1298 +msgid "Non-fast-forward commit does not make sense into an empty head" +msgstr "nicht vorzuspulende Version macht in einem leeren Kopf keinen Sinn" + +#: builtin/merge.c:1413 +#, c-format +msgid "Updating %s..%s\n" +msgstr "Aktualisiere %s..%s\n" + +#: builtin/merge.c:1451 +#, c-format +msgid "Trying really trivial in-index merge...\n" +msgstr "Probiere wirklich triviale \"in-index\"-Zusammenführung...\n" + +#: builtin/merge.c:1458 +#, c-format +msgid "Nope.\n" +msgstr "Nein.\n" + +#: builtin/merge.c:1490 +msgid "Not possible to fast-forward, aborting." +msgstr "Vorspulen nicht möglich, breche ab." + +#: builtin/merge.c:1513 builtin/merge.c:1592 +#, c-format +msgid "Rewinding the tree to pristine...\n" +msgstr "Rücklauf des Baumes bis zum Ursprung...\n" + +#: builtin/merge.c:1517 +#, c-format +msgid "Trying merge strategy %s...\n" +msgstr "Probiere Zusammenführungsstrategie %s...\n" + +#: builtin/merge.c:1583 +#, c-format +msgid "No merge strategy handled the merge.\n" +msgstr "Keine Zusammenführungsstrategie behandelt die Zusammenführung.\n" + +#: builtin/merge.c:1585 +#, c-format +msgid "Merge with strategy %s failed.\n" +msgstr "Zusammenführung mit Strategie %s fehlgeschlagen.\n" + +#: builtin/merge.c:1594 +#, c-format +msgid "Using the %s to prepare resolving by hand.\n" +msgstr "Benutze \"%s\" um die Auflösung per Hand vorzubereiten.\n" + +#: builtin/merge.c:1606 +#, c-format +msgid "Automatic merge went well; stopped before committing as requested\n" +msgstr "" +"Automatische Zusammenführung gut gegangen; stoppe, wie angefragt, vor der " +"Eintragung\n" + +#: builtin/mv.c:108 +#, c-format +msgid "Checking rename of '%s' to '%s'\n" +msgstr "Prüfe Umbenennen von '%s' nach '%s'\n" + +#: builtin/mv.c:112 +msgid "bad source" +msgstr "schlechte Quelle" + +#: builtin/mv.c:115 +msgid "can not move directory into itself" +msgstr "kann Verzeichnis nicht in sich selbst verschieben" + +#: builtin/mv.c:118 +msgid "cannot move directory over file" +msgstr "kann Verzeichnis nicht über Datei verschieben" + +#: builtin/mv.c:128 +#, c-format +msgid "Huh? %.*s is in index?" +msgstr "Huh? %.*s ist in der Bereitstellung?" + +#: builtin/mv.c:140 +msgid "source directory is empty" +msgstr "Quellverzeichnis ist leer" + +#: builtin/mv.c:171 +msgid "not under version control" +msgstr "nicht unter Versionskontrolle" + +#: builtin/mv.c:173 +msgid "destination exists" +msgstr "Ziel existiert" + +#: builtin/mv.c:181 +#, c-format +msgid "overwriting '%s'" +msgstr "überschreibe '%s'" + +#: builtin/mv.c:184 +msgid "Cannot overwrite" +msgstr "Kann nicht überschreiben" + +#: builtin/mv.c:187 +msgid "multiple sources for the same target" +msgstr "mehrere Quellen für das selbe Ziel" + +#: builtin/mv.c:202 +#, c-format +msgid "%s, source=%s, destination=%s" +msgstr "%s, Quelle=%s, Ziel=%s" + +#: builtin/mv.c:212 +#, c-format +msgid "Renaming %s to %s\n" +msgstr "Benenne %s nach %s um\n" + +#: builtin/mv.c:215 +#, c-format +msgid "renaming '%s' failed" +msgstr "Umbenennen von '%s' fehlgeschlagen" + +#: builtin/notes.c:139 +#, c-format +msgid "unable to start 'show' for object '%s'" +msgstr "konnte 'show' für Objekt '%s' nicht starten" + +#: builtin/notes.c:145 +msgid "can't fdopen 'show' output fd" +msgstr "konnte Datei-Deskriptor für Ausgabe von 'show' nicht öffnen" + +#: builtin/notes.c:155 +#, c-format +msgid "failed to close pipe to 'show' for object '%s'" +msgstr "Schließen der Pipe zu 'show' für Objekt '%s' fehlgeschlagen." + +#: builtin/notes.c:158 +#, c-format +msgid "failed to finish 'show' for object '%s'" +msgstr "'show' konnte für Objekt '%s' nicht abgeschlossen werden" + +#: builtin/notes.c:175 builtin/tag.c:343 +#, c-format +msgid "could not create file '%s'" +msgstr "konnte Datei '%s' nicht erstellen" + +#: builtin/notes.c:189 +msgid "Please supply the note contents using either -m or -F option" +msgstr "Bitte liefere den Notiz-Inhalt unter Verwendung der Option -m oder -F." + +#: builtin/notes.c:210 builtin/notes.c:973 +#, c-format +msgid "Removing note for object %s\n" +msgstr "Entferne Notiz für Objekt %s\n" + +#: builtin/notes.c:215 +msgid "unable to write note object" +msgstr "Konnte Notiz-Objekt nicht schreiben" + +#: builtin/notes.c:217 +#, c-format +msgid "The note contents has been left in %s" +msgstr "Die Notiz-Inhalte wurden in %s belassen" + +#: builtin/notes.c:251 builtin/tag.c:521 +#, c-format +msgid "cannot read '%s'" +msgstr "kann '%s' nicht lesen" + +#: builtin/notes.c:253 builtin/tag.c:524 +#, c-format +msgid "could not open or read '%s'" +msgstr "konnte '%s' nicht öffnen oder lesen" + +#: builtin/notes.c:272 builtin/notes.c:445 builtin/notes.c:447 +#: builtin/notes.c:507 builtin/notes.c:561 builtin/notes.c:644 +#: builtin/notes.c:649 builtin/notes.c:724 builtin/notes.c:766 +#: builtin/notes.c:968 builtin/reset.c:293 builtin/tag.c:537 +#, c-format +msgid "Failed to resolve '%s' as a valid ref." +msgstr "'%s' konnte nicht als gültige Referenz aufgelöst werden." + +#: builtin/notes.c:275 +#, c-format +msgid "Failed to read object '%s'." +msgstr "Fehler beim Lesen des Objektes '%s'." + +#: builtin/notes.c:299 +msgid "Cannot commit uninitialized/unreferenced notes tree" +msgstr "Kann uninitialisierten/unreferenzierten Notiz-Baum nicht eintragen." + +#: builtin/notes.c:340 +#, c-format +msgid "Bad notes.rewriteMode value: '%s'" +msgstr "Schlechter notes.rewriteMode Wert: '%s'" + +#: builtin/notes.c:350 +#, c-format +msgid "Refusing to rewrite notes in %s (outside of refs/notes/)" +msgstr "" +"Neuschreiben der Notizen in %s zurückgewiesen (außerhalb von refs/notes/)" + +#. TRANSLATORS: The first %s is the name of the +#. environment variable, the second %s is its value +#: builtin/notes.c:377 +#, c-format +msgid "Bad %s value: '%s'" +msgstr "Schlechter %s Wert: '%s'" + +#: builtin/notes.c:441 +#, c-format +msgid "Malformed input line: '%s'." +msgstr "Fehlerhafte Eingabezeile: '%s'." + +#: builtin/notes.c:456 +#, c-format +msgid "Failed to copy notes from '%s' to '%s'" +msgstr "Fehler beim Kopieren der Notizen von '%s' nach '%s'" + +#: builtin/notes.c:500 builtin/notes.c:554 builtin/notes.c:627 +#: builtin/notes.c:639 builtin/notes.c:712 builtin/notes.c:759 +#: builtin/notes.c:1033 +msgid "too many parameters" +msgstr "zu viele Parameter" + +#: builtin/notes.c:513 builtin/notes.c:772 +#, c-format +msgid "No note found for object %s." +msgstr "Kein Notiz für Objekt %s gefunden." + +#: builtin/notes.c:580 +#, c-format +msgid "" +"Cannot add notes. Found existing notes for object %s. Use '-f' to overwrite " +"existing notes" +msgstr "" +"Konnte Notizen nicht hinzufügen. Existierende Notizen für Objekt %s " +"gefunden. Verwende '-f' um die existierenden Notizen zu überschreiben." + +#: builtin/notes.c:585 builtin/notes.c:662 +#, c-format +msgid "Overwriting existing notes for object %s\n" +msgstr "Überschreibe existierende Notizen für Objekt %s\n" + +#: builtin/notes.c:635 +msgid "too few parameters" +msgstr "zu wenig Parameter" + +#: builtin/notes.c:656 +#, c-format +msgid "" +"Cannot copy notes. Found existing notes for object %s. Use '-f' to overwrite " +"existing notes" +msgstr "" +"Kann Notizen nicht kopieren. Existierende Notizen für Objekt %s gefunden. " +"Verwende '-f' um die existierenden Notizen zu überschreiben." + +#: builtin/notes.c:668 +#, c-format +msgid "Missing notes on source object %s. Cannot copy." +msgstr "Vermisse Notizen für Quell-Objekt %s. Kann nicht kopieren." + +#: builtin/notes.c:717 +#, c-format +msgid "" +"The -m/-F/-c/-C options have been deprecated for the 'edit' subcommand.\n" +"Please use 'git notes add -f -m/-F/-c/-C' instead.\n" +msgstr "" +"Die Optionen -m/-F/-c/-C sind veraltet für das 'edit' Unterkommando.\n" +"Bitte benutze stattdessen 'git notes add -f -m/-F/-c/-C'.\n" + +#: builtin/notes.c:971 +#, c-format +msgid "Object %s has no note\n" +msgstr "Objekt %s hat keine Notiz\n" + +#: builtin/notes.c:1103 +#, c-format +msgid "Unknown subcommand: %s" +msgstr "Unbekanntes Unterkommando: %s" + +#: builtin/pack-objects.c:2310 +#, c-format +msgid "unsupported index version %s" +msgstr "Nicht unterstützte Bereitstellungsversion %s" + +#: builtin/pack-objects.c:2314 +#, c-format +msgid "bad index version '%s'" +msgstr "Schlechte Bereitstellungsversion '%s'" + +#: builtin/pack-objects.c:2322 +#, c-format +msgid "option %s does not accept negative form" +msgstr "Option %s akzeptiert keine negative Form" + +#: builtin/pack-objects.c:2326 +#, c-format +msgid "unable to parse value '%s' for option %s" +msgstr "konnte Wert '%s' für Option %s nicht analysieren" + +#: builtin/push.c:45 +msgid "tag shorthand without <tag>" +msgstr "Kurzschrift für Markierung ohne <Markierung>" + +#: builtin/push.c:64 +msgid "--delete only accepts plain target ref names" +msgstr "--delete akzeptiert nur reine Referenz-Namen als Ziel" + +#: builtin/push.c:84 +#, c-format +msgid "" +"You are not currently on a branch.\n" +"To push the history leading to the current (detached HEAD)\n" +"state now, use\n" +"\n" +" git push %s HEAD:<name-of-remote-branch>\n" +msgstr "" +"Du befindest dich sich im Moment auf keinem Zweig.\n" +"Um die Historie, führend zum aktuellen (freistehende Zweigspitze (HEAD))\n" +"Status zu versenden, benutze\n" +"\n" +" git push %s HEAD:<Name-des-entfernten-Zweiges>\n" + +#: builtin/push.c:91 +#, c-format +msgid "" +"The current branch %s has no upstream branch.\n" +"To push the current branch and set the remote as upstream, use\n" +"\n" +" git push --set-upstream %s %s\n" +msgstr "" +"Der aktuelle Zweig %s hat keinen Zweig im entfernten Projektarchiv.\n" +"Um den aktuellen Zweig zu versenden und die Entfernung als entferntes\n" +"Projektarchiv zu setzen, benutze\n" +"\n" +" git push --set-upstream %s %s\n" + +#: builtin/push.c:99 +#, c-format +msgid "The current branch %s has multiple upstream branches, refusing to push." +msgstr "" +"Der aktuelle Zweig %s hat mehrere entfernte Zweige, Versand verweigert." + +#: builtin/push.c:102 +#, c-format +msgid "" +"You are pushing to remote '%s', which is not the upstream of\n" +"your current branch '%s', without telling me what to push\n" +"to update which remote branch." +msgstr "" +"Du versendest nach '%s', welches kein entferntes Projektarchiv deines\n" +"aktuellen Zweiges '%s' ist, ohne mir mitzuteilen, was ich versenden\n" +"soll um welchen entfernten Zweig zu aktualisieren." + +#: builtin/push.c:131 +msgid "" +"You didn't specify any refspecs to push, and push.default is \"nothing\"." +msgstr "" +"Du hast keine Referenzspezifikationen zum Versenden spezifiziert, und push." +"default ist \"nothing\"." + +#: builtin/push.c:138 +msgid "" +"Updates were rejected because the tip of your current branch is behind\n" +"its remote counterpart. Merge the remote changes (e.g. 'git pull')\n" +"before pushing again.\n" +"See the 'Note about fast-forwards' in 'git push --help' for details." +msgstr "" +"Aktualisierungen wurden zurückgewiesen, weil die Spitze deines aktuellen\n" +"Zweiges hinter seinem entfernten Gegenstück ist. Führe die entfernten\n" +"Änderungen zusammen (z.B. 'git pull') bevor du erneut versendest.\n" +"Siehe auch die 'Note about fast-forwards' Sektion von 'git push --help'\n" +"für weitere Details." + +#: builtin/push.c:144 +msgid "" +"Updates were rejected because a pushed branch tip is behind its remote\n" +"counterpart. If you did not intend to push that branch, you may want to\n" +"specify branches to push or set the 'push.default' configuration\n" +"variable to 'current' or 'upstream' to push only the current branch." +msgstr "" +"Aktualisierungen wurden zurückgewiesen, weil die Spitze eines versendeten\n" +"Zweiges hinter seinem entfernten Gegenstück ist. Wenn du nicht beabsichtigt\n" +"hast, diesen Zweig zu versenden, kannst du auch den zu versendenden Zweig\n" +"spezifizieren oder die Konfigurationsvariable 'push.default' zu 'current'\n" +"oder 'upstream' setze, um nur den aktuellen Zweig zu versenden." + +#: builtin/push.c:150 +msgid "" +"Updates were rejected because a pushed branch tip is behind its remote\n" +"counterpart. Check out this branch and merge the remote changes\n" +"(e.g. 'git pull') before pushing again.\n" +"See the 'Note about fast-forwards' in 'git push --help' for details." +msgstr "" +"Aktualisierungen wurden zurückgewiesen, weil die Spitze eines versendeten\n" +"Zweiges hinter seinem entfernten Gegenstück ist. Checke diesen Zweig aus\n" +"und führe die entfernten Änderungen zusammen (z.B. 'git pull') bevor du\n" +"erneut versendest.\n" +"Sie auch die 'Note about fast-forwards' Sektion von 'git push --help'\n" +"für weitere Details." + +#: builtin/push.c:190 +#, c-format +msgid "Pushing to %s\n" +msgstr "Schiebe zu %s\n" + +#: builtin/push.c:194 +#, c-format +msgid "failed to push some refs to '%s'" +msgstr "Fehler beim Versenden einiger Referenzen nach '%s'" + +#: builtin/push.c:226 +#, c-format +msgid "bad repository '%s'" +msgstr "schlechtes Projektarchiv '%s'" + +#: builtin/push.c:227 +msgid "" +"No configured push destination.\n" +"Either specify the URL from the command-line or configure a remote " +"repository using\n" +"\n" +" git remote add <name> <url>\n" +"\n" +"and then push using the remote name\n" +"\n" +" git push <name>\n" +msgstr "" +"Kein Ziel zum Versenden konfiguriert.\n" +"Entweder spezifizierst du die URL von der Kommandozeile oder konfigurierst " +"ein entferntes Projektarchiv unter Benutzung von\n" +"\n" +" git remote add <Name> <URL>\n" +"\n" +"und versendest dann unter Benutzung dieses Namens\n" +"\n" +" git push <Name>\n" + +#: builtin/push.c:242 +msgid "--all and --tags are incompatible" +msgstr "--all und --tags sind inkompatibel" + +#: builtin/push.c:243 +msgid "--all can't be combined with refspecs" +msgstr "--all kann nicht mit Referenzspezifikationen kombiniert werden" + +#: builtin/push.c:248 +msgid "--mirror and --tags are incompatible" +msgstr "--mirror und --tags sind inkompatibel" + +#: builtin/push.c:249 +msgid "--mirror can't be combined with refspecs" +msgstr "--mirror kann nicht mit Referenzspezifikationen kombiniert werden" + +#: builtin/push.c:254 +msgid "--all and --mirror are incompatible" +msgstr "--all und --mirror sind inkompatibel" + +#: builtin/push.c:342 +msgid "--delete is incompatible with --all, --mirror and --tags" +msgstr "--delete ist inkompatibel mit --all, --mirror und --tags" + +#: builtin/push.c:344 +msgid "--delete doesn't make sense without any refs" +msgstr "--delete macht ohne irgendeine Referenz ohne keinen Sinn" + +#: builtin/reset.c:33 +msgid "mixed" +msgstr "gemischt" + +#: builtin/reset.c:33 +msgid "soft" +msgstr "weich" + +#: builtin/reset.c:33 +msgid "hard" +msgstr "hart" + +#: builtin/reset.c:33 +msgid "keep" +msgstr "halten" + +#: builtin/reset.c:77 +msgid "You do not have a valid HEAD." +msgstr "Du hast keine gültige Zweigspitze (HEAD)." + +#: builtin/reset.c:79 +msgid "Failed to find tree of HEAD." +msgstr "Fehler beim Finden des Baumes der Zweigspitze (HEAD)." + +#: builtin/reset.c:85 +#, c-format +msgid "Failed to find tree of %s." +msgstr "Fehler beim Finden des Baumes von %s." + +#: builtin/reset.c:96 +msgid "Could not write new index file." +msgstr "Konnte neue Bereitstellungsdatei nicht schreiben." + +#: builtin/reset.c:106 +#, c-format +msgid "HEAD is now at %s" +msgstr "Zweigspitze (HEAD) ist jetzt bei %s" + +#: builtin/reset.c:130 +msgid "Could not read index" +msgstr "Konnte Bereitstellung nicht lesen" + +#: builtin/reset.c:133 +msgid "Unstaged changes after reset:" +msgstr "Nicht bereitgestellte Änderungen nach Zurücksetzung:" + +#: builtin/reset.c:223 +#, c-format +msgid "Cannot do a %s reset in the middle of a merge." +msgstr "" +"Kann keine %s Zurücksetzung innerhalb einer Zusammenführung durchführen." + +#: builtin/reset.c:297 +#, c-format +msgid "Could not parse object '%s'." +msgstr "Konnte Objekt '%s' nicht parsen." + +#: builtin/reset.c:302 +msgid "--patch is incompatible with --{hard,mixed,soft}" +msgstr "--patch ist inkompatibel mit --{hard,mixed,soft}" + +#: builtin/reset.c:311 +msgid "--mixed with paths is deprecated; use 'git reset -- <paths>' instead." +msgstr "" +"--mixed mit Pfaden ist veraltet; benutze stattdessen 'git reset -- <Pfade>'." + +#: builtin/reset.c:313 +#, c-format +msgid "Cannot do %s reset with paths." +msgstr "Kann keine %s Zurücksetzung mit Pfaden machen." + +#: builtin/reset.c:325 +#, c-format +msgid "%s reset is not allowed in a bare repository" +msgstr "%s Zurücksetzung ist in einem leeren Projektarchiv nicht erlaubt" + +#: builtin/reset.c:341 +#, c-format +msgid "Could not reset index file to revision '%s'." +msgstr "Konnte Bereitstellungsdatei nicht zu Revision '%s' zurücksetzen." + +#: builtin/revert.c:70 builtin/revert.c:92 +#, c-format +msgid "%s: %s cannot be used with %s" +msgstr "%s: %s kann nicht mit %s benutzt werden" + +#: builtin/revert.c:127 +msgid "program error" +msgstr "Programmfehler" + +#: builtin/revert.c:213 +msgid "revert failed" +msgstr "\"revert\" fehlgeschlagen" + +#: builtin/revert.c:228 +msgid "cherry-pick failed" +msgstr "\"cherry-pick\" fehlgeschlagen" + +#: builtin/rm.c:109 +#, c-format +msgid "" +"'%s' has staged content different from both the file and the HEAD\n" +"(use -f to force removal)" +msgstr "" +"'%s' hat bereitgestellten Inhalt unterschiedlich zu der Datei und der\n" +"Zweigspitze (HEAD) (benutze -f um die Entfernung zu erzwingen)" + +#: builtin/rm.c:115 +#, c-format +msgid "" +"'%s' has changes staged in the index\n" +"(use --cached to keep the file, or -f to force removal)" +msgstr "" +"'%s' hat Änderungen in der Bereitstellung\n" +"(benutze --cached um die Datei zu behalten, oder -f um die Entfernung zu " +"erzwingen)" + +#: builtin/rm.c:119 +#, c-format +msgid "" +"'%s' has local modifications\n" +"(use --cached to keep the file, or -f to force removal)" +msgstr "" +"'%s' hat lokale Modifikationen\n" +"(benutze --cached um die Datei zu behalten, oder -f um die Entfernung zu " +"erzwingen)" + +#: builtin/rm.c:194 +#, c-format +msgid "not removing '%s' recursively without -r" +msgstr "entferne '%s' nicht rekursiv ohne -r" + +#: builtin/rm.c:230 +#, c-format +msgid "git rm: unable to remove %s" +msgstr "git rm: konnte %s nicht entfernen" + +#: builtin/shortlog.c:157 +#, c-format +msgid "Missing author: %s" +msgstr "fehlender Autor: %s" + +#: builtin/tag.c:58 +#, c-format +msgid "malformed object at '%s'" +msgstr "fehlerhaftes Objekt bei '%s'" + +#: builtin/tag.c:205 +#, c-format +msgid "tag name too long: %.*s..." +msgstr "Markierungsname zu lang: %.*s..." + +#: builtin/tag.c:210 +#, c-format +msgid "tag '%s' not found." +msgstr "Markierung '%s' nicht gefunden." + +#: builtin/tag.c:225 +#, c-format +msgid "Deleted tag '%s' (was %s)\n" +msgstr "Gelöschte Markierung '%s' (war %s)\n" + +#: builtin/tag.c:237 +#, c-format +msgid "could not verify the tag '%s'" +msgstr "Konnte Markierung '%s' nicht verifizieren" + +#: builtin/tag.c:247 +msgid "" +"\n" +"#\n" +"# Write a tag message\n" +"# Lines starting with '#' will be ignored.\n" +"#\n" +msgstr "" +"\n" +"#\n" +"# Gebe eine Markierungsbeschreibung ein\n" +"# Zeilen beginnend mit '#' werden ignoriert.\n" +"#\n" + +#: builtin/tag.c:254 +msgid "" +"\n" +"#\n" +"# Write a tag message\n" +"# Lines starting with '#' will be kept; you may remove them yourself if you " +"want to.\n" +"#\n" +msgstr "" +"\n" +"#\n" +"# Gebe eine Markierungsbeschreibung ein\n" +"# Zeilen beginnend mit '#' werden behalten; du darfst diese selbst entfernen " +"wenn du möchtest.\n" +"#\n" + +#: builtin/tag.c:294 +msgid "unable to sign the tag" +msgstr "konnte Markierung nicht signieren" + +#: builtin/tag.c:296 +msgid "unable to write tag file" +msgstr "konnte Markierungsdatei nicht schreiben" + +#: builtin/tag.c:321 +msgid "bad object type." +msgstr "schlechter Objekt-Typ" + +#: builtin/tag.c:334 +msgid "tag header too big." +msgstr "Markierungskopf zu groß." + +#: builtin/tag.c:366 +msgid "no tag message?" +msgstr "keine Markierungsbeschreibung?" + +#: builtin/tag.c:372 +#, c-format +msgid "The tag message has been left in %s\n" +msgstr "Die Markierungsbeschreibung wurde gelassen in %s\n" + +#: builtin/tag.c:421 +msgid "switch 'points-at' requires an object" +msgstr "Wechseln von 'points-at' erfordert ein Objekt" + +#: builtin/tag.c:423 +#, c-format +msgid "malformed object name '%s'" +msgstr "fehlerhafter Objekt-Name '%s'" + +#: builtin/tag.c:502 +msgid "-n option is only allowed with -l." +msgstr "-n Option ist nur erlaubt mit -l." + +#: builtin/tag.c:504 +msgid "--contains option is only allowed with -l." +msgstr "--contains Option ist nur erlaubt mit -l." + +#: builtin/tag.c:506 +msgid "--points-at option is only allowed with -l." +msgstr "--points-at Option ist nur erlaubt mit -l." + +#: builtin/tag.c:514 +msgid "only one -F or -m option is allowed." +msgstr "nur eine -F oder -m Option ist erlaubt." + +#: builtin/tag.c:534 +msgid "too many params" +msgstr "zu viele Parameter" + +#: builtin/tag.c:540 +#, c-format +msgid "'%s' is not a valid tag name." +msgstr "'%s' ist kein gültiger Markierungsname." + +#: builtin/tag.c:545 +#, c-format +msgid "tag '%s' already exists" +msgstr "Markierung '%s' existiert bereits" + +#: builtin/tag.c:563 +#, c-format +msgid "%s: cannot lock the ref" +msgstr "%s: kann Referenz nicht sperren" + +#: builtin/tag.c:565 +#, c-format +msgid "%s: cannot update the ref" +msgstr "%s: kann Referenz nicht aktualisieren" + +#: builtin/tag.c:567 +#, c-format +msgid "Updated tag '%s' (was %s)\n" +msgstr "Aktualisierte Markierung '%s' (war %s)\n" + +#: git-am.sh:50 +msgid "You need to set your committer info first" +msgstr "Du musst zuerst die Informationen des Eintragenden setzen." + +#: git-am.sh:137 +msgid "Repository lacks necessary blobs to fall back on 3-way merge." +msgstr "" +"Dem Projektarchiv fehlen notwendige Blobs um auf eine 3-Wege-Zusammenführung " +"zurückzufallen." + +#: git-am.sh:154 +msgid "" +"Did you hand edit your patch?\n" +"It does not apply to blobs recorded in its index." +msgstr "" +"Hast du den Patch per Hand editiert?\n" +"Er kann nicht auf aufgezeichnete Blobs in seiner Bereitstellung angewendet " +"werden." + +#: git-am.sh:163 +msgid "Falling back to patching base and 3-way merge..." +msgstr "Falle zurück zum Patchen der Basis und der 3-Wege-Zusammenführung..." + +#: git-am.sh:275 +msgid "Only one StGIT patch series can be applied at once" +msgstr "Es kann nur eine StGIT Patch-Serie auf einmal angewendet werden." + +#: git-am.sh:362 +#, sh-format +msgid "Patch format $patch_format is not supported." +msgstr "Patch-Format $patch_format wird nicht unterstützt." + +#: git-am.sh:364 +msgid "Patch format detection failed." +msgstr "Patch-Formaterkennung fehlgeschlagen." + +#: git-am.sh:418 +msgid "-d option is no longer supported. Do not use." +msgstr "-d Option wird nicht länger unterstützt. Nicht benutzen." + +#: git-am.sh:481 +#, sh-format +msgid "previous rebase directory $dotest still exists but mbox given." +msgstr "" +"Vorheriges Verzeichnis des Neuaufbaus $dotest existiert noch, aber mbox " +"gegeben." + +#: git-am.sh:486 +msgid "Please make up your mind. --skip or --abort?" +msgstr "Bitte werde dir klar. --skip oder --abort?" + +#: git-am.sh:513 +msgid "Resolve operation not in progress, we are not resuming." +msgstr "keine Auflösung in Durchführung, wir setzen nicht fort." + +#: git-am.sh:579 +#, sh-format +msgid "Dirty index: cannot apply patches (dirty: $files)" +msgstr "" +"Unsaubere Bereitstellung: kann Patches nicht anwenden (unsauber: $files)" + +#: git-am.sh:755 +msgid "cannot be interactive without stdin connected to a terminal." +msgstr "" +"Kann nicht interaktiv sein, ohne das die Standard-Eingabe mit einem Terminal " +"verbunden ist." + +#. TRANSLATORS: Make sure to include [y], [n], [e], [v] and [a] +#. in your translation. The program will only accept English +#. input at this point. +#: git-am.sh:766 +msgid "Apply? [y]es/[n]o/[e]dit/[v]iew patch/[a]ccept all " +msgstr "Anwenden? [y]es/[n]o/[e]dit/[v]iew patch/[a]ccept all " + +#: git-am.sh:802 +#, sh-format +msgid "Applying: $FIRSTLINE" +msgstr "Wende an: $FIRSTLINE" + +#: git-am.sh:847 +msgid "No changes -- Patch already applied." +msgstr "Keine Änderungen -- Patches bereits angewendet." + +#: git-am.sh:873 +msgid "applying to an empty history" +msgstr "wende zu leerer Historie an" + +#. TRANSLATORS: Make sure to include [Y] and [n] in your +#. translation. The program will only accept English input +#. at this point. +#: git-bisect.sh:54 +msgid "Do you want me to do it for you [Y/n]? " +msgstr "Willst du, dass ich es für dich mache [Y/n]? " + +#: git-bisect.sh:95 +#, sh-format +msgid "unrecognised option: '$arg'" +msgstr "nicht erkannte Option: '$arg'" + +#: git-bisect.sh:99 +#, sh-format +msgid "'$arg' does not appear to be a valid revision" +msgstr "'$arg' scheint keine gültige Option zu sein" + +#: git-bisect.sh:117 +msgid "Bad HEAD - I need a HEAD" +msgstr "Schlechte Zweigspitze (HEAD) - Ich brauche eine Zweigspitze (HEAD)" + +#: git-bisect.sh:130 +#, sh-format +msgid "" +"Checking out '$start_head' failed. Try 'git bisect reset <validbranch>'." +msgstr "" +"Auschecken von '$start_head' fehlgeschlagen. Versuche 'git bisect reset " +"<gueltigerzweig>'." + +#: git-bisect.sh:140 +msgid "won't bisect on seeked tree" +msgstr "werde nicht auf gesuchtem Baum halbieren" + +#: git-bisect.sh:144 +msgid "Bad HEAD - strange symbolic ref" +msgstr "Schlechte Zweigspitze (HEAD) - merkwürdige symbolische Referenz" + +#: git-bisect.sh:189 +#, sh-format +msgid "Bad bisect_write argument: $state" +msgstr "Schlechtes \"bisect_write\" Argument: $state" + +#: git-bisect.sh:218 +#, sh-format +msgid "Bad rev input: $arg" +msgstr "Schlechte Referenz-Eingabe: $arg" + +#: git-bisect.sh:232 +msgid "Please call 'bisect_state' with at least one argument." +msgstr "Bitte rufe 'bisect_state' mit mindestens einem Argument." + +#: git-bisect.sh:244 +#, sh-format +msgid "Bad rev input: $rev" +msgstr "Schlechte Referenz-Eingabe: $rev" + +#: git-bisect.sh:250 +msgid "'git bisect bad' can take only one argument." +msgstr "'git bisect bad' kann nur ein Argument entgegennehmen." + +#. TRANSLATORS: Make sure to include [Y] and [n] in your +#. translation. The program will only accept English input +#. at this point. +#: git-bisect.sh:279 +msgid "Are you sure [Y/n]? " +msgstr "Bist du sicher [Y/n]? " + +#: git-bisect.sh:354 +#, sh-format +msgid "'$invalid' is not a valid commit" +msgstr "'$invalid' ist keine gültige Version" + +#: git-bisect.sh:363 +#, sh-format +msgid "" +"Could not check out original HEAD '$branch'.\n" +"Try 'git bisect reset <commit>'." +msgstr "" +"Konnte die originale Zweigspitze (HEAD) '$branch' nicht auschecken.\n" +"Versuche 'git bisect reset <Version>'." + +#: git-bisect.sh:390 +msgid "No logfile given" +msgstr "Keine Log-Datei gegeben" + +#: git-bisect.sh:391 +#, sh-format +msgid "cannot read $file for replaying" +msgstr "kann $file nicht für das Abspielen lesen" + +#: git-bisect.sh:408 +msgid "?? what are you talking about?" +msgstr "?? Was redest du da?" + +#: git-bisect.sh:474 +msgid "We are not bisecting." +msgstr "Wir sind nicht beim Halbieren." + +#: git-pull.sh:21 +msgid "" +"Pull is not possible because you have unmerged files.\n" +"Please, fix them up in the work tree, and then use 'git add/rm <file>'\n" +"as appropriate to mark resolution, or use 'git commit -a'." +msgstr "" +"\"pull\" ist nicht möglich weil du nicht zusammengeführte Dateien hast.\n" +"Bitte korrigiere dies im Arbeitsbaum und benutze dann 'git add/rm <Datei>'\n" +"wie vorgesehen, um die Auflösung zu markieren, oder benutze 'git commit -a'." + +#: git-pull.sh:25 +msgid "Pull is not possible because you have unmerged files." +msgstr "" +"\"pull\" ist nicht möglich, weil du nicht zusammengeführte Dateien hast." + +#: git-pull.sh:197 +msgid "updating an unborn branch with changes added to the index" +msgstr "" +"Aktualisiere eine ungeborenen Zweig mit Änderungen, die zur Bereitstellung " +"hinzugefügt wurden" + +#: git-pull.sh:253 +msgid "Cannot merge multiple branches into empty head" +msgstr "Kann nicht mehrere Zweige in einen leeren Kopf zusammenführen" + +#: git-pull.sh:257 +msgid "Cannot rebase onto multiple branches" +msgstr "kann nicht auf mehrere Zweige neu aufbauen" + +#: git-stash.sh:51 +msgid "git stash clear with parameters is unimplemented" +msgstr "git stash clear mit Parametern ist nicht implementiert" + +#: git-stash.sh:74 +msgid "You do not have the initial commit yet" +msgstr "Du hast bisher noch keine initiale Version" + +#: git-stash.sh:89 +msgid "Cannot save the current index state" +msgstr "Kann den aktuellen Zustand der Bereitstellung nicht speichern" + +#: git-stash.sh:123 git-stash.sh:136 +msgid "Cannot save the current worktree state" +msgstr "Kann den aktuellen Zustand des Arbeitsbaumes nicht speichern" + +#: git-stash.sh:140 +msgid "No changes selected" +msgstr "Keine Änderungen ausgewählt" + +#: git-stash.sh:143 +msgid "Cannot remove temporary index (can't happen)" +msgstr "Kann temporäre Bereitstellung nicht entfernen (kann nicht passieren)" + +#: git-stash.sh:156 +msgid "Cannot record working tree state" +msgstr "Kann Zustand des Arbeitsbaumes nicht aufzeichnen" + +#: git-stash.sh:223 +msgid "No local changes to save" +msgstr "Keine lokalen Änderungen zum Speichern" + +#: git-stash.sh:227 +msgid "Cannot initialize stash" +msgstr "Kann \"stash\" nicht initialisieren" + +#: git-stash.sh:235 +msgid "Cannot save the current status" +msgstr "Kann den aktuellen Status nicht speichern" + +#: git-stash.sh:253 +msgid "Cannot remove worktree changes" +msgstr "Kann Änderungen am Arbeitsbaum nicht entfernen" + +#: git-stash.sh:352 +msgid "No stash found." +msgstr "Kein \"stash\" gefunden." + +#: git-stash.sh:359 +#, sh-format +msgid "Too many revisions specified: $REV" +msgstr "Zu viele Revisionen spezifiziert: $REV" + +#: git-stash.sh:365 +#, sh-format +msgid "$reference is not valid reference" +msgstr "$reference ist keine gültige Referenz" + +#: git-stash.sh:393 +#, sh-format +msgid "'$args' is not a stash-like commit" +msgstr "'$args' ist keine \"stash\"-artiger Version" + +#: git-stash.sh:404 +#, sh-format +msgid "'$args' is not a stash reference" +msgstr "'$args' ist keine \"stash\"-Referenz" + +#: git-stash.sh:412 +msgid "unable to refresh index" +msgstr "unfähig die Bereitstellung zu aktualisieren" + +#: git-stash.sh:416 +msgid "Cannot apply a stash in the middle of a merge" +msgstr "Kann keinen \"stash\" innerhalb einer Zusammenführung anwenden" + +#: git-stash.sh:424 +msgid "Conflicts in index. Try without --index." +msgstr "Konflikte in der Bereitstellung. Versuche es ohne --index." + +#: git-stash.sh:426 +msgid "Could not save index tree" +msgstr "Konnte Bereitstellungsbaum nicht speichern" + +#: git-stash.sh:460 +msgid "Cannot unstage modified files" +msgstr "Kann geänderte Dateien nicht aus der Bereitstellung herausnehmen" + +#: git-stash.sh:491 +#, sh-format +msgid "Dropped ${REV} ($s)" +msgstr "Gelöscht ${REV} ($s)" + +#: git-stash.sh:492 +#, sh-format +msgid "${REV}: Could not drop stash entry" +msgstr "${REV}: Konnte \"stash\"-Eintrag nicht löschen" + +#: git-stash.sh:499 +msgid "No branch name specified" +msgstr "Kein Zweigname spezifiziert" + +#: git-stash.sh:570 +msgid "(To restore them type \"git stash apply\")" +msgstr "(Um es wiederherzustellen schreibe \"git stash apply\")" + +#: git-submodule.sh:56 +#, sh-format +msgid "cannot strip one component off url '$remoteurl'" +msgstr "Kann eine Komponente von URL '$remoteurl' nicht abstreifen" + +#: git-submodule.sh:109 +#, sh-format +msgid "No submodule mapping found in .gitmodules for path '$sm_path'" +msgstr "Keine Unterprojekt-Zuordnung in .gitmodules für Pfad '$sm_path' gefunden" + +#: git-submodule.sh:150 +#, sh-format +msgid "Clone of '$url' into submodule path '$sm_path' failed" +msgstr "Klonen von '$url' in Unterprojekt-Pfad '$sm_path' fehlgeschlagen" + +#: git-submodule.sh:160 +#, sh-format +msgid "Gitdir '$a' is part of the submodule path '$b' or vice versa" +msgstr "" +"Git-Verzeichnis '$a' ist Teil des Unterprojekt-Pfades '$b' oder umgekehrt" + +#: git-submodule.sh:249 +#, sh-format +msgid "repo URL: '$repo' must be absolute or begin with ./|../" +msgstr "repo URL: '$repo' muss absolut sein oder mit ./|../ beginnen" + +#: git-submodule.sh:266 +#, sh-format +msgid "'$sm_path' already exists in the index" +msgstr "'$sm_path' existiert bereits in der Bereitstellung" + +#: git-submodule.sh:283 +#, sh-format +msgid "'$sm_path' already exists and is not a valid git repo" +msgstr "'$sm_path' existiert bereits und ist kein gültiges Git-Projektarchiv" + +#: git-submodule.sh:297 +#, sh-format +msgid "Unable to checkout submodule '$sm_path'" +msgstr "Unfähig Unterprojekt '$sm_path' auszuchecken" + +#: git-submodule.sh:302 +#, sh-format +msgid "Failed to add submodule '$sm_path'" +msgstr "Hinzufügen von Unterprojekt '$sm_path' fehlgeschlagen" + +#: git-submodule.sh:307 +#, sh-format +msgid "Failed to register submodule '$sm_path'" +msgstr "Registierung von Unterprojekt '$sm_path' fehlgeschlagen" + +#: git-submodule.sh:349 +#, sh-format +msgid "Entering '$prefix$sm_path'" +msgstr "Betrete '$prefix$sm_path'" + +#: git-submodule.sh:363 +#, sh-format +msgid "Stopping at '$sm_path'; script returned non-zero status." +msgstr "Stoppe bei '$sm_path'; Skript gab nicht-Null Status zurück." + +#: git-submodule.sh:405 +#, sh-format +msgid "No url found for submodule path '$sm_path' in .gitmodules" +msgstr "Keine URL für Unterprojekt-Pfad '$sm_path' in .gitmodules gefunden" + +#: git-submodule.sh:414 +#, sh-format +msgid "Failed to register url for submodule path '$sm_path'" +msgstr "Fehler beim Registrieren der URL für Unterprojekt-Pfad '$sm_path'" + +#: git-submodule.sh:422 +#, sh-format +msgid "Failed to register update mode for submodule path '$sm_path'" +msgstr "" +"Fehler beim Registrieren des Aktualisierungsmodus für Unterprojekt-Pfad " +"'$sm_path'" + +#: git-submodule.sh:424 +#, sh-format +msgid "Submodule '$name' ($url) registered for path '$sm_path'" +msgstr "Unterprojekt '$name' ($url) registriert für Pfad '$sm_path'" + +#: git-submodule.sh:523 +#, sh-format +msgid "" +"Submodule path '$sm_path' not initialized\n" +"Maybe you want to use 'update --init'?" +msgstr "" +"Unterprojekt-Pfad '$sm_path' nicht initialisiert\n" +"Vielleicht möchtest du 'update --init' benutzen?" + +#: git-submodule.sh:536 +#, sh-format +msgid "Unable to find current revision in submodule path '$sm_path'" +msgstr "Konnte aktuelle Revision in Unterprojekt-Pfad '$sm_path' nicht finden" + +#: git-submodule.sh:555 +#, sh-format +msgid "Unable to fetch in submodule path '$sm_path'" +msgstr "Konnte in Unterprojekt-Pfad '$sm_path' nicht anfordern" + +#: git-submodule.sh:569 +#, sh-format +msgid "Unable to rebase '$sha1' in submodule path '$sm_path'" +msgstr "Neuaufbau von '$sha1' in Unterprojekt-Pfad '$sm_path' nicht möglich" + +#: git-submodule.sh:570 +#, sh-format +msgid "Submodule path '$sm_path': rebased into '$sha1'" +msgstr "Unterprojekt-Pfad '$sm_path': neu aufgebaut in '$sha1'" + +#: git-submodule.sh:575 +#, sh-format +msgid "Unable to merge '$sha1' in submodule path '$sm_path'" +msgstr "Konnte '$sha1' nicht in Unterprojekt-Pfad '$sm_path' zusammenführen" + +#: git-submodule.sh:576 +#, sh-format +msgid "Submodule path '$sm_path': merged in '$sha1'" +msgstr "Unterprojekt-Pfad '$sm_path': zusammengeführt in '$sha1'" + +#: git-submodule.sh:581 +#, sh-format +msgid "Unable to checkout '$sha1' in submodule path '$sm_path'" +msgstr "Konnte '$sha1' in Unterprojekt-Pfad '$sm_path' nicht auschecken." + +#: git-submodule.sh:582 +#, sh-format +msgid "Submodule path '$sm_path': checked out '$sha1'" +msgstr "Unterprojekt-Pfad: '$sm_path': '$sha1' ausgecheckt" + +#: git-submodule.sh:604 git-submodule.sh:927 +#, sh-format +msgid "Failed to recurse into submodule path '$sm_path'" +msgstr "Fehler bei Rekursion in Unterprojekt-Pfad '$sm_path'" + +#: git-submodule.sh:712 +msgid "--" +msgstr "--" + +#: git-submodule.sh:770 +#, sh-format +msgid " Warn: $name doesn't contain commit $sha1_src" +msgstr " Warnung: $name beinhaltet nicht Version $sha1_src" + +#: git-submodule.sh:773 +#, sh-format +msgid " Warn: $name doesn't contain commit $sha1_dst" +msgstr " Warnung: $name beinhaltet nicht Version $sha1_dst" + +#: git-submodule.sh:776 +#, sh-format +msgid " Warn: $name doesn't contain commits $sha1_src and $sha1_dst" +msgstr " Warnung: $name beinhaltet nich die Versionen $sha1_src und $sha1_dst" + +#: git-submodule.sh:801 +msgid "blob" +msgstr "Blob" + +#: git-submodule.sh:802 +msgid "submodule" +msgstr "Unterprojekt" + +#: git-submodule.sh:973 +#, sh-format +msgid "Synchronizing submodule url for '$name'" +msgstr "Synchronisiere Unterprojekt-URL für '$name'" @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: Git Mailing List <git@vger.kernel.org>\n" -"POT-Creation-Date: 2012-03-16 20:18+0800\n" +"POT-Creation-Date: 2012-04-28 20:17+0800\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n" "Language-Team: LANGUAGE <LL@li.org>\n" @@ -18,7 +18,7 @@ msgstr "" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n" -#: advice.c:34 +#: advice.c:40 #, c-format msgid "hint: %.*s\n" msgstr "" @@ -27,7 +27,7 @@ msgstr "" #. * Message used both when 'git commit' fails and when #. * other commands doing a merge do. #. -#: advice.c:64 +#: advice.c:70 msgid "" "Fix them up in the work tree,\n" "and then use 'git add/rm <file>' as\n" @@ -35,12 +35,12 @@ msgid "" "or use 'git commit -a'." msgstr "" -#: commit.c:47 +#: commit.c:48 #, c-format msgid "could not parse %s" msgstr "" -#: commit.c:49 +#: commit.c:50 #, c-format msgid "%s %s is not a commit!" msgstr "" @@ -80,32 +80,32 @@ msgid "" "%s" msgstr "" -#: diff.c:1336 +#: diff.c:1400 msgid " 0 files changed\n" msgstr "" -#: diff.c:1340 +#: diff.c:1404 #, c-format msgid " %d file changed" msgid_plural " %d files changed" msgstr[0] "" msgstr[1] "" -#: diff.c:1357 +#: diff.c:1421 #, c-format msgid ", %d insertion(+)" msgid_plural ", %d insertions(+)" msgstr[0] "" msgstr[1] "" -#: diff.c:1368 +#: diff.c:1432 #, c-format msgid ", %d deletion(-)" msgid_plural ", %d deletions(-)" msgstr[0] "" msgstr[1] "" -#: diff.c:3424 +#: diff.c:3435 #, c-format msgid "" "Failed to parse --dirstat/-X option parameter:\n" @@ -172,14 +172,14 @@ msgid_plural "" msgstr[0] "" msgstr[1] "" -#: sequencer.c:120 builtin/merge.c:864 builtin/merge.c:985 -#: builtin/merge.c:1095 builtin/merge.c:1105 +#: sequencer.c:120 builtin/merge.c:865 builtin/merge.c:978 +#: builtin/merge.c:1088 builtin/merge.c:1098 #, c-format msgid "Could not open '%s' for writing" msgstr "" -#: sequencer.c:122 builtin/merge.c:334 builtin/merge.c:867 -#: builtin/merge.c:1097 builtin/merge.c:1110 +#: sequencer.c:122 builtin/merge.c:333 builtin/merge.c:868 +#: builtin/merge.c:1090 builtin/merge.c:1103 #, c-format msgid "Could not write to '%s'" msgstr "" @@ -270,8 +270,8 @@ msgstr "" msgid "could not apply %s... %s" msgstr "" -#: sequencer.c:450 sequencer.c:909 builtin/log.c:288 builtin/log.c:713 -#: builtin/log.c:1329 builtin/log.c:1548 builtin/merge.c:348 +#: sequencer.c:450 sequencer.c:909 builtin/log.c:289 builtin/log.c:719 +#: builtin/log.c:1335 builtin/log.c:1554 builtin/merge.c:347 #: builtin/shortlog.c:181 msgid "revision walk setup failed" msgstr "" @@ -396,6 +396,25 @@ msgstr "" msgid "Can't cherry-pick into empty head" msgstr "" +#: sha1_name.c:864 +msgid "HEAD does not point to a branch" +msgstr "" + +#: sha1_name.c:867 +#, c-format +msgid "No such branch: '%s'" +msgstr "" + +#: sha1_name.c:869 +#, c-format +msgid "No upstream configured for branch '%s'" +msgstr "" + +#: sha1_name.c:872 +#, c-format +msgid "Upstream branch '%s' not stored as a remote-tracking branch" +msgstr "" + #: wt-status.c:134 msgid "Unmerged paths:" msgstr "" @@ -779,128 +798,128 @@ msgid "" msgstr "" #. TRANSLATORS: This is "remote " in "remote branch '%s' not found" -#: builtin/branch.c:163 +#: builtin/branch.c:164 msgid "remote " msgstr "" -#: builtin/branch.c:171 +#: builtin/branch.c:172 msgid "cannot use -a with -d" msgstr "" -#: builtin/branch.c:177 +#: builtin/branch.c:178 msgid "Couldn't look up commit object for HEAD" msgstr "" -#: builtin/branch.c:182 +#: builtin/branch.c:183 #, c-format msgid "Cannot delete the branch '%s' which you are currently on." msgstr "" -#: builtin/branch.c:192 +#: builtin/branch.c:193 #, c-format msgid "%sbranch '%s' not found." msgstr "" -#: builtin/branch.c:200 +#: builtin/branch.c:201 #, c-format msgid "Couldn't look up commit object for '%s'" msgstr "" -#: builtin/branch.c:206 +#: builtin/branch.c:207 #, c-format msgid "" "The branch '%s' is not fully merged.\n" "If you are sure you want to delete it, run 'git branch -D %s'." msgstr "" -#: builtin/branch.c:214 +#: builtin/branch.c:215 #, c-format msgid "Error deleting %sbranch '%s'" msgstr "" -#: builtin/branch.c:219 +#: builtin/branch.c:221 #, c-format msgid "Deleted %sbranch %s (was %s).\n" msgstr "" -#: builtin/branch.c:224 +#: builtin/branch.c:226 msgid "Update of config-file failed" msgstr "" -#: builtin/branch.c:322 +#: builtin/branch.c:324 #, c-format msgid "branch '%s' does not point at a commit" msgstr "" -#: builtin/branch.c:394 +#: builtin/branch.c:396 #, c-format msgid "behind %d] " msgstr "" -#: builtin/branch.c:396 +#: builtin/branch.c:398 #, c-format msgid "ahead %d] " msgstr "" -#: builtin/branch.c:398 +#: builtin/branch.c:400 #, c-format msgid "ahead %d, behind %d] " msgstr "" -#: builtin/branch.c:501 +#: builtin/branch.c:503 msgid "(no branch)" msgstr "" -#: builtin/branch.c:566 +#: builtin/branch.c:568 msgid "some refs could not be read" msgstr "" -#: builtin/branch.c:579 +#: builtin/branch.c:581 msgid "cannot rename the current branch while not on any." msgstr "" -#: builtin/branch.c:589 +#: builtin/branch.c:591 #, c-format msgid "Invalid branch name: '%s'" msgstr "" -#: builtin/branch.c:604 +#: builtin/branch.c:606 msgid "Branch rename failed" msgstr "" -#: builtin/branch.c:608 +#: builtin/branch.c:610 #, c-format msgid "Renamed a misnamed branch '%s' away" msgstr "" -#: builtin/branch.c:612 +#: builtin/branch.c:614 #, c-format msgid "Branch renamed to %s, but HEAD is not updated!" msgstr "" -#: builtin/branch.c:619 +#: builtin/branch.c:621 msgid "Branch is renamed, but update of config-file failed" msgstr "" -#: builtin/branch.c:634 +#: builtin/branch.c:636 #, c-format msgid "malformed object name %s" msgstr "" -#: builtin/branch.c:658 +#: builtin/branch.c:660 #, c-format msgid "could not write branch description template: %s\n" msgstr "" -#: builtin/branch.c:746 +#: builtin/branch.c:750 msgid "Failed to resolve HEAD as a valid ref." msgstr "" -#: builtin/branch.c:751 builtin/clone.c:558 +#: builtin/branch.c:755 builtin/clone.c:558 msgid "HEAD not found below refs/heads!" msgstr "" -#: builtin/branch.c:809 +#: builtin/branch.c:813 msgid "-a and -r options to 'git branch' do not make sense with a branch name" msgstr "" @@ -962,7 +981,7 @@ msgid "path '%s' is unmerged" msgstr "" #: builtin/checkout.c:302 builtin/checkout.c:498 builtin/clone.c:583 -#: builtin/merge.c:811 +#: builtin/merge.c:812 msgid "unable to write new index file" msgstr "" @@ -979,42 +998,42 @@ msgstr "" msgid "Can not do reflog for '%s'\n" msgstr "" -#: builtin/checkout.c:565 +#: builtin/checkout.c:566 msgid "HEAD is now at" msgstr "" -#: builtin/checkout.c:572 +#: builtin/checkout.c:573 #, c-format msgid "Reset branch '%s'\n" msgstr "" -#: builtin/checkout.c:575 +#: builtin/checkout.c:576 #, c-format msgid "Already on '%s'\n" msgstr "" -#: builtin/checkout.c:579 +#: builtin/checkout.c:580 #, c-format msgid "Switched to and reset branch '%s'\n" msgstr "" -#: builtin/checkout.c:581 +#: builtin/checkout.c:582 #, c-format msgid "Switched to a new branch '%s'\n" msgstr "" -#: builtin/checkout.c:583 +#: builtin/checkout.c:584 #, c-format msgid "Switched to branch '%s'\n" msgstr "" -#: builtin/checkout.c:639 +#: builtin/checkout.c:640 #, c-format msgid " ... and %d more.\n" msgstr "" #. The singular version -#: builtin/checkout.c:645 +#: builtin/checkout.c:646 #, c-format msgid "" "Warning: you are leaving %d commit behind, not connected to\n" @@ -1029,7 +1048,7 @@ msgid_plural "" msgstr[0] "" msgstr[1] "" -#: builtin/checkout.c:663 +#: builtin/checkout.c:664 #, c-format msgid "" "If you want to keep them by creating a new branch, this may be a good time\n" @@ -1039,96 +1058,96 @@ msgid "" "\n" msgstr "" -#: builtin/checkout.c:692 +#: builtin/checkout.c:693 msgid "internal error in revision walk" msgstr "" -#: builtin/checkout.c:696 +#: builtin/checkout.c:697 msgid "Previous HEAD position was" msgstr "" -#: builtin/checkout.c:722 +#: builtin/checkout.c:723 msgid "You are on a branch yet to be born" msgstr "" #. case (1) -#: builtin/checkout.c:853 +#: builtin/checkout.c:854 #, c-format msgid "invalid reference: %s" msgstr "" #. case (1): want a tree -#: builtin/checkout.c:892 +#: builtin/checkout.c:893 #, c-format msgid "reference is not a tree: %s" msgstr "" -#: builtin/checkout.c:972 +#: builtin/checkout.c:973 msgid "-B cannot be used with -b" msgstr "" -#: builtin/checkout.c:981 +#: builtin/checkout.c:982 msgid "--patch is incompatible with all other options" msgstr "" -#: builtin/checkout.c:984 +#: builtin/checkout.c:985 msgid "--detach cannot be used with -b/-B/--orphan" msgstr "" -#: builtin/checkout.c:986 +#: builtin/checkout.c:987 msgid "--detach cannot be used with -t" msgstr "" -#: builtin/checkout.c:992 +#: builtin/checkout.c:993 msgid "--track needs a branch name" msgstr "" -#: builtin/checkout.c:999 +#: builtin/checkout.c:1000 msgid "Missing branch name; try -b" msgstr "" -#: builtin/checkout.c:1005 +#: builtin/checkout.c:1006 msgid "--orphan and -b|-B are mutually exclusive" msgstr "" -#: builtin/checkout.c:1007 +#: builtin/checkout.c:1008 msgid "--orphan cannot be used with -t" msgstr "" -#: builtin/checkout.c:1017 +#: builtin/checkout.c:1018 msgid "git checkout: -f and -m are incompatible" msgstr "" -#: builtin/checkout.c:1051 +#: builtin/checkout.c:1052 msgid "invalid path specification" msgstr "" -#: builtin/checkout.c:1059 +#: builtin/checkout.c:1060 #, c-format msgid "" "git checkout: updating paths is incompatible with switching branches.\n" "Did you intend to checkout '%s' which can not be resolved as commit?" msgstr "" -#: builtin/checkout.c:1061 +#: builtin/checkout.c:1062 msgid "git checkout: updating paths is incompatible with switching branches." msgstr "" -#: builtin/checkout.c:1066 +#: builtin/checkout.c:1067 msgid "git checkout: --detach does not take a path argument" msgstr "" -#: builtin/checkout.c:1069 +#: builtin/checkout.c:1070 msgid "" "git checkout: --ours/--theirs, --force and --merge are incompatible when\n" "checking out of the index." msgstr "" -#: builtin/checkout.c:1088 +#: builtin/checkout.c:1089 msgid "Cannot switch branch to a non-commit." msgstr "" -#: builtin/checkout.c:1091 +#: builtin/checkout.c:1092 msgid "--ours/--theirs is incompatible with switching branches." msgstr "" @@ -1365,66 +1384,66 @@ msgstr "" msgid "unable to write temporary index file" msgstr "" -#: builtin/commit.c:550 builtin/commit.c:556 +#: builtin/commit.c:561 builtin/commit.c:567 #, c-format msgid "invalid commit: %s" msgstr "" -#: builtin/commit.c:579 +#: builtin/commit.c:590 msgid "malformed --author parameter" msgstr "" -#: builtin/commit.c:635 +#: builtin/commit.c:651 #, c-format msgid "Malformed ident string: '%s'" msgstr "" -#: builtin/commit.c:670 builtin/commit.c:703 builtin/commit.c:1000 +#: builtin/commit.c:689 builtin/commit.c:722 builtin/commit.c:1033 #, c-format msgid "could not lookup commit %s" msgstr "" -#: builtin/commit.c:682 builtin/shortlog.c:296 +#: builtin/commit.c:701 builtin/shortlog.c:296 #, c-format msgid "(reading log message from standard input)\n" msgstr "" -#: builtin/commit.c:684 +#: builtin/commit.c:703 msgid "could not read log from standard input" msgstr "" -#: builtin/commit.c:688 +#: builtin/commit.c:707 #, c-format msgid "could not read log file '%s'" msgstr "" -#: builtin/commit.c:694 +#: builtin/commit.c:713 msgid "commit has empty message" msgstr "" -#: builtin/commit.c:710 +#: builtin/commit.c:729 msgid "could not read MERGE_MSG" msgstr "" -#: builtin/commit.c:714 +#: builtin/commit.c:733 msgid "could not read SQUASH_MSG" msgstr "" -#: builtin/commit.c:718 +#: builtin/commit.c:737 #, c-format msgid "could not read '%s'" msgstr "" -#: builtin/commit.c:746 +#: builtin/commit.c:765 #, c-format msgid "could not open '%s'" msgstr "" -#: builtin/commit.c:770 +#: builtin/commit.c:789 msgid "could not write commit template" msgstr "" -#: builtin/commit.c:783 +#: builtin/commit.c:799 #, c-format msgid "" "\n" @@ -1434,167 +1453,172 @@ msgid "" "and try again.\n" msgstr "" -#: builtin/commit.c:796 +#: builtin/commit.c:812 msgid "Please enter the commit message for your changes." msgstr "" -#: builtin/commit.c:799 +#: builtin/commit.c:815 msgid "" " Lines starting\n" "with '#' will be ignored, and an empty message aborts the commit.\n" msgstr "" -#: builtin/commit.c:804 +#: builtin/commit.c:820 msgid "" " Lines starting\n" "with '#' will be kept; you may remove them yourself if you want to.\n" "An empty message aborts the commit.\n" msgstr "" -#: builtin/commit.c:816 +#: builtin/commit.c:832 #, c-format msgid "%sAuthor: %s" msgstr "" -#: builtin/commit.c:823 +#: builtin/commit.c:839 #, c-format msgid "%sCommitter: %s" msgstr "" -#: builtin/commit.c:843 +#: builtin/commit.c:859 msgid "Cannot read index" msgstr "" -#: builtin/commit.c:880 +#: builtin/commit.c:896 msgid "Error building trees" msgstr "" -#: builtin/commit.c:895 builtin/tag.c:357 +#: builtin/commit.c:911 builtin/tag.c:357 #, c-format msgid "Please supply the message using either -m or -F option.\n" msgstr "" -#: builtin/commit.c:975 +#: builtin/commit.c:1008 #, c-format msgid "No existing author found with '%s'" msgstr "" -#: builtin/commit.c:990 builtin/commit.c:1182 +#: builtin/commit.c:1023 builtin/commit.c:1217 #, c-format msgid "Invalid untracked files mode '%s'" msgstr "" -#: builtin/commit.c:1030 +#: builtin/commit.c:1063 msgid "Using both --reset-author and --author does not make sense" msgstr "" -#: builtin/commit.c:1041 +#: builtin/commit.c:1074 msgid "You have nothing to amend." msgstr "" -#: builtin/commit.c:1043 +#: builtin/commit.c:1076 #, c-format msgid "You are in the middle of a %s -- cannot amend." msgstr "" -#: builtin/commit.c:1045 +#: builtin/commit.c:1078 msgid "Options --squash and --fixup cannot be used together" msgstr "" -#: builtin/commit.c:1055 +#: builtin/commit.c:1088 msgid "Only one of -c/-C/-F/--fixup can be used." msgstr "" -#: builtin/commit.c:1057 +#: builtin/commit.c:1090 msgid "Option -m cannot be combined with -c/-C/-F/--fixup." msgstr "" -#: builtin/commit.c:1063 +#: builtin/commit.c:1098 msgid "--reset-author can be used only with -C, -c or --amend." msgstr "" -#: builtin/commit.c:1080 +#: builtin/commit.c:1115 msgid "Only one of --include/--only/--all/--interactive/--patch can be used." msgstr "" -#: builtin/commit.c:1082 +#: builtin/commit.c:1117 msgid "No paths with --include/--only does not make sense." msgstr "" -#: builtin/commit.c:1084 +#: builtin/commit.c:1119 msgid "Clever... amending the last one with dirty index." msgstr "" -#: builtin/commit.c:1086 +#: builtin/commit.c:1121 msgid "Explicit paths specified without -i nor -o; assuming --only paths..." msgstr "" -#: builtin/commit.c:1096 builtin/tag.c:556 +#: builtin/commit.c:1131 builtin/tag.c:556 #, c-format msgid "Invalid cleanup mode %s" msgstr "" -#: builtin/commit.c:1101 +#: builtin/commit.c:1136 msgid "Paths with -a does not make sense." msgstr "" -#: builtin/commit.c:1280 +#: builtin/commit.c:1315 msgid "couldn't look up newly created commit" msgstr "" -#: builtin/commit.c:1282 +#: builtin/commit.c:1317 msgid "could not parse newly created commit" msgstr "" -#: builtin/commit.c:1323 +#: builtin/commit.c:1358 msgid "detached HEAD" msgstr "" -#: builtin/commit.c:1325 +#: builtin/commit.c:1360 msgid " (root-commit)" msgstr "" -#: builtin/commit.c:1415 +#: builtin/commit.c:1450 msgid "could not parse HEAD commit" msgstr "" -#: builtin/commit.c:1452 builtin/merge.c:509 +#: builtin/commit.c:1487 builtin/merge.c:509 #, c-format msgid "could not open '%s' for reading" msgstr "" -#: builtin/commit.c:1459 +#: builtin/commit.c:1494 #, c-format msgid "Corrupt MERGE_HEAD file (%s)" msgstr "" -#: builtin/commit.c:1466 +#: builtin/commit.c:1501 msgid "could not read MERGE_MODE" msgstr "" -#: builtin/commit.c:1485 +#: builtin/commit.c:1520 #, c-format msgid "could not read commit message: %s" msgstr "" -#: builtin/commit.c:1499 +#: builtin/commit.c:1534 +#, c-format +msgid "Aborting commit; you did not edit the message.\n" +msgstr "" + +#: builtin/commit.c:1539 #, c-format msgid "Aborting commit due to empty commit message.\n" msgstr "" -#: builtin/commit.c:1514 builtin/merge.c:935 builtin/merge.c:968 +#: builtin/commit.c:1554 builtin/merge.c:936 builtin/merge.c:961 msgid "failed to write commit object" msgstr "" -#: builtin/commit.c:1535 +#: builtin/commit.c:1575 msgid "cannot lock HEAD ref" msgstr "" -#: builtin/commit.c:1539 +#: builtin/commit.c:1579 msgid "cannot update HEAD ref" msgstr "" -#: builtin/commit.c:1550 +#: builtin/commit.c:1590 msgid "" "Repository has been updated, but unable to write\n" "new_index file. Check that disk is not full or quota is\n" @@ -1717,146 +1741,150 @@ msgstr "" msgid "Couldn't find remote ref HEAD" msgstr "" -#: builtin/fetch.c:252 +#: builtin/fetch.c:253 #, c-format msgid "object %s not found" msgstr "" -#: builtin/fetch.c:258 +#: builtin/fetch.c:259 msgid "[up to date]" msgstr "" -#: builtin/fetch.c:272 +#: builtin/fetch.c:273 #, c-format msgid "! %-*s %-*s -> %s (can't fetch in current branch)" msgstr "" -#: builtin/fetch.c:273 builtin/fetch.c:351 +#: builtin/fetch.c:274 builtin/fetch.c:360 msgid "[rejected]" msgstr "" -#: builtin/fetch.c:284 +#: builtin/fetch.c:285 msgid "[tag update]" msgstr "" -#: builtin/fetch.c:286 builtin/fetch.c:313 builtin/fetch.c:331 +#: builtin/fetch.c:287 builtin/fetch.c:322 builtin/fetch.c:340 msgid " (unable to update local ref)" msgstr "" -#: builtin/fetch.c:298 +#: builtin/fetch.c:305 msgid "[new tag]" msgstr "" -#: builtin/fetch.c:302 +#: builtin/fetch.c:308 msgid "[new branch]" msgstr "" -#: builtin/fetch.c:347 +#: builtin/fetch.c:311 +msgid "[new ref]" +msgstr "" + +#: builtin/fetch.c:356 msgid "unable to update local ref" msgstr "" -#: builtin/fetch.c:347 +#: builtin/fetch.c:356 msgid "forced update" msgstr "" -#: builtin/fetch.c:353 +#: builtin/fetch.c:362 msgid "(non-fast-forward)" msgstr "" -#: builtin/fetch.c:384 builtin/fetch.c:676 +#: builtin/fetch.c:393 builtin/fetch.c:685 #, c-format msgid "cannot open %s: %s\n" msgstr "" -#: builtin/fetch.c:393 +#: builtin/fetch.c:402 #, c-format msgid "%s did not send all necessary objects\n" msgstr "" -#: builtin/fetch.c:479 +#: builtin/fetch.c:488 #, c-format msgid "From %.*s\n" msgstr "" -#: builtin/fetch.c:490 +#: builtin/fetch.c:499 #, c-format msgid "" "some local refs could not be updated; try running\n" " 'git remote prune %s' to remove any old, conflicting branches" msgstr "" -#: builtin/fetch.c:540 +#: builtin/fetch.c:549 #, c-format msgid " (%s will become dangling)\n" msgstr "" -#: builtin/fetch.c:541 +#: builtin/fetch.c:550 #, c-format msgid " (%s has become dangling)\n" msgstr "" -#: builtin/fetch.c:548 +#: builtin/fetch.c:557 msgid "[deleted]" msgstr "" -#: builtin/fetch.c:549 +#: builtin/fetch.c:558 msgid "(none)" msgstr "" -#: builtin/fetch.c:666 +#: builtin/fetch.c:675 #, c-format msgid "Refusing to fetch into current branch %s of non-bare repository" msgstr "" -#: builtin/fetch.c:700 +#: builtin/fetch.c:709 #, c-format msgid "Don't know how to fetch from %s" msgstr "" -#: builtin/fetch.c:777 +#: builtin/fetch.c:786 #, c-format msgid "Option \"%s\" value \"%s\" is not valid for %s" msgstr "" -#: builtin/fetch.c:780 +#: builtin/fetch.c:789 #, c-format msgid "Option \"%s\" is ignored for %s\n" msgstr "" -#: builtin/fetch.c:879 +#: builtin/fetch.c:888 #, c-format msgid "Fetching %s\n" msgstr "" -#: builtin/fetch.c:881 +#: builtin/fetch.c:890 #, c-format msgid "Could not fetch %s" msgstr "" -#: builtin/fetch.c:898 +#: builtin/fetch.c:907 msgid "" "No remote repository specified. Please, specify either a URL or a\n" "remote name from which new revisions should be fetched." msgstr "" -#: builtin/fetch.c:918 +#: builtin/fetch.c:927 msgid "You need to specify a tag name." msgstr "" -#: builtin/fetch.c:970 +#: builtin/fetch.c:979 msgid "fetch --all does not take a repository argument" msgstr "" -#: builtin/fetch.c:972 +#: builtin/fetch.c:981 msgid "fetch --all does not make sense with refspecs" msgstr "" -#: builtin/fetch.c:983 +#: builtin/fetch.c:992 #, c-format msgid "No such remote or remote group: %s" msgstr "" -#: builtin/fetch.c:991 +#: builtin/fetch.c:1000 msgid "Fetching a group and specifying refspecs does not make sense" msgstr "" @@ -2092,163 +2120,163 @@ msgstr "" msgid "Cannot access work tree '%s'" msgstr "" -#: builtin/log.c:187 +#: builtin/log.c:188 #, c-format msgid "Final output: %d %s\n" msgstr "" -#: builtin/log.c:395 builtin/log.c:483 +#: builtin/log.c:401 builtin/log.c:489 #, c-format msgid "Could not read object %s" msgstr "" -#: builtin/log.c:507 +#: builtin/log.c:513 #, c-format msgid "Unknown type: %d" msgstr "" -#: builtin/log.c:596 +#: builtin/log.c:602 msgid "format.headers without value" msgstr "" -#: builtin/log.c:669 +#: builtin/log.c:675 msgid "name of output directory is too long" msgstr "" -#: builtin/log.c:680 +#: builtin/log.c:686 #, c-format msgid "Cannot open patch file %s" msgstr "" -#: builtin/log.c:694 +#: builtin/log.c:700 msgid "Need exactly one range." msgstr "" -#: builtin/log.c:702 +#: builtin/log.c:708 msgid "Not a range." msgstr "" -#: builtin/log.c:739 +#: builtin/log.c:745 msgid "Could not extract email from committer identity." msgstr "" -#: builtin/log.c:785 +#: builtin/log.c:791 msgid "Cover letter needs email format" msgstr "" -#: builtin/log.c:879 +#: builtin/log.c:885 #, c-format msgid "insane in-reply-to: %s" msgstr "" -#: builtin/log.c:952 +#: builtin/log.c:958 msgid "Two output directories?" msgstr "" -#: builtin/log.c:1173 +#: builtin/log.c:1179 #, c-format msgid "bogus committer info %s" msgstr "" -#: builtin/log.c:1218 +#: builtin/log.c:1224 msgid "-n and -k are mutually exclusive." msgstr "" -#: builtin/log.c:1220 +#: builtin/log.c:1226 msgid "--subject-prefix and -k are mutually exclusive." msgstr "" -#: builtin/log.c:1225 builtin/shortlog.c:284 +#: builtin/log.c:1231 builtin/shortlog.c:284 #, c-format msgid "unrecognized argument: %s" msgstr "" -#: builtin/log.c:1228 +#: builtin/log.c:1234 msgid "--name-only does not make sense" msgstr "" -#: builtin/log.c:1230 +#: builtin/log.c:1236 msgid "--name-status does not make sense" msgstr "" -#: builtin/log.c:1232 +#: builtin/log.c:1238 msgid "--check does not make sense" msgstr "" -#: builtin/log.c:1255 +#: builtin/log.c:1261 msgid "standard output, or directory, which one?" msgstr "" -#: builtin/log.c:1257 +#: builtin/log.c:1263 #, c-format msgid "Could not create directory '%s'" msgstr "" -#: builtin/log.c:1410 +#: builtin/log.c:1416 msgid "Failed to create output files" msgstr "" -#: builtin/log.c:1514 +#: builtin/log.c:1520 #, c-format msgid "" "Could not find a tracked remote branch, please specify <upstream> manually.\n" msgstr "" -#: builtin/log.c:1530 builtin/log.c:1532 builtin/log.c:1544 +#: builtin/log.c:1536 builtin/log.c:1538 builtin/log.c:1550 #, c-format msgid "Unknown commit %s" msgstr "" -#: builtin/merge.c:91 +#: builtin/merge.c:90 msgid "switch `m' requires a value" msgstr "" -#: builtin/merge.c:128 +#: builtin/merge.c:127 #, c-format msgid "Could not find merge strategy '%s'.\n" msgstr "" -#: builtin/merge.c:129 +#: builtin/merge.c:128 #, c-format msgid "Available strategies are:" msgstr "" -#: builtin/merge.c:134 +#: builtin/merge.c:133 #, c-format msgid "Available custom strategies are:" msgstr "" -#: builtin/merge.c:241 +#: builtin/merge.c:240 msgid "could not run stash." msgstr "" -#: builtin/merge.c:246 +#: builtin/merge.c:245 msgid "stash failed" msgstr "" -#: builtin/merge.c:251 +#: builtin/merge.c:250 #, c-format msgid "not a valid object: %s" msgstr "" -#: builtin/merge.c:270 builtin/merge.c:287 +#: builtin/merge.c:269 builtin/merge.c:286 msgid "read-tree failed" msgstr "" -#: builtin/merge.c:317 +#: builtin/merge.c:316 msgid " (nothing to squash)" msgstr "" -#: builtin/merge.c:330 +#: builtin/merge.c:329 #, c-format msgid "Squash commit -- not updating HEAD\n" msgstr "" -#: builtin/merge.c:362 +#: builtin/merge.c:361 msgid "Writing SQUASH_MSG" msgstr "" -#: builtin/merge.c:364 +#: builtin/merge.c:363 msgid "Finishing SQUASH_MSG" msgstr "" @@ -2275,35 +2303,35 @@ msgstr "" msgid "failed to read the cache" msgstr "" -#: builtin/merge.c:696 +#: builtin/merge.c:697 msgid "Unable to write index." msgstr "" -#: builtin/merge.c:709 +#: builtin/merge.c:710 msgid "Not handling anything other than two heads merge." msgstr "" -#: builtin/merge.c:723 +#: builtin/merge.c:724 #, c-format msgid "Unknown option for merge-recursive: -X%s" msgstr "" -#: builtin/merge.c:737 +#: builtin/merge.c:738 #, c-format msgid "unable to write %s" msgstr "" -#: builtin/merge.c:876 +#: builtin/merge.c:877 #, c-format msgid "Could not read from '%s'" msgstr "" -#: builtin/merge.c:885 +#: builtin/merge.c:886 #, c-format msgid "Not committing merge; use 'git commit' to complete the merge.\n" msgstr "" -#: builtin/merge.c:891 +#: builtin/merge.c:892 msgid "" "Please enter a commit message to explain why this merge is necessary,\n" "especially if it merges an updated upstream into a topic branch.\n" @@ -2312,140 +2340,140 @@ msgid "" "the commit.\n" msgstr "" -#: builtin/merge.c:915 +#: builtin/merge.c:916 msgid "Empty commit message." msgstr "" -#: builtin/merge.c:927 +#: builtin/merge.c:928 #, c-format msgid "Wonderful.\n" msgstr "" -#: builtin/merge.c:1000 +#: builtin/merge.c:993 #, c-format msgid "Automatic merge failed; fix conflicts and then commit the result.\n" msgstr "" -#: builtin/merge.c:1016 +#: builtin/merge.c:1009 #, c-format msgid "'%s' is not a commit" msgstr "" -#: builtin/merge.c:1057 +#: builtin/merge.c:1050 msgid "No current branch." msgstr "" -#: builtin/merge.c:1059 +#: builtin/merge.c:1052 msgid "No remote for the current branch." msgstr "" -#: builtin/merge.c:1061 +#: builtin/merge.c:1054 msgid "No default upstream defined for the current branch." msgstr "" -#: builtin/merge.c:1066 +#: builtin/merge.c:1059 #, c-format msgid "No remote tracking branch for %s from %s" msgstr "" -#: builtin/merge.c:1188 +#: builtin/merge.c:1146 builtin/merge.c:1303 +#, c-format +msgid "%s - not something we can merge" +msgstr "" + +#: builtin/merge.c:1214 msgid "There is no merge to abort (MERGE_HEAD missing)." msgstr "" -#: builtin/merge.c:1204 git-pull.sh:31 +#: builtin/merge.c:1230 git-pull.sh:31 msgid "" "You have not concluded your merge (MERGE_HEAD exists).\n" "Please, commit your changes before you can merge." msgstr "" -#: builtin/merge.c:1207 git-pull.sh:34 +#: builtin/merge.c:1233 git-pull.sh:34 msgid "You have not concluded your merge (MERGE_HEAD exists)." msgstr "" -#: builtin/merge.c:1211 +#: builtin/merge.c:1237 msgid "" "You have not concluded your cherry-pick (CHERRY_PICK_HEAD exists).\n" "Please, commit your changes before you can merge." msgstr "" -#: builtin/merge.c:1214 +#: builtin/merge.c:1240 msgid "You have not concluded your cherry-pick (CHERRY_PICK_HEAD exists)." msgstr "" -#: builtin/merge.c:1223 +#: builtin/merge.c:1249 msgid "You cannot combine --squash with --no-ff." msgstr "" -#: builtin/merge.c:1228 +#: builtin/merge.c:1254 msgid "You cannot combine --no-ff with --ff-only." msgstr "" -#: builtin/merge.c:1235 +#: builtin/merge.c:1261 msgid "No commit specified and merge.defaultToUpstream not set." msgstr "" -#: builtin/merge.c:1266 +#: builtin/merge.c:1293 msgid "Can merge only exactly one commit into empty head" msgstr "" -#: builtin/merge.c:1269 +#: builtin/merge.c:1296 msgid "Squash commit into empty head not supported yet" msgstr "" -#: builtin/merge.c:1271 +#: builtin/merge.c:1298 msgid "Non-fast-forward commit does not make sense into an empty head" msgstr "" -#: builtin/merge.c:1275 builtin/merge.c:1319 -#, c-format -msgid "%s - not something we can merge" -msgstr "" - -#: builtin/merge.c:1385 +#: builtin/merge.c:1413 #, c-format msgid "Updating %s..%s\n" msgstr "" -#: builtin/merge.c:1423 +#: builtin/merge.c:1451 #, c-format msgid "Trying really trivial in-index merge...\n" msgstr "" -#: builtin/merge.c:1430 +#: builtin/merge.c:1458 #, c-format msgid "Nope.\n" msgstr "" -#: builtin/merge.c:1462 +#: builtin/merge.c:1490 msgid "Not possible to fast-forward, aborting." msgstr "" -#: builtin/merge.c:1485 builtin/merge.c:1562 +#: builtin/merge.c:1513 builtin/merge.c:1592 #, c-format msgid "Rewinding the tree to pristine...\n" msgstr "" -#: builtin/merge.c:1489 +#: builtin/merge.c:1517 #, c-format msgid "Trying merge strategy %s...\n" msgstr "" -#: builtin/merge.c:1553 +#: builtin/merge.c:1583 #, c-format msgid "No merge strategy handled the merge.\n" msgstr "" -#: builtin/merge.c:1555 +#: builtin/merge.c:1585 #, c-format msgid "Merge with strategy %s failed.\n" msgstr "" -#: builtin/merge.c:1564 +#: builtin/merge.c:1594 #, c-format msgid "Using the %s to prepare resolving by hand.\n" msgstr "" -#: builtin/merge.c:1575 +#: builtin/merge.c:1606 #, c-format msgid "Automatic merge went well; stopped before committing as requested\n" msgstr "" @@ -2684,15 +2712,15 @@ msgstr "" msgid "unable to parse value '%s' for option %s" msgstr "" -#: builtin/push.c:44 +#: builtin/push.c:45 msgid "tag shorthand without <tag>" msgstr "" -#: builtin/push.c:63 +#: builtin/push.c:64 msgid "--delete only accepts plain target ref names" msgstr "" -#: builtin/push.c:73 +#: builtin/push.c:84 #, c-format msgid "" "You are not currently on a branch.\n" @@ -2702,7 +2730,7 @@ msgid "" " git push %s HEAD:<name-of-remote-branch>\n" msgstr "" -#: builtin/push.c:80 +#: builtin/push.c:91 #, c-format msgid "" "The current branch %s has no upstream branch.\n" @@ -2711,40 +2739,64 @@ msgid "" " git push --set-upstream %s %s\n" msgstr "" -#: builtin/push.c:88 +#: builtin/push.c:99 #, c-format msgid "The current branch %s has multiple upstream branches, refusing to push." msgstr "" -#: builtin/push.c:111 +#: builtin/push.c:102 +#, c-format msgid "" -"You didn't specify any refspecs to push, and push.default is \"nothing\"." +"You are pushing to remote '%s', which is not the upstream of\n" +"your current branch '%s', without telling me what to push\n" +"to update which remote branch." msgstr "" #: builtin/push.c:131 -#, c-format -msgid "Pushing to %s\n" +msgid "" +"You didn't specify any refspecs to push, and push.default is \"nothing\"." +msgstr "" + +#: builtin/push.c:138 +msgid "" +"Updates were rejected because the tip of your current branch is behind\n" +"its remote counterpart. Merge the remote changes (e.g. 'git pull')\n" +"before pushing again.\n" +"See the 'Note about fast-forwards' in 'git push --help' for details." +msgstr "" + +#: builtin/push.c:144 +msgid "" +"Updates were rejected because a pushed branch tip is behind its remote\n" +"counterpart. If you did not intend to push that branch, you may want to\n" +"specify branches to push or set the 'push.default' configuration\n" +"variable to 'current' or 'upstream' to push only the current branch." msgstr "" -#: builtin/push.c:135 +#: builtin/push.c:150 +msgid "" +"Updates were rejected because a pushed branch tip is behind its remote\n" +"counterpart. Check out this branch and merge the remote changes\n" +"(e.g. 'git pull') before pushing again.\n" +"See the 'Note about fast-forwards' in 'git push --help' for details." +msgstr "" + +#: builtin/push.c:190 #, c-format -msgid "failed to push some refs to '%s'" +msgid "Pushing to %s\n" msgstr "" -#: builtin/push.c:143 +#: builtin/push.c:194 #, c-format -msgid "" -"To prevent you from losing history, non-fast-forward updates were rejected\n" -"Merge the remote changes (e.g. 'git pull') before pushing again. See the\n" -"'Note about fast-forwards' section of 'git push --help' for details.\n" +msgid "failed to push some refs to '%s'" msgstr "" -#: builtin/push.c:160 +#: builtin/push.c:226 #, c-format msgid "bad repository '%s'" msgstr "" -#: builtin/push.c:161 +#: builtin/push.c:227 msgid "" "No configured push destination.\n" "Either specify the URL from the command-line or configure a remote " @@ -2757,31 +2809,31 @@ msgid "" " git push <name>\n" msgstr "" -#: builtin/push.c:176 +#: builtin/push.c:242 msgid "--all and --tags are incompatible" msgstr "" -#: builtin/push.c:177 +#: builtin/push.c:243 msgid "--all can't be combined with refspecs" msgstr "" -#: builtin/push.c:182 +#: builtin/push.c:248 msgid "--mirror and --tags are incompatible" msgstr "" -#: builtin/push.c:183 +#: builtin/push.c:249 msgid "--mirror can't be combined with refspecs" msgstr "" -#: builtin/push.c:188 +#: builtin/push.c:254 msgid "--all and --mirror are incompatible" msgstr "" -#: builtin/push.c:274 +#: builtin/push.c:342 msgid "--delete is incompatible with --all, --mirror and --tags" msgstr "" -#: builtin/push.c:276 +#: builtin/push.c:344 msgid "--delete doesn't make sense without any refs" msgstr "" @@ -2864,20 +2916,20 @@ msgstr "" msgid "Could not reset index file to revision '%s'." msgstr "" -#: builtin/revert.c:70 builtin/revert.c:91 +#: builtin/revert.c:70 builtin/revert.c:92 #, c-format msgid "%s: %s cannot be used with %s" msgstr "" -#: builtin/revert.c:126 +#: builtin/revert.c:127 msgid "program error" msgstr "" -#: builtin/revert.c:209 +#: builtin/revert.c:213 msgid "revert failed" msgstr "" -#: builtin/revert.c:224 +#: builtin/revert.c:228 msgid "cherry-pick failed" msgstr "" @@ -3040,80 +3092,80 @@ msgstr "" msgid "Updated tag '%s' (was %s)\n" msgstr "" -#: git-am.sh:49 +#: git-am.sh:50 msgid "You need to set your committer info first" msgstr "" -#: git-am.sh:136 +#: git-am.sh:137 msgid "Repository lacks necessary blobs to fall back on 3-way merge." msgstr "" -#: git-am.sh:147 +#: git-am.sh:154 msgid "" "Did you hand edit your patch?\n" "It does not apply to blobs recorded in its index." msgstr "" -#: git-am.sh:156 +#: git-am.sh:163 msgid "Falling back to patching base and 3-way merge..." msgstr "" -#: git-am.sh:268 +#: git-am.sh:275 msgid "Only one StGIT patch series can be applied at once" msgstr "" -#: git-am.sh:355 +#: git-am.sh:362 #, sh-format msgid "Patch format $patch_format is not supported." msgstr "" -#: git-am.sh:357 +#: git-am.sh:364 msgid "Patch format detection failed." msgstr "" -#: git-am.sh:411 +#: git-am.sh:418 msgid "-d option is no longer supported. Do not use." msgstr "" -#: git-am.sh:474 +#: git-am.sh:481 #, sh-format msgid "previous rebase directory $dotest still exists but mbox given." msgstr "" -#: git-am.sh:479 +#: git-am.sh:486 msgid "Please make up your mind. --skip or --abort?" msgstr "" -#: git-am.sh:506 +#: git-am.sh:513 msgid "Resolve operation not in progress, we are not resuming." msgstr "" -#: git-am.sh:572 +#: git-am.sh:579 #, sh-format msgid "Dirty index: cannot apply patches (dirty: $files)" msgstr "" -#: git-am.sh:748 +#: git-am.sh:755 msgid "cannot be interactive without stdin connected to a terminal." msgstr "" #. TRANSLATORS: Make sure to include [y], [n], [e], [v] and [a] #. in your translation. The program will only accept English #. input at this point. -#: git-am.sh:759 +#: git-am.sh:766 msgid "Apply? [y]es/[n]o/[e]dit/[v]iew patch/[a]ccept all " msgstr "" -#: git-am.sh:795 +#: git-am.sh:802 #, sh-format msgid "Applying: $FIRSTLINE" msgstr "" -#: git-am.sh:840 +#: git-am.sh:847 msgid "No changes -- Patch already applied." msgstr "" -#: git-am.sh:866 +#: git-am.sh:873 msgid "applying to an empty history" msgstr "" @@ -3345,161 +3397,161 @@ msgstr "" msgid "cannot strip one component off url '$remoteurl'" msgstr "" -#: git-submodule.sh:108 +#: git-submodule.sh:109 #, sh-format -msgid "No submodule mapping found in .gitmodules for path '$path'" +msgid "No submodule mapping found in .gitmodules for path '$sm_path'" msgstr "" -#: git-submodule.sh:149 +#: git-submodule.sh:150 #, sh-format -msgid "Clone of '$url' into submodule path '$path' failed" +msgid "Clone of '$url' into submodule path '$sm_path' failed" msgstr "" -#: git-submodule.sh:159 +#: git-submodule.sh:160 #, sh-format msgid "Gitdir '$a' is part of the submodule path '$b' or vice versa" msgstr "" -#: git-submodule.sh:247 +#: git-submodule.sh:249 #, sh-format msgid "repo URL: '$repo' must be absolute or begin with ./|../" msgstr "" -#: git-submodule.sh:264 +#: git-submodule.sh:266 #, sh-format -msgid "'$path' already exists in the index" +msgid "'$sm_path' already exists in the index" msgstr "" -#: git-submodule.sh:281 +#: git-submodule.sh:283 #, sh-format -msgid "'$path' already exists and is not a valid git repo" +msgid "'$sm_path' already exists and is not a valid git repo" msgstr "" -#: git-submodule.sh:295 +#: git-submodule.sh:297 #, sh-format -msgid "Unable to checkout submodule '$path'" +msgid "Unable to checkout submodule '$sm_path'" msgstr "" -#: git-submodule.sh:300 +#: git-submodule.sh:302 #, sh-format -msgid "Failed to add submodule '$path'" +msgid "Failed to add submodule '$sm_path'" msgstr "" -#: git-submodule.sh:305 +#: git-submodule.sh:307 #, sh-format -msgid "Failed to register submodule '$path'" +msgid "Failed to register submodule '$sm_path'" msgstr "" -#: git-submodule.sh:347 +#: git-submodule.sh:349 #, sh-format -msgid "Entering '$prefix$path'" +msgid "Entering '$prefix$sm_path'" msgstr "" -#: git-submodule.sh:359 +#: git-submodule.sh:363 #, sh-format -msgid "Stopping at '$path'; script returned non-zero status." +msgid "Stopping at '$sm_path'; script returned non-zero status." msgstr "" -#: git-submodule.sh:401 +#: git-submodule.sh:405 #, sh-format -msgid "No url found for submodule path '$path' in .gitmodules" +msgid "No url found for submodule path '$sm_path' in .gitmodules" msgstr "" -#: git-submodule.sh:410 +#: git-submodule.sh:414 #, sh-format -msgid "Failed to register url for submodule path '$path'" +msgid "Failed to register url for submodule path '$sm_path'" msgstr "" -#: git-submodule.sh:418 +#: git-submodule.sh:422 #, sh-format -msgid "Failed to register update mode for submodule path '$path'" +msgid "Failed to register update mode for submodule path '$sm_path'" msgstr "" -#: git-submodule.sh:420 +#: git-submodule.sh:424 #, sh-format -msgid "Submodule '$name' ($url) registered for path '$path'" +msgid "Submodule '$name' ($url) registered for path '$sm_path'" msgstr "" -#: git-submodule.sh:519 +#: git-submodule.sh:523 #, sh-format msgid "" -"Submodule path '$path' not initialized\n" +"Submodule path '$sm_path' not initialized\n" "Maybe you want to use 'update --init'?" msgstr "" -#: git-submodule.sh:532 +#: git-submodule.sh:536 #, sh-format -msgid "Unable to find current revision in submodule path '$path'" +msgid "Unable to find current revision in submodule path '$sm_path'" msgstr "" -#: git-submodule.sh:551 +#: git-submodule.sh:555 #, sh-format -msgid "Unable to fetch in submodule path '$path'" +msgid "Unable to fetch in submodule path '$sm_path'" msgstr "" -#: git-submodule.sh:565 +#: git-submodule.sh:569 #, sh-format -msgid "Unable to rebase '$sha1' in submodule path '$path'" +msgid "Unable to rebase '$sha1' in submodule path '$sm_path'" msgstr "" -#: git-submodule.sh:566 +#: git-submodule.sh:570 #, sh-format -msgid "Submodule path '$path': rebased into '$sha1'" +msgid "Submodule path '$sm_path': rebased into '$sha1'" msgstr "" -#: git-submodule.sh:571 +#: git-submodule.sh:575 #, sh-format -msgid "Unable to merge '$sha1' in submodule path '$path'" +msgid "Unable to merge '$sha1' in submodule path '$sm_path'" msgstr "" -#: git-submodule.sh:572 +#: git-submodule.sh:576 #, sh-format -msgid "Submodule path '$path': merged in '$sha1'" +msgid "Submodule path '$sm_path': merged in '$sha1'" msgstr "" -#: git-submodule.sh:577 +#: git-submodule.sh:581 #, sh-format -msgid "Unable to checkout '$sha1' in submodule path '$path'" +msgid "Unable to checkout '$sha1' in submodule path '$sm_path'" msgstr "" -#: git-submodule.sh:578 +#: git-submodule.sh:582 #, sh-format -msgid "Submodule path '$path': checked out '$sha1'" +msgid "Submodule path '$sm_path': checked out '$sha1'" msgstr "" -#: git-submodule.sh:600 git-submodule.sh:923 +#: git-submodule.sh:604 git-submodule.sh:927 #, sh-format -msgid "Failed to recurse into submodule path '$path'" +msgid "Failed to recurse into submodule path '$sm_path'" msgstr "" -#: git-submodule.sh:708 +#: git-submodule.sh:712 msgid "--" msgstr "" -#: git-submodule.sh:766 +#: git-submodule.sh:770 #, sh-format msgid " Warn: $name doesn't contain commit $sha1_src" msgstr "" -#: git-submodule.sh:769 +#: git-submodule.sh:773 #, sh-format msgid " Warn: $name doesn't contain commit $sha1_dst" msgstr "" -#: git-submodule.sh:772 +#: git-submodule.sh:776 #, sh-format msgid " Warn: $name doesn't contain commits $sha1_src and $sha1_dst" msgstr "" -#: git-submodule.sh:797 +#: git-submodule.sh:801 msgid "blob" msgstr "" -#: git-submodule.sh:798 +#: git-submodule.sh:802 msgid "submodule" msgstr "" -#: git-submodule.sh:969 +#: git-submodule.sh:973 #, sh-format msgid "Synchronizing submodule url for '$name'" msgstr "" diff --git a/po/pt_PT.po b/po/pt_PT.po index a0e9b0c..d28c568 100644 --- a/po/pt_PT.po +++ b/po/pt_PT.po @@ -9,7 +9,7 @@ msgstr "" "Project-Id-Version: Git\n" "Report-Msgid-Bugs-To: Git Mailing List <git@vger.kernel.org>\n" "POT-Creation-Date: 2012-03-16 20:18+0800\n" -"PO-Revision-Date: 2012-04-01 11:26+0100\n" +"PO-Revision-Date: 2012-04-05 20:48+0100\n" "Last-Translator: Marco Sousa <marcomsousa AT gmail.com>\n" "Language-Team: Portuguese\n" "Language: pt\n" @@ -48,11 +48,11 @@ msgstr "%s %s não é um commit!" #: compat/obstack.c:406 #: compat/obstack.c:408 msgid "memory exhausted" -msgstr "memoria exausta" +msgstr "memória esgotada" #: connected.c:39 msgid "Could not run 'git rev-list'" -msgstr "" +msgstr "Não foi possível executar 'git rev-list'" #: connected.c:48 #, c-format @@ -151,8 +151,8 @@ msgstr "" #, c-format msgid "Your branch is ahead of '%s' by %d commit.\n" msgid_plural "Your branch is ahead of '%s' by %d commits.\n" -msgstr[0] "" -msgstr[1] "" +msgstr[0] "A sua rama está à frente de '%s' pelo commit %d.\n" +msgstr[1] "A sua rama está à frente de '%s' pelos commites %d.\n" #: remote.c:1613 #, c-format @@ -188,7 +188,7 @@ msgstr "" #: builtin/merge.c:1110 #, c-format msgid "Could not write to '%s'" -msgstr "" +msgstr "Não foi possível escrever para '%s'" #: sequencer.c:143 msgid "" @@ -208,7 +208,7 @@ msgstr "" #: sequencer.c:768 #, c-format msgid "Could not write to %s" -msgstr "" +msgstr "Não foi possível gravar para %s" #: sequencer.c:162 #, c-format @@ -235,11 +235,11 @@ msgstr "" #: sequencer.c:298 msgid "Your index file is unmerged." -msgstr "" +msgstr "O seu ficheiro de índice é não fundido." #: sequencer.c:301 msgid "You do not have a valid HEAD" -msgstr "" +msgstr "Você não tem uma HEAD válida" #: sequencer.c:316 #, c-format @@ -266,7 +266,7 @@ msgstr "" #: sequencer.c:343 #, c-format msgid "Cannot get commit message for %s" -msgstr "" +msgstr "Não é possível obter mensagem commit para %s" #: sequencer.c:427 #, c-format @@ -291,7 +291,7 @@ msgstr "" #: sequencer.c:453 msgid "empty commit set passed" -msgstr "" +msgstr "passado commit com o set vazio" #: sequencer.c:461 #, c-format @@ -306,12 +306,12 @@ msgstr "" #: sequencer.c:551 #, c-format msgid "Cannot %s during a %s" -msgstr "" +msgstr "Não foi possível abrir %s durante um %s" #: sequencer.c:573 #, c-format msgid "Could not parse line %d." -msgstr "" +msgstr "Não foi possível parsear linha %d." #: sequencer.c:578 msgid "No commits parsed." @@ -320,12 +320,12 @@ msgstr "Nenhum commit parseado." #: sequencer.c:591 #, c-format msgid "Could not open %s" -msgstr "" +msgstr "Não foi possível abrir %s" #: sequencer.c:595 #, c-format msgid "Could not read %s." -msgstr "" +msgstr "Não foi possível ler %s." #: sequencer.c:602 #, c-format @@ -382,12 +382,12 @@ msgstr "" #: sequencer.c:732 #, c-format msgid "cannot open %s: %s" -msgstr "" +msgstr "não foi possível abrir %s: %s" #: sequencer.c:735 #, c-format msgid "cannot read %s: %s" -msgstr "" +msgstr "não foi possível ler %s: %s" #: sequencer.c:736 msgid "unexpected end of file" @@ -401,7 +401,7 @@ msgstr "" #: sequencer.c:765 #, c-format msgid "Could not format %s." -msgstr "" +msgstr "Não foi possível formatear %s." #: sequencer.c:927 msgid "Can't revert as initial commit" @@ -413,7 +413,7 @@ msgstr "" #: wt-status.c:134 msgid "Unmerged paths:" -msgstr "" +msgstr "caminhos não fundidos:" #: wt-status.c:140 #: wt-status.c:157 @@ -470,31 +470,31 @@ msgstr "erro" #: wt-status.c:212 msgid "both deleted:" -msgstr "" +msgstr "eliminados em ambos:" #: wt-status.c:213 msgid "added by us:" -msgstr "" +msgstr "adicionado por nós:" #: wt-status.c:214 msgid "deleted by them:" -msgstr "" +msgstr "eliminados por eles:" #: wt-status.c:215 msgid "added by them:" -msgstr "" +msgstr "adicionados por eles:" #: wt-status.c:216 msgid "deleted by us:" -msgstr "" +msgstr "eliminados por nós:" #: wt-status.c:217 msgid "both added:" -msgstr "" +msgstr "adicionados em ambos:" #: wt-status.c:218 msgid "both modified:" -msgstr "" +msgstr "modificados em ambos:" #: wt-status.c:248 msgid "new commits, " @@ -502,11 +502,11 @@ msgstr "novos commits, " #: wt-status.c:250 msgid "modified content, " -msgstr "" +msgstr "conteúdo modificado, " #: wt-status.c:252 msgid "untracked content, " -msgstr "" +msgstr "conteúdo não seguido" #: wt-status.c:266 #, c-format @@ -546,7 +546,7 @@ msgstr "desconhecido: %s" #: wt-status.c:287 #, c-format msgid "unmerged: %s" -msgstr "" +msgstr "não fundidos: %s" #: wt-status.c:290 #, c-format @@ -559,7 +559,7 @@ msgstr "Na rama" #: wt-status.c:720 msgid "Not currently on any branch." -msgstr "" +msgstr "Não está em nenhuma rama." #: wt-status.c:731 msgid "Initial commit" @@ -567,7 +567,7 @@ msgstr "Commit inicial" #: wt-status.c:745 msgid "Untracked" -msgstr "" +msgstr "Não seguido" #: wt-status.c:747 msgid "Ignored" @@ -589,7 +589,7 @@ msgstr "Sem mudanças" #: wt-status.c:761 #, c-format msgid "no changes added to commit%s\n" -msgstr "" +msgstr "nenhuma alteração adicionado ao commit%s\n" #: wt-status.c:763 msgid " (use \"git add\" and/or \"git commit -a\")" @@ -652,7 +652,7 @@ msgstr "" #: builtin/add.c:67 #: builtin/commit.c:298 msgid "updating files failed" -msgstr "" +msgstr "Falou a atualização dos ficheiros" #: builtin/add.c:77 #, c-format @@ -682,16 +682,16 @@ msgstr "" #: builtin/add.c:276 msgid "Could not read the index" -msgstr "" +msgstr "Não foi possível ler o indíce" #: builtin/add.c:286 #, c-format msgid "Could not open '%s' for writing." -msgstr "" +msgstr "Não foi possível abrir '%s' para escrever." #: builtin/add.c:290 msgid "Could not write patch" -msgstr "" +msgstr "Não consegue escrever patch" #: builtin/add.c:295 #, c-format @@ -700,12 +700,12 @@ msgstr "" #: builtin/add.c:297 msgid "Empty patch. Aborted." -msgstr "" +msgstr "Patch vazio. Aborted." #: builtin/add.c:303 #, c-format msgid "Could not apply '%s'" -msgstr "" +msgstr "Não foi possível aplicar o '%s'" #: builtin/add.c:312 msgid "The following paths are ignored by one of your .gitignore files:\n" @@ -722,7 +722,7 @@ msgstr "nenhum ficheiros adicionado" #: builtin/add.c:359 msgid "adding files failed" -msgstr "" +msgstr "falhou a adicionar ficheiros" #: builtin/add.c:391 msgid "-A and -u are mutually incompatible" @@ -748,7 +748,7 @@ msgstr "" #: builtin/mv.c:82 #: builtin/rm.c:162 msgid "index file corrupt" -msgstr "" +msgstr "ficheiro index corrupto" #: builtin/add.c:476 #: builtin/mv.c:229 @@ -781,7 +781,7 @@ msgstr "" #: builtin/archive.c:65 #, c-format msgid "remote error: %s" -msgstr "" +msgstr "erro remoto: %s" #: builtin/archive.c:66 msgid "git archive: protocol error" @@ -812,7 +812,7 @@ msgstr "remota" #: builtin/branch.c:171 msgid "cannot use -a with -d" -msgstr "" +msgstr "Não é possível usar -a com um -d" #: builtin/branch.c:177 msgid "Couldn't look up commit object for HEAD" @@ -826,7 +826,7 @@ msgstr "" #: builtin/branch.c:192 #, c-format msgid "%sbranch '%s' not found." -msgstr "" +msgstr "%sbranch '%s' não encontrado." #: builtin/branch.c:200 #, c-format @@ -862,17 +862,17 @@ msgstr "" #: builtin/branch.c:394 #, c-format msgid "behind %d] " -msgstr "" +msgstr "atrás %d] " #: builtin/branch.c:396 #, c-format msgid "ahead %d] " -msgstr "" +msgstr "a frente %d] " #: builtin/branch.c:398 #, c-format msgid "ahead %d, behind %d] " -msgstr "" +msgstr "a frente %d, atrás %d] " #: builtin/branch.c:501 msgid "(no branch)" @@ -889,16 +889,16 @@ msgstr "" #: builtin/branch.c:589 #, c-format msgid "Invalid branch name: '%s'" -msgstr "" +msgstr "Nome da rama inválida: '%s'" #: builtin/branch.c:604 msgid "Branch rename failed" -msgstr "" +msgstr "Falhou renomeação da rama" #: builtin/branch.c:608 #, c-format msgid "Renamed a misnamed branch '%s' away" -msgstr "" +msgstr "Renomeado uma rama erronea '%s'" #: builtin/branch.c:612 #, c-format @@ -986,7 +986,7 @@ msgstr "" #: builtin/checkout.c:234 #: builtin/checkout.c:392 msgid "corrupt index file" -msgstr "" +msgstr "ficheiro index corrupto" #: builtin/checkout.c:264 #: builtin/checkout.c:271 @@ -1038,17 +1038,17 @@ msgstr "" #: builtin/checkout.c:581 #, c-format msgid "Switched to a new branch '%s'\n" -msgstr "" +msgstr "Mudado para a nova rama '%s'\n" #: builtin/checkout.c:583 #, c-format msgid "Switched to branch '%s'\n" -msgstr "" +msgstr "Mudado para a rama '%s'\n" #: builtin/checkout.c:639 #, c-format msgid " ... and %d more.\n" -msgstr "" +msgstr " ... e %d mais.\n" #. The singular version #: builtin/checkout.c:645 @@ -1191,7 +1191,7 @@ msgstr "" #: builtin/clean.c:179 #, c-format msgid "Removing %s\n" -msgstr "" +msgstr "Eliminando %s\n" #: builtin/clean.c:162 #: builtin/clean.c:182 @@ -1271,7 +1271,7 @@ msgstr "" #: builtin/clone.c:639 msgid "Too many arguments." -msgstr "" +msgstr "Demasiados parametros." #: builtin/clone.c:643 msgid "You must specify a repository to clone." @@ -1315,17 +1315,17 @@ msgstr "" #: builtin/clone.c:728 #, c-format msgid "Cloning into bare repository '%s'...\n" -msgstr "" +msgstr "Clonando em um repositorio nu (bare) '%s'...\n" #: builtin/clone.c:730 #, c-format msgid "Cloning into '%s'...\n" -msgstr "" +msgstr "Clonar em '%s'...\n" #: builtin/clone.c:786 #, c-format msgid "Don't know how to clone %s" -msgstr "" +msgstr "Não sei como clonar %s" #: builtin/clone.c:835 #, c-format @@ -1349,6 +1349,16 @@ msgid "" "\n" " git commit --amend --reset-author\n" msgstr "" +"O seu nome e endereço de e-mail foram configurados automaticamente com base\n" +"no o seu usuario e nome da maquina. Por favor, verifique se eles são precisos.\n" +"Você pode suprimir esta mensagem, configurando-los explicitamente:\n" +"\n" +" git config --global user.name \"O teu Nome\"\n" +" git config --global user.email tu@examplo.com\n" +"\n" +"Após fazer isso, você pode corregir a identidade usada em este commit com:\n" +"\n" +" git commit --amend --reset-author\n" #: builtin/commit.c:54 msgid "" @@ -1386,7 +1396,7 @@ msgstr "" #: builtin/commit.c:373 msgid "interactive add failed" -msgstr "" +msgstr "falhou adicionar interativo" #: builtin/commit.c:406 #: builtin/commit.c:427 @@ -1401,7 +1411,7 @@ msgstr "" #: builtin/commit.c:466 msgid "cannot read the index" -msgstr "" +msgstr "não foi possível ler o indíce" #: builtin/commit.c:486 msgid "unable to write temporary index file" @@ -1442,29 +1452,29 @@ msgstr "" #: builtin/commit.c:688 #, c-format msgid "could not read log file '%s'" -msgstr "" +msgstr "não é possivel ler o ficheiro de log '%s'" #: builtin/commit.c:694 msgid "commit has empty message" -msgstr "" +msgstr "a mensagem do commit está vazia" #: builtin/commit.c:710 msgid "could not read MERGE_MSG" -msgstr "" +msgstr "não é possivel ler MERGE_MSG" #: builtin/commit.c:714 msgid "could not read SQUASH_MSG" -msgstr "" +msgstr "não é possivel ler SQUASH_MSG" #: builtin/commit.c:718 #, c-format msgid "could not read '%s'" -msgstr "" +msgstr "não é possivel ler '%s'" #: builtin/commit.c:746 #, c-format msgid "could not open '%s'" -msgstr "" +msgstr "não é possivel abrir '%s'" #: builtin/commit.c:770 msgid "could not write commit template" @@ -1482,7 +1492,7 @@ msgstr "" #: builtin/commit.c:796 msgid "Please enter the commit message for your changes." -msgstr "" +msgstr "Por favor insira a mensagem de commit das suas alterações." #: builtin/commit.c:799 msgid "" @@ -1538,7 +1548,7 @@ msgstr "" #: builtin/commit.c:1041 msgid "You have nothing to amend." -msgstr "" +msgstr "Você não tem nada a corregir." #: builtin/commit.c:1043 #, c-format @@ -1725,7 +1735,7 @@ msgstr "" #: builtin/describe.c:462 msgid "No names found, cannot describe anything." -msgstr "" +msgstr "Nenhum nome encontrado, não descreve nada." #: builtin/describe.c:482 msgid "--dirty is incompatible with committishes" @@ -1882,7 +1892,7 @@ msgstr "" #: builtin/fetch.c:879 #, c-format msgid "Fetching %s\n" -msgstr "" +msgstr "Baixando %s\n" #: builtin/fetch.c:881 #, c-format @@ -1894,10 +1904,12 @@ msgid "" "No remote repository specified. Please, specify either a URL or a\n" "remote name from which new revisions should be fetched." msgstr "" +"Nenhum repositório remoto especificado. Por favor, especifique um URL ou o\n" +"nome remoto a partir do qual novas revisões devem ser obtida." #: builtin/fetch.c:918 msgid "You need to specify a tag name." -msgstr "" +msgstr "Você precisa especificar um nome da etiqueta." #: builtin/fetch.c:970 msgid "fetch --all does not take a repository argument" @@ -1919,11 +1931,11 @@ msgstr "" #: builtin/gc.c:63 #, c-format msgid "Invalid %s: '%s'" -msgstr "" +msgstr "Inválido %s: '%s'" #: builtin/gc.c:78 msgid "Too many options specified" -msgstr "" +msgstr "Demasiadas opções especificadas" #: builtin/gc.c:103 #, c-format @@ -2162,7 +2174,7 @@ msgstr "" #: builtin/log.c:507 #, c-format msgid "Unknown type: %d" -msgstr "" +msgstr "Tipo desconhecido: %d" #: builtin/log.c:596 msgid "format.headers without value" @@ -2170,28 +2182,28 @@ msgstr "" #: builtin/log.c:669 msgid "name of output directory is too long" -msgstr "" +msgstr "nome do diretório de saída é demasiado longo" #: builtin/log.c:680 #, c-format msgid "Cannot open patch file %s" -msgstr "" +msgstr "Não é possivel abrir o ficheiro patch %s" #: builtin/log.c:694 msgid "Need exactly one range." -msgstr "" +msgstr "Necessita de exatamente um intervalo." #: builtin/log.c:702 msgid "Not a range." -msgstr "" +msgstr "Não é um intervalo." #: builtin/log.c:739 msgid "Could not extract email from committer identity." -msgstr "" +msgstr "Não foi possível extrair a identidade do committer do e-mail." #: builtin/log.c:785 msgid "Cover letter needs email format" -msgstr "" +msgstr "Carta de apresentação necessita um modelo de e-mail" #: builtin/log.c:879 #, c-format @@ -2200,7 +2212,7 @@ msgstr "" #: builtin/log.c:952 msgid "Two output directories?" -msgstr "" +msgstr "Dois diretórios de saída?" #: builtin/log.c:1173 #, c-format @@ -2219,7 +2231,7 @@ msgstr "" #: builtin/shortlog.c:284 #, c-format msgid "unrecognized argument: %s" -msgstr "" +msgstr "argumento não reconhecido: %s" #: builtin/log.c:1228 msgid "--name-only does not make sense" @@ -2235,7 +2247,7 @@ msgstr "" #: builtin/log.c:1255 msgid "standard output, or directory, which one?" -msgstr "" +msgstr "saída padrão, ou diretório, qual deles?" #: builtin/log.c:1257 #, c-format @@ -2244,7 +2256,7 @@ msgstr "" #: builtin/log.c:1410 msgid "Failed to create output files" -msgstr "" +msgstr "Falhou ao criar ficheiros de saída" #: builtin/log.c:1514 #, c-format @@ -2270,12 +2282,12 @@ msgstr "" #: builtin/merge.c:129 #, c-format msgid "Available strategies are:" -msgstr "" +msgstr "As estratégias disponíveis são:" #: builtin/merge.c:134 #, c-format msgid "Available custom strategies are:" -msgstr "" +msgstr "Estratégias personalizadas disponíveis são:" #: builtin/merge.c:241 msgid "could not run stash." @@ -2361,7 +2373,7 @@ msgstr "" #: builtin/merge.c:885 #, c-format msgid "Not committing merge; use 'git commit' to complete the merge.\n" -msgstr "" +msgstr "Não commitando um merge; usa 'git commit' para completar o merge.\n" #: builtin/merge.c:891 msgid "" @@ -2374,7 +2386,7 @@ msgstr "" #: builtin/merge.c:915 msgid "Empty commit message." -msgstr "" +msgstr "Mensagem de commit vazia." #: builtin/merge.c:927 #, c-format @@ -2502,7 +2514,7 @@ msgstr "" #: builtin/merge.c:1555 #, c-format msgid "Merge with strategy %s failed.\n" -msgstr "" +msgstr "Fundir com a estratégia %s falhou.\n" #: builtin/merge.c:1564 #, c-format @@ -2538,15 +2550,15 @@ msgstr "" #: builtin/mv.c:140 msgid "source directory is empty" -msgstr "" +msgstr "o directorio fonte está vazio" #: builtin/mv.c:171 msgid "not under version control" -msgstr "" +msgstr "não está no controlo de versões" #: builtin/mv.c:173 msgid "destination exists" -msgstr "" +msgstr "existe destino" #: builtin/mv.c:181 #, c-format @@ -2559,7 +2571,7 @@ msgstr "Não consegue subscrever" #: builtin/mv.c:187 msgid "multiple sources for the same target" -msgstr "" +msgstr "múltiplas fontes para o mesmo alvo" #: builtin/mv.c:202 #, c-format @@ -2569,12 +2581,12 @@ msgstr "" #: builtin/mv.c:212 #, c-format msgid "Renaming %s to %s\n" -msgstr "" +msgstr "Mudar de nome %s para %s\n" #: builtin/mv.c:215 #, c-format msgid "renaming '%s' failed" -msgstr "" +msgstr "mudar de nome '%s' falhou" #: builtin/notes.c:139 #, c-format @@ -2672,7 +2684,7 @@ msgstr "" #: builtin/notes.c:377 #, c-format msgid "Bad %s value: '%s'" -msgstr "" +msgstr "Inválido %s valor: '%s'" #: builtin/notes.c:441 #, c-format @@ -2692,13 +2704,13 @@ msgstr "" #: builtin/notes.c:759 #: builtin/notes.c:1033 msgid "too many parameters" -msgstr "" +msgstr "demasiado parametros" #: builtin/notes.c:513 #: builtin/notes.c:772 #, c-format msgid "No note found for object %s." -msgstr "" +msgstr "Nenhuma nota encontrada para o objecto %s." #: builtin/notes.c:580 #, c-format @@ -2755,7 +2767,7 @@ msgstr "" #: builtin/pack-objects.c:2322 #, c-format msgid "option %s does not accept negative form" -msgstr "" +msgstr "opção %s não aceita formato negativo" #: builtin/pack-objects.c:2326 #, c-format @@ -2768,7 +2780,7 @@ msgstr "" #: builtin/push.c:63 msgid "--delete only accepts plain target ref names" -msgstr "" +msgstr "--delete só aceita nomes simples para o ref de destino" #: builtin/push.c:73 #, c-format @@ -2835,7 +2847,7 @@ msgstr "" #: builtin/push.c:176 msgid "--all and --tags are incompatible" -msgstr "" +msgstr "--all e --tags are são incompatíveis" #: builtin/push.c:177 msgid "--all can't be combined with refspecs" @@ -2879,7 +2891,7 @@ msgstr "manter" #: builtin/reset.c:77 msgid "You do not have a valid HEAD." -msgstr "" +msgstr "Não tens a HEAD válida." #: builtin/reset.c:79 msgid "Failed to find tree of HEAD." @@ -2915,7 +2927,7 @@ msgstr "" #: builtin/reset.c:297 #, c-format msgid "Could not parse object '%s'." -msgstr "" +msgstr "Não foi possível analisar objeto '%s'." #: builtin/reset.c:302 msgid "--patch is incompatible with --{hard,mixed,soft}" @@ -3055,7 +3067,7 @@ msgstr "" #: builtin/tag.c:366 msgid "no tag message?" -msgstr "" +msgstr "nenhuma mensaje para a etiqueta?" #: builtin/tag.c:372 #, c-format @@ -3099,7 +3111,7 @@ msgstr "" #: builtin/tag.c:545 #, c-format msgid "tag '%s' already exists" -msgstr "" +msgstr "etiqueta '%s' já existe" #: builtin/tag.c:563 #, c-format @@ -3118,7 +3130,7 @@ msgstr "" #: git-am.sh:49 msgid "You need to set your committer info first" -msgstr "" +msgstr "Necessitas primeiro de especificiar os teus dados de committer" #: git-am.sh:136 msgid "Repository lacks necessary blobs to fall back on 3-way merge." @@ -3145,7 +3157,7 @@ msgstr "" #: git-am.sh:357 msgid "Patch format detection failed." -msgstr "" +msgstr "Falhou a detecção do formato do patch." #: git-am.sh:411 msgid "-d option is no longer supported. Do not use." @@ -3187,7 +3199,7 @@ msgstr "Aplicando: $FIRSTLINE" #: git-am.sh:840 msgid "No changes -- Patch already applied." -msgstr "" +msgstr "Nenhuma mudança -- Já foi aplicado o patch." #: git-am.sh:866 msgid "applying to an empty history" @@ -3307,7 +3319,7 @@ msgstr "" #: git-pull.sh:257 msgid "Cannot rebase onto multiple branches" -msgstr "" +msgstr "Não é possível fazer rebase com várias ramas" #: git-stash.sh:51 msgid "git stash clear with parameters is unimplemented" @@ -3328,7 +3340,7 @@ msgstr "" #: git-stash.sh:140 msgid "No changes selected" -msgstr "" +msgstr "Não há alterações seleccionadas" #: git-stash.sh:143 msgid "Cannot remove temporary index (can't happen)" @@ -3340,11 +3352,11 @@ msgstr "" #: git-stash.sh:223 msgid "No local changes to save" -msgstr "" +msgstr "Sem alterações locais para guardar" #: git-stash.sh:227 msgid "Cannot initialize stash" -msgstr "" +msgstr "Não é possível inicializar o stash" #: git-stash.sh:235 msgid "Cannot save the current status" @@ -3401,7 +3413,7 @@ msgstr "" #: git-stash.sh:491 #, sh-format msgid "Dropped ${REV} ($s)" -msgstr "" +msgstr "Deixado cair ${REV} ($s)" #: git-stash.sh:492 #, sh-format @@ -3410,7 +3422,7 @@ msgstr "" #: git-stash.sh:499 msgid "No branch name specified" -msgstr "" +msgstr "Nenhum nome para a rama especificado" #: git-stash.sh:570 msgid "(To restore them type \"git stash apply\")" @@ -3469,7 +3481,7 @@ msgstr "" #: git-submodule.sh:347 #, sh-format msgid "Entering '$prefix$path'" -msgstr "" +msgstr "Entrando '$prefix$path'" #: git-submodule.sh:359 #, sh-format diff --git a/po/zh_CN.po b/po/zh_CN.po index 6474739..701b693 100644 --- a/po/zh_CN.po +++ b/po/zh_CN.po @@ -12,7 +12,7 @@ msgid "" msgstr "" "Project-Id-Version: Git\n" "Report-Msgid-Bugs-To: Git Mailing List <git@vger.kernel.org>\n" -"POT-Creation-Date: 2012-03-16 20:18+0800\n" +"POT-Creation-Date: 2012-04-28 20:17+0800\n" "PO-Revision-Date: 2012-01-30 00:00+0800\n" "Last-Translator: Jiang Xin <worldhello.net@gmail.com>\n" "Language-Team: GitHub <https://github.com/gotgit/git/>\n" @@ -22,7 +22,7 @@ msgstr "" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" -#: advice.c:34 +#: advice.c:40 #, c-format msgid "hint: %.*s\n" msgstr "提示：%.*s\n" @@ -31,7 +31,7 @@ msgstr "提示：%.*s\n" #. * Message used both when 'git commit' fails and when #. * other commands doing a merge do. #. -#: advice.c:64 +#: advice.c:70 msgid "" "Fix them up in the work tree,\n" "and then use 'git add/rm <file>' as\n" @@ -42,12 +42,12 @@ msgstr "" "'git add/rm <file>' 标记解决方案，\n" "或使用 'git commit -a'。" -#: commit.c:47 +#: commit.c:48 #, c-format msgid "could not parse %s" msgstr "不能解析 %s" -#: commit.c:49 +#: commit.c:50 #, c-format msgid "%s %s is not a commit!" msgstr "%s %s 不是一个提交!" @@ -91,29 +91,29 @@ msgstr "" "发现配置变量 'diff.dirstat' 中的错误：\n" "%s" -#: diff.c:1336 +#: diff.c:1400 msgid " 0 files changed\n" msgstr " 0 个文件被修改\n" -#: diff.c:1340 +#: diff.c:1404 #, c-format msgid " %d file changed" msgid_plural " %d files changed" msgstr[0] " %d 个文件被修改" -#: diff.c:1357 +#: diff.c:1421 #, c-format msgid ", %d insertion(+)" msgid_plural ", %d insertions(+)" msgstr[0] "，插入 %d 行(+)" -#: diff.c:1368 +#: diff.c:1432 #, c-format msgid ", %d deletion(-)" msgid_plural ", %d deletions(-)" msgstr[0] "，删除 %d 行(-)" -#: diff.c:3424 +#: diff.c:3435 #, c-format msgid "" "Failed to parse --dirstat/-X option parameter:\n" @@ -183,14 +183,14 @@ msgstr[0] "" "您的分支和 '%s' 出现了偏离，\n" "并且各自分别有 %d 和 %d 处不同的提交。\n" -#: sequencer.c:120 builtin/merge.c:864 builtin/merge.c:985 -#: builtin/merge.c:1095 builtin/merge.c:1105 +#: sequencer.c:120 builtin/merge.c:865 builtin/merge.c:978 +#: builtin/merge.c:1088 builtin/merge.c:1098 #, c-format msgid "Could not open '%s' for writing" msgstr "不能为写入打开 '%s'" -#: sequencer.c:122 builtin/merge.c:334 builtin/merge.c:867 -#: builtin/merge.c:1097 builtin/merge.c:1110 +#: sequencer.c:122 builtin/merge.c:333 builtin/merge.c:868 +#: builtin/merge.c:1090 builtin/merge.c:1103 #, c-format msgid "Could not write to '%s'" msgstr "不能写入 '%s'" @@ -285,8 +285,8 @@ msgstr "不能还原 %s... %s" msgid "could not apply %s... %s" msgstr "不能应用 %s... %s" -#: sequencer.c:450 sequencer.c:909 builtin/log.c:288 builtin/log.c:713 -#: builtin/log.c:1329 builtin/log.c:1548 builtin/merge.c:348 +#: sequencer.c:450 sequencer.c:909 builtin/log.c:289 builtin/log.c:719 +#: builtin/log.c:1335 builtin/log.c:1554 builtin/merge.c:347 #: builtin/shortlog.c:181 msgid "revision walk setup failed" msgstr "版本遍历设置失败" @@ -411,6 +411,25 @@ msgstr "不能作为初始提交还原" msgid "Can't cherry-pick into empty head" msgstr "不能拣选到空分支" +#: sha1_name.c:864 +msgid "HEAD does not point to a branch" +msgstr "HEAD 没有指向一个分支" + +#: sha1_name.c:867 +#, c-format +msgid "No such branch: '%s'" +msgstr "没有此分支：'%s'" + +#: sha1_name.c:869 +#, c-format +msgid "No upstream configured for branch '%s'" +msgstr "尚未给分支 '%s' 设置上游" + +#: sha1_name.c:872 +#, c-format +msgid "Upstream branch '%s' not stored as a remote-tracking branch" +msgstr "上游分支 '%s' 没有存储为一个远程跟踪分支" + #: wt-status.c:134 msgid "Unmerged paths:" msgstr "未合并的路径：" @@ -830,34 +849,34 @@ msgstr "" # 译者：汉字之间无空格，故删除尾部空格 #. TRANSLATORS: This is "remote " in "remote branch '%s' not found" -#: builtin/branch.c:163 +#: builtin/branch.c:164 msgid "remote " msgstr "远程" -#: builtin/branch.c:171 +#: builtin/branch.c:172 msgid "cannot use -a with -d" msgstr "不能将 -a 和 -d 共用" -#: builtin/branch.c:177 +#: builtin/branch.c:178 msgid "Couldn't look up commit object for HEAD" msgstr "无法查询 HEAD 指向的提交对象" -#: builtin/branch.c:182 +#: builtin/branch.c:183 #, c-format msgid "Cannot delete the branch '%s' which you are currently on." msgstr "无法删除您当前所在的分支 '%s'。" -#: builtin/branch.c:192 +#: builtin/branch.c:193 #, c-format msgid "%sbranch '%s' not found." msgstr "%s分支 '%s' 未发现。" -#: builtin/branch.c:200 +#: builtin/branch.c:201 #, c-format msgid "Couldn't look up commit object for '%s'" msgstr "无法查询 '%s' 指向的提交对象" -#: builtin/branch.c:206 +#: builtin/branch.c:207 #, c-format msgid "" "The branch '%s' is not fully merged.\n" @@ -866,97 +885,97 @@ msgstr "" "分支 '%s' 没有完全合并。\n" "如果您确认要删除它，执行 'git branch -D %s'。" -#: builtin/branch.c:214 +#: builtin/branch.c:215 #, c-format msgid "Error deleting %sbranch '%s'" msgstr "删除 %s分支 '%s' 时出错" -#: builtin/branch.c:219 +#: builtin/branch.c:221 #, c-format msgid "Deleted %sbranch %s (was %s).\n" msgstr "已删除 %s分支 %s（曾为 %s）。\n" -#: builtin/branch.c:224 +#: builtin/branch.c:226 msgid "Update of config-file failed" msgstr "无法更新 config 文件" -#: builtin/branch.c:322 +#: builtin/branch.c:324 #, c-format msgid "branch '%s' does not point at a commit" msgstr "分支 '%s' 未指向一个提交" # 译者：注意保持句尾空格 -#: builtin/branch.c:394 +#: builtin/branch.c:396 #, c-format msgid "behind %d] " msgstr "落后 %d] " # 译者：注意保持句尾空格 -#: builtin/branch.c:396 +#: builtin/branch.c:398 #, c-format msgid "ahead %d] " msgstr "领先 %d] " # 译者：注意保持句尾空格 -#: builtin/branch.c:398 +#: builtin/branch.c:400 #, c-format msgid "ahead %d, behind %d] " msgstr "领先 %d，落后 %d] " -#: builtin/branch.c:501 +#: builtin/branch.c:503 msgid "(no branch)" msgstr "（非分支）" -#: builtin/branch.c:566 +#: builtin/branch.c:568 msgid "some refs could not be read" msgstr "一些引用不能读取" -#: builtin/branch.c:579 +#: builtin/branch.c:581 msgid "cannot rename the current branch while not on any." msgstr "无法重命名当前分支因为不处于任何分支上。" -#: builtin/branch.c:589 +#: builtin/branch.c:591 #, c-format msgid "Invalid branch name: '%s'" msgstr "无效的分支名：'%s'" -#: builtin/branch.c:604 +#: builtin/branch.c:606 msgid "Branch rename failed" msgstr "分支重命名失败" -#: builtin/branch.c:608 +#: builtin/branch.c:610 #, c-format msgid "Renamed a misnamed branch '%s' away" msgstr "重命名掉一个错误命名的旧分支 '%s'" -#: builtin/branch.c:612 +#: builtin/branch.c:614 #, c-format msgid "Branch renamed to %s, but HEAD is not updated!" msgstr "分支重命名为 %s，但 HEAD 没有更新！" -#: builtin/branch.c:619 +#: builtin/branch.c:621 msgid "Branch is renamed, but update of config-file failed" msgstr "分支被重命名，但更新 config 文件失败" -#: builtin/branch.c:634 +#: builtin/branch.c:636 #, c-format msgid "malformed object name %s" msgstr "非法的对象名 %s" -#: builtin/branch.c:658 +#: builtin/branch.c:660 #, c-format msgid "could not write branch description template: %s\n" msgstr "不能写分支描述模版：%s\n" -#: builtin/branch.c:746 +#: builtin/branch.c:750 msgid "Failed to resolve HEAD as a valid ref." msgstr "无法将 HEAD 解析为有效引用。" -#: builtin/branch.c:751 builtin/clone.c:558 +#: builtin/branch.c:755 builtin/clone.c:558 msgid "HEAD not found below refs/heads!" msgstr "HEAD 没有位于 /refs/heads 之下！" -#: builtin/branch.c:809 +#: builtin/branch.c:813 msgid "-a and -r options to 'git branch' do not make sense with a branch name" msgstr "'git branch' 的 -a 和 -r 选项带一个分支名参数没有意义" @@ -1018,7 +1037,7 @@ msgid "path '%s' is unmerged" msgstr "路径 '%s' 未合并" #: builtin/checkout.c:302 builtin/checkout.c:498 builtin/clone.c:583 -#: builtin/merge.c:811 +#: builtin/merge.c:812 msgid "unable to write new index file" msgstr "无法写新的索引文件" @@ -1035,43 +1054,43 @@ msgstr "您需要先解决当前索引的冲突" msgid "Can not do reflog for '%s'\n" msgstr "不能对 '%s' 执行 reflog 操作\n" -#: builtin/checkout.c:565 +#: builtin/checkout.c:566 msgid "HEAD is now at" msgstr "HEAD 目前位于" -#: builtin/checkout.c:572 +#: builtin/checkout.c:573 #, c-format msgid "Reset branch '%s'\n" msgstr "重置分支 '%s'\n" -#: builtin/checkout.c:575 +#: builtin/checkout.c:576 #, c-format msgid "Already on '%s'\n" msgstr "已经位于 '%s'\n" -#: builtin/checkout.c:579 +#: builtin/checkout.c:580 #, c-format msgid "Switched to and reset branch '%s'\n" msgstr "切换并重置分支 '%s'\n" -#: builtin/checkout.c:581 +#: builtin/checkout.c:582 #, c-format msgid "Switched to a new branch '%s'\n" msgstr "切换到一个新分支 '%s'\n" -#: builtin/checkout.c:583 +#: builtin/checkout.c:584 #, c-format msgid "Switched to branch '%s'\n" msgstr "切换到分支 '%s'\n" # 译者：注意保持前导空格 -#: builtin/checkout.c:639 +#: builtin/checkout.c:640 #, c-format msgid " ... and %d more.\n" msgstr " ... 及其它 %d 个。\n" #. The singular version -#: builtin/checkout.c:645 +#: builtin/checkout.c:646 #, c-format msgid "" "Warning: you are leaving %d commit behind, not connected to\n" @@ -1088,7 +1107,7 @@ msgstr[0] "" "\n" "%s\n" -#: builtin/checkout.c:663 +#: builtin/checkout.c:664 #, c-format msgid "" "If you want to keep them by creating a new branch, this may be a good time\n" @@ -1103,71 +1122,71 @@ msgstr "" " git branch new_branch_name %s\n" "\n" -#: builtin/checkout.c:692 +#: builtin/checkout.c:693 msgid "internal error in revision walk" msgstr "在版本遍历时遇到内部错误" -#: builtin/checkout.c:696 +#: builtin/checkout.c:697 msgid "Previous HEAD position was" msgstr "之前的 HEAD 位置是" -#: builtin/checkout.c:722 +#: builtin/checkout.c:723 msgid "You are on a branch yet to be born" msgstr "您位于一个尚未初始化的分支" #. case (1) -#: builtin/checkout.c:853 +#: builtin/checkout.c:854 #, c-format msgid "invalid reference: %s" msgstr "无效引用：%s" #. case (1): want a tree -#: builtin/checkout.c:892 +#: builtin/checkout.c:893 #, c-format msgid "reference is not a tree: %s" msgstr "引用不是一个树：%s" -#: builtin/checkout.c:972 +#: builtin/checkout.c:973 msgid "-B cannot be used with -b" msgstr "-B 不能和 -b 共用" -#: builtin/checkout.c:981 +#: builtin/checkout.c:982 msgid "--patch is incompatible with all other options" msgstr "--patch 选项和其他选项不兼容" -#: builtin/checkout.c:984 +#: builtin/checkout.c:985 msgid "--detach cannot be used with -b/-B/--orphan" msgstr "--detach 不能和 -b/-B/--orphan 共用" -#: builtin/checkout.c:986 +#: builtin/checkout.c:987 msgid "--detach cannot be used with -t" msgstr "--detach 不能和 -t 共用" -#: builtin/checkout.c:992 +#: builtin/checkout.c:993 msgid "--track needs a branch name" msgstr "--track 需要一个分支名" -#: builtin/checkout.c:999 +#: builtin/checkout.c:1000 msgid "Missing branch name; try -b" msgstr "缺少分支名；尝试 -b" -#: builtin/checkout.c:1005 +#: builtin/checkout.c:1006 msgid "--orphan and -b|-B are mutually exclusive" msgstr "--orphan 和 -b|-B 互斥" -#: builtin/checkout.c:1007 +#: builtin/checkout.c:1008 msgid "--orphan cannot be used with -t" msgstr "--orphan 不能和 -t 共用" -#: builtin/checkout.c:1017 +#: builtin/checkout.c:1018 msgid "git checkout: -f and -m are incompatible" msgstr "git checkout：-f 和 -m 不兼容" -#: builtin/checkout.c:1051 +#: builtin/checkout.c:1052 msgid "invalid path specification" msgstr "无效的路径规格" -#: builtin/checkout.c:1059 +#: builtin/checkout.c:1060 #, c-format msgid "" "git checkout: updating paths is incompatible with switching branches.\n" @@ -1176,26 +1195,26 @@ msgstr "" "git checkout：更新路径和切换分支不兼容。\n" "您是想要检出 '%s' 但未能将其解析为提交么？" -#: builtin/checkout.c:1061 +#: builtin/checkout.c:1062 msgid "git checkout: updating paths is incompatible with switching branches." msgstr "git checkout：更新路径和切换分支不兼容。" -#: builtin/checkout.c:1066 +#: builtin/checkout.c:1067 msgid "git checkout: --detach does not take a path argument" msgstr "git checkout：--detach 不跟路径参数" -#: builtin/checkout.c:1069 +#: builtin/checkout.c:1070 msgid "" "git checkout: --ours/--theirs, --force and --merge are incompatible when\n" "checking out of the index." msgstr "" "git checkout：在从索引检出时，--ours/--theirs、--force 和 --merge 不兼容。" -#: builtin/checkout.c:1088 +#: builtin/checkout.c:1089 msgid "Cannot switch branch to a non-commit." msgstr "无法切换分支到一个非提交。" -#: builtin/checkout.c:1091 +#: builtin/checkout.c:1092 msgid "--ours/--theirs is incompatible with switching branches." msgstr "--ours/--theirs 和切换分支不兼容。" @@ -1452,67 +1471,67 @@ msgstr "无法读取索引" msgid "unable to write temporary index file" msgstr "无法写临时索引文件" -#: builtin/commit.c:550 builtin/commit.c:556 +#: builtin/commit.c:561 builtin/commit.c:567 #, c-format msgid "invalid commit: %s" msgstr "无效的提交：%s" -#: builtin/commit.c:579 +#: builtin/commit.c:590 msgid "malformed --author parameter" msgstr "非法的 --author 参数" -#: builtin/commit.c:635 +#: builtin/commit.c:651 #, c-format msgid "Malformed ident string: '%s'" msgstr "非法的身份字符串：'%s'" -#: builtin/commit.c:670 builtin/commit.c:703 builtin/commit.c:1000 +#: builtin/commit.c:689 builtin/commit.c:722 builtin/commit.c:1033 #, c-format msgid "could not lookup commit %s" msgstr "不能查询提交 %s" -#: builtin/commit.c:682 builtin/shortlog.c:296 +#: builtin/commit.c:701 builtin/shortlog.c:296 #, c-format msgid "(reading log message from standard input)\n" msgstr "（正从标准输入中读取日志信息）\n" -#: builtin/commit.c:684 +#: builtin/commit.c:703 msgid "could not read log from standard input" msgstr "不能从标准输入中读取日志信息" -#: builtin/commit.c:688 +#: builtin/commit.c:707 #, c-format msgid "could not read log file '%s'" msgstr "不能读取日志文件 '%s'" -#: builtin/commit.c:694 +#: builtin/commit.c:713 msgid "commit has empty message" msgstr "提交说明为空" -#: builtin/commit.c:710 +#: builtin/commit.c:729 msgid "could not read MERGE_MSG" msgstr "不能读取 MERGE_MSG" -#: builtin/commit.c:714 +#: builtin/commit.c:733 msgid "could not read SQUASH_MSG" msgstr "不能读取 SQUASH_MSG" -#: builtin/commit.c:718 +#: builtin/commit.c:737 #, c-format msgid "could not read '%s'" msgstr "不能读取 '%s'" -#: builtin/commit.c:746 +#: builtin/commit.c:765 #, c-format msgid "could not open '%s'" msgstr "不能打开 '%s'" -#: builtin/commit.c:770 +#: builtin/commit.c:789 msgid "could not write commit template" msgstr "不能写提交模版" # 译者：%s若翻为中文，前后不需要空格 -#: builtin/commit.c:783 +#: builtin/commit.c:799 #, c-format msgid "" "\n" @@ -1527,12 +1546,12 @@ msgstr "" "\t%s\n" "然后重试。\n" -#: builtin/commit.c:796 +#: builtin/commit.c:812 msgid "Please enter the commit message for your changes." msgstr "请为您的修改输入提交说明。" # 译者：中文字符串拼接，可删除前导空格 -#: builtin/commit.c:799 +#: builtin/commit.c:815 msgid "" " Lines starting\n" "with '#' will be ignored, and an empty message aborts the commit.\n" @@ -1541,7 +1560,7 @@ msgstr "" "的行将被忽略，并且空的提交说明将会中止提交。\n" # 译者：中文字符串拼接，可删除前导空格 -#: builtin/commit.c:804 +#: builtin/commit.c:820 msgid "" " Lines starting\n" "with '#' will be kept; you may remove them yourself if you want to.\n" @@ -1552,153 +1571,158 @@ msgstr "" "中止提交。\n" # 译者：为保证在输出中对齐，注意调整句中空格！ -#: builtin/commit.c:816 +#: builtin/commit.c:832 #, c-format msgid "%sAuthor: %s" msgstr "%s作者： %s" # 译者：为保证在输出中对齐，注意调整句中空格！ -#: builtin/commit.c:823 +#: builtin/commit.c:839 #, c-format msgid "%sCommitter: %s" msgstr "%s提交者： %s" -#: builtin/commit.c:843 +#: builtin/commit.c:859 msgid "Cannot read index" msgstr "无法读取索引" -#: builtin/commit.c:880 +#: builtin/commit.c:896 msgid "Error building trees" msgstr "无法创建树对象" -#: builtin/commit.c:895 builtin/tag.c:357 +#: builtin/commit.c:911 builtin/tag.c:357 #, c-format msgid "Please supply the message using either -m or -F option.\n" msgstr "请使用 -m 或者 -F 选项提供提交说明。\n" -#: builtin/commit.c:975 +#: builtin/commit.c:1008 #, c-format msgid "No existing author found with '%s'" msgstr "没有找到匹配 '%s' 的作者" -#: builtin/commit.c:990 builtin/commit.c:1182 +#: builtin/commit.c:1023 builtin/commit.c:1217 #, c-format msgid "Invalid untracked files mode '%s'" msgstr "无效的未追踪文件参数 '%s'" -#: builtin/commit.c:1030 +#: builtin/commit.c:1063 msgid "Using both --reset-author and --author does not make sense" msgstr "同时使用 --reset-author 和 --author 没有意义" -#: builtin/commit.c:1041 +#: builtin/commit.c:1074 msgid "You have nothing to amend." msgstr "您没有可修补的提交。" # 译者：%s若翻为中文，前后不需要空格 -#: builtin/commit.c:1043 +#: builtin/commit.c:1076 #, c-format msgid "You are in the middle of a %s -- cannot amend." msgstr "您正处于一个%s的过程中 -- 无法修补提交。" -#: builtin/commit.c:1045 +#: builtin/commit.c:1078 msgid "Options --squash and --fixup cannot be used together" msgstr "选项 --squash 和 --fixup 不能共用" -#: builtin/commit.c:1055 +#: builtin/commit.c:1088 msgid "Only one of -c/-C/-F/--fixup can be used." msgstr "只能用一个 -c/-C/-F/--fixup 选项。" -#: builtin/commit.c:1057 +#: builtin/commit.c:1090 msgid "Option -m cannot be combined with -c/-C/-F/--fixup." msgstr "选项 -m 不能和 -c/-C/-F/--fixup 共用。" -#: builtin/commit.c:1063 +#: builtin/commit.c:1098 msgid "--reset-author can be used only with -C, -c or --amend." msgstr "--reset-author 只能和 -C、-c 或 --amend 共用。" -#: builtin/commit.c:1080 +#: builtin/commit.c:1115 msgid "Only one of --include/--only/--all/--interactive/--patch can be used." msgstr "只能用一个 --include/--only/--all/--interactive/--patch 选项。" -#: builtin/commit.c:1082 +#: builtin/commit.c:1117 msgid "No paths with --include/--only does not make sense." msgstr "参数 --include/--only 不跟路径没有意义。" -#: builtin/commit.c:1084 +#: builtin/commit.c:1119 msgid "Clever... amending the last one with dirty index." msgstr "聪明... 在索引不干净下修补最后的提交。" -#: builtin/commit.c:1086 +#: builtin/commit.c:1121 msgid "Explicit paths specified without -i nor -o; assuming --only paths..." msgstr "指定了明确的路径而没有使用 -i 或 -o 选项；认为是 --only paths..." -#: builtin/commit.c:1096 builtin/tag.c:556 +#: builtin/commit.c:1131 builtin/tag.c:556 #, c-format msgid "Invalid cleanup mode %s" msgstr "无效的清理模式 %s" -#: builtin/commit.c:1101 +#: builtin/commit.c:1136 msgid "Paths with -a does not make sense." msgstr "路径和 -a 选项共用没有意义。" -#: builtin/commit.c:1280 +#: builtin/commit.c:1315 msgid "couldn't look up newly created commit" msgstr "无法找到新创建的提交" -#: builtin/commit.c:1282 +#: builtin/commit.c:1317 msgid "could not parse newly created commit" msgstr "不能解析新创建的提交" -#: builtin/commit.c:1323 +#: builtin/commit.c:1358 msgid "detached HEAD" msgstr "分离头指针" # 译者：中文字符串拼接，可删除前导空格 -#: builtin/commit.c:1325 +#: builtin/commit.c:1360 msgid " (root-commit)" msgstr "（根提交）" -#: builtin/commit.c:1415 +#: builtin/commit.c:1450 msgid "could not parse HEAD commit" msgstr "不能解析 HEAD 提交" -#: builtin/commit.c:1452 builtin/merge.c:509 +#: builtin/commit.c:1487 builtin/merge.c:509 #, c-format msgid "could not open '%s' for reading" msgstr "不能为读入打开 '%s'" -#: builtin/commit.c:1459 +#: builtin/commit.c:1494 #, c-format msgid "Corrupt MERGE_HEAD file (%s)" msgstr "损坏的 MERGE_HEAD 文件（%s）" -#: builtin/commit.c:1466 +#: builtin/commit.c:1501 msgid "could not read MERGE_MODE" msgstr "不能读取 MERGE_MODE" -#: builtin/commit.c:1485 +#: builtin/commit.c:1520 #, c-format msgid "could not read commit message: %s" msgstr "不能读取提交说明：%s" -#: builtin/commit.c:1499 +#: builtin/commit.c:1534 +#, c-format +msgid "Aborting commit; you did not edit the message.\n" +msgstr "终止提交；您未更改来自模版的提交说明。\n" + +#: builtin/commit.c:1539 #, c-format msgid "Aborting commit due to empty commit message.\n" msgstr "终止提交因为提交说明为空。\n" -#: builtin/commit.c:1514 builtin/merge.c:935 builtin/merge.c:968 +#: builtin/commit.c:1554 builtin/merge.c:936 builtin/merge.c:961 msgid "failed to write commit object" msgstr "无法写提交对象" -#: builtin/commit.c:1535 +#: builtin/commit.c:1575 msgid "cannot lock HEAD ref" msgstr "无法锁定 HEAD 引用" -#: builtin/commit.c:1539 +#: builtin/commit.c:1579 msgid "cannot update HEAD ref" msgstr "无法更新 HEAD 引用" -#: builtin/commit.c:1550 +#: builtin/commit.c:1590 msgid "" "Repository has been updated, but unable to write\n" "new_index file. Check that disk is not full or quota is\n" @@ -1829,69 +1853,73 @@ msgstr "提供了无法处理的对象 '%s'。" msgid "Couldn't find remote ref HEAD" msgstr "无法发现远程 HEAD 引用" -#: builtin/fetch.c:252 +#: builtin/fetch.c:253 #, c-format msgid "object %s not found" msgstr "对象 %s 未发现" -#: builtin/fetch.c:258 +#: builtin/fetch.c:259 msgid "[up to date]" msgstr "[最新]" -#: builtin/fetch.c:272 +#: builtin/fetch.c:273 #, c-format msgid "! %-*s %-*s -> %s (can't fetch in current branch)" msgstr "! %-*s %-*s -> %s （在当前分支下不能获取）" -#: builtin/fetch.c:273 builtin/fetch.c:351 +#: builtin/fetch.c:274 builtin/fetch.c:360 msgid "[rejected]" msgstr "[已拒绝]" -#: builtin/fetch.c:284 +#: builtin/fetch.c:285 msgid "[tag update]" msgstr "[tag更新]" # 译者：注意保持前导空格 -#: builtin/fetch.c:286 builtin/fetch.c:313 builtin/fetch.c:331 +#: builtin/fetch.c:287 builtin/fetch.c:322 builtin/fetch.c:340 msgid " (unable to update local ref)" msgstr " （不能更新本地引用）" -#: builtin/fetch.c:298 +#: builtin/fetch.c:305 msgid "[new tag]" msgstr "[新tag]" -#: builtin/fetch.c:302 +#: builtin/fetch.c:308 msgid "[new branch]" msgstr "[新分支]" -#: builtin/fetch.c:347 +#: builtin/fetch.c:311 +msgid "[new ref]" +msgstr "[新引用]" + +#: builtin/fetch.c:356 msgid "unable to update local ref" msgstr "不能更新本地引用" -#: builtin/fetch.c:347 +#: builtin/fetch.c:356 msgid "forced update" msgstr "强制更新" -#: builtin/fetch.c:353 +#: builtin/fetch.c:362 msgid "(non-fast-forward)" msgstr "（非快进式）" -#: builtin/fetch.c:384 builtin/fetch.c:676 +#: builtin/fetch.c:393 builtin/fetch.c:685 #, c-format msgid "cannot open %s: %s\n" msgstr "无法打开 %s：%s\n" -#: builtin/fetch.c:393 +#: builtin/fetch.c:402 #, c-format msgid "%s did not send all necessary objects\n" msgstr "%s 未发送所有必须的对象\n" -#: builtin/fetch.c:479 +#: builtin/fetch.c:488 #, c-format msgid "From %.*s\n" msgstr "来自 %.*s\n" -#: builtin/fetch.c:490 +#: builtin/fetch.c:499 #, c-format msgid "" "some local refs could not be updated; try running\n" @@ -1901,79 +1929,79 @@ msgstr "" " 'git remote prune %s' 来删除旧的、有冲突的分支" # 译者：注意保持前导空格 -#: builtin/fetch.c:540 +#: builtin/fetch.c:549 #, c-format msgid " (%s will become dangling)\n" msgstr " （%s 将成为悬空状态）\n" # 译者：注意保持前导空格 -#: builtin/fetch.c:541 +#: builtin/fetch.c:550 #, c-format msgid " (%s has become dangling)\n" msgstr " （%s 已成为悬空状态）\n" -#: builtin/fetch.c:548 +#: builtin/fetch.c:557 msgid "[deleted]" msgstr "[已删除]" -#: builtin/fetch.c:549 +#: builtin/fetch.c:558 msgid "(none)" msgstr "（无）" -#: builtin/fetch.c:666 +#: builtin/fetch.c:675 #, c-format msgid "Refusing to fetch into current branch %s of non-bare repository" msgstr "拒绝获取到非裸版本库的当前分支 %s" -#: builtin/fetch.c:700 +#: builtin/fetch.c:709 #, c-format msgid "Don't know how to fetch from %s" msgstr "不知道如何从 %s 获取" -#: builtin/fetch.c:777 +#: builtin/fetch.c:786 #, c-format msgid "Option \"%s\" value \"%s\" is not valid for %s" msgstr "选项 \"%s\" 的值 \"%s\" 对于 %s 是无效的" -#: builtin/fetch.c:780 +#: builtin/fetch.c:789 #, c-format msgid "Option \"%s\" is ignored for %s\n" msgstr "选项 \"%s\" 对于 %s 被忽略\n" -#: builtin/fetch.c:879 +#: builtin/fetch.c:888 #, c-format msgid "Fetching %s\n" msgstr "正在获取 %s\n" -#: builtin/fetch.c:881 +#: builtin/fetch.c:890 #, c-format msgid "Could not fetch %s" msgstr "不能获取 %s" -#: builtin/fetch.c:898 +#: builtin/fetch.c:907 msgid "" "No remote repository specified. Please, specify either a URL or a\n" "remote name from which new revisions should be fetched." msgstr "未指定远程版本库。请通过一个URL或远程版本库名指定，用以获取新提交。" -#: builtin/fetch.c:918 +#: builtin/fetch.c:927 msgid "You need to specify a tag name." msgstr "您需要指定一个 tag 名称。" -#: builtin/fetch.c:970 +#: builtin/fetch.c:979 msgid "fetch --all does not take a repository argument" msgstr "fetch --all 不能带一个版本库参数" -#: builtin/fetch.c:972 +#: builtin/fetch.c:981 msgid "fetch --all does not make sense with refspecs" msgstr "fetch --all 带引用表达式没有任何意义" -#: builtin/fetch.c:983 +#: builtin/fetch.c:992 #, c-format msgid "No such remote or remote group: %s" msgstr "没有这样的远程或远程组：%s" -#: builtin/fetch.c:991 +#: builtin/fetch.c:1000 msgid "Fetching a group and specifying refspecs does not make sense" msgstr "获取组并指定引用表达式没有意义" @@ -2202,7 +2230,8 @@ msgid "" "%s (or --work-tree=<directory>) not allowed without specifying %s (or --git-" "dir=<directory>)" msgstr "" -"不允许 %s（或 --work-tree=<directory>）而没有指定 %s（或 --git-dir=<directory>）" +"不允许 %s（或 --work-tree=<directory>）而没有指定 %s（或 --git-" +"dir=<directory>）" #: builtin/init-db.c:578 msgid "Cannot access current working directory" @@ -2213,164 +2242,164 @@ msgstr "不能访问当前工作目录" msgid "Cannot access work tree '%s'" msgstr "不能访问工作区 '%s'" -#: builtin/log.c:187 +#: builtin/log.c:188 #, c-format msgid "Final output: %d %s\n" msgstr "最终输出：%d %s\n" -#: builtin/log.c:395 builtin/log.c:483 +#: builtin/log.c:401 builtin/log.c:489 #, c-format msgid "Could not read object %s" msgstr "不能读取对象 %s" -#: builtin/log.c:507 +#: builtin/log.c:513 #, c-format msgid "Unknown type: %d" msgstr "未知类型：%d" -#: builtin/log.c:596 +#: builtin/log.c:602 msgid "format.headers without value" msgstr "format.headers 没有值" -#: builtin/log.c:669 +#: builtin/log.c:675 msgid "name of output directory is too long" msgstr "输出目录名太长" -#: builtin/log.c:680 +#: builtin/log.c:686 #, c-format msgid "Cannot open patch file %s" msgstr "无法打开补丁文件 %s" -#: builtin/log.c:694 +#: builtin/log.c:700 msgid "Need exactly one range." msgstr "只需要一个范围。" -#: builtin/log.c:702 +#: builtin/log.c:708 msgid "Not a range." msgstr "不是一个范围。" -#: builtin/log.c:739 +#: builtin/log.c:745 msgid "Could not extract email from committer identity." msgstr "不能从提交者身份中提取邮件地址。" -#: builtin/log.c:785 +#: builtin/log.c:791 msgid "Cover letter needs email format" msgstr "信封需要邮件地址格式" -#: builtin/log.c:879 +#: builtin/log.c:885 #, c-format msgid "insane in-reply-to: %s" msgstr "不正常的 in-reply-to：%s" -#: builtin/log.c:952 +#: builtin/log.c:958 msgid "Two output directories?" msgstr "两个输出目录？" -#: builtin/log.c:1173 +#: builtin/log.c:1179 #, c-format msgid "bogus committer info %s" msgstr "虚假的提交者信息 %s" -#: builtin/log.c:1218 +#: builtin/log.c:1224 msgid "-n and -k are mutually exclusive." msgstr "-n 和 -k 互斥。" -#: builtin/log.c:1220 +#: builtin/log.c:1226 msgid "--subject-prefix and -k are mutually exclusive." msgstr "--subject-prefix 和 -k 互斥。" -#: builtin/log.c:1225 builtin/shortlog.c:284 +#: builtin/log.c:1231 builtin/shortlog.c:284 #, c-format msgid "unrecognized argument: %s" msgstr "未识别的参数：%s" -#: builtin/log.c:1228 +#: builtin/log.c:1234 msgid "--name-only does not make sense" msgstr "--name-only 无意义" -#: builtin/log.c:1230 +#: builtin/log.c:1236 msgid "--name-status does not make sense" msgstr "--name-status 无意义" -#: builtin/log.c:1232 +#: builtin/log.c:1238 msgid "--check does not make sense" msgstr "--check 无意义" -#: builtin/log.c:1255 +#: builtin/log.c:1261 msgid "standard output, or directory, which one?" msgstr "标准输出或目录，哪一个？" -#: builtin/log.c:1257 +#: builtin/log.c:1263 #, c-format msgid "Could not create directory '%s'" msgstr "不能创建目录 '%s'" -#: builtin/log.c:1410 +#: builtin/log.c:1416 msgid "Failed to create output files" msgstr "无法创建输出文件" -#: builtin/log.c:1514 +#: builtin/log.c:1520 #, c-format msgid "" "Could not find a tracked remote branch, please specify <upstream> manually.\n" msgstr "不能找到跟踪的远程分支，请手工指定 <upstream>。\n" -#: builtin/log.c:1530 builtin/log.c:1532 builtin/log.c:1544 +#: builtin/log.c:1536 builtin/log.c:1538 builtin/log.c:1550 #, c-format msgid "Unknown commit %s" msgstr "未知提交 %s" -#: builtin/merge.c:91 +#: builtin/merge.c:90 msgid "switch `m' requires a value" msgstr "开关 `m' 需要一个值" -#: builtin/merge.c:128 +#: builtin/merge.c:127 #, c-format msgid "Could not find merge strategy '%s'.\n" msgstr "不能找到合并策略 '%s'。\n" -#: builtin/merge.c:129 +#: builtin/merge.c:128 #, c-format msgid "Available strategies are:" msgstr "可用的策略有：" -#: builtin/merge.c:134 +#: builtin/merge.c:133 #, c-format msgid "Available custom strategies are:" msgstr "可用的自定义策略有：" -#: builtin/merge.c:241 +#: builtin/merge.c:240 msgid "could not run stash." msgstr "不能进行进度保存。" -#: builtin/merge.c:246 +#: builtin/merge.c:245 msgid "stash failed" msgstr "进度保存失败" -#: builtin/merge.c:251 +#: builtin/merge.c:250 #, c-format msgid "not a valid object: %s" msgstr "不是一个有效对象：%s" -#: builtin/merge.c:270 builtin/merge.c:287 +#: builtin/merge.c:269 builtin/merge.c:286 msgid "read-tree failed" msgstr "读取树失败" # 译者：注意保持前导空格 -#: builtin/merge.c:317 +#: builtin/merge.c:316 msgid " (nothing to squash)" msgstr " （无可压缩）" -#: builtin/merge.c:330 +#: builtin/merge.c:329 #, c-format msgid "Squash commit -- not updating HEAD\n" msgstr "压缩提交 -- 未更新 HEAD\n" -#: builtin/merge.c:362 +#: builtin/merge.c:361 msgid "Writing SQUASH_MSG" msgstr "写入 SQUASH_MSG" -#: builtin/merge.c:364 +#: builtin/merge.c:363 msgid "Finishing SQUASH_MSG" msgstr "完成 SQUASH_MSG" @@ -2397,35 +2426,35 @@ msgstr "git write-tree 无法写入一树对象" msgid "failed to read the cache" msgstr "无法读取缓存" -#: builtin/merge.c:696 +#: builtin/merge.c:697 msgid "Unable to write index." msgstr "不能写索引。" -#: builtin/merge.c:709 +#: builtin/merge.c:710 msgid "Not handling anything other than two heads merge." msgstr "不能处理两个头合并之外的任何操作。" -#: builtin/merge.c:723 +#: builtin/merge.c:724 #, c-format msgid "Unknown option for merge-recursive: -X%s" msgstr "merge-recursive 的未知选项：-X%s" -#: builtin/merge.c:737 +#: builtin/merge.c:738 #, c-format msgid "unable to write %s" msgstr "不能写 %s" -#: builtin/merge.c:876 +#: builtin/merge.c:877 #, c-format msgid "Could not read from '%s'" msgstr "不能从 '%s' 读取" -#: builtin/merge.c:885 +#: builtin/merge.c:886 #, c-format msgid "Not committing merge; use 'git commit' to complete the merge.\n" msgstr "未提交合并，使用 'git commit' 完成此次合并。\n" -#: builtin/merge.c:891 +#: builtin/merge.c:892 msgid "" "Please enter a commit message to explain why this merge is necessary,\n" "especially if it merges an updated upstream into a topic branch.\n" @@ -2438,47 +2467,52 @@ msgstr "" "\n" "以 '#' 开头的行将被忽略，而且空提交说明将会终止提交。\n" -#: builtin/merge.c:915 +#: builtin/merge.c:916 msgid "Empty commit message." msgstr "空提交信息。" -#: builtin/merge.c:927 +#: builtin/merge.c:928 #, c-format msgid "Wonderful.\n" msgstr "太棒了。\n" -#: builtin/merge.c:1000 +#: builtin/merge.c:993 #, c-format msgid "Automatic merge failed; fix conflicts and then commit the result.\n" msgstr "自动合并失败，修正冲突然后提交修正的结果。\n" -#: builtin/merge.c:1016 +#: builtin/merge.c:1009 #, c-format msgid "'%s' is not a commit" msgstr "'%s' 不是一个提交" -#: builtin/merge.c:1057 +#: builtin/merge.c:1050 msgid "No current branch." msgstr "没有当前分支。" -#: builtin/merge.c:1059 +#: builtin/merge.c:1052 msgid "No remote for the current branch." msgstr "当前分支没有对应的远程版本库。" -#: builtin/merge.c:1061 +#: builtin/merge.c:1054 msgid "No default upstream defined for the current branch." msgstr "当前分支没有定义默认的上游分支。" -#: builtin/merge.c:1066 +#: builtin/merge.c:1059 #, c-format msgid "No remote tracking branch for %s from %s" msgstr "%s 没有来自 %s 的远程跟踪分支" -#: builtin/merge.c:1188 +#: builtin/merge.c:1146 builtin/merge.c:1303 +#, c-format +msgid "%s - not something we can merge" +msgstr "%s - 不能被合并" + +#: builtin/merge.c:1214 msgid "There is no merge to abort (MERGE_HEAD missing)." msgstr "没有要终止的合并（MERGE_HEAD 丢失）。" -#: builtin/merge.c:1204 git-pull.sh:31 +#: builtin/merge.c:1230 git-pull.sh:31 msgid "" "You have not concluded your merge (MERGE_HEAD exists).\n" "Please, commit your changes before you can merge." @@ -2486,11 +2520,11 @@ msgstr "" "您尚未结束您的合并（存在 MERGE_HEAD）。\n" "请在合并前先提交您的修改。" -#: builtin/merge.c:1207 git-pull.sh:34 +#: builtin/merge.c:1233 git-pull.sh:34 msgid "You have not concluded your merge (MERGE_HEAD exists)." msgstr "您尚未结束您的合并（存在 MERGE_HEAD）。" -#: builtin/merge.c:1211 +#: builtin/merge.c:1237 msgid "" "You have not concluded your cherry-pick (CHERRY_PICK_HEAD exists).\n" "Please, commit your changes before you can merge." @@ -2498,84 +2532,79 @@ msgstr "" "您尚未结束您的拣选（存在 CHERRY_PICK_HEAD）。\n" "请在合并前先提交您的修改。" -#: builtin/merge.c:1214 +#: builtin/merge.c:1240 msgid "You have not concluded your cherry-pick (CHERRY_PICK_HEAD exists)." msgstr "您尚未结束您的拣选（存在 CHERRY_PICK_HEAD）。" -#: builtin/merge.c:1223 +#: builtin/merge.c:1249 msgid "You cannot combine --squash with --no-ff." msgstr "您不能将 --squash 与 --no-ff 共用。" -#: builtin/merge.c:1228 +#: builtin/merge.c:1254 msgid "You cannot combine --no-ff with --ff-only." msgstr "您不能将 --no-ff 与 --ff-only 共用。" -#: builtin/merge.c:1235 +#: builtin/merge.c:1261 msgid "No commit specified and merge.defaultToUpstream not set." msgstr "未指定提交并且 merge.defaultToUpstream 未设置。" -#: builtin/merge.c:1266 +#: builtin/merge.c:1293 msgid "Can merge only exactly one commit into empty head" msgstr "只能将一个提交合并到空分支上" -#: builtin/merge.c:1269 +#: builtin/merge.c:1296 msgid "Squash commit into empty head not supported yet" msgstr "尚不支持到空分支的压缩提交" -#: builtin/merge.c:1271 +#: builtin/merge.c:1298 msgid "Non-fast-forward commit does not make sense into an empty head" msgstr "到空分支的非快进式提交没有意义" -#: builtin/merge.c:1275 builtin/merge.c:1319 -#, c-format -msgid "%s - not something we can merge" -msgstr "%s - 不能被合并" - -#: builtin/merge.c:1385 +#: builtin/merge.c:1413 #, c-format msgid "Updating %s..%s\n" msgstr "更新 %s..%s\n" -#: builtin/merge.c:1423 +#: builtin/merge.c:1451 #, c-format msgid "Trying really trivial in-index merge...\n" msgstr "尝试非常小的索引内合并...\n" -#: builtin/merge.c:1430 +#: builtin/merge.c:1458 #, c-format msgid "Nope.\n" msgstr "无。\n" -#: builtin/merge.c:1462 +#: builtin/merge.c:1490 msgid "Not possible to fast-forward, aborting." msgstr "无法快进，终止。" -#: builtin/merge.c:1485 builtin/merge.c:1562 +#: builtin/merge.c:1513 builtin/merge.c:1592 #, c-format msgid "Rewinding the tree to pristine...\n" msgstr "将树回滚至原始状态...\n" -#: builtin/merge.c:1489 +#: builtin/merge.c:1517 #, c-format msgid "Trying merge strategy %s...\n" msgstr "尝试合并策略 %s...\n" -#: builtin/merge.c:1553 +#: builtin/merge.c:1583 #, c-format msgid "No merge strategy handled the merge.\n" msgstr "没有合并策略处理此合并。\n" -#: builtin/merge.c:1555 +#: builtin/merge.c:1585 #, c-format msgid "Merge with strategy %s failed.\n" msgstr "使用策略 %s 合并失败。\n" -#: builtin/merge.c:1564 +#: builtin/merge.c:1594 #, c-format msgid "Using the %s to prepare resolving by hand.\n" msgstr "使用 %s 以准备手工解决。\n" -#: builtin/merge.c:1575 +#: builtin/merge.c:1606 #, c-format msgid "Automatic merge went well; stopped before committing as requested\n" msgstr "自动合并进展顺利，按要求在提交前停止\n" @@ -2816,15 +2845,15 @@ msgstr "选项 %s 不接受否定格式" msgid "unable to parse value '%s' for option %s" msgstr "不能解析值 '%s' 针对于选项 %s" -#: builtin/push.c:44 +#: builtin/push.c:45 msgid "tag shorthand without <tag>" msgstr "tag 简写没有跟 <tag> 参数" -#: builtin/push.c:63 +#: builtin/push.c:64 msgid "--delete only accepts plain target ref names" msgstr "--delete 只接受简单的目标引用名" -#: builtin/push.c:73 +#: builtin/push.c:84 #, c-format msgid "" "You are not currently on a branch.\n" @@ -2838,7 +2867,7 @@ msgstr "" "\n" " git push %s HEAD:<name-of-remote-branch>\n" -#: builtin/push.c:80 +#: builtin/push.c:91 #, c-format msgid "" "The current branch %s has no upstream branch.\n" @@ -2851,43 +2880,75 @@ msgstr "" "\n" " git push --set-upstream %s %s\n" -#: builtin/push.c:88 +#: builtin/push.c:99 #, c-format msgid "The current branch %s has multiple upstream branches, refusing to push." msgstr "当前分支 %s 有多个上游分支，拒绝推送。" -#: builtin/push.c:111 +#: builtin/push.c:102 +#, c-format +msgid "" +"You are pushing to remote '%s', which is not the upstream of\n" +"your current branch '%s', without telling me what to push\n" +"to update which remote branch." +msgstr "" +"您正推送至远程 '%s'（其并非当前分支 '%s' 的上游），\n" +"而没有告诉我要推送什么、更新哪个远程分支。" + +#: builtin/push.c:131 msgid "" "You didn't specify any refspecs to push, and push.default is \"nothing\"." msgstr "您没有为推送指定任何引用表达式，并且 push.default 为 \"nothing\"。" -#: builtin/push.c:131 +#: builtin/push.c:138 +msgid "" +"Updates were rejected because the tip of your current branch is behind\n" +"its remote counterpart. Merge the remote changes (e.g. 'git pull')\n" +"before pushing again.\n" +"See the 'Note about fast-forwards' in 'git push --help' for details." +msgstr "" +"更新被拒绝，因为您当前分支落后于对应的远程分支。再次推送前先与远程变更\n" +"合并（如 'git pull'）。\n" +"详见 'git push --help' 中的 'Note about fast-forwards' 的内容。" + +#: builtin/push.c:144 +msgid "" +"Updates were rejected because a pushed branch tip is behind its remote\n" +"counterpart. If you did not intend to push that branch, you may want to\n" +"specify branches to push or set the 'push.default' configuration\n" +"variable to 'current' or 'upstream' to push only the current branch." +msgstr "" +"更新被拒绝，因为推送的一个分支落后于对应的远程分支。如果您并非有意推送\n" +"该分支，您可以指定要推送的分支或者设置 'push.default' 配置变量为\n" +"'current' 或 'upstream' 以便只推送当前分支。" + +#: builtin/push.c:150 +msgid "" +"Updates were rejected because a pushed branch tip is behind its remote\n" +"counterpart. Check out this branch and merge the remote changes\n" +"(e.g. 'git pull') before pushing again.\n" +"See the 'Note about fast-forwards' in 'git push --help' for details." +msgstr "" +"更新被拒绝，因为推送的一个分支落后于对应的远程分支。检出该分支并在再次\n" +"推送之前与远程变更合并（如 'git pull'）。\n" +"详见 'git push --help' 中的 'Note about fast-forwards' 的内容。" + +#: builtin/push.c:190 #, c-format msgid "Pushing to %s\n" msgstr "推送到 %s\n" -#: builtin/push.c:135 +#: builtin/push.c:194 #, c-format msgid "failed to push some refs to '%s'" msgstr "无法推送一些引用到 '%s'" -#: builtin/push.c:143 -#, c-format -msgid "" -"To prevent you from losing history, non-fast-forward updates were rejected\n" -"Merge the remote changes (e.g. 'git pull') before pushing again. See the\n" -"'Note about fast-forwards' section of 'git push --help' for details.\n" -msgstr "" -"为了防止您丢失提交历史，非快进式更新被拒绝。\n" -"再次推送前先与远程变更合并（如 'git pull'）。详见\n" -"'git push --help' 中的 'Note about fast-forwards' 小节。\n" - -#: builtin/push.c:160 +#: builtin/push.c:226 #, c-format msgid "bad repository '%s'" msgstr "坏的版本库 '%s'" -#: builtin/push.c:161 +#: builtin/push.c:227 msgid "" "No configured push destination.\n" "Either specify the URL from the command-line or configure a remote " @@ -2908,31 +2969,31 @@ msgstr "" "\n" " git push <name>\n" -#: builtin/push.c:176 +#: builtin/push.c:242 msgid "--all and --tags are incompatible" msgstr "--all 和 --tags 不兼容" -#: builtin/push.c:177 +#: builtin/push.c:243 msgid "--all can't be combined with refspecs" msgstr "--all 不能和引用表达式共用" -#: builtin/push.c:182 +#: builtin/push.c:248 msgid "--mirror and --tags are incompatible" msgstr "--mirror 和 --tags 不兼容" -#: builtin/push.c:183 +#: builtin/push.c:249 msgid "--mirror can't be combined with refspecs" msgstr "--mirror 不能和引用表达式共用" -#: builtin/push.c:188 +#: builtin/push.c:254 msgid "--all and --mirror are incompatible" msgstr "--all 和 --mirror 不兼容" -#: builtin/push.c:274 +#: builtin/push.c:342 msgid "--delete is incompatible with --all, --mirror and --tags" msgstr "--delete 与 --all、--mirror 及 --tags 不兼容" -#: builtin/push.c:276 +#: builtin/push.c:344 msgid "--delete doesn't make sense without any refs" msgstr "--delete 未接任何引用没有意义" @@ -3018,20 +3079,20 @@ msgstr "不能对裸版本库进行%s重置" msgid "Could not reset index file to revision '%s'." msgstr "不能重置索引文件至版本 '%s'。" -#: builtin/revert.c:70 builtin/revert.c:91 +#: builtin/revert.c:70 builtin/revert.c:92 #, c-format msgid "%s: %s cannot be used with %s" msgstr "%s：%s 不能和 %s 共用" -#: builtin/revert.c:126 +#: builtin/revert.c:127 msgid "program error" msgstr "程序错误" -#: builtin/revert.c:209 +#: builtin/revert.c:213 msgid "revert failed" msgstr "还原失败" -#: builtin/revert.c:224 +#: builtin/revert.c:228 msgid "cherry-pick failed" msgstr "拣选失败" @@ -3210,15 +3271,15 @@ msgstr "%s：不能更新引用" msgid "Updated tag '%s' (was %s)\n" msgstr "已更新tag '%s'（曾为 %s）\n" -#: git-am.sh:49 +#: git-am.sh:50 msgid "You need to set your committer info first" msgstr "您需要先设置你的提交者信息" -#: git-am.sh:136 +#: git-am.sh:137 msgid "Repository lacks necessary blobs to fall back on 3-way merge." msgstr "版本库缺乏必要的 blob 数据以进行三路合并。" -#: git-am.sh:147 +#: git-am.sh:154 msgid "" "Did you hand edit your patch?\n" "It does not apply to blobs recorded in its index." @@ -3226,46 +3287,46 @@ msgstr "" "您是否曾手动编辑过您的补丁？\n" "无法应用补丁到索引中的数据上。" -#: git-am.sh:156 +#: git-am.sh:163 msgid "Falling back to patching base and 3-way merge..." msgstr "回退到补丁基础版本并使用三路合并..." -#: git-am.sh:268 +#: git-am.sh:275 msgid "Only one StGIT patch series can be applied at once" msgstr "一次只能有一个 StGIT 补丁队列被应用" -#: git-am.sh:355 +#: git-am.sh:362 #, sh-format msgid "Patch format $patch_format is not supported." msgstr "不支持 $patch_format 补丁格式。" -#: git-am.sh:357 +#: git-am.sh:364 msgid "Patch format detection failed." msgstr "补丁格式检测失败。" -#: git-am.sh:411 +#: git-am.sh:418 msgid "-d option is no longer supported. Do not use." msgstr "不再支持 -d 选项。不要使用。" -#: git-am.sh:474 +#: git-am.sh:481 #, sh-format msgid "previous rebase directory $dotest still exists but mbox given." msgstr "之前的变基目录 $dotest 仍然存在但给出了mbox。" -#: git-am.sh:479 +#: git-am.sh:486 msgid "Please make up your mind. --skip or --abort?" msgstr "请下决心。--skip 或是 --abort ？" -#: git-am.sh:506 +#: git-am.sh:513 msgid "Resolve operation not in progress, we are not resuming." msgstr "解决操作未进行，我们不会继续。" -#: git-am.sh:572 +#: git-am.sh:579 #, sh-format msgid "Dirty index: cannot apply patches (dirty: $files)" msgstr "脏的索引：不能应用补丁（脏文件：$files）" -#: git-am.sh:748 +#: git-am.sh:755 msgid "cannot be interactive without stdin connected to a terminal." msgstr "标准输入没有和终端关联，不能进行交互式操作。" @@ -3273,20 +3334,20 @@ msgstr "标准输入没有和终端关联，不能进行交互式操作。" #. TRANSLATORS: Make sure to include [y], [n], [e], [v] and [a] #. in your translation. The program will only accept English #. input at this point. -#: git-am.sh:759 +#: git-am.sh:766 msgid "Apply? [y]es/[n]o/[e]dit/[v]iew patch/[a]ccept all " msgstr "应用？[y]es/[n]o/[e]dit/[v]iew patch/[a]ccept all " -#: git-am.sh:795 +#: git-am.sh:802 #, sh-format msgid "Applying: $FIRSTLINE" msgstr "正应用：$FIRSTLINE" -#: git-am.sh:840 +#: git-am.sh:847 msgid "No changes -- Patch already applied." msgstr "没有变更 -- 补丁已经应用过。" -#: git-am.sh:866 +#: git-am.sh:873 msgid "applying to an empty history" msgstr "正应用到一个空历史上" @@ -3525,166 +3586,166 @@ msgstr "（为恢复数据输入 \"git stash apply\"）" msgid "cannot strip one component off url '$remoteurl'" msgstr "无法从 url '$remoteurl' 剥离一个组件" -#: git-submodule.sh:108 +#: git-submodule.sh:109 #, sh-format -msgid "No submodule mapping found in .gitmodules for path '$path'" -msgstr "未在 .gitmodules 中发现路径 '$path' 的子模组映射" +msgid "No submodule mapping found in .gitmodules for path '$sm_path'" +msgstr "未在 .gitmodules 中发现路径 '$sm_path' 的子模组映射" -#: git-submodule.sh:149 +#: git-submodule.sh:150 #, sh-format -msgid "Clone of '$url' into submodule path '$path' failed" -msgstr "无法克隆 '$url' 到子模组路径 '$path'" +msgid "Clone of '$url' into submodule path '$sm_path' failed" +msgstr "无法克隆 '$url' 到子模组路径 '$sm_path'" -#: git-submodule.sh:159 +#: git-submodule.sh:160 #, sh-format msgid "Gitdir '$a' is part of the submodule path '$b' or vice versa" msgstr "Gitdir '$a' 在子模组路径 '$b' 之下或者相反" -#: git-submodule.sh:247 +#: git-submodule.sh:249 #, sh-format msgid "repo URL: '$repo' must be absolute or begin with ./|../" msgstr "版本库URL：'$repo' 必须是绝对路径或以 ./|../ 起始" -#: git-submodule.sh:264 +#: git-submodule.sh:266 #, sh-format -msgid "'$path' already exists in the index" -msgstr "'$path' 已经存在于索引中" +msgid "'$sm_path' already exists in the index" +msgstr "'$sm_path' 已经存在于索引中" -#: git-submodule.sh:281 +#: git-submodule.sh:283 #, sh-format -msgid "'$path' already exists and is not a valid git repo" -msgstr "'$path' 已存在且不是一个有效的 git 版本库" +msgid "'$sm_path' already exists and is not a valid git repo" +msgstr "'$sm_path' 已存在且不是一个有效的 git 版本库" -#: git-submodule.sh:295 +#: git-submodule.sh:297 #, sh-format -msgid "Unable to checkout submodule '$path'" -msgstr "不能检出子模组 '$path'" +msgid "Unable to checkout submodule '$sm_path'" +msgstr "不能检出子模组 '$sm_path'" -#: git-submodule.sh:300 +#: git-submodule.sh:302 #, sh-format -msgid "Failed to add submodule '$path'" -msgstr "无法添加子模组 '$path'" +msgid "Failed to add submodule '$sm_path'" +msgstr "无法添加子模组 '$sm_path'" -#: git-submodule.sh:305 +#: git-submodule.sh:307 #, sh-format -msgid "Failed to register submodule '$path'" -msgstr "无法注册子模组 '$path'" +msgid "Failed to register submodule '$sm_path'" +msgstr "无法注册子模组 '$sm_path'" -#: git-submodule.sh:347 +#: git-submodule.sh:349 #, sh-format -msgid "Entering '$prefix$path'" -msgstr "正在进入 '$prefix$path'" +msgid "Entering '$prefix$sm_path'" +msgstr "正在进入 '$prefix$sm_path'" -#: git-submodule.sh:359 +#: git-submodule.sh:363 #, sh-format -msgid "Stopping at '$path'; script returned non-zero status." -msgstr "停止于 '$path'，脚本返回非零值。" +msgid "Stopping at '$sm_path'; script returned non-zero status." +msgstr "停止于 '$sm_path'，脚本返回非零值。" -#: git-submodule.sh:401 +#: git-submodule.sh:405 #, sh-format -msgid "No url found for submodule path '$path' in .gitmodules" -msgstr "在 .gitmodules 中未找到子模组路径 '$path' 的 url" +msgid "No url found for submodule path '$sm_path' in .gitmodules" +msgstr "在 .gitmodules 中未找到子模组路径 '$sm_path' 的 url" -#: git-submodule.sh:410 +#: git-submodule.sh:414 #, sh-format -msgid "Failed to register url for submodule path '$path'" -msgstr "无法为子模组路径 '$path' 注册 url" +msgid "Failed to register url for submodule path '$sm_path'" +msgstr "无法为子模组路径 '$sm_path' 注册 url" -#: git-submodule.sh:418 +#: git-submodule.sh:422 #, sh-format -msgid "Failed to register update mode for submodule path '$path'" -msgstr "无法为子模组路径 '$path' 注册更新模式" +msgid "Failed to register update mode for submodule path '$sm_path'" +msgstr "无法为子模组路径 '$sm_path' 注册更新模式" -#: git-submodule.sh:420 +#: git-submodule.sh:424 #, sh-format -msgid "Submodule '$name' ($url) registered for path '$path'" -msgstr "子模组 '$name' ($url) 已为路径 '$path' 注册" +msgid "Submodule '$name' ($url) registered for path '$sm_path'" +msgstr "子模组 '$name' ($url) 已为路径 '$sm_path' 注册" -#: git-submodule.sh:519 +#: git-submodule.sh:523 #, sh-format msgid "" -"Submodule path '$path' not initialized\n" +"Submodule path '$sm_path' not initialized\n" "Maybe you want to use 'update --init'?" msgstr "" -"子模组路径 '$path' 没有初始化\n" +"子模组路径 '$sm_path' 没有初始化\n" "也许您想用 'update --init'？" -#: git-submodule.sh:532 +#: git-submodule.sh:536 #, sh-format -msgid "Unable to find current revision in submodule path '$path'" -msgstr "无法在子模组路径 '$path' 中找到当前版本" +msgid "Unable to find current revision in submodule path '$sm_path'" +msgstr "无法在子模组路径 '$sm_path' 中找到当前版本" -#: git-submodule.sh:551 +#: git-submodule.sh:555 #, sh-format -msgid "Unable to fetch in submodule path '$path'" -msgstr "无法在子模组路径 '$path' 中获取" +msgid "Unable to fetch in submodule path '$sm_path'" +msgstr "无法在子模组路径 '$sm_path' 中获取" -#: git-submodule.sh:565 +#: git-submodule.sh:569 #, sh-format -msgid "Unable to rebase '$sha1' in submodule path '$path'" -msgstr "无法在子模组路径 '$path' 中变基 '$sha1'" +msgid "Unable to rebase '$sha1' in submodule path '$sm_path'" +msgstr "无法在子模组路径 '$sm_path' 中变基 '$sha1'" -#: git-submodule.sh:566 +#: git-submodule.sh:570 #, sh-format -msgid "Submodule path '$path': rebased into '$sha1'" -msgstr "子模组路径 '$path'：变基至 '$sha1'" +msgid "Submodule path '$sm_path': rebased into '$sha1'" +msgstr "子模组路径 '$sm_path'：变基至 '$sha1'" -#: git-submodule.sh:571 +#: git-submodule.sh:575 #, sh-format -msgid "Unable to merge '$sha1' in submodule path '$path'" -msgstr "无法合并 '$sha1' 到子模组路径 '$path' 中" +msgid "Unable to merge '$sha1' in submodule path '$sm_path'" +msgstr "无法合并 '$sha1' 到子模组路径 '$sm_path' 中" -#: git-submodule.sh:572 +#: git-submodule.sh:576 #, sh-format -msgid "Submodule path '$path': merged in '$sha1'" -msgstr "子模组路径 '$path'：已合并入 '$sha1'" +msgid "Submodule path '$sm_path': merged in '$sha1'" +msgstr "子模组路径 '$sm_path'：已合并入 '$sha1'" -#: git-submodule.sh:577 +#: git-submodule.sh:581 #, sh-format -msgid "Unable to checkout '$sha1' in submodule path '$path'" -msgstr "无法在子模组路径 '$path' 中检出 '$sha1'" +msgid "Unable to checkout '$sha1' in submodule path '$sm_path'" +msgstr "无法在子模组路径 '$sm_path' 中检出 '$sha1'" -#: git-submodule.sh:578 +#: git-submodule.sh:582 #, sh-format -msgid "Submodule path '$path': checked out '$sha1'" -msgstr "子模组路径 '$path'：检出 '$sha1'" +msgid "Submodule path '$sm_path': checked out '$sha1'" +msgstr "子模组路径 '$sm_path'：检出 '$sha1'" -#: git-submodule.sh:600 git-submodule.sh:923 +#: git-submodule.sh:604 git-submodule.sh:927 #, sh-format -msgid "Failed to recurse into submodule path '$path'" -msgstr "无法递归进子模组路径 '$path'" +msgid "Failed to recurse into submodule path '$sm_path'" +msgstr "无法递归进子模组路径 '$sm_path'" -#: git-submodule.sh:708 +#: git-submodule.sh:712 msgid "--" msgstr "--" # 译者：注意保持前导空格 -#: git-submodule.sh:766 +#: git-submodule.sh:770 #, sh-format msgid " Warn: $name doesn't contain commit $sha1_src" msgstr " 警告：$name 未包含提交 $sha1_src" # 译者：注意保持前导空格 -#: git-submodule.sh:769 +#: git-submodule.sh:773 #, sh-format msgid " Warn: $name doesn't contain commit $sha1_dst" msgstr " 警告：$name 未包含提交 $sha1_dst" # 译者：注意保持前导空格 -#: git-submodule.sh:772 +#: git-submodule.sh:776 #, sh-format msgid " Warn: $name doesn't contain commits $sha1_src and $sha1_dst" msgstr " 警告：$name 未包含提交 $sha1_src 和 $sha1_dst" -#: git-submodule.sh:797 +#: git-submodule.sh:801 msgid "blob" msgstr "blob" -#: git-submodule.sh:798 +#: git-submodule.sh:802 msgid "submodule" msgstr "子模组" -#: git-submodule.sh:969 +#: git-submodule.sh:973 #, sh-format msgid "Synchronizing submodule url for '$name'" msgstr "为 '$name' 同步子模组 url" diff --git a/read-cache.c b/read-cache.c index 6c8f395..ef355cc 100644 --- a/read-cache.c +++ b/read-cache.c @@ -12,6 +12,8 @@ #include "commit.h" #include "blob.h" #include "resolve-undo.h" +#include "strbuf.h" +#include "varint.h" static struct cache_entry *refresh_cache_entry(struct cache_entry *ce, int really); @@ -1179,15 +1181,74 @@ static struct cache_entry *refresh_cache_entry(struct cache_entry *ce, int reall return refresh_cache_ent(&the_index, ce, really, NULL, NULL); } + +/***************************************************************** + * Index File I/O + *****************************************************************/ + +#define INDEX_FORMAT_DEFAULT 3 + +/* + * dev/ino/uid/gid/size are also just tracked to the low 32 bits + * Again - this is just a (very strong in practice) heuristic that + * the inode hasn't changed. + * + * We save the fields in big-endian order to allow using the + * index file over NFS transparently. + */ +struct ondisk_cache_entry { + struct cache_time ctime; + struct cache_time mtime; + unsigned int dev; + unsigned int ino; + unsigned int mode; + unsigned int uid; + unsigned int gid; + unsigned int size; + unsigned char sha1[20]; + unsigned short flags; + char name[FLEX_ARRAY]; /* more */ +}; + +/* + * This struct is used when CE_EXTENDED bit is 1 + * The struct must match ondisk_cache_entry exactly from + * ctime till flags + */ +struct ondisk_cache_entry_extended { + struct cache_time ctime; + struct cache_time mtime; + unsigned int dev; + unsigned int ino; + unsigned int mode; + unsigned int uid; + unsigned int gid; + unsigned int size; + unsigned char sha1[20]; + unsigned short flags; + unsigned short flags2; + char name[FLEX_ARRAY]; /* more */ +}; + +/* These are only used for v3 or lower */ +#define align_flex_name(STRUCT,len) ((offsetof(struct STRUCT,name) + (len) + 8) & ~7) +#define ondisk_cache_entry_size(len) align_flex_name(ondisk_cache_entry,len) +#define ondisk_cache_entry_extended_size(len) align_flex_name(ondisk_cache_entry_extended,len) +#define ondisk_ce_size(ce) (((ce)->ce_flags & CE_EXTENDED) ? \ + ondisk_cache_entry_extended_size(ce_namelen(ce)) : \ + ondisk_cache_entry_size(ce_namelen(ce))) + static int verify_hdr(struct cache_header *hdr, unsigned long size) { git_SHA_CTX c; unsigned char sha1[20]; + int hdr_version; if (hdr->hdr_signature != htonl(CACHE_SIGNATURE)) return error("bad signature"); - if (hdr->hdr_version != htonl(2) && hdr->hdr_version != htonl(3)) - return error("bad index version"); + hdr_version = ntohl(hdr->hdr_version); + if (hdr_version < 2 || 4 < hdr_version) + return error("bad index version %d", hdr_version); git_SHA1_Init(&c); git_SHA1_Update(&c, hdr, size - 20); git_SHA1_Final(sha1, &c); @@ -1221,7 +1282,74 @@ int read_index(struct index_state *istate) return read_index_from(istate, get_index_file()); } -static struct cache_entry *create_from_disk(struct ondisk_cache_entry *ondisk) +#ifndef NEEDS_ALIGNED_ACCESS +#define ntoh_s(var) ntohs(var) +#define ntoh_l(var) ntohl(var) +#else +static inline uint16_t ntoh_s_force_align(void *p) +{ + uint16_t x; + memcpy(&x, p, sizeof(x)); + return ntohs(x); +} +static inline uint32_t ntoh_l_force_align(void *p) +{ + uint32_t x; + memcpy(&x, p, sizeof(x)); + return ntohl(x); +} +#define ntoh_s(var) ntoh_s_force_align(&(var)) +#define ntoh_l(var) ntoh_l_force_align(&(var)) +#endif + +static struct cache_entry *cache_entry_from_ondisk(struct ondisk_cache_entry *ondisk, + unsigned int flags, + const char *name, + size_t len) +{ + struct cache_entry *ce = xmalloc(cache_entry_size(len)); + + ce->ce_ctime.sec = ntoh_l(ondisk->ctime.sec); + ce->ce_mtime.sec = ntoh_l(ondisk->mtime.sec); + ce->ce_ctime.nsec = ntoh_l(ondisk->ctime.nsec); + ce->ce_mtime.nsec = ntoh_l(ondisk->mtime.nsec); + ce->ce_dev = ntoh_l(ondisk->dev); + ce->ce_ino = ntoh_l(ondisk->ino); + ce->ce_mode = ntoh_l(ondisk->mode); + ce->ce_uid = ntoh_l(ondisk->uid); + ce->ce_gid = ntoh_l(ondisk->gid); + ce->ce_size = ntoh_l(ondisk->size); + ce->ce_flags = flags; + hashcpy(ce->sha1, ondisk->sha1); + memcpy(ce->name, name, len); + ce->name[len] = '\0'; + return ce; +} + +/* + * Adjacent cache entries tend to share the leading paths, so it makes + * sense to only store the differences in later entries. In the v4 + * on-disk format of the index, each on-disk cache entry stores the + * number of bytes to be stripped from the end of the previous name, + * and the bytes to append to the result, to come up with its name. + */ +static unsigned long expand_name_field(struct strbuf *name, const char *cp_) +{ + const unsigned char *ep, *cp = (const unsigned char *)cp_; + size_t len = decode_varint(&cp); + + if (name->len < len) + die("malformed name field in the index"); + strbuf_remove(name, name->len - len, len); + for (ep = cp; *ep; ep++) + ; /* find the end */ + strbuf_add(name, cp, ep - cp); + return (const char *)ep + 1 - cp_; +} + +static struct cache_entry *create_from_disk(struct ondisk_cache_entry *ondisk, + unsigned long *ent_size, + struct strbuf *previous_name) { struct cache_entry *ce; size_t len; @@ -1229,14 +1357,14 @@ static struct cache_entry *create_from_disk(struct ondisk_cache_entry *ondisk) unsigned int flags; /* On-disk flags are just 16 bits */ - flags = ntohs(ondisk->flags); + flags = ntoh_s(ondisk->flags); len = flags & CE_NAMEMASK; if (flags & CE_EXTENDED) { struct ondisk_cache_entry_extended *ondisk2; int extended_flags; ondisk2 = (struct ondisk_cache_entry_extended *)ondisk; - extended_flags = ntohs(ondisk2->flags2) << 16; + extended_flags = ntoh_s(ondisk2->flags2) << 16; /* We do not yet understand any bit out of CE_EXTENDED_FLAGS */ if (extended_flags & ~CE_EXTENDED_FLAGS) die("Unknown index entry format %08x", extended_flags); @@ -1246,27 +1374,22 @@ static struct cache_entry *create_from_disk(struct ondisk_cache_entry *ondisk) else name = ondisk->name; - if (len == CE_NAMEMASK) - len = strlen(name); - - ce = xmalloc(cache_entry_size(len)); - - ce->ce_ctime.sec = ntohl(ondisk->ctime.sec); - ce->ce_mtime.sec = ntohl(ondisk->mtime.sec); - ce->ce_ctime.nsec = ntohl(ondisk->ctime.nsec); - ce->ce_mtime.nsec = ntohl(ondisk->mtime.nsec); - ce->ce_dev = ntohl(ondisk->dev); - ce->ce_ino = ntohl(ondisk->ino); - ce->ce_mode = ntohl(ondisk->mode); - ce->ce_uid = ntohl(ondisk->uid); - ce->ce_gid = ntohl(ondisk->gid); - ce->ce_size = ntohl(ondisk->size); - ce->ce_flags = flags; - - hashcpy(ce->sha1, ondisk->sha1); - - memcpy(ce->name, name, len); - ce->name[len] = '\0'; + if (!previous_name) { + /* v3 and earlier */ + if (len == CE_NAMEMASK) + len = strlen(name); + ce = cache_entry_from_ondisk(ondisk, flags, name, len); + + *ent_size = ondisk_ce_size(ce); + } else { + unsigned long consumed; + consumed = expand_name_field(previous_name, name); + ce = cache_entry_from_ondisk(ondisk, flags, + previous_name->buf, + previous_name->len); + + *ent_size = (name - ((char *)ondisk)) + consumed; + } return ce; } @@ -1279,6 +1402,7 @@ int read_index_from(struct index_state *istate, const char *path) struct cache_header *hdr; void *mmap; size_t mmap_size; + struct strbuf previous_name_buf = STRBUF_INIT, *previous_name; errno = EBUSY; if (istate->initialized) @@ -1311,22 +1435,30 @@ int read_index_from(struct index_state *istate, const char *path) if (verify_hdr(hdr, mmap_size) < 0) goto unmap; + istate->version = ntohl(hdr->hdr_version); istate->cache_nr = ntohl(hdr->hdr_entries); istate->cache_alloc = alloc_nr(istate->cache_nr); istate->cache = xcalloc(istate->cache_alloc, sizeof(struct cache_entry *)); istate->initialized = 1; + if (istate->version == 4) + previous_name = &previous_name_buf; + else + previous_name = NULL; + src_offset = sizeof(*hdr); for (i = 0; i < istate->cache_nr; i++) { struct ondisk_cache_entry *disk_ce; struct cache_entry *ce; + unsigned long consumed; disk_ce = (struct ondisk_cache_entry *)((char *)mmap + src_offset); - ce = create_from_disk(disk_ce); + ce = create_from_disk(disk_ce, &consumed, previous_name); set_index_entry(istate, i, ce); - src_offset += ondisk_ce_size(ce); + src_offset += consumed; } + strbuf_release(&previous_name_buf); istate->timestamp.sec = st.st_mtime; istate->timestamp.nsec = ST_MTIME_NSEC(st); @@ -1510,13 +1642,10 @@ static void ce_smudge_racily_clean_entry(struct cache_entry *ce) } } -static int ce_write_entry(git_SHA_CTX *c, int fd, struct cache_entry *ce) +/* Copy miscellaneous fields but not the name */ +static char *copy_cache_entry_to_ondisk(struct ondisk_cache_entry *ondisk, + struct cache_entry *ce) { - int size = ondisk_ce_size(ce); - struct ondisk_cache_entry *ondisk = xcalloc(1, size); - char *name; - int result; - ondisk->ctime.sec = htonl(ce->ce_ctime.sec); ondisk->mtime.sec = htonl(ce->ce_mtime.sec); ondisk->ctime.nsec = htonl(ce->ce_ctime.nsec); @@ -1533,11 +1662,52 @@ static int ce_write_entry(git_SHA_CTX *c, int fd, struct cache_entry *ce) struct ondisk_cache_entry_extended *ondisk2; ondisk2 = (struct ondisk_cache_entry_extended *)ondisk; ondisk2->flags2 = htons((ce->ce_flags & CE_EXTENDED_FLAGS) >> 16); - name = ondisk2->name; + return ondisk2->name; + } + else { + return ondisk->name; + } +} + +static int ce_write_entry(git_SHA_CTX *c, int fd, struct cache_entry *ce, + struct strbuf *previous_name) +{ + int size; + struct ondisk_cache_entry *ondisk; + char *name; + int result; + + if (!previous_name) { + size = ondisk_ce_size(ce); + ondisk = xcalloc(1, size); + name = copy_cache_entry_to_ondisk(ondisk, ce); + memcpy(name, ce->name, ce_namelen(ce)); + } else { + int common, to_remove, prefix_size; + unsigned char to_remove_vi[16]; + for (common = 0; + (ce->name[common] && + common < previous_name->len && + ce->name[common] == previous_name->buf[common]); + common++) + ; /* still matching */ + to_remove = previous_name->len - common; + prefix_size = encode_varint(to_remove, to_remove_vi); + + if (ce->ce_flags & CE_EXTENDED) + size = offsetof(struct ondisk_cache_entry_extended, name); + else + size = offsetof(struct ondisk_cache_entry, name); + size += prefix_size + (ce_namelen(ce) - common + 1); + + ondisk = xcalloc(1, size); + name = copy_cache_entry_to_ondisk(ondisk, ce); + memcpy(name, to_remove_vi, prefix_size); + memcpy(name + prefix_size, ce->name + common, ce_namelen(ce) - common); + + strbuf_splice(previous_name, common, to_remove, + ce->name + common, ce_namelen(ce) - common); } - else - name = ondisk->name; - memcpy(name, ce->name, ce_namelen(ce)); result = ce_write(c, fd, ondisk, size); free(ondisk); @@ -1573,10 +1743,11 @@ int write_index(struct index_state *istate, int newfd) { git_SHA_CTX c; struct cache_header hdr; - int i, err, removed, extended; + int i, err, removed, extended, hdr_version; struct cache_entry **cache = istate->cache; int entries = istate->cache_nr; struct stat st; + struct strbuf previous_name_buf = STRBUF_INIT, *previous_name; for (i = removed = extended = 0; i < entries; i++) { if (cache[i]->ce_flags & CE_REMOVE) @@ -1590,24 +1761,34 @@ int write_index(struct index_state *istate, int newfd) } } + if (!istate->version) + istate->version = INDEX_FORMAT_DEFAULT; + + /* demote version 3 to version 2 when the latter suffices */ + if (istate->version == 3 || istate->version == 2) + istate->version = extended ? 3 : 2; + + hdr_version = istate->version; + hdr.hdr_signature = htonl(CACHE_SIGNATURE); - /* for extended format, increase version so older git won't try to read it */ - hdr.hdr_version = htonl(extended ? 3 : 2); + hdr.hdr_version = htonl(hdr_version); hdr.hdr_entries = htonl(entries - removed); git_SHA1_Init(&c); if (ce_write(&c, newfd, &hdr, sizeof(hdr)) < 0) return -1; + previous_name = (hdr_version == 4) ? &previous_name_buf : NULL; for (i = 0; i < entries; i++) { struct cache_entry *ce = cache[i]; if (ce->ce_flags & CE_REMOVE) continue; if (!ce_uptodate(ce) && is_racy_timestamp(istate, ce)) ce_smudge_racily_clean_entry(ce); - if (ce_write_entry(&c, newfd, ce) < 0) + if (ce_write_entry(&c, newfd, ce, previous_name) < 0) return -1; } + strbuf_release(&previous_name_buf); /* Write extension data here */ if (istate->cache_tree) { @@ -1126,6 +1126,7 @@ static int warn_if_dangling_symref(const char *refname, const unsigned char *sha return 0; fprintf(d->fp, d->msg_fmt, refname); + fputc('\n', d->fp); return 0; } @@ -464,3 +464,36 @@ void strbuf_addstr_urlencode(struct strbuf *sb, const char *s, { strbuf_add_urlencode(sb, s, strlen(s), reserved); } + +void strbuf_addf_ln(struct strbuf *sb, const char *fmt, ...) +{ + va_list ap; + va_start(ap, fmt); + strbuf_vaddf(sb, fmt, ap); + va_end(ap); + strbuf_addch(sb, '\n'); +} + +int printf_ln(const char *fmt, ...) +{ + int ret; + va_list ap; + va_start(ap, fmt); + ret = vprintf(fmt, ap); + va_end(ap); + if (ret < 0 || putchar('\n') == EOF) + return -1; + return ret + 1; +} + +int fprintf_ln(FILE *fp, const char *fmt, ...) +{ + int ret; + va_list ap; + va_start(ap, fmt); + ret = vfprintf(fp, fmt, ap); + va_end(ap); + if (ret < 0 || putc('\n', fp) == EOF) + return -1; + return ret + 1; +} @@ -99,6 +99,8 @@ __attribute__((format (printf,2,3))) extern void strbuf_addf(struct strbuf *sb, const char *fmt, ...); __attribute__((format (printf,2,0))) extern void strbuf_vaddf(struct strbuf *sb, const char *fmt, va_list ap); +__attribute__((format (printf,2,3))) +extern void strbuf_addf_ln(struct strbuf *sb, const char *fmt, ...); extern void strbuf_add_lines(struct strbuf *sb, const char *prefix, const char *buf, size_t size); @@ -129,4 +131,9 @@ extern void strbuf_add_urlencode(struct strbuf *, const char *, size_t, extern void strbuf_addstr_urlencode(struct strbuf *, const char *, int reserved); +__attribute__((format (printf,1,2))) +extern int printf_ln(const char *fmt, ...); +__attribute__((format (printf,2,3))) +extern int fprintf_ln(FILE *fp, const char *fmt, ...); + #endif /* STRBUF_H */ diff --git a/t/t4052-stat-output.sh b/t/t4052-stat-output.sh index 328aa8f..ddd9497 100755 --- a/t/t4052-stat-output.sh +++ b/t/t4052-stat-output.sh @@ -82,11 +82,15 @@ test_expect_success 'preparation for big change tests' ' cat >expect80 <<'EOF' abcd | 1000 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ EOF - +cat >expect80-graph <<'EOF' +| abcd | 1000 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +EOF cat >expect200 <<'EOF' abcd | 1000 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ EOF - +cat >expect200-graph <<'EOF' +| abcd | 1000 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +EOF while read verb expect cmd args do test_expect_success "$cmd $verb COLUMNS (big change)" ' @@ -94,6 +98,14 @@ do grep " | " output >actual && test_cmp "$expect" actual ' + + test "$cmd" != diff || continue + + test_expect_success "$cmd --graph $verb COLUMNS (big change)" ' + COLUMNS=200 git $cmd $args --graph >output + grep " | " output >actual && + test_cmp "$expect-graph" actual + ' done <<\EOF ignores expect80 format-patch -1 --stdout respects expect200 diff HEAD^ HEAD --stat @@ -104,7 +116,9 @@ EOF cat >expect40 <<'EOF' abcd | 1000 ++++++++++++++++++++++++++ EOF - +cat >expect40-graph <<'EOF' +| abcd | 1000 ++++++++++++++++++++++++ +EOF while read verb expect cmd args do test_expect_success "$cmd $verb not enough COLUMNS (big change)" ' @@ -113,11 +127,41 @@ do test_cmp "$expect" actual ' + test "$cmd" != diff || continue + + test_expect_success "$cmd --graph $verb not enough COLUMNS (big change)" ' + COLUMNS=40 git $cmd $args --graph >output + grep " | " output >actual && + test_cmp "$expect-graph" actual + ' +done <<\EOF +ignores expect80 format-patch -1 --stdout +respects expect40 diff HEAD^ HEAD --stat +respects expect40 show --stat +respects expect40 log -1 --stat +EOF + +cat >expect40 <<'EOF' + abcd | 1000 ++++++++++++++++++++++++++ +EOF +cat >expect40-graph <<'EOF' +| abcd | 1000 ++++++++++++++++++++++++++ +EOF +while read verb expect cmd args +do test_expect_success "$cmd $verb statGraphWidth config" ' git -c diff.statGraphWidth=26 $cmd $args >output grep " | " output >actual && test_cmp "$expect" actual ' + + test "$cmd" != diff || continue + + test_expect_success "$cmd --graph $verb statGraphWidth config" ' + git -c diff.statGraphWidth=26 $cmd $args --graph >output + grep " | " output >actual && + test_cmp "$expect-graph" actual + ' done <<\EOF ignores expect80 format-patch -1 --stdout respects expect40 diff HEAD^ HEAD --stat @@ -129,6 +173,9 @@ EOF cat >expect <<'EOF' abcd | 1000 ++++++++++++++++++++++++++ EOF +cat >expect-graph <<'EOF' +| abcd | 1000 ++++++++++++++++++++++++++ +EOF while read cmd args do test_expect_success "$cmd --stat=width with big change" ' @@ -143,11 +190,25 @@ do test_cmp expect actual ' - test_expect_success "$cmd --stat-graph--width with big change" ' + test_expect_success "$cmd --stat-graph-width with big change" ' git $cmd $args --stat-graph-width=26 >output grep " | " output >actual && test_cmp expect actual ' + + test "$cmd" != diff || continue + + test_expect_success "$cmd --stat-width=width --graph with big change" ' + git $cmd $args --stat-width=40 --graph >output + grep " | " output >actual && + test_cmp expect-graph actual + ' + + test_expect_success "$cmd --stat-graph-width --graph with big change" ' + git $cmd $args --stat-graph-width=26 --graph >output + grep " | " output >actual && + test_cmp expect-graph actual + ' done <<\EOF format-patch -1 --stdout diff HEAD^ HEAD --stat @@ -164,6 +225,9 @@ test_expect_success 'preparation for long filename tests' ' cat >expect <<'EOF' ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1000 ++++++++++++ EOF +cat >expect-graph <<'EOF' +| ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1000 ++++++++++++ +EOF while read cmd args do test_expect_success "$cmd --stat=width with big change is more balanced" ' @@ -171,6 +235,14 @@ do grep " | " output >actual && test_cmp expect actual ' + + test "$cmd" != diff || continue + + test_expect_success "$cmd --stat=width --graph with big change is balanced" ' + git $cmd $args --stat-width=60 --graph >output && + grep " | " output >actual && + test_cmp expect-graph actual + ' done <<\EOF format-patch -1 --stdout diff HEAD^ HEAD --stat @@ -181,9 +253,15 @@ EOF cat >expect80 <<'EOF' ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1000 ++++++++++++++++++++ EOF +cat >expect80-graph <<'EOF' +| ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1000 ++++++++++++++++++++ +EOF cat >expect200 <<'EOF' aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1000 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ EOF +cat >expect200-graph <<'EOF' +| aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1000 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +EOF while read verb expect cmd args do test_expect_success "$cmd $verb COLUMNS (long filename)" ' @@ -191,6 +269,14 @@ do grep " | " output >actual && test_cmp "$expect" actual ' + + test "$cmd" != diff || continue + + test_expect_success "$cmd --graph $verb COLUMNS (long filename)" ' + COLUMNS=200 git $cmd $args --graph >output + grep " | " output >actual && + test_cmp "$expect-graph" actual + ' done <<\EOF ignores expect80 format-patch -1 --stdout respects expect200 diff HEAD^ HEAD --stat @@ -198,6 +284,36 @@ respects expect200 show --stat respects expect200 log -1 --stat EOF +cat >expect1 <<'EOF' + ...aaaaaaa | 1000 ++++++ +EOF +cat >expect1-graph <<'EOF' +| ...aaaaaaa | 1000 ++++++ +EOF +while read verb expect cmd args +do + test_expect_success COLUMNS_CAN_BE_1 \ + "$cmd $verb prefix greater than COLUMNS (big change)" ' + COLUMNS=1 git $cmd $args >output + grep " | " output >actual && + test_cmp "$expect" actual + ' + + test "$cmd" != diff || continue + + test_expect_success COLUMNS_CAN_BE_1 \ + "$cmd --graph $verb prefix greater than COLUMNS (big change)" ' + COLUMNS=1 git $cmd $args --graph >output + grep " | " output >actual && + test_cmp "$expect-graph" actual + ' +done <<\EOF +ignores expect80 format-patch -1 --stdout +respects expect1 diff HEAD^ HEAD --stat +respects expect1 show --stat +respects expect1 log -1 --stat +EOF + cat >expect <<'EOF' abcd | 1000 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ EOF diff --git a/t/t5528-push-default.sh b/t/t5528-push-default.sh index c334c51..4736da8 100755 --- a/t/t5528-push-default.sh +++ b/t/t5528-push-default.sh @@ -13,16 +13,36 @@ test_expect_success 'setup bare remotes' ' git push parent2 HEAD ' +# $1 = local revision +# $2 = remote revision (tested to be equal to the local one) +check_pushed_commit () { + git log -1 --format='%h %s' "$1" >expect && + git --git-dir=repo1 log -1 --format='%h %s' "$2" >actual && + test_cmp expect actual +} + +# $1 = push.default value +# $2 = expected target branch for the push +test_push_success () { + git -c push.default="$1" push && + check_pushed_commit HEAD "$2" +} + +# $1 = push.default value +# check that push fails and does not modify any remote branch +test_push_failure () { + git --git-dir=repo1 log --no-walk --format='%h %s' --all >expect && + test_must_fail git -c push.default="$1" push && + git --git-dir=repo1 log --no-walk --format='%h %s' --all >actual && + test_cmp expect actual +} + test_expect_success '"upstream" pushes to configured upstream' ' git checkout master && test_config branch.master.remote parent1 && test_config branch.master.merge refs/heads/foo && - test_config push.default upstream && test_commit two && - git push && - echo two >expect && - git --git-dir=repo1 log -1 --format=%s foo >actual && - test_cmp expect actual + test_push_success upstream foo ' test_expect_success '"upstream" does not push on unconfigured remote' ' @@ -30,7 +50,7 @@ test_expect_success '"upstream" does not push on unconfigured remote' ' test_unconfig branch.master.remote && test_config push.default upstream && test_commit three && - test_must_fail git push + test_push_failure upstream ' test_expect_success '"upstream" does not push on unconfigured branch' ' @@ -39,7 +59,7 @@ test_expect_success '"upstream" does not push on unconfigured branch' ' test_unconfig branch.master.merge && test_config push.default upstream test_commit four && - test_must_fail git push + test_push_failure upstream ' test_expect_success '"upstream" does not push when remotes do not match' ' @@ -51,4 +71,48 @@ test_expect_success '"upstream" does not push when remotes do not match' ' test_must_fail git push parent2 ' +test_expect_success 'push from/to new branch with upstream, matching and simple' ' + git checkout -b new-branch && + test_push_failure simple && + test_push_failure matching && + test_push_failure upstream +' + +test_expect_success 'push from/to new branch with current creates remote branch' ' + test_config branch.new-branch.remote repo1 && + git checkout new-branch && + test_push_success current new-branch +' + +test_expect_success 'push to existing branch, with no upstream configured' ' + test_config branch.master.remote repo1 && + git checkout master && + test_push_failure simple && + test_push_failure upstream +' + +test_expect_success 'push to existing branch, upstream configured with same name' ' + test_config branch.master.remote repo1 && + test_config branch.master.merge refs/heads/master && + git checkout master && + test_commit six && + test_push_success upstream master && + test_commit seven && + test_push_success simple master +' + +test_expect_success 'push to existing branch, upstream configured with different name' ' + test_config branch.master.remote repo1 && + test_config branch.master.merge refs/heads/other-name && + git checkout master && + test_commit eight && + test_push_success upstream other-name && + test_commit nine && + test_push_failure simple && + git --git-dir=repo1 log -1 --format="%h %s" "other-name" >expect-other-name && + test_push_success current master && + git --git-dir=repo1 log -1 --format="%h %s" "other-name" >actual-other-name && + test_cmp expect-other-name actual-other-name +' + test_done diff --git a/t/t5570-git-daemon.sh b/t/t5570-git-daemon.sh index 7cbc999..a3a4e47 100755 --- a/t/t5570-git-daemon.sh +++ b/t/t5570-git-daemon.sh @@ -103,14 +103,12 @@ test_remote_error() esac done - if test $# -ne 3 - then - error "invalid number of arguments" - fi - + msg=$1 + shift cmd=$1 - repo=$2 - msg=$3 + shift + repo=$1 + shift || error "invalid number of arguments" if test -x "$GIT_DAEMON_DOCUMENT_ROOT_PATH/$repo" then @@ -122,7 +120,7 @@ test_remote_error() fi fi - test_must_fail git "$cmd" "$GIT_DAEMON_URL/$repo" 2>output && + test_must_fail git "$cmd" "$GIT_DAEMON_URL/$repo" "$@" 2>output && echo "fatal: remote error: $msg: /$repo" >expect && test_cmp expect output ret=$? @@ -131,18 +129,18 @@ test_remote_error() } msg="access denied or repository not exported" -test_expect_success 'clone non-existent' "test_remote_error clone nowhere.git '$msg'" -test_expect_success 'push disabled' "test_remote_error push repo.git '$msg'" -test_expect_success 'read access denied' "test_remote_error -x fetch repo.git '$msg'" -test_expect_success 'not exported' "test_remote_error -n fetch repo.git '$msg'" +test_expect_success 'clone non-existent' "test_remote_error '$msg' clone nowhere.git " +test_expect_success 'push disabled' "test_remote_error '$msg' push repo.git master" +test_expect_success 'read access denied' "test_remote_error -x '$msg' fetch repo.git " +test_expect_success 'not exported' "test_remote_error -n '$msg' fetch repo.git " stop_git_daemon start_git_daemon --informative-errors -test_expect_success 'clone non-existent' "test_remote_error clone nowhere.git 'no such repository'" -test_expect_success 'push disabled' "test_remote_error push repo.git 'service not enabled'" -test_expect_success 'read access denied' "test_remote_error -x fetch repo.git 'no such repository'" -test_expect_success 'not exported' "test_remote_error -n fetch repo.git 'repository not exported'" +test_expect_success 'clone non-existent' "test_remote_error 'no such repository' clone nowhere.git " +test_expect_success 'push disabled' "test_remote_error 'service not enabled' push repo.git master" +test_expect_success 'read access denied' "test_remote_error -x 'no such repository' fetch repo.git " +test_expect_success 'not exported' "test_remote_error -n 'repository not exported' fetch repo.git " stop_git_daemon test_done diff --git a/t/test-lib.sh b/t/test-lib.sh index b7d7100..9e2b711 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -615,6 +615,7 @@ case $(uname -s) in ;; esac +( COLUMNS=1 && test $COLUMNS = 1 ) && test_set_prereq COLUMNS_CAN_BE_1 test -z "$NO_PERL" && test_set_prereq PERL test -z "$NO_PYTHON" && test_set_prereq PYTHON test -n "$USE_LIBPCRE" && test_set_prereq LIBPCRE diff --git a/test-date.c b/test-date.c index 6bcd5b0..10afaab 100644 --- a/test-date.c +++ b/test-date.c @@ -7,13 +7,14 @@ static const char *usage_msg = "\n" static void show_dates(char **argv, struct timeval *now) { - char buf[128]; + struct strbuf buf = STRBUF_INIT; for (; *argv; argv++) { time_t t = atoi(*argv); - show_date_relative(t, 0, now, buf, sizeof(buf)); - printf("%s -> %s\n", *argv, buf); + show_date_relative(t, 0, now, &buf); + printf("%s -> %s\n", *argv, buf.buf); } + strbuf_release(&buf); } static void parse_dates(char **argv, struct timeval *now) diff --git a/unpack-trees.c b/unpack-trees.c index 36523da..1d7393d 100644 --- a/unpack-trees.c +++ b/unpack-trees.c @@ -1027,6 +1027,7 @@ int unpack_trees(unsigned len, struct tree_desc *t, struct unpack_trees_options o->result.initialized = 1; o->result.timestamp.sec = o->src_index->timestamp.sec; o->result.timestamp.nsec = o->src_index->timestamp.nsec; + o->result.version = o->src_index->version; o->merge_size = len; mark_all_ce_unused(o->src_index); diff --git a/varint.c b/varint.c new file mode 100644 index 0000000..4ed7729 --- /dev/null +++ b/varint.c @@ -0,0 +1,29 @@ +#include "varint.h" + +uintmax_t decode_varint(const unsigned char **bufp) +{ + const unsigned char *buf = *bufp; + unsigned char c = *buf++; + uintmax_t val = c & 127; + while (c & 128) { + val += 1; + if (!val || MSB(val, 7)) + return 0; /* overflow */ + c = *buf++; + val = (val << 7) + (c & 127); + } + *bufp = buf; + return val; +} + +int encode_varint(uintmax_t value, unsigned char *buf) +{ + unsigned char varint[16]; + unsigned pos = sizeof(varint) - 1; + varint[pos] = value & 127; + while (value >>= 7) + varint[--pos] = 128 | (--value & 127); + if (buf) + memcpy(buf, varint + pos, sizeof(varint) - pos); + return sizeof(varint) - pos; +} diff --git a/varint.h b/varint.h new file mode 100644 index 0000000..0321195 --- /dev/null +++ b/varint.h @@ -0,0 +1,9 @@ +#ifndef VARINT_H +#define VARINT_H + +#include "git-compat-util.h" + +extern int encode_varint(uintmax_t, unsigned char *); +extern uintmax_t decode_varint(const unsigned char **); + +#endif /* VARINT_H */ |