summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/config/advice.txt3
-rw-r--r--Documentation/config/submodule.txt37
-rw-r--r--Documentation/git-branch.txt19
-rw-r--r--advice.c1
-rw-r--r--advice.h1
-rw-r--r--branch.c141
-rw-r--r--branch.h29
-rw-r--r--builtin/branch.c44
-rw-r--r--builtin/submodule--helper.c38
-rw-r--r--submodule-config.c61
-rw-r--r--submodule-config.h34
-rw-r--r--submodule.c11
-rw-r--r--submodule.h3
-rwxr-xr-xt/t3207-branch-submodule.sh292
14 files changed, 694 insertions, 20 deletions
diff --git a/Documentation/config/advice.txt b/Documentation/config/advice.txt
index 063eec2..adee26f 100644
--- a/Documentation/config/advice.txt
+++ b/Documentation/config/advice.txt
@@ -116,6 +116,9 @@ advice.*::
submoduleAlternateErrorStrategyDie::
Advice shown when a submodule.alternateErrorStrategy option
configured to "die" causes a fatal error.
+ submodulesNotUpdated::
+ Advice shown when a user runs a submodule command that fails
+ because `git submodule update --init` was not run.
addIgnoredFile::
Advice shown if a user attempts to add an ignored file to
the index.
diff --git a/Documentation/config/submodule.txt b/Documentation/config/submodule.txt
index ee454f8..6490527 100644
--- a/Documentation/config/submodule.txt
+++ b/Documentation/config/submodule.txt
@@ -59,18 +59,33 @@ submodule.active::
submodule.recurse::
A boolean indicating if commands should enable the `--recurse-submodules`
- option by default.
- Applies to all commands that support this option
- (`checkout`, `fetch`, `grep`, `pull`, `push`, `read-tree`, `reset`,
- `restore` and `switch`) except `clone` and `ls-files`.
+ option by default. Defaults to false.
++
+When set to true, it can be deactivated via the
+`--no-recurse-submodules` option. Note that some Git commands
+lacking this option may call some of the above commands affected by
+`submodule.recurse`; for instance `git remote update` will call
+`git fetch` but does not have a `--no-recurse-submodules` option.
+For these commands a workaround is to temporarily change the
+configuration value by using `git -c submodule.recurse=0`.
++
+The following list shows the commands that accept
+`--recurse-submodules` and whether they are supported by this
+setting.
+
+* `checkout`, `fetch`, `grep`, `pull`, `push`, `read-tree`,
+`reset`, `restore` and `switch` are always supported.
+* `clone` and `ls-files` are not supported.
+* `branch` is supported only if `submodule.propagateBranches` is
+enabled
+
+submodule.propagateBranches::
+ [EXPERIMENTAL] A boolean that enables branching support when
+ using `--recurse-submodules` or `submodule.recurse=true`.
+ Enabling this will allow certain commands to accept
+ `--recurse-submodules` and certain commands that already accept
+ `--recurse-submodules` will now consider branches.
Defaults to false.
- When set to true, it can be deactivated via the
- `--no-recurse-submodules` option. Note that some Git commands
- lacking this option may call some of the above commands affected by
- `submodule.recurse`; for instance `git remote update` will call
- `git fetch` but does not have a `--no-recurse-submodules` option.
- For these commands a workaround is to temporarily change the
- configuration value by using `git -c submodule.recurse=0`.
submodule.fetchJobs::
Specifies how many submodules are fetched/cloned at the same time.
diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt
index 731e340..c8b4f9c 100644
--- a/Documentation/git-branch.txt
+++ b/Documentation/git-branch.txt
@@ -16,7 +16,8 @@ SYNOPSIS
[--points-at <object>] [--format=<format>]
[(-r | --remotes) | (-a | --all)]
[--list] [<pattern>...]
-'git branch' [--track[=(direct|inherit)] | --no-track] [-f] <branchname> [<start-point>]
+'git branch' [--track[=(direct|inherit)] | --no-track] [-f]
+ [--recurse-submodules] <branchname> [<start-point>]
'git branch' (--set-upstream-to=<upstream> | -u <upstream>) [<branchname>]
'git branch' --unset-upstream [<branchname>]
'git branch' (-m | -M) [<oldbranch>] <newbranch>
@@ -235,6 +236,22 @@ how the `branch.<name>.remote` and `branch.<name>.merge` options are used.
Do not set up "upstream" configuration, even if the
branch.autoSetupMerge configuration variable is set.
+--recurse-submodules::
+ THIS OPTION IS EXPERIMENTAL! Causes the current command to
+ recurse into submodules if `submodule.propagateBranches` is
+ enabled. See `submodule.propagateBranches` in
+ linkgit:git-config[1]. Currently, only branch creation is
+ supported.
++
+When used in branch creation, a new branch <branchname> will be created
+in the superproject and all of the submodules in the superproject's
+<start-point>. In submodules, the branch will point to the submodule
+commit in the superproject's <start-point> but the branch's tracking
+information will be set up based on the submodule's branches and remotes
+e.g. `git branch --recurse-submodules topic origin/main` will create the
+submodule branch "topic" that points to the submodule commit in the
+superproject's "origin/main", but tracks the submodule's "origin/main".
+
--set-upstream::
As this option had confusing syntax, it is no longer supported.
Please use `--track` or `--set-upstream-to` instead.
diff --git a/advice.c b/advice.c
index 1dfc91d..e00d302 100644
--- a/advice.c
+++ b/advice.c
@@ -70,6 +70,7 @@ static struct {
[ADVICE_STATUS_HINTS] = { "statusHints", 1 },
[ADVICE_STATUS_U_OPTION] = { "statusUoption", 1 },
[ADVICE_SUBMODULE_ALTERNATE_ERROR_STRATEGY_DIE] = { "submoduleAlternateErrorStrategyDie", 1 },
+ [ADVICE_SUBMODULES_NOT_UPDATED] = { "submodulesNotUpdated", 1 },
[ADVICE_UPDATE_SPARSE_PATH] = { "updateSparsePath", 1 },
[ADVICE_WAITING_FOR_EDITOR] = { "waitingForEditor", 1 },
};
diff --git a/advice.h b/advice.h
index 601265f..a7521d6 100644
--- a/advice.h
+++ b/advice.h
@@ -44,6 +44,7 @@ struct string_list;
ADVICE_STATUS_HINTS,
ADVICE_STATUS_U_OPTION,
ADVICE_SUBMODULE_ALTERNATE_ERROR_STRATEGY_DIE,
+ ADVICE_SUBMODULES_NOT_UPDATED,
ADVICE_UPDATE_SPARSE_PATH,
ADVICE_WAITING_FOR_EDITOR,
ADVICE_SKIPPED_CHERRY_PICKS,
diff --git a/branch.c b/branch.c
index 02d46a6..70026b3 100644
--- a/branch.c
+++ b/branch.c
@@ -8,6 +8,8 @@
#include "sequencer.h"
#include "commit.h"
#include "worktree.h"
+#include "submodule-config.h"
+#include "run-command.h"
struct tracking {
struct refspec_item spec;
@@ -483,6 +485,145 @@ void dwim_and_setup_tracking(struct repository *r, const char *new_ref,
setup_tracking(new_ref, real_orig_ref, track, quiet);
}
+/**
+ * Creates a branch in a submodule by calling
+ * create_branches_recursively() in a child process. The child process
+ * is necessary because install_branch_config_multiple_remotes() (which
+ * is called by setup_tracking()) does not support writing configs to
+ * submodules.
+ */
+static int submodule_create_branch(struct repository *r,
+ const struct submodule *submodule,
+ const char *name, const char *start_oid,
+ const char *tracking_name, int force,
+ int reflog, int quiet,
+ enum branch_track track, int dry_run)
+{
+ int ret = 0;
+ struct child_process child = CHILD_PROCESS_INIT;
+ struct strbuf child_err = STRBUF_INIT;
+ struct strbuf out_buf = STRBUF_INIT;
+ char *out_prefix = xstrfmt("submodule '%s': ", submodule->name);
+ child.git_cmd = 1;
+ child.err = -1;
+ child.stdout_to_stderr = 1;
+
+ prepare_other_repo_env(&child.env_array, r->gitdir);
+ /*
+ * submodule_create_branch() is indirectly invoked by "git
+ * branch", but we cannot invoke "git branch" in the child
+ * process. "git branch" accepts a branch name and start point,
+ * where the start point is assumed to provide both the OID
+ * (start_oid) and the branch to use for tracking
+ * (tracking_name). But when recursing through submodules,
+ * start_oid and tracking name need to be specified separately
+ * (see create_branches_recursively()).
+ */
+ strvec_pushl(&child.args, "submodule--helper", "create-branch", NULL);
+ if (dry_run)
+ strvec_push(&child.args, "--dry-run");
+ if (force)
+ strvec_push(&child.args, "--force");
+ if (quiet)
+ strvec_push(&child.args, "--quiet");
+ if (reflog)
+ strvec_push(&child.args, "--create-reflog");
+ if (track == BRANCH_TRACK_ALWAYS || track == BRANCH_TRACK_EXPLICIT)
+ strvec_push(&child.args, "--track");
+
+ strvec_pushl(&child.args, name, start_oid, tracking_name, NULL);
+
+ if ((ret = start_command(&child)))
+ return ret;
+ ret = finish_command(&child);
+ strbuf_read(&child_err, child.err, 0);
+ strbuf_add_lines(&out_buf, out_prefix, child_err.buf, child_err.len);
+
+ if (ret)
+ fprintf(stderr, "%s", out_buf.buf);
+ else
+ printf("%s", out_buf.buf);
+
+ strbuf_release(&child_err);
+ strbuf_release(&out_buf);
+ return ret;
+}
+
+void create_branches_recursively(struct repository *r, const char *name,
+ const char *start_commitish,
+ const char *tracking_name, int force,
+ int reflog, int quiet, enum branch_track track,
+ int dry_run)
+{
+ int i = 0;
+ char *branch_point = NULL;
+ struct object_id super_oid;
+ struct submodule_entry_list submodule_entry_list;
+
+ /* Perform dwim on start_commitish to get super_oid and branch_point. */
+ dwim_branch_start(r, start_commitish, BRANCH_TRACK_NEVER,
+ &branch_point, &super_oid);
+
+ /*
+ * If we were not given an explicit name to track, then assume we are at
+ * the top level and, just like the non-recursive case, the tracking
+ * name is the branch point.
+ */
+ if (!tracking_name)
+ tracking_name = branch_point;
+
+ submodules_of_tree(r, &super_oid, &submodule_entry_list);
+ /*
+ * Before creating any branches, first check that the branch can
+ * be created in every submodule.
+ */
+ for (i = 0; i < submodule_entry_list.entry_nr; i++) {
+ if (submodule_entry_list.entries[i].repo == NULL) {
+ if (advice_enabled(ADVICE_SUBMODULES_NOT_UPDATED))
+ advise(_("You may try updating the submodules using 'git checkout %s && git submodule update --init'"),
+ start_commitish);
+ die(_("submodule '%s': unable to find submodule"),
+ submodule_entry_list.entries[i].submodule->name);
+ }
+
+ if (submodule_create_branch(
+ submodule_entry_list.entries[i].repo,
+ submodule_entry_list.entries[i].submodule, name,
+ oid_to_hex(&submodule_entry_list.entries[i]
+ .name_entry->oid),
+ tracking_name, force, reflog, quiet, track, 1))
+ die(_("submodule '%s': cannot create branch '%s'"),
+ submodule_entry_list.entries[i].submodule->name,
+ name);
+ }
+
+ create_branch(the_repository, name, start_commitish, force, 0, reflog, quiet,
+ BRANCH_TRACK_NEVER, dry_run);
+ if (dry_run)
+ return;
+ /*
+ * NEEDSWORK If tracking was set up in the superproject but not the
+ * submodule, users might expect "git branch --recurse-submodules" to
+ * fail or give a warning, but this is not yet implemented because it is
+ * tedious to determine whether or not tracking was set up in the
+ * superproject.
+ */
+ setup_tracking(name, tracking_name, track, quiet);
+
+ for (i = 0; i < submodule_entry_list.entry_nr; i++) {
+ if (submodule_create_branch(
+ submodule_entry_list.entries[i].repo,
+ submodule_entry_list.entries[i].submodule, name,
+ oid_to_hex(&submodule_entry_list.entries[i]
+ .name_entry->oid),
+ tracking_name, force, reflog, quiet, track, 0))
+ die(_("submodule '%s': cannot create branch '%s'"),
+ submodule_entry_list.entries[i].submodule->name,
+ name);
+ repo_clear(submodule_entry_list.entries[i].repo);
+ }
+}
+
void remove_merge_branch_state(struct repository *r)
{
unlink(git_path_merge_head(r));
diff --git a/branch.h b/branch.h
index 509cfcc..04df2aa5 100644
--- a/branch.h
+++ b/branch.h
@@ -72,6 +72,35 @@ void create_branch(struct repository *r,
int dry_run);
/*
+ * Creates a new branch in a repository and its submodules (and its
+ * submodules, recursively). The parameters are mostly analogous to
+ * those of create_branch() except for start_name, which is represented
+ * by two different parameters:
+ *
+ * - start_commitish is the commit-ish, in repository r, that determines
+ * which commits the branches will point to. The superproject branch
+ * will point to the commit of start_commitish and the submodule
+ * branches will point to the gitlink commit oids in start_commitish's
+ * tree.
+ *
+ * - tracking_name is the name of the ref, in repository r, that will be
+ * used to set up tracking information. This value is propagated to
+ * all submodules, which will evaluate the ref using their own ref
+ * stores. If NULL, this defaults to start_commitish.
+ *
+ * When this function is called on the superproject, start_commitish
+ * can be any user-provided ref and tracking_name can be NULL (similar
+ * to create_branches()). But when recursing through submodules,
+ * start_commitish is the plain gitlink commit oid. Since the oid cannot
+ * be used for tracking information, tracking_name is propagated and
+ * used for tracking instead.
+ */
+void create_branches_recursively(struct repository *r, const char *name,
+ const char *start_commitish,
+ const char *tracking_name, int force,
+ int reflog, int quiet, enum branch_track track,
+ int dry_run);
+/*
* Check if 'name' can be a valid name for a branch; die otherwise.
* Return 1 if the named branch already exists; return 0 otherwise.
* Fill ref with the full refname for the branch.
diff --git a/builtin/branch.c b/builtin/branch.c
index 209b1cc..d9a3ad5 100644
--- a/builtin/branch.c
+++ b/builtin/branch.c
@@ -27,7 +27,8 @@
static const char * const builtin_branch_usage[] = {
N_("git branch [<options>] [-r | -a] [--merged] [--no-merged]"),
- N_("git branch [<options>] [-l] [-f] <branch-name> [<start-point>]"),
+ N_("git branch [<options>] [-f] [--recurse-submodules] <branch-name> [<start-point>]"),
+ N_("git branch [<options>] [-l] [<pattern>...]"),
N_("git branch [<options>] [-r] (-d | -D) <branch-name>..."),
N_("git branch [<options>] (-m | -M) [<old-branch>] <new-branch>"),
N_("git branch [<options>] (-c | -C) [<old-branch>] <new-branch>"),
@@ -38,6 +39,8 @@ static const char * const builtin_branch_usage[] = {
static const char *head;
static struct object_id head_oid;
+static int recurse_submodules = 0;
+static int submodule_propagate_branches = 0;
static int branch_use_color = -1;
static char branch_colors[][COLOR_MAXLEN] = {
@@ -99,6 +102,15 @@ static int git_branch_config(const char *var, const char *value, void *cb)
return config_error_nonbool(var);
return color_parse(value, branch_colors[slot]);
}
+ if (!strcmp(var, "submodule.recurse")) {
+ recurse_submodules = git_config_bool(var, value);
+ return 0;
+ }
+ if (!strcasecmp(var, "submodule.propagateBranches")) {
+ submodule_propagate_branches = git_config_bool(var, value);
+ return 0;
+ }
+
return git_color_default_config(var, value, cb);
}
@@ -622,7 +634,8 @@ int cmd_branch(int argc, const char **argv, const char *prefix)
const char *new_upstream = NULL;
int noncreate_actions = 0;
/* possible options */
- int reflog = 0, quiet = 0, icase = 0, force = 0;
+ int reflog = 0, quiet = 0, icase = 0, force = 0,
+ recurse_submodules_explicit = 0;
enum branch_track track;
struct ref_filter filter;
static struct ref_sorting *sorting;
@@ -673,6 +686,7 @@ int cmd_branch(int argc, const char **argv, const char *prefix)
OPT_CALLBACK(0, "points-at", &filter.points_at, N_("object"),
N_("print only branches of the object"), parse_opt_object_name),
OPT_BOOL('i', "ignore-case", &icase, N_("sorting and filtering are case insensitive")),
+ OPT_BOOL(0, "recurse-submodules", &recurse_submodules_explicit, N_("recurse through submodules")),
OPT_STRING( 0 , "format", &format.format, N_("format"), N_("format to use for the output")),
OPT_END(),
};
@@ -715,6 +729,17 @@ int cmd_branch(int argc, const char **argv, const char *prefix)
if (noncreate_actions > 1)
usage_with_options(builtin_branch_usage, options);
+ if (recurse_submodules_explicit) {
+ if (!submodule_propagate_branches)
+ die(_("branch with --recurse-submodules can only be used if submodule.propagateBranches is enabled"));
+ if (noncreate_actions)
+ die(_("--recurse-submodules can only be used to create branches"));
+ }
+
+ recurse_submodules =
+ (recurse_submodules || recurse_submodules_explicit) &&
+ submodule_propagate_branches;
+
if (filter.abbrev == -1)
filter.abbrev = DEFAULT_ABBREV;
filter.ignore_case = icase;
@@ -853,6 +878,9 @@ int cmd_branch(int argc, const char **argv, const char *prefix)
git_config_set_multivar(buf.buf, NULL, NULL, CONFIG_FLAGS_MULTI_REPLACE);
strbuf_release(&buf);
} else if (!noncreate_actions && argc > 0 && argc <= 2) {
+ const char *branch_name = argv[0];
+ const char *start_name = argc == 2 ? argv[1] : head;
+
if (filter.kind != FILTER_REFS_BRANCHES)
die(_("The -a, and -r, options to 'git branch' do not take a branch name.\n"
"Did you mean to use: -a|-r --list <pattern>?"));
@@ -860,10 +888,14 @@ int cmd_branch(int argc, const char **argv, const char *prefix)
if (track == BRANCH_TRACK_OVERRIDE)
die(_("the '--set-upstream' option is no longer supported. Please use '--track' or '--set-upstream-to' instead."));
- create_branch(the_repository,
- argv[0], (argc == 2) ? argv[1] : head,
- force, 0, reflog, quiet, track, 0);
-
+ if (recurse_submodules) {
+ create_branches_recursively(the_repository, branch_name,
+ start_name, NULL, force,
+ reflog, quiet, track, 0);
+ return 0;
+ }
+ create_branch(the_repository, branch_name, start_name, force, 0,
+ reflog, quiet, track, 0);
} else
usage_with_options(builtin_branch_usage, options);
diff --git a/builtin/submodule--helper.c b/builtin/submodule--helper.c
index e630f0c..44b6283 100644
--- a/builtin/submodule--helper.c
+++ b/builtin/submodule--helper.c
@@ -20,6 +20,7 @@
#include "diff.h"
#include "object-store.h"
#include "advice.h"
+#include "branch.h"
#define OPT_QUIET (1 << 0)
#define OPT_CACHED (1 << 1)
@@ -2983,6 +2984,42 @@ static int module_set_branch(int argc, const char **argv, const char *prefix)
return !!ret;
}
+static int module_create_branch(int argc, const char **argv, const char *prefix)
+{
+ enum branch_track track;
+ int quiet = 0, force = 0, reflog = 0, dry_run = 0;
+
+ struct option options[] = {
+ OPT__QUIET(&quiet, N_("print only error messages")),
+ OPT__FORCE(&force, N_("force creation"), 0),
+ OPT_BOOL(0, "create-reflog", &reflog,
+ N_("create the branch's reflog")),
+ OPT_SET_INT('t', "track", &track,
+ N_("set up tracking mode (see git-pull(1))"),
+ BRANCH_TRACK_EXPLICIT),
+ OPT__DRY_RUN(&dry_run,
+ N_("show whether the branch would be created")),
+ OPT_END()
+ };
+ const char *const usage[] = {
+ N_("git submodule--helper create-branch [-f|--force] [--create-reflog] [-q|--quiet] [-t|--track] [-n|--dry-run] <name> <start_oid> <start_name>"),
+ NULL
+ };
+
+ git_config(git_default_config, NULL);
+ track = git_branch_track;
+ argc = parse_options(argc, argv, prefix, options, usage, 0);
+
+ if (argc != 3)
+ usage_with_options(usage, options);
+
+ if (!quiet && !dry_run)
+ printf_ln(_("creating branch '%s'"), argv[0]);
+
+ create_branches_recursively(the_repository, argv[0], argv[1], argv[2],
+ force, reflog, quiet, track, dry_run);
+ return 0;
+}
struct add_data {
const char *prefix;
const char *branch;
@@ -3389,6 +3426,7 @@ static struct cmd_struct commands[] = {
{"config", module_config, 0},
{"set-url", module_set_url, 0},
{"set-branch", module_set_branch, 0},
+ {"create-branch", module_create_branch, 0},
};
int cmd_submodule__helper(int argc, const char **argv, const char *prefix)
diff --git a/submodule-config.c b/submodule-config.c
index f953440..c9f54bc 100644
--- a/submodule-config.c
+++ b/submodule-config.c
@@ -7,6 +7,7 @@
#include "strbuf.h"
#include "object-store.h"
#include "parse-options.h"
+#include "tree-walk.h"
/*
* submodule cache lookup structure
@@ -726,6 +727,66 @@ const struct submodule *submodule_from_path(struct repository *r,
return config_from(r->submodule_cache, treeish_name, path, lookup_path);
}
+/**
+ * Used internally by submodules_of_tree(). Recurses into 'treeish_name'
+ * and appends submodule entries to 'out'. The submodule_cache expects
+ * a root-level treeish_name and paths, so keep track of these values
+ * with 'root_tree' and 'prefix'.
+ */
+static void traverse_tree_submodules(struct repository *r,
+ const struct object_id *root_tree,
+ char *prefix,
+ const struct object_id *treeish_name,
+ struct submodule_entry_list *out)
+{
+ struct tree_desc tree;
+ struct submodule_tree_entry *st_entry;
+ struct name_entry *name_entry;
+ char *tree_path = NULL;
+
+ name_entry = xmalloc(sizeof(*name_entry));
+
+ fill_tree_descriptor(r, &tree, treeish_name);
+ while (tree_entry(&tree, name_entry)) {
+ if (prefix)
+ tree_path =
+ mkpathdup("%s/%s", prefix, name_entry->path);
+ else
+ tree_path = xstrdup(name_entry->path);
+
+ if (S_ISGITLINK(name_entry->mode) &&
+ is_tree_submodule_active(r, root_tree, tree_path)) {
+ st_entry = xmalloc(sizeof(*st_entry));
+ st_entry->name_entry = xmalloc(sizeof(*st_entry->name_entry));
+ *st_entry->name_entry = *name_entry;
+ st_entry->submodule =
+ submodule_from_path(r, root_tree, tree_path);
+ st_entry->repo = xmalloc(sizeof(*st_entry->repo));
+ if (repo_submodule_init(st_entry->repo, r, tree_path,
+ root_tree))
+ FREE_AND_NULL(st_entry->repo);
+
+ ALLOC_GROW(out->entries, out->entry_nr + 1,
+ out->entry_alloc);
+ out->entries[out->entry_nr++] = *st_entry;
+ } else if (S_ISDIR(name_entry->mode))
+ traverse_tree_submodules(r, root_tree, tree_path,
+ &name_entry->oid, out);
+ free(tree_path);
+ }
+}
+
+void submodules_of_tree(struct repository *r,
+ const struct object_id *treeish_name,
+ struct submodule_entry_list *out)
+{
+ CALLOC_ARRAY(out->entries, 0);
+ out->entry_nr = 0;
+ out->entry_alloc = 0;
+
+ traverse_tree_submodules(r, treeish_name, NULL, treeish_name, out);
+}
+
void submodule_free(struct repository *r)
{
if (r->submodule_cache)
diff --git a/submodule-config.h b/submodule-config.h
index 65875b9..fa229a8 100644
--- a/submodule-config.h
+++ b/submodule-config.h
@@ -6,6 +6,7 @@
#include "hashmap.h"
#include "submodule.h"
#include "strbuf.h"
+#include "tree-walk.h"
/**
* The submodule config cache API allows to read submodule
@@ -101,4 +102,37 @@ int check_submodule_name(const char *name);
void fetch_config_from_gitmodules(int *max_children, int *recurse_submodules);
void update_clone_config_from_gitmodules(int *max_jobs);
+/*
+ * Submodule entry that contains relevant information about a
+ * submodule in a tree.
+ */
+struct submodule_tree_entry {
+ /* The submodule's tree entry. */
+ struct name_entry *name_entry;
+ /*
+ * A struct repository corresponding to the submodule. May be
+ * NULL if the submodule has not been updated.
+ */
+ struct repository *repo;
+ /*
+ * A struct submodule containing the submodule config in the
+ * tree's .gitmodules.
+ */
+ const struct submodule *submodule;
+};
+
+struct submodule_entry_list {
+ struct submodule_tree_entry *entries;
+ int entry_nr;
+ int entry_alloc;
+};
+
+/**
+ * Given a treeish, return all submodules in the tree and its subtrees,
+ * but excluding nested submodules. Callers that require nested
+ * submodules are expected to recurse into the submodules themselves.
+ */
+void submodules_of_tree(struct repository *r,
+ const struct object_id *treeish_name,
+ struct submodule_entry_list *ret);
#endif /* SUBMODULE_CONFIG_H */
diff --git a/submodule.c b/submodule.c
index c689070..5ace18a 100644
--- a/submodule.c
+++ b/submodule.c
@@ -267,7 +267,9 @@ int option_parse_recurse_submodules_worktree_updater(const struct option *opt,
* ie, the config looks like: "[submodule] active\n".
* Since that is an invalid pathspec, we should inform the user.
*/
-int is_submodule_active(struct repository *repo, const char *path)
+int is_tree_submodule_active(struct repository *repo,
+ const struct object_id *treeish_name,
+ const char *path)
{
int ret = 0;
char *key = NULL;
@@ -275,7 +277,7 @@ int is_submodule_active(struct repository *repo, const char *path)
const struct string_list *sl;
const struct submodule *module;
- module = submodule_from_path(repo, null_oid(), path);
+ module = submodule_from_path(repo, treeish_name, path);
/* early return if there isn't a path->module mapping */
if (!module)
@@ -317,6 +319,11 @@ int is_submodule_active(struct repository *repo, const char *path)
return ret;
}
+int is_submodule_active(struct repository *repo, const char *path)
+{
+ return is_tree_submodule_active(repo, null_oid(), path);
+}
+
int is_submodule_populated_gently(const char *path, int *return_error_code)
{
int ret = 0;
diff --git a/submodule.h b/submodule.h
index 6bd2c99..784ceff 100644
--- a/submodule.h
+++ b/submodule.h
@@ -54,6 +54,9 @@ int git_default_submodule_config(const char *var, const char *value, void *cb);
struct option;
int option_parse_recurse_submodules_worktree_updater(const struct option *opt,
const char *arg, int unset);
+int is_tree_submodule_active(struct repository *repo,
+ const struct object_id *treeish_name,
+ const char *path);
int is_submodule_active(struct repository *repo, const char *path);
/*
* Determine if a submodule has been populated at a given 'path' by checking if
diff --git a/t/t3207-branch-submodule.sh b/t/t3207-branch-submodule.sh
new file mode 100755
index 0000000..6ef2733
--- /dev/null
+++ b/t/t3207-branch-submodule.sh
@@ -0,0 +1,292 @@
+#!/bin/sh
+
+test_description='git branch submodule tests'
+
+GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main
+export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
+
+. ./test-lib.sh
+. "$TEST_DIRECTORY"/lib-rebase.sh
+
+pwd=$(pwd)
+
+# Creates a clean test environment in "pwd" by copying the repo setup
+# from test_dirs.
+reset_test () {
+ rm -fr super &&
+ rm -fr sub-sub-upstream &&
+ rm -fr sub-upstream &&
+ cp -r test_dirs/* .
+}
+
+# Tests that the expected branch does not exist
+test_no_branch () {
+ DIR=$1 &&
+ BRANCH_NAME=$2 &&
+ test_must_fail git -C "$DIR" rev-parse "$BRANCH_NAME" 2>err &&
+ grep "ambiguous argument .$BRANCH_NAME." err
+}
+
+test_expect_success 'setup superproject and submodule' '
+ mkdir test_dirs &&
+ (
+ cd test_dirs &&
+ git init super &&
+ test_commit -C super foo &&
+ git init sub-sub-upstream &&
+ test_commit -C sub-sub-upstream foo &&
+ git init sub-upstream &&
+ # Submodule in a submodule
+ git -C sub-upstream submodule add "${pwd}/test_dirs/sub-sub-upstream" sub-sub &&
+ git -C sub-upstream commit -m "add submodule" &&
+ # Regular submodule
+ git -C super submodule add "${pwd}/test_dirs/sub-upstream" sub &&
+ # Submodule in a subdirectory
+ git -C super submodule add "${pwd}/test_dirs/sub-sub-upstream" second/sub &&
+ git -C super commit -m "add submodule" &&
+ git -C super config submodule.propagateBranches true &&
+ git -C super/sub submodule update --init
+ ) &&
+ reset_test
+'
+
+# Test the argument parsing
+test_expect_success '--recurse-submodules should create branches' '
+ test_when_finished "reset_test" &&
+ (
+ cd super &&
+ git branch --recurse-submodules branch-a &&
+ git rev-parse branch-a &&
+ git -C sub rev-parse branch-a &&
+ git -C sub/sub-sub rev-parse branch-a &&
+ git -C second/sub rev-parse branch-a
+ )
+'
+
+test_expect_success '--recurse-submodules should die if submodule.propagateBranches is false' '
+ test_when_finished "reset_test" &&
+ (
+ cd super &&
+ echo "fatal: branch with --recurse-submodules can only be used if submodule.propagateBranches is enabled" >expected &&
+ test_must_fail git -c submodule.propagateBranches=false branch --recurse-submodules branch-a 2>actual &&
+ test_cmp expected actual
+ )
+'
+
+test_expect_success '--recurse-submodules should fail when not creating branches' '
+ test_when_finished "reset_test" &&
+ (
+ cd super &&
+ git branch --recurse-submodules branch-a &&
+ echo "fatal: --recurse-submodules can only be used to create branches" >expected &&
+ test_must_fail git branch --recurse-submodules -D branch-a 2>actual &&
+ test_cmp expected actual &&
+ # Assert that the branches were not deleted
+ git rev-parse branch-a &&
+ git -C sub rev-parse branch-a
+ )
+'
+
+test_expect_success 'should respect submodule.recurse when creating branches' '
+ test_when_finished "reset_test" &&
+ (
+ cd super &&
+ git -c submodule.recurse=true branch branch-a &&
+ git rev-parse branch-a &&
+ git -C sub rev-parse branch-a
+ )
+'
+
+test_expect_success 'should ignore submodule.recurse when not creating branches' '
+ test_when_finished "reset_test" &&
+ (
+ cd super &&
+ git branch --recurse-submodules branch-a &&
+ git -c submodule.recurse=true branch -D branch-a &&
+ test_no_branch . branch-a &&
+ git -C sub rev-parse branch-a
+ )
+'
+
+# Test branch creation behavior
+test_expect_success 'should create branches based off commit id in superproject' '
+ test_when_finished "reset_test" &&
+ (
+ cd super &&
+ git branch --recurse-submodules branch-a &&
+ git checkout --recurse-submodules branch-a &&
+ git -C sub rev-parse HEAD >expected &&
+ # Move the tip of sub:branch-a so that it no longer matches the commit in super:branch-a
+ git -C sub checkout branch-a &&
+ test_commit -C sub bar &&
+ # Create a new branch-b branch with start-point=branch-a
+ git branch --recurse-submodules branch-b branch-a &&
+ git rev-parse branch-b &&
+ git -C sub rev-parse branch-b >actual &&
+ # Assert that the commit id of sub:second-branch matches super:branch-a and not sub:branch-a
+ test_cmp expected actual
+ )
+'
+
+test_expect_success 'should not create any branches if branch is not valid for all repos' '
+ test_when_finished "reset_test" &&
+ (
+ cd super &&
+ git -C sub branch branch-a &&
+ test_must_fail git branch --recurse-submodules branch-a 2>actual &&
+ test_no_branch . branch-a &&
+ grep "submodule .sub.: fatal: A branch named .branch-a. already exists" actual
+ )
+'
+
+test_expect_success 'should create branches if branch exists and --force is given' '
+ test_when_finished "reset_test" &&
+ (
+ cd super &&
+ git -C sub rev-parse HEAD >expected &&
+ test_commit -C sub baz &&
+ # branch-a in sub now points to a newer commit.
+ git -C sub branch branch-a HEAD &&
+ git -C sub rev-parse branch-a >actual-old-branch-a &&
+ git branch --recurse-submodules --force branch-a &&
+ git rev-parse branch-a &&
+ git -C sub rev-parse branch-a >actual-new-branch-a &&
+ test_cmp expected actual-new-branch-a &&
+ # assert that branch --force actually moved the sub
+ # branch
+ ! test_cmp expected actual-old-branch-a
+ )
+'
+
+test_expect_success 'should create branch when submodule is not in HEAD:.gitmodules' '
+ test_when_finished "reset_test" &&
+ (
+ cd super &&
+ git branch branch-a &&
+ git checkout -b branch-b &&
+ git submodule add ../sub-upstream sub2 &&
+ git -C sub2 submodule update --init &&
+ # branch-b now has a committed submodule not in branch-a
+ git commit -m "add second submodule" &&
+ git checkout branch-a &&
+ git branch --recurse-submodules branch-c branch-b &&
+ git checkout --recurse-submodules branch-c &&
+ git -C sub2 rev-parse branch-c &&
+ git -C sub2/sub-sub rev-parse branch-c
+ )
+'
+
+test_expect_success 'should not create branches in inactive submodules' '
+ test_when_finished "reset_test" &&
+ test_config -C super submodule.sub.active false &&
+ (
+ cd super &&
+ git branch --recurse-submodules branch-a &&
+ git rev-parse branch-a &&
+ test_no_branch sub branch-a
+ )
+'
+
+test_expect_success 'should set up tracking of local branches with track=always' '
+ test_when_finished "reset_test" &&
+ (
+ cd super &&
+ git -c branch.autoSetupMerge=always branch --recurse-submodules branch-a main &&
+ git -C sub rev-parse main &&
+ test_cmp_config -C sub . branch.branch-a.remote &&
+ test_cmp_config -C sub refs/heads/main branch.branch-a.merge
+ )
+'
+
+test_expect_success 'should set up tracking of local branches with explicit track' '
+ test_when_finished "reset_test" &&
+ (
+ cd super &&
+ git branch --track --recurse-submodules branch-a main &&
+ git -C sub rev-parse main &&
+ test_cmp_config -C sub . branch.branch-a.remote &&
+ test_cmp_config -C sub refs/heads/main branch.branch-a.merge
+ )
+'
+
+test_expect_success 'should not set up unnecessary tracking of local branches' '
+ test_when_finished "reset_test" &&
+ (
+ cd super &&
+ git branch --recurse-submodules branch-a main &&
+ git -C sub rev-parse main &&
+ test_cmp_config -C sub "" --default "" branch.branch-a.remote &&
+ test_cmp_config -C sub "" --default "" branch.branch-a.merge
+ )
+'
+
+reset_remote_test () {
+ rm -fr super-clone &&
+ reset_test
+}
+
+test_expect_success 'setup tests with remotes' '
+ (
+ cd test_dirs &&
+ (
+ cd super &&
+ git branch branch-a &&
+ git checkout -b branch-b &&
+ git submodule add ../sub-upstream sub2 &&
+ # branch-b now has a committed submodule not in branch-a
+ git commit -m "add second submodule"
+ ) &&
+ git clone --branch main --recurse-submodules super super-clone &&
+ git -C super-clone config submodule.propagateBranches true
+ ) &&
+ reset_remote_test
+'
+
+test_expect_success 'should get fatal error upon branch creation when submodule is not in .git/modules' '
+ test_when_finished "reset_remote_test" &&
+ (
+ cd super-clone &&
+ # This should succeed because super-clone has sub in .git/modules
+ git branch --recurse-submodules branch-a origin/branch-a &&
+ # This should fail because super-clone does not have sub2 .git/modules
+ test_must_fail git branch --recurse-submodules branch-b origin/branch-b 2>actual &&
+ grep "fatal: submodule .sub2.: unable to find submodule" actual &&
+ test_no_branch . branch-b &&
+ test_no_branch sub branch-b &&
+ # User can fix themselves by initializing the submodule
+ git checkout origin/branch-b &&
+ git submodule update --init --recursive &&
+ git branch --recurse-submodules branch-b origin/branch-b
+ )
+'
+
+test_expect_success 'should set up tracking of remote-tracking branches' '
+ test_when_finished "reset_remote_test" &&
+ (
+ cd super-clone &&
+ git branch --recurse-submodules branch-a origin/branch-a &&
+ test_cmp_config origin branch.branch-a.remote &&
+ test_cmp_config refs/heads/branch-a branch.branch-a.merge &&
+ # "origin/branch-a" does not exist for "sub", but it matches the refspec
+ # so tracking should be set up
+ test_cmp_config -C sub origin branch.branch-a.remote &&
+ test_cmp_config -C sub refs/heads/branch-a branch.branch-a.merge &&
+ test_cmp_config -C sub/sub-sub origin branch.branch-a.remote &&
+ test_cmp_config -C sub/sub-sub refs/heads/branch-a branch.branch-a.merge
+ )
+'
+
+test_expect_success 'should not fail when unable to set up tracking in submodule' '
+ test_when_finished "reset_remote_test" &&
+ (
+ cd super-clone &&
+ git remote rename origin ex-origin &&
+ git branch --recurse-submodules branch-a ex-origin/branch-a &&
+ test_cmp_config ex-origin branch.branch-a.remote &&
+ test_cmp_config refs/heads/branch-a branch.branch-a.merge &&
+ test_cmp_config -C sub "" --default "" branch.branch-a.remote &&
+ test_cmp_config -C sub "" --default "" branch.branch-a.merge
+ )
+'
+
+test_done