summaryrefslogtreecommitdiff
path: root/contrib/hooks
diff options
context:
space:
mode:
authorMatthieu Moy <Matthieu.Moy@imag.fr>2015-06-18 08:46:04 (GMT)
committerJunio C Hamano <gitster@pobox.com>2015-06-18 17:03:52 (GMT)
commit5b1d901c0173b41010856e30776c92d02987ea25 (patch)
treeeca5e73326022ec3e21f564ed45c45563bf76d18 /contrib/hooks
parent16da57c7c6c1fe92b32645202dd19657a89dd67d (diff)
downloadgit-5b1d901c0173b41010856e30776c92d02987ea25.zip
git-5b1d901c0173b41010856e30776c92d02987ea25.tar.gz
git-5b1d901c0173b41010856e30776c92d02987ea25.tar.bz2
git-multimail: update to release 1.1.0
The changes are described in CHANGES. Contributions-by: Matthieu Moy <Matthieu.Moy@imag.fr> Contributions-by: Richard Hansen <rhansen@rhansen.org> Contributions-by: Michael Haggerty <mhagger@alum.mit.edu> Contributions-by: Elijah Newren <newren@gmail.com> Contributions-by: Luke Mewburn <luke@mewburn.net> Contributions-by: Dave Boutcher <daveboutcher@gmail.com> Contributions-by: Azat Khuzhin <a3at.mail@gmail.com> Contributions-by: Sebastian Schuberth <sschuberth@gmail.com> Contributions-by: Mikko Johannes Koivunalho <mikko.koivunalho@iki.fi> Contributions-by: Elijah Newren <newren@palantir.com> Contributions-by: BenoƮt Ryder <benoit@ryder.fr> Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Diffstat (limited to 'contrib/hooks')
-rw-r--r--contrib/hooks/multimail/CHANGES48
-rw-r--r--contrib/hooks/multimail/README279
-rw-r--r--contrib/hooks/multimail/README.Git4
-rwxr-xr-xcontrib/hooks/multimail/git_multimail.py967
-rwxr-xr-xcontrib/hooks/multimail/migrate-mailhook-config18
-rwxr-xr-xcontrib/hooks/multimail/post-receive.example (renamed from contrib/hooks/multimail/post-receive)27
6 files changed, 1017 insertions, 326 deletions
diff --git a/contrib/hooks/multimail/CHANGES b/contrib/hooks/multimail/CHANGES
index 3603d56..0b823d8 100644
--- a/contrib/hooks/multimail/CHANGES
+++ b/contrib/hooks/multimail/CHANGES
@@ -1,3 +1,51 @@
+Release 1.1.0
+=============
+
+* When a single commit is pushed, omit the reference changed email.
+ Set multimailhook.combineWhenSingleCommit to false to disable this
+ new feature.
+
+* In gitolite environments, the pusher's email address can be used as
+ the From address by creating a specially formatted comment block in
+ gitolite.conf (see multimailhook.from in README).
+
+* Support for SMTP authentication and SSL/TLS encryption was added,
+ see smtpUser, smtpPass, smtpEncryption in README.
+
+* A new option scanCommitForCc was added to allow git-multimail to
+ search the commit message for 'Cc: ...' lines, and add the
+ corresponding emails in Cc.
+
+* If $USER is not set, use the variable $USERNAME. This is needed on
+ Windows platform to recognize the pusher.
+
+* The emailPrefix variable can now be set to an empty string to remove
+ the prefix.
+
+* A short tutorial was added in doc/gitolite.rst to set up
+ git-multimail with gitolite.
+
+* The post-receive file was renamed to post-receive.example. It has
+ always been an example (the standard way to call git-multimail is to
+ call git_multimail.py), but it was unclear to many users.
+
+* A new refchangeShowGraph option was added to make it possible to
+ include both a graph and a log in the summary emails. The options
+ to control the graph formatting can be set via the new graphOpts
+ option.
+
+* New option --force-send was added to disable new commit detection
+ for update hook. One use-case is to run git_multimail.py after
+ running "git fetch" to send emails about commits that have just been
+ fetched (the detection of new commits was unreliable in this mode).
+
+* The testing infrastructure was considerably improved (continuous
+ integration with travis-ci, automatic check of PEP8 and RST syntax,
+ many improvements to the test scripts).
+
+This version has been tested with Python 2.4 to 2.7, and Git 1.7.1 to
+2.4.
+
Release 1.0.0
=============
diff --git a/contrib/hooks/multimail/README b/contrib/hooks/multimail/README
index 6efa4ff..3a33cb7 100644
--- a/contrib/hooks/multimail/README
+++ b/contrib/hooks/multimail/README
@@ -1,5 +1,8 @@
- git-multimail
- =============
+git-multimail Version 1.1.0
+===========================
+
+.. image:: https://travis-ci.org/git-multimail/git-multimail.svg?branch=master
+ :target: https://travis-ci.org/git-multimail/git-multimail
git-multimail is a tool for sending notification emails on pushes to a
Git repository. It includes a Python module called git_multimail.py,
@@ -38,17 +41,17 @@ By default, for each push received by the repository, git-multimail:
list) makes it easy to scan through the emails, jump to patches
that need further attention, and write comments about specific
commits. Commits are handled in reverse topological order (i.e.,
- parents shown before children). For example,
-
- [git] branch master updated
- + [git] 01/08: doc: fix xref link from api docs to manual pages
- + [git] 02/08: api-credentials.txt: show the big picture first
- + [git] 03/08: api-credentials.txt: mention credential.helper explicitly
- + [git] 04/08: api-credentials.txt: add "see also" section
- + [git] 05/08: t3510 (cherry-pick-sequence): add missing '&&'
- + [git] 06/08: Merge branch 'rr/maint-t3510-cascade-fix'
- + [git] 07/08: Merge branch 'mm/api-credentials-doc'
- + [git] 08/08: Git 1.7.11-rc2
+ parents shown before children). For example::
+
+ [git] branch master updated
+ + [git] 01/08: doc: fix xref link from api docs to manual pages
+ + [git] 02/08: api-credentials.txt: show the big picture first
+ + [git] 03/08: api-credentials.txt: mention credential.helper explicitly
+ + [git] 04/08: api-credentials.txt: add "see also" section
+ + [git] 05/08: t3510 (cherry-pick-sequence): add missing '&&'
+ + [git] 06/08: Merge branch 'rr/maint-t3510-cascade-fix'
+ + [git] 07/08: Merge branch 'mm/api-credentials-doc'
+ + [git] 08/08: Git 1.7.11-rc2
Each commit appears in exactly one commit email, the first time
that it is pushed to the repository. If a commit is later merged
@@ -74,19 +77,19 @@ Requirements
3.x.
The example scripts invoke Python using the following shebang line
- (following PEP 394 [1]):
+ (following PEP 394 [1]_)::
#! /usr/bin/env python2
If your system's Python2 interpreter is not in your PATH or is not
- called "python2", you can change the lines accordingly. Or you can
+ called ``python2``, you can change the lines accordingly. Or you can
invoke the Python interpreter explicitly, for example via a tiny
- shell script like
+ shell script like::
#! /bin/sh
/usr/local/bin/python /path/to/git_multimail.py "$@"
-* The "git" command must be in your PATH. git-multimail is known to
+* The ``git`` command must be in your PATH. git-multimail is known to
work with Git versions back to 1.7.1. (Earlier versions have not
been tested; if you do so, please report your results.)
@@ -101,7 +104,7 @@ Requirements
Invocation
----------
-git_multimail.py is designed to be used as a "post-receive" hook in a
+git_multimail.py is designed to be used as a ``post-receive`` hook in a
Git repository (see githooks(5)). Link or copy it to
$GIT_DIR/hooks/post-receive within the repository for which email
notifications are desired. Usually it should be installed on the
@@ -109,10 +112,10 @@ central repository for a project, to which all commits are eventually
pushed.
For use on pre-v1.5.1 Git servers, git_multimail.py can also work as
-an "update" hook, taking its arguments on the command line. To use
+an ``update`` hook, taking its arguments on the command line. To use
this script in this manner, link or copy it to $GIT_DIR/hooks/update.
Please note that the script is not completely reliable in this mode
-[2].
+[2]_.
Alternatively, git_multimail.py can be imported as a Python module
into your own Python post-receive script. This method is a bit more
@@ -129,7 +132,7 @@ arbitrary Python code. For example, you can use a custom environment
only about changes affecting particular files or subdirectories)
Or you can change how emails are sent by writing your own Mailer
-class. The "post-receive" script in this directory demonstrates how
+class. The ``post-receive`` script in this directory demonstrates how
to use git_multimail.py as a Python module. (If you make interesting
changes of this type, please consider sharing them with the
community.)
@@ -139,18 +142,26 @@ Configuration
-------------
By default, git-multimail mostly takes its configuration from the
-following "git config" settings:
+following ``git config`` settings:
multimailhook.environment
This describes the general environment of the repository.
Currently supported values:
- "generic" -- the username of the pusher is read from $USER and the
- repository name is derived from the repository's path.
+ * generic
+
+ the username of the pusher is read from $USER or $USERNAME and
+ the repository name is derived from the repository's path.
+
+ * gitolite
- "gitolite" -- the username of the pusher is read from $GL_USER and
- the repository name from $GL_REPO.
+ the username of the pusher is read from $GL_USER, the repository
+ name is read from $GL_REPO, and the From: header value is
+ optionally read from gitolite.conf (see multimailhook.from).
+
+ For more information about gitolite and git-multimail, read
+ doc/gitolite.rst
If neither of these environments is suitable for your setup, then
you can implement a Python class that inherits from Environment
@@ -160,8 +171,8 @@ multimailhook.environment
The environment value can be specified on the command line using
the --environment option. If it is not specified on the command
line or by multimailhook.environment, then it defaults to
- "gitolite" if the environment contains variables $GL_USER and
- $GL_REPO; otherwise "generic".
+ ``gitolite`` if the environment contains variables $GL_USER and
+ $GL_REPO; otherwise ``generic``.
multimailhook.repoName
@@ -219,61 +230,109 @@ multimailhook.announceShortlog
not so straightforward, then the shortlog might be confusing
rather than useful. Default is false.
+multimailhook.refchangeShowGraph
+
+ If this option is set to true, then summary emails about reference
+ changes will additionally include:
+
+ * a graph of the added commits (if any)
+
+ * a graph of the discarded commits (if any)
+
+ The log is generated by running ``git log --graph`` with the options
+ specified in graphOpts. The default is false.
+
multimailhook.refchangeShowLog
If this option is set to true, then summary emails about reference
changes will include a detailed log of the added commits in
addition to the one line summary. The log is generated by running
- "git log" with the options specified in multimailhook.logOpts.
+ ``git log`` with the options specified in multimailhook.logOpts.
Default is false.
multimailhook.mailer
This option changes the way emails are sent. Accepted values are:
- - sendmail (the default): use the command /usr/sbin/sendmail or
- /usr/lib/sendmail (or sendmailCommand, if configured). This
+ - sendmail (the default): use the command ``/usr/sbin/sendmail`` or
+ ``/usr/lib/sendmail`` (or sendmailCommand, if configured). This
mode can be further customized via the following options:
- multimailhook.sendmailCommand
+ * multimailhook.sendmailCommand
- The command used by mailer "sendmail" to send emails. Shell
- quoting is allowed in the value of this setting, but remember that
- Git requires double-quotes to be escaped; e.g.,
+ The command used by mailer ``sendmail`` to send emails. Shell
+ quoting is allowed in the value of this setting, but remember that
+ Git requires double-quotes to be escaped; e.g.::
git config multimailhook.sendmailcommand '/usr/sbin/sendmail -oi -t -F \"Git Repo\"'
- Default is '/usr/sbin/sendmail -oi -t' or
- '/usr/lib/sendmail -oi -t' (depending on which file is
- present and executable).
+ Default is '/usr/sbin/sendmail -oi -t' or
+ '/usr/lib/sendmail -oi -t' (depending on which file is
+ present and executable).
- multimailhook.envelopeSender
+ * multimailhook.envelopeSender
- If set then pass this value to sendmail via the -f option to set
- the envelope sender address.
+ If set then pass this value to sendmail via the -f option to set
+ the envelope sender address.
- smtp: use Python's smtplib. This is useful when the sendmail
command is not available on the system. This mode can be
further customized via the following options:
- multimailhook.smtpServer
+ * multimailhook.smtpServer
+
+ The name of the SMTP server to connect to. The value can
+ also include a colon and a port number; e.g.,
+ ``mail.example.com:25``. Default is 'localhost' using port 25.
+
+ * multimailhook.smtpUser
+ * multimailhook.smtpPass
+
+ Server username and password. Required if smtpEncryption is 'ssl'.
+ Note that the username and password currently need to be
+ set cleartext in the configuration file, which is not
+ recommended. If you need to use this option, be sure your
+ configuration file is read-only.
+
+ * multimailhook.envelopeSender
+
+ The sender address to be passed to the SMTP server. If
+ unset, then the value of multimailhook.from is used.
+
+ * multimailhook.smtpServerTimeout
+
+ Timeout in seconds.
- The name of the SMTP server to connect to. The value can
- also include a colon and a port number; e.g.,
- "mail.example.com:25". Default is 'localhost' using port
- 25.
+ * multimailhook.smtpEncryption
- multimailhook.envelopeSender
+ Set the security type. Allowed values: none, ssl.
+ Default=none.
- The sender address to be passed to the SMTP server. If
- unset, then the value of multimailhook.from is used.
+ * multimailhook.smtpServerDebugLevel
+
+ Integer number. Set to greater than 0 to activate debugging.
multimailhook.from
- If set then use this value in the From: field of generated emails.
- If unset, then use the repository's user configuration (user.name
- and user.email). If user.email is also unset, then use
- multimailhook.envelopeSender.
+ If set, use this value in the From: field of generated emails. If
+ unset, the value of the From: header is determined as follows:
+
+ 1. (gitolite environment only) Parse gitolite.conf, looking for a
+ block of comments that looks like this::
+
+ # BEGIN USER EMAILS
+ # username Firstname Lastname <email@example.com>
+ # END USER EMAILS
+
+ If that block exists, and there is a line between the BEGIN
+ USER EMAILS and END USER EMAILS lines where the first field
+ matches the gitolite username ($GL_USER), use the rest of the
+ line for the From: header.
+
+ 2. If the user.email configuration setting is set, use its value
+ (and the value of user.name, if set).
+
+ 3. Use the value of multimailhook.envelopeSender.
multimailhook.administrator
@@ -287,7 +346,8 @@ multimailhook.emailPrefix
All emails have this string prepended to their subjects, to aid
email filtering (though filtering based on the X-Git-* email
headers is probably more robust). Default is the short name of
- the repository in square brackets; e.g., "[myrepo]".
+ the repository in square brackets; e.g., ``[myrepo]``. Set this
+ value to the empty string to suppress the email prefix.
multimailhook.emailMaxLines
@@ -299,7 +359,7 @@ multimailhook.emailMaxLines
multimailhook.emailMaxLineLength
The maximum length of a line in the email body. Lines longer than
- this limit are truncated to this length with a trailing " [...]"
+ this limit are truncated to this length with a trailing `` [...]``
added to indicate the missing text. The default is 500, because
(a) diffs with longer lines are probably from binary files, for
which a diff is useless, and (b) even if a text file has such long
@@ -316,54 +376,62 @@ multimailhook.maxCommitEmails
multimailhook.emailStrictUTF8
- If this boolean option is set to "true", then the main part of the
+ If this boolean option is set to `true`, then the main part of the
email body is forced to be valid UTF-8. Any characters that are
not valid UTF-8 are converted to the Unicode replacement
- character, U+FFFD. The default is "true".
+ character, U+FFFD. The default is `true`.
multimailhook.diffOpts
- Options passed to "git diff-tree" when generating the summary
- information for ReferenceChange emails. Default is "--stat
- --summary --find-copies-harder". Add -p to those options to
+ Options passed to ``git diff-tree`` when generating the summary
+ information for ReferenceChange emails. Default is ``--stat
+ --summary --find-copies-harder``. Add -p to those options to
include a unified diff of changes in addition to the usual summary
output. Shell quoting is allowed; see multimailhook.logOpts for
details.
+multimailhook.graphOpts
+
+ Options passed to ``git log --graph`` when generating graphs for the
+ reference change summary emails (used only if refchangeShowGraph
+ is true). The default is '--oneline --decorate'.
+
+ Shell quoting is allowed; see logOpts for details.
+
multimailhook.logOpts
- Options passed to "git log" to generate additional info for
+ Options passed to ``git log`` to generate additional info for
reference change emails (used only if refchangeShowLog is set).
- For example, adding --graph will show the graph of revisions, -p
- will show the complete diff, etc. The default is empty.
+ For example, adding -p will show each commit's complete diff. The
+ default is empty.
Shell quoting is allowed; for example, a log format that contains
- spaces can be specified using something like:
+ spaces can be specified using something like::
git config multimailhook.logopts '--pretty=format:"%h %aN <%aE>%n%s%n%n%b%n"'
If you want to set this by editing your configuration file
directly, remember that Git requires double-quotes to be escaped
- (see git-config(1) for more information):
+ (see git-config(1) for more information)::
[multimailhook]
logopts = --pretty=format:\"%h %aN <%aE>%n%s%n%n%b%n\"
multimailhook.commitLogOpts
- Options passed to "git log" to generate additional info for
+ Options passed to ``git log`` to generate additional info for
revision change emails. For example, adding --ignore-all-spaces
- will suppress whitespace changes. The default options are "-C
- --stat -p --cc". Shell quoting is allowed; see
+ will suppress whitespace changes. The default options are ``-C
+ --stat -p --cc``. Shell quoting is allowed; see
multimailhook.logOpts for details.
multimailhook.emailDomain
Domain name appended to the username of the person doing the push
- to convert it into an email address (via "%s@%s" % (username,
- emaildomain)). More complicated schemes can be implemented by
- overriding Environment and overriding its get_pusher_email()
- method.
+ to convert it into an email address
+ (via ``"%s@%s" % (username, emaildomain)``). More complicated
+ schemes can be implemented by overriding Environment and
+ overriding its get_pusher_email() method.
multimailhook.replyTo
multimailhook.replyToCommit
@@ -377,26 +445,48 @@ multimailhook.replyToRefchange
- An email address, which will be used directly.
- - The value "pusher", in which case the pusher's address (if
+ - The value `pusher`, in which case the pusher's address (if
available) will be used. This is the default for refchange
emails.
- - The value "author" (meaningful only for replyToCommit), in which
+ - The value `author` (meaningful only for replyToCommit), in which
case the commit author's address will be used. This is the
default for commit emails.
- - The value "none", in which case the Reply-To: field will be
+ - The value `none`, in which case the Reply-To: field will be
omitted.
+multimailhook.quiet
+
+ Do not output the list of email recipients from the hook
+
+multimailhook.stdout
+
+ For debugging, send emails to stdout rather than to the
+ mailer. Equivalent to the --stdout command line option
+
+multimailhook.scanCommitForCc
+
+ If this option is set to true, than recipients from lines in commit body
+ that starts with ``CC:`` will be added to CC list.
+ Default: false
+
+multimailhook.combineWhenSingleCommit
+
+ If this option is set to true and a single new commit is pushed to
+ a branch, combine the summary and commit email messages into a
+ single email.
+ Default: true
+
Email filtering aids
--------------------
All emails include extra headers to enable fine tuned filtering and
give information for debugging. All emails include the headers
-"X-Git-Host", "X-Git-Repo", "X-Git-Refname", and "X-Git-Reftype".
-ReferenceChange emails also include headers "X-Git-Oldrev" and "X-Git-Newrev";
-Revision emails also include header "X-Git-Rev".
+``X-Git-Host``, ``X-Git-Repo``, ``X-Git-Refname``, and ``X-Git-Reftype``.
+ReferenceChange emails also include headers ``X-Git-Oldrev`` and ``X-Git-Newrev``;
+Revision emails also include header ``X-Git-Rev``.
Customizing email contents
@@ -420,16 +510,17 @@ environment are built in:
* GenericEnvironment: a stand-alone Git repository.
* GitoliteEnvironment: a Git repository that is managed by gitolite
- [3]. For such repositories, the identity of the pusher is read from
- environment variable $GL_USER, and the name of the repository is
- read from $GL_REPO (if it is not overridden by
- multimailhook.reponame).
+ [3]_. For such repositories, the identity of the pusher is read from
+ environment variable $GL_USER, the name of the repository is read
+ from $GL_REPO (if it is not overridden by multimailhook.reponame),
+ and the From: header value is optionally read from gitolite.conf
+ (see multimailhook.from).
By default, git-multimail assumes GitoliteEnvironment if $GL_USER and
$GL_REPO are set, and otherwise assumes GenericEnvironment.
Alternatively, you can choose one of these two environments explicitly
-by setting a "multimailhook.environment" config setting (which can
-have the value "generic" or "gitolite") or by passing an --environment
+by setting a ``multimailhook.environment`` config setting (which can
+have the value `generic` or `gitolite`) or by passing an --environment
option to the script.
If you need to customize the script in ways that are not supported by
@@ -439,8 +530,8 @@ git_multimail.py as a Python module, as demonstrated by the example
post-receive script. Then implement your environment class; it should
usually inherit from one of the existing Environment classes and
possibly one or more of the EnvironmentMixin classes. Then set the
-"environment" variable to an instance of your own environment class
-and pass it to run_as_post_receive_hook().
+``environment`` variable to an instance of your own environment class
+and pass it to ``run_as_post_receive_hook()``.
The standard environment classes, GenericEnvironment and
GitoliteEnvironment, are in fact themselves put together out of a
@@ -490,12 +581,14 @@ don't overlook them.
Footnotes
---------
-[1] http://www.python.org/dev/peps/pep-0394/
+.. [1] http://www.python.org/dev/peps/pep-0394/
-[2] Because of the way information is passed to update hooks, the
- script's method of determining whether a commit has already been
- seen does not work when it is used as an "update" script. In
- particular, no notification email will be generated for a new
- commit that is added to multiple references in the same push.
+.. [2] Because of the way information is passed to update hooks, the
+ script's method of determining whether a commit has already
+ been seen does not work when it is used as an ``update`` script.
+ In particular, no notification email will be generated for a
+ new commit that is added to multiple references in the same
+ push. A workaround is to use --force-send to force sending the
+ emails.
-[3] https://github.com/sitaramc/gitolite
+.. [3] https://github.com/sitaramc/gitolite
diff --git a/contrib/hooks/multimail/README.Git b/contrib/hooks/multimail/README.Git
index ab3ece5..449d36f 100644
--- a/contrib/hooks/multimail/README.Git
+++ b/contrib/hooks/multimail/README.Git
@@ -6,10 +6,10 @@ website:
https://github.com/git-multimail/git-multimail
The version in this directory was obtained from the upstream project
-on 2015-04-27 and consists of the "git-multimail" subdirectory from
+on Jun 18 2015 and consists of the "git-multimail" subdirectory from
revision
- 8c3aaafa873bf10de8dddf1d202c449b3eff3b42 refs/tags/1.0.2
+ 1f0dbb3b60035767889b913df16d9231ecdb8709 refs/tags/1.1.0
Please see the README file in this directory for information about how
to report bugs or contribute to git-multimail.
diff --git a/contrib/hooks/multimail/git_multimail.py b/contrib/hooks/multimail/git_multimail.py
index 8b58ed6..7cb2b36 100755
--- a/contrib/hooks/multimail/git_multimail.py
+++ b/contrib/hooks/multimail/git_multimail.py
@@ -1,5 +1,6 @@
#! /usr/bin/env python2
+# Copyright (c) 2015 Matthieu Moy and others
# Copyright (c) 2012-2014 Michael Haggerty and others
# Derived from contrib/hooks/post-receive-email, which is
# Copyright (c) 2007 Andy Parkins
@@ -99,6 +100,10 @@ REF_DELETED_SUBJECT_TEMPLATE = (
' (was %(oldrev_short)s)'
)
+COMBINED_REFCHANGE_REVISION_SUBJECT_TEMPLATE = (
+ '%(emailprefix)s%(refname_type)s %(short_refname)s updated: %(oneline)s'
+ )
+
REFCHANGE_HEADER_TEMPLATE = """\
Date: %(send_date)s
To: %(recipients)s
@@ -230,6 +235,7 @@ how to provide full information about this reference change.
REVISION_HEADER_TEMPLATE = """\
Date: %(send_date)s
To: %(recipients)s
+Cc: %(cc_recipients)s
Subject: %(emailprefix)s%(num)02d/%(tot)02d: %(oneline)s
MIME-Version: 1.0
Content-Type: text/plain; charset=%(charset)s
@@ -258,6 +264,38 @@ in repository %(repo_shortname)s.
REVISION_FOOTER_TEMPLATE = FOOTER_TEMPLATE
+# Combined, meaning refchange+revision email (for single-commit additions)
+COMBINED_HEADER_TEMPLATE = """\
+Date: %(send_date)s
+To: %(recipients)s
+Subject: %(subject)s
+MIME-Version: 1.0
+Content-Type: text/plain; charset=%(charset)s
+Content-Transfer-Encoding: 8bit
+Message-ID: %(msgid)s
+From: %(fromaddr)s
+Reply-To: %(reply_to)s
+X-Git-Host: %(fqdn)s
+X-Git-Repo: %(repo_shortname)s
+X-Git-Refname: %(refname)s
+X-Git-Reftype: %(refname_type)s
+X-Git-Oldrev: %(oldrev)s
+X-Git-Newrev: %(newrev)s
+X-Git-Rev: %(rev)s
+Auto-Submitted: auto-generated
+"""
+
+COMBINED_INTRO_TEMPLATE = """\
+This is an automated email from the git hooks/post-receive script.
+
+%(pusher)s pushed a commit to %(refname_type)s %(short_refname)s
+in repository %(repo_shortname)s.
+
+"""
+
+COMBINED_FOOTER_TEMPLATE = FOOTER_TEMPLATE
+
+
class CommandError(Exception):
def __init__(self, cmd, retcode):
self.cmd = cmd
@@ -336,6 +374,47 @@ def read_git_lines(args, keepends=False, **kw):
return read_git_output(args, keepends=True, **kw).splitlines(keepends)
+def git_rev_list_ish(cmd, spec, args=None, **kw):
+ """Common functionality for invoking a 'git rev-list'-like command.
+
+ Parameters:
+ * cmd is the Git command to run, e.g., 'rev-list' or 'log'.
+ * spec is a list of revision arguments to pass to the named
+ command. If None, this function returns an empty list.
+ * args is a list of extra arguments passed to the named command.
+ * All other keyword arguments (if any) are passed to the
+ underlying read_git_lines() function.
+
+ Return the output of the Git command in the form of a list, one
+ entry per output line.
+ """
+ if spec is None:
+ return []
+ if args is None:
+ args = []
+ args = [cmd, '--stdin'] + args
+ spec_stdin = ''.join(s + '\n' for s in spec)
+ return read_git_lines(args, input=spec_stdin, **kw)
+
+
+def git_rev_list(spec, **kw):
+ """Run 'git rev-list' with the given list of revision arguments.
+
+ See git_rev_list_ish() for parameter and return value
+ documentation.
+ """
+ return git_rev_list_ish('rev-list', spec, **kw)
+
+
+def git_log(spec, **kw):
+ """Run 'git log' with the given list of revision arguments.
+
+ See git_rev_list_ish() for parameter and return value
+ documentation.
+ """
+ return git_rev_list_ish('log', spec, **kw)
+
+
def header_encode(text, header_name=None):
"""Encode and line-wrap the value of an email header field."""
@@ -388,9 +467,9 @@ class Config(object):
def get(self, name, default=None):
try:
values = self._split(read_git_output(
- ['config', '--get', '--null', '%s.%s' % (self.section, name)],
- env=self.env, keepends=True,
- ))
+ ['config', '--get', '--null', '%s.%s' % (self.section, name)],
+ env=self.env, keepends=True,
+ ))
assert len(values) == 1
return values[0]
except CommandError:
@@ -449,9 +528,14 @@ class Config(object):
env=self.env,
)
- def has_key(self, name):
+ def __contains__(self, name):
return self.get_all(name, default=None) is not None
+ # We don't use this method anymore internally, but keep it here in
+ # case somebody is calling it from their own code:
+ def has_key(self, name):
+ return name in self
+
def unset_all(self, name):
try:
read_git_output(
@@ -579,7 +663,7 @@ class Change(object):
self._values = None
def _compute_values(self):
- """Return a dictionary {keyword : expansion} for this Change.
+ """Return a dictionary {keyword: expansion} for this Change.
Derived classes overload this method to add more entries to
the return value. This method is used internally by
@@ -589,7 +673,7 @@ class Change(object):
return self.environment.get_values()
def get_values(self, **extra_values):
- """Return a dictionary {keyword : expansion} for this Change.
+ """Return a dictionary {keyword: expansion} for this Change.
Return a dictionary mapping keywords to the values that they
should be expanded to for this Change (used when interpolating
@@ -636,7 +720,7 @@ class Change(object):
value = value % values
except KeyError, e:
if DEBUG:
- sys.stderr.write(
+ self.environment.log_warning(
'Warning: unknown variable %r in the following line; line skipped:\n'
' %s\n'
% (e.args[0], line,)
@@ -711,6 +795,8 @@ class Change(object):
class Revision(Change):
"""A Change consisting of a single git commit."""
+ CC_RE = re.compile(r'^\s*C[Cc]:\s*(?P<to>[^#]+@[^\s#]*)\s*(#.*)?$')
+
def __init__(self, reference_change, rev, num, tot):
Change.__init__(self, reference_change.environment)
self.reference_change = reference_change
@@ -722,6 +808,24 @@ class Revision(Change):
self.author = read_git_output(['log', '--no-walk', '--format=%aN <%aE>', self.rev.sha1])
self.recipients = self.environment.get_revision_recipients(self)
+ self.cc_recipients = ''
+ if self.environment.get_scancommitforcc():
+ self.cc_recipients = ', '.join(to.strip() for to in self._cc_recipients())
+ if self.cc_recipients:
+ self.environment.log_msg(
+ 'Add %s to CC for %s\n' % (self.cc_recipients, self.rev.sha1))
+
+ def _cc_recipients(self):
+ cc_recipients = []
+ message = read_git_output(['log', '--no-walk', '--format=%b', self.rev.sha1])
+ lines = message.strip().split('\n')
+ for line in lines:
+ m = re.match(self.CC_RE, line)
+ if m:
+ cc_recipients.append(m.group('to'))
+
+ return cc_recipients
+
def _compute_values(self):
values = Change._compute_values(self)
@@ -739,6 +843,8 @@ class Revision(Change):
values['num'] = self.num
values['tot'] = self.tot
values['recipients'] = self.recipients
+ if self.cc_recipients:
+ values['cc_recipients'] = self.cc_recipients
values['oneline'] = oneline
values['author'] = self.author
@@ -750,8 +856,8 @@ class Revision(Change):
def generate_email_header(self, **extra_values):
for line in self.expand_header_lines(
- REVISION_HEADER_TEMPLATE, **extra_values
- ):
+ REVISION_HEADER_TEMPLATE, **extra_values
+ ):
yield line
def generate_email_intro(self):
@@ -822,26 +928,26 @@ class ReferenceChange(Change):
klass = BranchChange
elif area == 'remotes':
# Tracking branch:
- sys.stderr.write(
+ environment.log_warning(
'*** Push-update of tracking branch %r\n'
'*** - incomplete email generated.\n'
- % (refname,)
+ % (refname,)
)
klass = OtherReferenceChange
else:
# Some other reference namespace:
- sys.stderr.write(
+ environment.log_warning(
'*** Push-update of strange reference %r\n'
'*** - incomplete email generated.\n'
- % (refname,)
+ % (refname,)
)
klass = OtherReferenceChange
else:
# Anything else (is there anything else?)
- sys.stderr.write(
+ environment.log_warning(
'*** Unknown type of update to %r (%s)\n'
'*** - incomplete email generated.\n'
- % (refname, rev.type,)
+ % (refname, rev.type,)
)
klass = OtherReferenceChange
@@ -854,9 +960,9 @@ class ReferenceChange(Change):
def __init__(self, environment, refname, short_refname, old, new, rev):
Change.__init__(self, environment)
self.change_type = {
- (False, True) : 'create',
- (True, True) : 'update',
- (True, False) : 'delete',
+ (False, True): 'create',
+ (True, True): 'update',
+ (True, False): 'delete',
}[bool(old), bool(new)]
self.refname = refname
self.short_refname = short_refname
@@ -865,10 +971,16 @@ class ReferenceChange(Change):
self.rev = rev
self.msgid = make_msgid()
self.diffopts = environment.diffopts
+ self.graphopts = environment.graphopts
self.logopts = environment.logopts
self.commitlogopts = environment.commitlogopts
+ self.showgraph = environment.refchange_showgraph
self.showlog = environment.refchange_showlog
+ self.header_template = REFCHANGE_HEADER_TEMPLATE
+ self.intro_template = REFCHANGE_INTRO_TEMPLATE
+ self.footer_template = FOOTER_TEMPLATE
+
def _compute_values(self):
values = Change._compute_values(self)
@@ -894,11 +1006,39 @@ class ReferenceChange(Change):
return values
+ def send_single_combined_email(self, known_added_sha1s):
+ """Determine if a combined refchange/revision email should be sent
+
+ If there is only a single new (non-merge) commit added by a
+ change, it is useful to combine the ReferenceChange and
+ Revision emails into one. In such a case, return the single
+ revision; otherwise, return None.
+
+ This method is overridden in BranchChange."""
+
+ return None
+
+ def generate_combined_email(self, push, revision, body_filter=None, extra_header_values={}):
+ """Generate an email describing this change AND specified revision.
+
+ Iterate over the lines (including the header lines) of an
+ email describing this change. If body_filter is not None,
+ then use it to filter the lines that are intended for the
+ email body.
+
+ The extra_header_values field is received as a dict and not as
+ **kwargs, to allow passing other keyword arguments in the
+ future (e.g. passing extra values to generate_email_intro()
+
+ This method is overridden in BranchChange."""
+
+ raise NotImplementedError
+
def get_subject(self):
template = {
- 'create' : REF_CREATED_SUBJECT_TEMPLATE,
- 'update' : REF_UPDATED_SUBJECT_TEMPLATE,
- 'delete' : REF_DELETED_SUBJECT_TEMPLATE,
+ 'create': REF_CREATED_SUBJECT_TEMPLATE,
+ 'update': REF_UPDATED_SUBJECT_TEMPLATE,
+ 'delete': REF_DELETED_SUBJECT_TEMPLATE,
}[self.change_type]
return self.expand(template)
@@ -907,12 +1047,12 @@ class ReferenceChange(Change):
extra_values['subject'] = self.get_subject()
for line in self.expand_header_lines(
- REFCHANGE_HEADER_TEMPLATE, **extra_values
- ):
+ self.header_template, **extra_values
+ ):
yield line
def generate_email_intro(self):
- for line in self.expand_lines(REFCHANGE_INTRO_TEMPLATE):
+ for line in self.expand_lines(self.intro_template):
yield line
def generate_email_body(self, push):
@@ -922,9 +1062,9 @@ class ReferenceChange(Change):
generate_update_summary() / generate_delete_summary()."""
change_summary = {
- 'create' : self.generate_create_summary,
- 'delete' : self.generate_delete_summary,
- 'update' : self.generate_update_summary,
+ 'create': self.generate_create_summary,
+ 'delete': self.generate_delete_summary,
+ 'update': self.generate_update_summary,
}[self.change_type](push)
for line in change_summary:
yield line
@@ -933,7 +1073,23 @@ class ReferenceChange(Change):
yield line
def generate_email_footer(self):
- return self.expand_lines(FOOTER_TEMPLATE)
+ return self.expand_lines(self.footer_template)
+
+ def generate_revision_change_graph(self, push):
+ if self.showgraph:
+ args = ['--graph'] + self.graphopts
+ for newold in ('new', 'old'):
+ has_newold = False
+ spec = push.get_commits_spec(newold, self)
+ for line in git_log(spec, args=args, keepends=True):
+ if not has_newold:
+ has_newold = True
+ yield '\n'
+ yield 'Graph of %s commits:\n\n' % (
+ {'new': 'new', 'old': 'discarded'}[newold],)
+ yield ' ' + line
+ if has_newold:
+ yield '\n'
def generate_revision_change_log(self, new_commits_list):
if self.showlog:
@@ -945,9 +1101,17 @@ class ReferenceChange(Change):
+ new_commits_list
+ ['--'],
keepends=True,
- ):
+ ):
yield line
+ def generate_new_revision_summary(self, tot, new_commits_list, push):
+ for line in self.expand_lines(NEW_REVISIONS_TEMPLATE, tot=tot):
+ yield line
+ for line in self.generate_revision_change_graph(push):
+ yield line
+ for line in self.generate_revision_change_log(new_commits_list):
+ yield line
+
def generate_revision_change_summary(self, push):
"""Generate a summary of the revisions added/removed by this change."""
@@ -960,7 +1124,7 @@ class ReferenceChange(Change):
sha1s.reverse()
tot = len(sha1s)
new_revisions = [
- Revision(self, GitObject(sha1), num=i+1, tot=tot)
+ Revision(self, GitObject(sha1), num=i + 1, tot=tot)
for (i, sha1) in enumerate(sha1s)
]
@@ -973,9 +1137,8 @@ class ReferenceChange(Change):
BRIEF_SUMMARY_TEMPLATE, action='new', text=subject,
)
yield '\n'
- for line in self.expand_lines(NEW_REVISIONS_TEMPLATE, tot=tot):
- yield line
- for line in self.generate_revision_change_log([r.rev.sha1 for r in new_revisions]):
+ for line in self.generate_new_revision_summary(
+ tot, [r.rev.sha1 for r in new_revisions], push):
yield line
else:
for line in self.expand_lines(NO_NEW_REVISIONS_TEMPLATE):
@@ -993,16 +1156,16 @@ class ReferenceChange(Change):
# revisions in the summary even though we will not send
# new notification emails for them.
adds = list(generate_summaries(
- '--topo-order', '--reverse', '%s..%s'
- % (self.old.commit_sha1, self.new.commit_sha1,)
- ))
+ '--topo-order', '--reverse', '%s..%s'
+ % (self.old.commit_sha1, self.new.commit_sha1,)
+ ))
# List of the revisions that were removed from the branch
# by this update. This will be empty except for
# non-fast-forward updates.
discards = list(generate_summaries(
- '%s..%s' % (self.new.commit_sha1, self.old.commit_sha1,)
- ))
+ '%s..%s' % (self.new.commit_sha1, self.old.commit_sha1,)
+ ))
if adds:
new_commits_list = push.get_new_commits(self)
@@ -1071,13 +1234,14 @@ class ReferenceChange(Change):
yield '\n'
if new_commits:
- for line in self.expand_lines(NEW_REVISIONS_TEMPLATE, tot=len(new_commits)):
- yield line
- for line in self.generate_revision_change_log(new_commits_list):
+ for line in self.generate_new_revision_summary(
+ len(new_commits), new_commits_list, push):
yield line
else:
for line in self.expand_lines(NO_NEW_REVISIONS_TEMPLATE):
yield line
+ for line in self.generate_revision_change_graph(push):
+ yield line
# The diffstat is shown from the old revision to the new
# revision. This is to show the truth of what happened in
@@ -1089,11 +1253,11 @@ class ReferenceChange(Change):
yield '\n'
yield 'Summary of changes:\n'
for line in read_git_lines(
- ['diff-tree']
- + self.diffopts
- + ['%s..%s' % (self.old.commit_sha1, self.new.commit_sha1,)],
- keepends=True,
- ):
+ ['diff-tree']
+ + self.diffopts
+ + ['%s..%s' % (self.old.commit_sha1, self.new.commit_sha1,)],
+ keepends=True,
+ ):
yield line
elif self.old.commit_sha1 and not self.new.commit_sha1:
@@ -1103,7 +1267,7 @@ class ReferenceChange(Change):
sha1s = list(push.get_discarded_commits(self))
tot = len(sha1s)
discarded_revisions = [
- Revision(self, GitObject(sha1), num=i+1, tot=tot)
+ Revision(self, GitObject(sha1), num=i + 1, tot=tot)
for (i, sha1) in enumerate(sha1s)
]
@@ -1116,6 +1280,8 @@ class ReferenceChange(Change):
yield r.expand(
BRIEF_SUMMARY_TEMPLATE, action='discards', text=subject,
)
+ for line in self.generate_revision_change_graph(push):
+ yield line
else:
for line in self.expand_lines(NO_DISCARDED_REVISIONS_TEMPLATE):
yield line
@@ -1161,6 +1327,150 @@ class BranchChange(ReferenceChange):
old=old, new=new, rev=rev,
)
self.recipients = environment.get_refchange_recipients(self)
+ self._single_revision = None
+
+ def send_single_combined_email(self, known_added_sha1s):
+ if not self.environment.combine_when_single_commit:
+ return None
+
+ # In the sadly-all-too-frequent usecase of people pushing only
+ # one of their commits at a time to a repository, users feel
+ # the reference change summary emails are noise rather than
+ # important signal. This is because, in this particular
+ # usecase, there is a reference change summary email for each
+ # new commit, and all these summaries do is point out that
+ # there is one new commit (which can readily be inferred by
+ # the existence of the individual revision email that is also
+ # sent). In such cases, our users prefer there to be a combined
+ # reference change summary/new revision email.
+ #
+ # So, if the change is an update and it doesn't discard any
+ # commits, and it adds exactly one non-merge commit (gerrit
+ # forces a workflow where every commit is individually merged
+ # and the git-multimail hook fired off for just this one
+ # change), then we send a combined refchange/revision email.
+ try:
+ # If this change is a reference update that doesn't discard
+ # any commits...
+ if self.change_type != 'update':
+ return None
+
+ if read_git_lines(
+ ['merge-base', self.old.sha1, self.new.sha1]
+ ) != [self.old.sha1]:
+ return None
+
+ # Check if this update introduced exactly one non-merge
+ # commit:
+
+ def split_line(line):
+ """Split line into (sha1, [parent,...])."""
+
+ words = line.split()
+ return (words[0], words[1:])
+
+ # Get the new commits introduced by the push as a list of
+ # (sha1, [parent,...])
+ new_commits = [
+ split_line(line)
+ for line in read_git_lines(
+ [
+ 'log', '-3', '--format=%H %P',
+ '%s..%s' % (self.old.sha1, self.new.sha1),
+ ]
+ )
+ ]
+
+ if not new_commits:
+ return None
+
+ # If the newest commit is a merge, save it for a later check
+ # but otherwise ignore it
+ merge = None
+ tot = len(new_commits)
+ if len(new_commits[0][1]) > 1:
+ merge = new_commits[0][0]
+ del new_commits[0]
+
+ # Our primary check: we can't combine if more than one commit
+ # is introduced. We also currently only combine if the new
+ # commit is a non-merge commit, though it may make sense to
+ # combine if it is a merge as well.
+ if not (
+ len(new_commits) == 1
+ and len(new_commits[0][1]) == 1
+ and new_commits[0][0] in known_added_sha1s
+ ):
+ return None
+
+ # We do not want to combine revision and refchange emails if
+ # those go to separate locations.
+ rev = Revision(self, GitObject(new_commits[0][0]), 1, tot)
+ if rev.recipients != self.recipients:
+ return None
+
+ # We ignored the newest commit if it was just a merge of the one
+ # commit being introduced. But we don't want to ignore that
+ # merge commit it it involved conflict resolutions. Check that.
+ if merge and merge != read_git_output(['diff-tree', '--cc', merge]):
+ return None
+
+ # We can combine the refchange and one new revision emails
+ # into one. Return the Revision that a combined email should
+ # be sent about.
+ return rev
+ except CommandError:
+ # Cannot determine number of commits in old..new or new..old;
+ # don't combine reference/revision emails:
+ return None
+
+ def generate_combined_email(self, push, revision, body_filter=None, extra_header_values={}):
+ values = revision.get_values()
+ if extra_header_values:
+ values.update(extra_header_values)
+ if 'subject' not in extra_header_values:
+ values['subject'] = self.expand(COMBINED_REFCHANGE_REVISION_SUBJECT_TEMPLATE, **values)
+
+ self._single_revision = revision
+ self.header_template = COMBINED_HEADER_TEMPLATE
+ self.intro_template = COMBINED_INTRO_TEMPLATE
+ self.footer_template = COMBINED_FOOTER_TEMPLATE
+ for line in self.generate_email(push, body_filter, values):
+ yield line
+
+ def generate_email_body(self, push):
+ '''Call the appropriate body generation routine.
+
+ If this is a combined refchange/revision email, the special logic
+ for handling this combined email comes from this function. For
+ other cases, we just use the normal handling.'''
+
+ # If self._single_revision isn't set; don't override
+ if not self._single_revision:
+ for line in super(BranchChange, self).generate_email_body(push):
+ yield line
+ return
+
+ # This is a combined refchange/revision email; we first provide
+ # some info from the refchange portion, and then call the revision
+ # generate_email_body function to handle the revision portion.
+ adds = list(generate_summaries(
+ '--topo-order', '--reverse', '%s..%s'
+ % (self.old.commit_sha1, self.new.commit_sha1,)
+ ))
+
+ yield self.expand("The following commit(s) were added to %(refname)s by this push:\n")
+ for (sha1, subject) in adds:
+ yield self.expand(
+ BRIEF_SUMMARY_TEMPLATE, action='new',
+ rev_short=sha1, text=subject,
+ )
+
+ yield self._single_revision.rev.short + " is described below\n"
+ yield '\n'
+
+ for line in self._single_revision.generate_email_body(push):
+ yield line
class AnnotatedTagChange(ReferenceChange):
@@ -1390,13 +1700,17 @@ class SendMailer(Mailer):
sys.exit(1)
try:
p.stdin.writelines(lines)
- except:
+ except Exception, e:
sys.stderr.write(
'*** Error while generating commit email\n'
'*** - mail sending aborted.\n'
)
- p.terminate()
- raise
+ try:
+ # subprocess.terminate() is not available in Python 2.4
+ p.terminate()
+ except AttributeError:
+ pass
+ raise e
else:
p.stdin.close()
retcode = p.wait()
@@ -1407,34 +1721,72 @@ class SendMailer(Mailer):
class SMTPMailer(Mailer):
"""Send emails using Python's smtplib."""
- def __init__(self, envelopesender, smtpserver):
+ def __init__(self, envelopesender, smtpserver,
+ smtpservertimeout=10.0, smtpserverdebuglevel=0,
+ smtpencryption='none',
+ smtpuser='', smtppass='',
+ ):
if not envelopesender:
sys.stderr.write(
'fatal: git_multimail: cannot use SMTPMailer without a sender address.\n'
'please set either multimailhook.envelopeSender or user.email\n'
)
sys.exit(1)
+ if smtpencryption == 'ssl' and not (smtpuser and smtppass):
+ raise ConfigurationException(
+ 'Cannot use SMTPMailer with security option ssl '
+ 'without options username and password.'
+ )
self.envelopesender = envelopesender
self.smtpserver = smtpserver
+ self.smtpservertimeout = smtpservertimeout
+ self.smtpserverdebuglevel = smtpserverdebuglevel
+ self.security = smtpencryption
+ self.username = smtpuser
+ self.password = smtppass
try:
- self.smtp = smtplib.SMTP(self.smtpserver)
+ if self.security == 'none':
+ self.smtp = smtplib.SMTP(self.smtpserver, timeout=self.smtpservertimeout)
+ elif self.security == 'ssl':
+ self.smtp = smtplib.SMTP_SSL(self.smtpserver, timeout=self.smtpservertimeout)
+ elif self.security == 'tls':
+ if ':' not in self.smtpserver:
+ self.smtpserver += ':587' # default port for TLS
+ self.smtp = smtplib.SMTP(self.smtpserver, timeout=self.smtpservertimeout)
+ self.smtp.ehlo()
+ self.smtp.starttls()
+ self.smtp.ehlo()
+ else:
+ sys.stdout.write('*** Error: Control reached an invalid option. ***')
+ sys.exit(1)
+ if self.smtpserverdebuglevel > 0:
+ sys.stdout.write(
+ "*** Setting debug on for SMTP server connection (%s) ***\n"
+ % self.smtpserverdebuglevel)
+ self.smtp.set_debuglevel(self.smtpserverdebuglevel)
except Exception, e:
- sys.stderr.write('*** Error establishing SMTP connection to %s***\n' % self.smtpserver)
+ sys.stderr.write(
+ '*** Error establishing SMTP connection to %s ***\n'
+ % self.smtpserver)
sys.stderr.write('*** %s\n' % str(e))
sys.exit(1)
def __del__(self):
- self.smtp.quit()
+ if hasattr(self, 'smtp'):
+ self.smtp.quit()
def send(self, lines, to_addrs):
try:
+ if self.username or self.password:
+ sys.stderr.write("*** Authenticating as %s ***\n" % self.username)
+ self.smtp.login(self.username, self.password)
msg = ''.join(lines)
# turn comma-separated list into Python list if needed.
if isinstance(to_addrs, basestring):
to_addrs = [email for (name, email) in getaddresses([to_addrs])]
self.smtp.sendmail(self.envelopesender, to_addrs, msg)
except Exception, e:
- sys.stderr.write('*** Error sending email***\n')
+ sys.stderr.write('*** Error sending email ***\n')
sys.stderr.write('*** %s\n' % str(e))
self.smtp.quit()
sys.exit(1)
@@ -1549,6 +1901,10 @@ class Environment(object):
True iff announce emails should include a shortlog.
+ refchange_showgraph (bool)
+
+ True iff refchanges emails should include a detailed graph.
+
refchange_showlog (bool)
True iff refchanges emails should include a detailed log.
@@ -1559,6 +1915,12 @@ class Environment(object):
summary email. The value should be a list of strings
representing words to be passed to the command.
+ graphopts (list of strings)
+
+ Analogous to diffopts, but contains options passed to
+ 'git log --graph' when generating the detailed graph for
+ a set of commits (see refchange_showgraph)
+
logopts (list of strings)
Analogous to diffopts, but contains options passed to
@@ -1571,6 +1933,17 @@ class Environment(object):
commit mail. The value should be a list of strings
representing words to be passed to the command.
+ quiet (bool)
+ On success do not write to stderr
+
+ stdout (bool)
+ Write email to stdout rather than emailing. Useful for debugging
+
+ combine_when_single_commit (bool)
+
+ True if a combined email should be produced when a single
+ new commit is pushed to a branch, False otherwise.
+
"""
REPO_NAME_RE = re.compile(r'^(?P<name>.+?)(?:\.git)$')
@@ -1580,9 +1953,14 @@ class Environment(object):
self.announce_show_shortlog = False
self.maxcommitemails = 500
self.diffopts = ['--stat', '--summary', '--find-copies-harder']
+ self.graphopts = ['--oneline', '--decorate']
self.logopts = []
+ self.refchange_showgraph = False
self.refchange_showlog = False
self.commitlogopts = ['-C', '--stat', '-p', '--cc']
+ self.quiet = False
+ self.stdout = False
+ self.combine_when_single_commit = True
self.COMPUTED_KEYS = [
'administrator',
@@ -1614,6 +1992,14 @@ class Environment(object):
def get_pusher_email(self):
return None
+ def get_fromaddr(self):
+ config = Config('user')
+ fromname = config.get('name', default='')
+ fromemail = config.get('email', default='')
+ if fromemail:
+ return formataddr([fromname, fromemail])
+ return self.get_sender()
+
def get_administrator(self):
return 'the administrator of this repository'
@@ -1631,7 +2017,7 @@ class Environment(object):
return CHARSET
def get_values(self):
- """Return a dictionary {keyword : expansion} for this Environment.
+ """Return a dictionary {keyword: expansion} for this Environment.
This method is called by Change._compute_values(). The keys
in the returned dictionary are available to be used in any of
@@ -1699,6 +2085,24 @@ class Environment(object):
return lines
+ def log_msg(self, msg):
+ """Write the string msg on a log file or on stderr.
+
+ Sends the text to stderr by default, override to change the behavior."""
+ sys.stderr.write(msg)
+
+ def log_warning(self, msg):
+ """Write the string msg on a log file or on stderr.
+
+ Sends the text to stderr by default, override to change the behavior."""
+ sys.stderr.write(msg)
+
+ def log_error(self, msg):
+ """Write the string msg on a log file or on stderr.
+
+ Sends the text to stderr by default, override to change the behavior."""
+ sys.stderr.write(msg)
+
class ConfigEnvironmentMixin(Environment):
"""A mixin that sets self.config to its constructor's config argument.
@@ -1723,20 +2127,23 @@ class ConfigOptionsEnvironmentMixin(ConfigEnvironmentMixin):
config=config, **kw
)
- self.announce_show_shortlog = config.get_bool(
- 'announceshortlog', default=self.announce_show_shortlog
- )
-
- self.refchange_showlog = config.get_bool(
- 'refchangeshowlog', default=self.refchange_showlog
- )
+ for var, cfg in (
+ ('announce_show_shortlog', 'announceshortlog'),
+ ('refchange_showgraph', 'refchangeShowGraph'),
+ ('refchange_showlog', 'refchangeshowlog'),
+ ('quiet', 'quiet'),
+ ('stdout', 'stdout'),
+ ):
+ val = config.get_bool(cfg)
+ if val is not None:
+ setattr(self, var, val)
maxcommitemails = config.get('maxcommitemails')
if maxcommitemails is not None:
try:
self.maxcommitemails = int(maxcommitemails)
except ValueError:
- sys.stderr.write(
+ self.log_warning(
'*** Malformed value for multimailhook.maxCommitEmails: %s\n' % maxcommitemails
+ '*** Expected a number. Ignoring.\n'
)
@@ -1745,6 +2152,10 @@ class ConfigOptionsEnvironmentMixin(ConfigEnvironmentMixin):
if diffopts is not None:
self.diffopts = shlex.split(diffopts)
+ graphopts = config.get('graphOpts')
+ if graphopts is not None:
+ self.graphopts = shlex.split(graphopts)
+
logopts = config.get('logopts')
if logopts is not None:
self.logopts = shlex.split(logopts)
@@ -1756,14 +2167,18 @@ class ConfigOptionsEnvironmentMixin(ConfigEnvironmentMixin):
reply_to = config.get('replyTo')
self.__reply_to_refchange = config.get('replyToRefchange', default=reply_to)
if (
- self.__reply_to_refchange is not None
- and self.__reply_to_refchange.lower() == 'author'
- ):
+ self.__reply_to_refchange is not None
+ and self.__reply_to_refchange.lower() == 'author'
+ ):
raise ConfigurationException(
'"author" is not an allowed setting for replyToRefchange'
)
self.__reply_to_commit = config.get('replyToCommit', default=reply_to)
+ combine = config.get_bool('combineWhenSingleCommit')
+ if combine is not None:
+ self.combine_when_single_commit = combine
+
def get_administrator(self):
return (
self.config.get('administrator')
@@ -1779,8 +2194,12 @@ class ConfigOptionsEnvironmentMixin(ConfigEnvironmentMixin):
def get_emailprefix(self):
emailprefix = self.config.get('emailprefix')
- if emailprefix and emailprefix.strip():
- return emailprefix.strip() + ' '
+ if emailprefix is not None:
+ emailprefix = emailprefix.strip()
+ if emailprefix:
+ return emailprefix + ' '
+ else:
+ return ''
else:
return '[%s] ' % (self.get_repo_shortname(),)
@@ -1791,14 +2210,7 @@ class ConfigOptionsEnvironmentMixin(ConfigEnvironmentMixin):
fromaddr = self.config.get('from')
if fromaddr:
return fromaddr
- else:
- config = Config('user')
- fromname = config.get('name', default='')
- fromemail = config.get('email', default='')
- if fromemail:
- return formataddr([fromname, fromemail])
- else:
- return self.get_sender()
+ return super(ConfigOptionsEnvironmentMixin, self).get_fromaddr()
def get_reply_to_refchange(self, refchange):
if self.__reply_to_refchange is None:
@@ -1814,7 +2226,7 @@ class ConfigOptionsEnvironmentMixin(ConfigEnvironmentMixin):
if self.__reply_to_commit is None:
return super(ConfigOptionsEnvironmentMixin, self).get_reply_to_commit(revision)
elif self.__reply_to_commit.lower() == 'author':
- return revision.get_author()
+ return revision.author
elif self.__reply_to_commit.lower() == 'pusher':
return self.get_pusher_email()
elif self.__reply_to_commit.lower() == 'none':
@@ -1822,6 +2234,9 @@ class ConfigOptionsEnvironmentMixin(ConfigEnvironmentMixin):
else:
return self.__reply_to_commit
+ def get_scancommitforcc(self):
+ return self.config.get('scancommitforcc')
+
class FilterLinesEnvironmentMixin(Environment):
"""Handle encoding and maximum line length of body lines.
@@ -1862,9 +2277,9 @@ class FilterLinesEnvironmentMixin(Environment):
class ConfigFilterLinesEnvironmentMixin(
- ConfigEnvironmentMixin,
- FilterLinesEnvironmentMixin,
- ):
+ ConfigEnvironmentMixin,
+ FilterLinesEnvironmentMixin,
+ ):
"""Handle encoding and maximum line length based on config."""
def __init__(self, config, **kw):
@@ -1896,9 +2311,9 @@ class MaxlinesEnvironmentMixin(Environment):
class ConfigMaxlinesEnvironmentMixin(
- ConfigEnvironmentMixin,
- MaxlinesEnvironmentMixin,
- ):
+ ConfigEnvironmentMixin,
+ MaxlinesEnvironmentMixin,
+ ):
"""Limit the email body to the number of lines specified in config."""
def __init__(self, config, **kw):
@@ -1927,9 +2342,9 @@ class FQDNEnvironmentMixin(Environment):
class ConfigFQDNEnvironmentMixin(
- ConfigEnvironmentMixin,
- FQDNEnvironmentMixin,
- ):
+ ConfigEnvironmentMixin,
+ FQDNEnvironmentMixin,
+ ):
"""Read the FQDN from the config."""
def __init__(self, config, **kw):
@@ -1970,10 +2385,10 @@ class StaticRecipientsEnvironmentMixin(Environment):
"""Set recipients statically based on constructor parameters."""
def __init__(
- self,
- refchange_recipients, announce_recipients, revision_recipients,
- **kw
- ):
+ self,
+ refchange_recipients, announce_recipients, revision_recipients, scancommitforcc,
+ **kw
+ ):
super(StaticRecipientsEnvironmentMixin, self).__init__(**kw)
# The recipients for various types of notification emails, as
@@ -1985,7 +2400,8 @@ class StaticRecipientsEnvironmentMixin(Environment):
# compute them once and for all:
if not (refchange_recipients
or announce_recipients
- or revision_recipients):
+ or revision_recipients
+ or scancommitforcc):
raise ConfigurationException('No email recipients configured!')
self.__refchange_recipients = refchange_recipients
self.__announce_recipients = announce_recipients
@@ -2002,9 +2418,9 @@ class StaticRecipientsEnvironmentMixin(Environment):
class ConfigRecipientsEnvironmentMixin(
- ConfigEnvironmentMixin,
- StaticRecipientsEnvironmentMixin
- ):
+ ConfigEnvironmentMixin,
+ StaticRecipientsEnvironmentMixin
+ ):
"""Determine recipients statically based on config."""
def __init__(self, config, **kw):
@@ -2019,6 +2435,7 @@ class ConfigRecipientsEnvironmentMixin(
revision_recipients=self._get_recipients(
config, 'commitlist', 'mailinglist',
),
+ scancommitforcc=config.get('scancommitforcc'),
**kw
)
@@ -2067,20 +2484,20 @@ class ProjectdescEnvironmentMixin(Environment):
class GenericEnvironmentMixin(Environment):
def get_pusher(self):
- return self.osenv.get('USER', 'unknown user')
+ return self.osenv.get('USER', self.osenv.get('USERNAME', 'unknown user'))
class GenericEnvironment(
- ProjectdescEnvironmentMixin,
- ConfigMaxlinesEnvironmentMixin,
- ComputeFQDNEnvironmentMixin,
- ConfigFilterLinesEnvironmentMixin,
- ConfigRecipientsEnvironmentMixin,
- PusherDomainEnvironmentMixin,
- ConfigOptionsEnvironmentMixin,
- GenericEnvironmentMixin,
- Environment,
- ):
+ ProjectdescEnvironmentMixin,
+ ConfigMaxlinesEnvironmentMixin,
+ ComputeFQDNEnvironmentMixin,
+ ConfigFilterLinesEnvironmentMixin,
+ ConfigRecipientsEnvironmentMixin,
+ PusherDomainEnvironmentMixin,
+ ConfigOptionsEnvironmentMixin,
+ GenericEnvironmentMixin,
+ Environment,
+ ):
pass
@@ -2097,6 +2514,45 @@ class GitoliteEnvironmentMixin(Environment):
def get_pusher(self):
return self.osenv.get('GL_USER', 'unknown user')
+ def get_fromaddr(self):
+ GL_USER = self.osenv.get('GL_USER')
+ if GL_USER is not None:
+ # Find the path to gitolite.conf. Note that gitolite v3
+ # did away with the GL_ADMINDIR and GL_CONF environment
+ # variables (they are now hard-coded).
+ GL_ADMINDIR = self.osenv.get(
+ 'GL_ADMINDIR',
+ os.path.expanduser(os.path.join('~', '.gitolite')))
+ GL_CONF = self.osenv.get(
+ 'GL_CONF',
+ os.path.join(GL_ADMINDIR, 'conf', 'gitolite.conf'))
+ if os.path.isfile(GL_CONF):
+ f = open(GL_CONF, 'rU')
+ try:
+ in_user_emails_section = False
+ re_template = r'^\s*#\s*{}\s*$'
+ re_begin, re_user, re_end = (
+ re.compile(re_template.format(x))
+ for x in (
+ r'BEGIN\s+USER\s+EMAILS',
+ re.escape(GL_USER) + r'\s+(.*)',
+ r'END\s+USER\s+EMAILS',
+ ))
+ for l in f:
+ l = l.rstrip('\n')
+ if not in_user_emails_section:
+ if re_begin.match(l):
+ in_user_emails_section = True
+ continue
+ if re_end.match(l):
+ break
+ m = re_user.match(l)
+ if m:
+ return m.group(1)
+ finally:
+ f.close()
+ return super(GitoliteEnvironmentMixin, self).get_fromaddr()
+
class IncrementalDateTime(object):
"""Simple wrapper to give incremental date/times.
@@ -2116,16 +2572,16 @@ class IncrementalDateTime(object):
class GitoliteEnvironment(
- ProjectdescEnvironmentMixin,
- ConfigMaxlinesEnvironmentMixin,
- ComputeFQDNEnvironmentMixin,
- ConfigFilterLinesEnvironmentMixin,
- ConfigRecipientsEnvironmentMixin,
- PusherDomainEnvironmentMixin,
- ConfigOptionsEnvironmentMixin,
- GitoliteEnvironmentMixin,
- Environment,
- ):
+ ProjectdescEnvironmentMixin,
+ ConfigMaxlinesEnvironmentMixin,
+ ComputeFQDNEnvironmentMixin,
+ ConfigFilterLinesEnvironmentMixin,
+ ConfigRecipientsEnvironmentMixin,
+ PusherDomainEnvironmentMixin,
+ ConfigOptionsEnvironmentMixin,
+ GitoliteEnvironmentMixin,
+ Environment,
+ ):
pass
@@ -2149,9 +2605,9 @@ class Push(object):
references.
The first step is to determine the "other" references--those
- unaffected by the current push. They are computed by
- Push._compute_other_ref_sha1s() by listing all references then
- removing any affected by this push.
+ unaffected by the current push. They are computed by listing all
+ references then removing any affected by this push. The results
+ are stored in Push._other_ref_sha1s.
The commits contained in the repository before this push were
@@ -2187,7 +2643,7 @@ class Push(object):
possible and working with SHA1s thereafter (because SHA1s are
immutable)."""
- # A map {(changeclass, changetype) : integer} specifying the order
+ # A map {(changeclass, changetype): integer} specifying the order
# that reference changes will be processed if multiple reference
# changes are included in a single push. The order is significant
# mostly because new commit notifications are threaded together
@@ -2211,66 +2667,134 @@ class Push(object):
])
)
- def __init__(self, changes):
+ def __init__(self, changes, ignore_other_refs=False):
self.changes = sorted(changes, key=self._sort_key)
+ self.__other_ref_sha1s = None
+ self.__cached_commits_spec = {}
- # The SHA-1s of commits referred to by references unaffected
- # by this push:
- other_ref_sha1s = self._compute_other_ref_sha1s()
+ if ignore_other_refs:
+ self.__other_ref_sha1s = set()
- self._old_rev_exclusion_spec = self._compute_rev_exclusion_spec(
- other_ref_sha1s.union(
- change.old.sha1
+ @classmethod
+ def _sort_key(klass, change):
+ return (klass.SORT_ORDER[change.__class__, change.change_type], change.refname,)
+
+ @property
+ def _other_ref_sha1s(self):
+ """The GitObjects referred to by references unaffected by this push.
+ """
+ if self.__other_ref_sha1s is None:
+ # The refnames being changed by this push:
+ updated_refs = set(
+ change.refname
for change in self.changes
- if change.old.type in ['commit', 'tag']
)
- )
- self._new_rev_exclusion_spec = self._compute_rev_exclusion_spec(
- other_ref_sha1s.union(
- change.new.sha1
- for change in self.changes
- if change.new.type in ['commit', 'tag']
+
+ # The SHA-1s of commits referred to by all references in this
+ # repository *except* updated_refs:
+ sha1s = set()
+ fmt = (
+ '%(objectname) %(objecttype) %(refname)\n'
+ '%(*objectname) %(*objecttype) %(refname)'
)
- )
+ for line in read_git_lines(
+ ['for-each-ref', '--format=%s' % (fmt,)]):
+ (sha1, type, name) = line.split(' ', 2)
+ if sha1 and type == 'commit' and name not in updated_refs:
+ sha1s.add(sha1)
- @classmethod
- def _sort_key(klass, change):
- return (klass.SORT_ORDER[change.__class__, change.change_type], change.refname,)
+ self.__other_ref_sha1s = sha1s
+
+ return self.__other_ref_sha1s
+
+ def _get_commits_spec_incl(self, new_or_old, reference_change=None):
+ """Get new or old SHA-1 from one or each of the changed refs.
- def _compute_other_ref_sha1s(self):
- """Return the GitObjects referred to by references unaffected by this push."""
+ Return a list of SHA-1 commit identifier strings suitable as
+ arguments to 'git rev-list' (or 'git log' or ...). The
+ returned identifiers are either the old or new values from one
+ or all of the changed references, depending on the values of
+ new_or_old and reference_change.
- # The refnames being changed by this push:
- updated_refs = set(
- change.refname
+ new_or_old is either the string 'new' or the string 'old'. If
+ 'new', the returned SHA-1 identifiers are the new values from
+ each changed reference. If 'old', the SHA-1 identifiers are
+ the old values from each changed reference.
+
+ If reference_change is specified and not None, only the new or
+ old reference from the specified reference is included in the
+ return value.
+
+ This function returns None if there are no matching revisions
+ (e.g., because a branch was deleted and new_or_old is 'new').
+ """
+
+ if not reference_change:
+ incl_spec = sorted(
+ getattr(change, new_or_old).sha1
+ for change in self.changes
+ if getattr(change, new_or_old)
+ )
+ if not incl_spec:
+ incl_spec = None
+ elif not getattr(reference_change, new_or_old).commit_sha1:
+ incl_spec = None
+ else:
+ incl_spec = [getattr(reference_change, new_or_old).commit_sha1]
+ return incl_spec
+
+ def _get_commits_spec_excl(self, new_or_old):
+ """Get exclusion revisions for determining new or discarded commits.
+
+ Return a list of strings suitable as arguments to 'git
+ rev-list' (or 'git log' or ...) that will exclude all
+ commits that, depending on the value of new_or_old, were
+ either previously in the repository (useful for determining
+ which commits are new to the repository) or currently in the
+ repository (useful for determining which commits were
+ discarded from the repository).
+
+ new_or_old is either the string 'new' or the string 'old'. If
+ 'new', the commits to be excluded are those that were in the
+ repository before the push. If 'old', the commits to be
+ excluded are those that are currently in the repository. """
+
+ old_or_new = {'old': 'new', 'new': 'old'}[new_or_old]
+ excl_revs = self._other_ref_sha1s.union(
+ getattr(change, old_or_new).sha1
for change in self.changes
+ if getattr(change, old_or_new).type in ['commit', 'tag']
)
+ return ['^' + sha1 for sha1 in sorted(excl_revs)]
- # The SHA-1s of commits referred to by all references in this
- # repository *except* updated_refs:
- sha1s = set()
- fmt = (
- '%(objectname) %(objecttype) %(refname)\n'
- '%(*objectname) %(*objecttype) %(refname)'
- )
- for line in read_git_lines(['for-each-ref', '--format=%s' % (fmt,)]):
- (sha1, type, name) = line.split(' ', 2)
- if sha1 and type == 'commit' and name not in updated_refs:
- sha1s.add(sha1)
+ def get_commits_spec(self, new_or_old, reference_change=None):
+ """Get rev-list arguments for added or discarded commits.
- return sha1s
+ Return a list of strings suitable as arguments to 'git
+ rev-list' (or 'git log' or ...) that select those commits
+ that, depending on the value of new_or_old, are either new to
+ the repository or were discarded from the repository.
- def _compute_rev_exclusion_spec(self, sha1s):
- """Return an exclusion specification for 'git rev-list'.
+ new_or_old is either the string 'new' or the string 'old'. If
+ 'new', the returned list is used to select commits that are
+ new to the repository. If 'old', the returned value is used
+ to select the commits that have been discarded from the
+ repository.
- git_objects is an iterable over GitObject instances. Return a
- string that can be passed to the standard input of 'git
- rev-list --stdin' to exclude all of the commits referred to by
- git_objects."""
+ If reference_change is specified and not None, the new or
+ discarded commits are limited to those that are reachable from
+ the new or old value of the specified reference.
- return ''.join(
- ['^%s\n' % (sha1,) for sha1 in sorted(sha1s)]
- )
+ This function returns None if there are no added (or discarded)
+ revisions.
+ """
+ key = (new_or_old, reference_change)
+ if key not in self.__cached_commits_spec:
+ ret = self._get_commits_spec_incl(new_or_old, reference_change)
+ if ret is not None:
+ ret.extend(self._get_commits_spec_excl(new_or_old))
+ self.__cached_commits_spec[key] = ret
+ return self.__cached_commits_spec[key]
def get_new_commits(self, reference_change=None):
"""Return a list of commits added by this push.
@@ -2280,19 +2804,8 @@ class Push(object):
reference_change is None, then return a list of *all* commits
added by this push."""
- if not reference_change:
- new_revs = sorted(
- change.new.sha1
- for change in self.changes
- if change.new
- )
- elif not reference_change.new.commit_sha1:
- return []
- else:
- new_revs = [reference_change.new.commit_sha1]
-
- cmd = ['rev-list', '--stdin'] + new_revs
- return read_git_lines(cmd, input=self._old_rev_exclusion_spec)
+ spec = self.get_commits_spec('new', reference_change)
+ return git_rev_list(spec)
def get_discarded_commits(self, reference_change):
"""Return a list of commits discarded by this push.
@@ -2301,13 +2814,8 @@ class Push(object):
entirely discarded from the repository by the part of this
push represented by reference_change."""
- if not reference_change.old.commit_sha1:
- return []
- else:
- old_revs = [reference_change.old.commit_sha1]
-
- cmd = ['rev-list', '--stdin'] + old_revs
- return read_git_lines(cmd, input=self._new_rev_exclusion_spec)
+ spec = self.get_commits_spec('old', reference_change)
+ return git_rev_list(spec)
def send_emails(self, mailer, body_filter=None):
"""Use send all of the notification emails needed for this push.
@@ -2325,30 +2833,43 @@ class Push(object):
unhandled_sha1s = set(self.get_new_commits())
send_date = IncrementalDateTime()
for change in self.changes:
+ sha1s = []
+ for sha1 in reversed(list(self.get_new_commits(change))):
+ if sha1 in unhandled_sha1s:
+ sha1s.append(sha1)
+ unhandled_sha1s.remove(sha1)
+
# Check if we've got anyone to send to
if not change.recipients:
- sys.stderr.write(
+ change.environment.log_warning(
'*** no recipients configured so no email will be sent\n'
'*** for %r update %s->%s\n'
% (change.refname, change.old.sha1, change.new.sha1,)
)
else:
- sys.stderr.write('Sending notification emails to: %s\n' % (change.recipients,))
- extra_values = {'send_date' : send_date.next()}
- mailer.send(
- change.generate_email(self, body_filter, extra_values),
- change.recipients,
- )
+ if not change.environment.quiet:
+ change.environment.log_msg(
+ 'Sending notification emails to: %s\n' % (change.recipients,))
+ extra_values = {'send_date': send_date.next()}
- sha1s = []
- for sha1 in reversed(list(self.get_new_commits(change))):
- if sha1 in unhandled_sha1s:
- sha1s.append(sha1)
- unhandled_sha1s.remove(sha1)
+ rev = change.send_single_combined_email(sha1s)
+ if rev:
+ mailer.send(
+ change.generate_combined_email(self, rev, body_filter, extra_values),
+ rev.recipients,
+ )
+ # This change is now fully handled; no need to handle
+ # individual revisions any further.
+ continue
+ else:
+ mailer.send(
+ change.generate_email(self, body_filter, extra_values),
+ change.recipients,
+ )
max_emails = change.environment.maxcommitemails
if max_emails and len(sha1s) > max_emails:
- sys.stderr.write(
+ change.environment.log_warning(
'*** Too many new commits (%d), not sending commit emails.\n' % len(sha1s)
+ '*** Try setting multimailhook.maxCommitEmails to a greater value\n'
+ '*** Currently, multimailhook.maxCommitEmails=%d\n' % max_emails
@@ -2356,9 +2877,13 @@ class Push(object):
return
for (num, sha1) in enumerate(sha1s):
- rev = Revision(change, GitObject(sha1), num=num+1, tot=len(sha1s))
+ rev = Revision(change, GitObject(sha1), num=num + 1, tot=len(sha1s))
+ if not rev.recipients and rev.cc_recipients:
+ change.environment.log_msg('*** Replacing Cc: with To:\n')
+ rev.recipients = rev.cc_recipients
+ rev.cc_recipients = None
if rev.recipients:
- extra_values = {'send_date' : send_date.next()}
+ extra_values = {'send_date': send_date.next()}
mailer.send(
rev.generate_email(self, body_filter, extra_values),
rev.recipients,
@@ -2366,7 +2891,7 @@ class Push(object):
# Consistency check:
if unhandled_sha1s:
- sys.stderr.write(
+ change.environment.log_error(
'ERROR: No emails were sent for the following new commits:\n'
' %s\n'
% ('\n '.join(sorted(unhandled_sha1s)),)
@@ -2384,7 +2909,7 @@ def run_as_post_receive_hook(environment, mailer):
push.send_emails(mailer, body_filter=environment.filter_body)
-def run_as_update_hook(environment, mailer, refname, oldrev, newrev):
+def run_as_update_hook(environment, mailer, refname, oldrev, newrev, force_send=False):
changes = [
ReferenceChange.create(
environment,
@@ -2393,7 +2918,7 @@ def run_as_update_hook(environment, mailer, refname, oldrev, newrev):
refname,
),
]
- push = Push(changes)
+ push = Push(changes, force_send)
push.send_emails(mailer, body_filter=environment.filter_body)
@@ -2402,9 +2927,18 @@ def choose_mailer(config, environment):
if mailer == 'smtp':
smtpserver = config.get('smtpserver', default='localhost')
+ smtpservertimeout = float(config.get('smtpservertimeout', default=10.0))
+ smtpserverdebuglevel = int(config.get('smtpserverdebuglevel', default=0))
+ smtpencryption = config.get('smtpencryption', default='none')
+ smtpuser = config.get('smtpuser', default='')
+ smtppass = config.get('smtppass', default='')
mailer = SMTPMailer(
envelopesender=(environment.get_sender() or environment.get_fromaddr()),
- smtpserver=smtpserver,
+ smtpserver=smtpserver, smtpservertimeout=smtpservertimeout,
+ smtpserverdebuglevel=smtpserverdebuglevel,
+ smtpencryption=smtpencryption,
+ smtpuser=smtpuser,
+ smtppass=smtppass,
)
elif mailer == 'sendmail':
command = config.get('sendmailcommand')
@@ -2412,7 +2946,7 @@ def choose_mailer(config, environment):
command = shlex.split(command)
mailer = SendMailer(command=command, envelopesender=environment.get_sender())
else:
- sys.stderr.write(
+ environment.log_error(
'fatal: multimailhook.mailer is set to an incorrect value: "%s"\n' % mailer
+ 'please use one of "smtp" or "sendmail".\n'
)
@@ -2421,8 +2955,8 @@ def choose_mailer(config, environment):
KNOWN_ENVIRONMENTS = {
- 'generic' : GenericEnvironmentMixin,
- 'gitolite' : GitoliteEnvironmentMixin,
+ 'generic': GenericEnvironmentMixin,
+ 'gitolite': GitoliteEnvironmentMixin,
}
@@ -2439,8 +2973,8 @@ def choose_environment(config, osenv=None, env=None, recipients=None):
ConfigOptionsEnvironmentMixin,
]
environment_kw = {
- 'osenv' : osenv,
- 'config' : config,
+ 'osenv': osenv,
+ 'config': config,
}
if not env:
@@ -2459,6 +2993,7 @@ def choose_environment(config, osenv=None, env=None, recipients=None):
environment_kw['refchange_recipients'] = recipients
environment_kw['announce_recipients'] = recipients
environment_kw['revision_recipients'] = recipients
+ environment_kw['scancommitforcc'] = config.get('scancommitforcc')
else:
environment_mixins.insert(0, ConfigRecipientsEnvironmentMixin)
@@ -2499,6 +3034,14 @@ def main(args):
'(intended for debugging purposes).'
),
)
+ parser.add_option(
+ '--force-send', action='store_true', default=False,
+ help=(
+ 'Force sending refchange email when using as an update hook. '
+ 'This is useful to work around the unreliable new commits '
+ 'detection in this mode.'
+ ),
+ )
(options, args) = parser.parse_args(args)
@@ -2513,11 +3056,11 @@ def main(args):
if options.show_env:
sys.stderr.write('Environment values:\n')
- for (k,v) in sorted(environment.get_values().items()):
- sys.stderr.write(' %s : %r\n' % (k,v))
+ for (k, v) in sorted(environment.get_values().items()):
+ sys.stderr.write(' %s : %r\n' % (k, v))
sys.stderr.write('\n')
- if options.stdout:
+ if options.stdout or environment.stdout:
mailer = OutputMailer(sys.stdout)
else:
mailer = choose_mailer(config, environment)
@@ -2528,7 +3071,7 @@ def main(args):
if len(args) != 3:
parser.error('Need zero or three non-option arguments')
(refname, oldrev, newrev) = args
- run_as_update_hook(environment, mailer, refname, oldrev, newrev)
+ run_as_update_hook(environment, mailer, refname, oldrev, newrev, options.force_send)
else:
run_as_post_receive_hook(environment, mailer)
except ConfigurationException, e:
diff --git a/contrib/hooks/multimail/migrate-mailhook-config b/contrib/hooks/multimail/migrate-mailhook-config
index 04eeaac..d0e9b39 100755
--- a/contrib/hooks/multimail/migrate-mailhook-config
+++ b/contrib/hooks/multimail/migrate-mailhook-config
@@ -22,6 +22,7 @@ OLD_NAMES = [
'showrev',
'emailmaxlines',
'diffopts',
+ 'scancommitforcc',
]
NEW_NAMES = [
@@ -38,6 +39,7 @@ NEW_NAMES = [
'emailmaxlines',
'diffopts',
'emaildomain',
+ 'scancommitforcc',
]
@@ -61,7 +63,7 @@ def _check_old_config_exists(old):
"""Check that at least one old configuration value is set."""
for name in OLD_NAMES:
- if old.has_key(name):
+ if name in old:
return True
return False
@@ -72,7 +74,7 @@ def _check_new_config_clear(new):
retval = True
for name in NEW_NAMES:
- if new.has_key(name):
+ if name in new:
if retval:
sys.stderr.write('INFO: The following configuration values already exist:\n\n')
sys.stderr.write(' "%s.%s"\n' % (new.section, name))
@@ -83,7 +85,7 @@ def _check_new_config_clear(new):
def erase_values(config, names):
for name in names:
- if config.has_key(name):
+ if name in config:
try:
sys.stderr.write('...unsetting "%s.%s"\n' % (config.section, name))
config.unset_all(name)
@@ -170,7 +172,7 @@ def migrate_config(strict=False, retain=False, overwrite=False):
)
name = 'showrev'
- if old.has_key(name):
+ if name in old:
msg = 'git-multimail does not support "%s.%s"' % (old.section, name,)
if strict:
sys.exit(
@@ -182,7 +184,7 @@ def migrate_config(strict=False, retain=False, overwrite=False):
sys.stderr.write('\nWARNING: %s (ignoring).\n\n' % (msg,))
for name in ['mailinglist', 'announcelist']:
- if old.has_key(name):
+ if name in old:
sys.stderr.write(
'...copying "%s.%s" to "%s.%s"\n' % (old.section, name, new.section, name)
)
@@ -198,15 +200,15 @@ def migrate_config(strict=False, retain=False, overwrite=False):
)
new.set('announceshortlog', 'true')
- for name in ['envelopesender', 'emailmaxlines', 'diffopts']:
- if old.has_key(name):
+ for name in ['envelopesender', 'emailmaxlines', 'diffopts', 'scancommitforcc']:
+ if name in old:
sys.stderr.write(
'...copying "%s.%s" to "%s.%s"\n' % (old.section, name, new.section, name)
)
new.set(name, old.get(name))
name = 'emailprefix'
- if old.has_key(name):
+ if name in old:
sys.stderr.write(
'...copying "%s.%s" to "%s.%s"\n' % (old.section, name, new.section, name)
)
diff --git a/contrib/hooks/multimail/post-receive b/contrib/hooks/multimail/post-receive.example
index 4d46828..43f7b6b 100755
--- a/contrib/hooks/multimail/post-receive
+++ b/contrib/hooks/multimail/post-receive.example
@@ -2,16 +2,18 @@
"""Example post-receive hook based on git-multimail.
-This script is a simple example of a post-receive hook implemented
-using git_multimail.py as a Python module. It is intended to be
-customized before use; see the comments in the script to help you get
-started.
+The simplest way to use git-multimail is to use the script
+git_multimail.py directly as a post-receive hook, and to configure it
+using Git's configuration files and command-line parameters. You can
+also write your own Python wrapper for more advanced configurability,
+using git_multimail.py as a Python module.
-It is possible to use git_multimail.py itself as a post-receive or
-update hook, configured via git config settings and/or command-line
-parameters. But for more flexibility, it can also be imported as a
-Python module by a custom post-receive script as done here. The
-latter has the following advantages:
+This script is a simple example of such a post-receive hook. It is
+intended to be customized before use; see the comments in the script
+to help you get started.
+
+Using git-multimail as a Python module as done here provides more
+flexibility. It has the following advantages:
* The tool's behavior can be customized using arbitrary Python code,
without having to edit git_multimail.py.
@@ -56,8 +58,11 @@ config = git_multimail.Config('multimailhook')
# Select the type of environment:
-environment = git_multimail.GenericEnvironment(config=config)
-#environment = git_multimail.GitoliteEnvironment(config=config)
+try:
+ environment = git_multimail.GenericEnvironment(config=config)
+ #environment = git_multimail.GitoliteEnvironment(config=config)
+except git_multimail.ConfigurationException, e:
+ sys.exit(str(e))
# Choose the method of sending emails based on the git config: