summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorChristian Couder <chriscool@tuxfamily.org>2008-08-22 03:52:22 (GMT)
committerJunio C Hamano <gitster@pobox.com>2008-08-28 01:08:04 (GMT)
commitf821d0892173e4e46a71fef4d06995f7a81c9296 (patch)
treea3bf9d92831f2d611a863617b785f2dda273b107
parenta1184d85e8752658f02746982822f43f32316803 (diff)
downloadgit-f821d0892173e4e46a71fef4d06995f7a81c9296.zip
git-f821d0892173e4e46a71fef4d06995f7a81c9296.tar.gz
git-f821d0892173e4e46a71fef4d06995f7a81c9296.tar.bz2
bisect: test merge base if good rev is not an ancestor of bad rev
Before this patch, "git bisect", when it was given some good revs that are not ancestor of the bad rev, didn't check if the merge bases were good. "git bisect" just supposed that the user knew what he was doing, and that, when he said the revs were good, he knew that it meant that all the revs in the history leading to the good revs were also considered good. But in pratice, the user may not know that a good rev is not an ancestor of the bad rev, or he may not know/remember that all revs leading to the good rev will be considered good. So he may give a good rev that is a sibling, instead of an ancestor, of the bad rev, when in fact there can be one rev becoming good in the branch of the good rev (because the bug was already fixed there, for example) instead of one rev becoming bad in the branch of the bad rev. For example, if there is the following history: A--B--C--D \ E--F and we launch "git bisect start D F" then only C and D would have been considered as possible first bad commit before this patch. This could invite user errors; F could be the commit that fixes the bug that exists everywhere else. The purpose of this patch is to detect when "git bisect" is passed some good revs that are not ancestors of the bad rev, and then to first ask the user to test the merge bases between the good and bad revs. If the merge bases are good then all is fine, we can continue bisecting. Otherwise, if one merge base is bad, it means that the assumption that all revs leading to the good one are good too is wrong and we error out. In the case where one merge base is skipped we issue a warning and then continue bisecting anyway. These checks will also catch the case where good and bad have been mistaken. This means that we can remove the check that was done latter on the output of "git rev-list --bisect-vars". Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
-rwxr-xr-xgit-bisect.sh127
-rwxr-xr-xt/t6030-bisect-porcelain.sh90
2 files changed, 192 insertions, 25 deletions
diff --git a/git-bisect.sh b/git-bisect.sh
index 97ac600..b314d47 100755
--- a/git-bisect.sh
+++ b/git-bisect.sh
@@ -243,33 +243,18 @@ bisect_auto_next() {
bisect_next_check && bisect_next || :
}
-eval_rev_list() {
- _eval="$1"
-
- eval $_eval
- res=$?
-
- if [ $res -ne 0 ]; then
- echo >&2 "'git rev-list --bisect-vars' failed:"
- echo >&2 "maybe you mistake good and bad revs?"
- exit $res
- fi
-
- return $res
-}
-
filter_skipped() {
_eval="$1"
_skip="$2"
if [ -z "$_skip" ]; then
- eval_rev_list "$_eval"
+ eval "$_eval"
return
fi
# Let's parse the output of:
# "git rev-list --bisect-vars --bisect-all ..."
- eval_rev_list "$_eval" | while read hash line
+ eval "$_eval" | while read hash line
do
case "$VARS,$FOUND,$TRIED,$hash" in
# We display some vars.
@@ -332,20 +317,113 @@ exit_if_skipped_commits () {
fi
}
+bisect_checkout() {
+ _rev="$1"
+ _msg="$2"
+ echo "Bisecting: $_msg"
+ git checkout -q "$_rev" || exit
+ git show-branch "$_rev"
+}
+
+is_among() {
+ _rev="$1"
+ _list="$2"
+ case "$_list" in *$_rev*) return 0 ;; esac
+ return 1
+}
+
+is_testing_merge_base() {
+ grep "^testing $1$" "$GIT_DIR/BISECT_MERGE_BASES" >/dev/null 2>&1
+}
+
+mark_testing_merge_base() {
+ echo "testing $1" >> "$GIT_DIR/BISECT_MERGE_BASES"
+}
+
+handle_bad_merge_base() {
+ _badmb="$1"
+ _good="$2"
+ if is_testing_merge_base "$_badmb"; then
+ cat >&2 <<EOF
+The merge base $_badmb is bad.
+This means the bug has been fixed between $_badmb and [$_good].
+EOF
+ exit 3
+ else
+ cat >&2 <<EOF
+Some good revs are not ancestor of the bad rev.
+git bisect cannot work properly in this case.
+Maybe you mistake good and bad revs?
+EOF
+ exit 1
+ fi
+}
+
+handle_skipped_merge_base() {
+ _mb="$1"
+ _bad="$2"
+ _good="$3"
+ cat >&2 <<EOF
+Warning: the merge base between $_bad and [$_good] must be skipped.
+So we cannot be sure the first bad commit is between $_mb and $_bad.
+We continue anyway.
+EOF
+}
+
+check_merge_bases() {
+ _bad="$1"
+ _good="$2"
+ _skip="$3"
+ for _mb in $(git merge-base --all $_bad $_good)
+ do
+ if is_among "$_mb" "$_good"; then
+ continue
+ elif test "$_mb" = "$_bad"; then
+ handle_bad_merge_base "$_bad" "$_good"
+ elif is_among "$_mb" "$_skip"; then
+ handle_skipped_merge_base "$_mb" "$_bad" "$_good"
+ else
+ mark_testing_merge_base "$_mb"
+ bisect_checkout "$_mb" "a merge base must be tested"
+ checkout_done=1
+ return
+ fi
+ done
+}
+
+check_good_are_ancestors_of_bad() {
+ _bad="$1"
+ _good=$(echo $2 | sed -e 's/\^//g')
+ _skip="$3"
+
+ # Bisecting with no good rev is ok
+ test -z "$_good" && return
+
+ _side=$(git rev-list $_good ^$_bad)
+ if test -n "$_side"; then
+ check_merge_bases "$_bad" "$_good" "$_skip"
+ fi
+}
+
bisect_next() {
case "$#" in 0) ;; *) usage ;; esac
bisect_autostart
bisect_next_check good
+ # Get bad, good and skipped revs
+ bad=$(git rev-parse --verify refs/bisect/bad) &&
+ good=$(git for-each-ref --format='^%(objectname)' \
+ "refs/bisect/good-*" | tr '\012' ' ') &&
skip=$(git for-each-ref --format='%(objectname)' \
- "refs/bisect/skip-*" | tr '\012' ' ') || exit
+ "refs/bisect/skip-*" | tr '\012' ' ') &&
+ # Maybe some merge bases must be tested first
+ check_good_are_ancestors_of_bad "$bad" "$good" "$skip" || exit
+ test "$checkout_done" -eq "1" && checkout_done='' && return
+
+ # Get bisection information
BISECT_OPT=''
test -n "$skip" && BISECT_OPT='--bisect-all'
-
- bad=$(git rev-parse --verify refs/bisect/bad) &&
- good=$(git for-each-ref --format='^%(objectname)' \
- "refs/bisect/good-*" | tr '\012' ' ') &&
eval="git rev-list --bisect-vars $BISECT_OPT $good $bad --" &&
eval="$eval $(cat "$GIT_DIR/BISECT_NAMES")" &&
eval=$(filter_skipped "$eval" "$skip") &&
@@ -366,9 +444,7 @@ bisect_next() {
# commit is also a "skip" commit (see above).
exit_if_skipped_commits "$bisect_rev"
- echo "Bisecting: $bisect_nr revisions left to test after this"
- git checkout -q "$bisect_rev" || exit
- git show-branch "$bisect_rev"
+ bisect_checkout "$bisect_rev" "$bisect_nr revisions left to test after this"
}
bisect_visualize() {
@@ -415,6 +491,7 @@ bisect_clean_state() {
do
git update-ref -d $ref $hash || exit
done
+ rm -f "$GIT_DIR/BISECT_MERGE_BASES" &&
rm -f "$GIT_DIR/BISECT_LOG" &&
rm -f "$GIT_DIR/BISECT_NAMES" &&
rm -f "$GIT_DIR/BISECT_RUN" &&
diff --git a/t/t6030-bisect-porcelain.sh b/t/t6030-bisect-porcelain.sh
index 244fda6..a1ce95c 100755
--- a/t/t6030-bisect-porcelain.sh
+++ b/t/t6030-bisect-porcelain.sh
@@ -350,6 +350,96 @@ test_expect_success 'bisect does not create a "bisect" branch' '
git branch -D bisect
'
+# This creates a "side" branch to test "siblings" cases.
+#
+# H1-H2-H3-H4-H5-H6-H7 <--other
+# \
+# S5-S6-S7 <--side
+#
+test_expect_success 'side branch creation' '
+ git bisect reset &&
+ git checkout -b side $HASH4 &&
+ add_line_into_file "5(side): first line on a side branch" hello2 &&
+ SIDE_HASH5=$(git rev-parse --verify HEAD) &&
+ add_line_into_file "6(side): second line on a side branch" hello2 &&
+ SIDE_HASH6=$(git rev-parse --verify HEAD) &&
+ add_line_into_file "7(side): third line on a side branch" hello2 &&
+ SIDE_HASH7=$(git rev-parse --verify HEAD)
+'
+
+test_expect_success 'good merge base when good and bad are siblings' '
+ git bisect start "$HASH7" "$SIDE_HASH7" > my_bisect_log.txt &&
+ grep "merge base must be tested" my_bisect_log.txt &&
+ grep $HASH4 my_bisect_log.txt &&
+ git bisect good > my_bisect_log.txt &&
+ test_must_fail grep "merge base must be tested" my_bisect_log.txt &&
+ grep $HASH6 my_bisect_log.txt &&
+ git bisect reset
+'
+test_expect_success 'skipped merge base when good and bad are siblings' '
+ git bisect start "$SIDE_HASH7" "$HASH7" > my_bisect_log.txt &&
+ grep "merge base must be tested" my_bisect_log.txt &&
+ grep $HASH4 my_bisect_log.txt &&
+ git bisect skip > my_bisect_log.txt 2>&1 &&
+ grep "Warning" my_bisect_log.txt &&
+ grep $SIDE_HASH6 my_bisect_log.txt &&
+ git bisect reset
+'
+
+test_expect_success 'bad merge base when good and bad are siblings' '
+ git bisect start "$HASH7" HEAD > my_bisect_log.txt &&
+ grep "merge base must be tested" my_bisect_log.txt &&
+ grep $HASH4 my_bisect_log.txt &&
+ test_must_fail git bisect bad > my_bisect_log.txt 2>&1 &&
+ grep "merge base $HASH4 is bad" my_bisect_log.txt &&
+ grep "fixed between $HASH4 and \[$SIDE_HASH7\]" my_bisect_log.txt &&
+ git bisect reset
+'
+
+# This creates a few more commits (A and B) to test "siblings" cases
+# when a good and a bad rev have many merge bases.
+#
+# We should have the following:
+#
+# H1-H2-H3-H4-H5-H6-H7
+# \ \ \
+# S5-A \
+# \ \
+# S6-S7----B
+#
+# And there A and B have 2 merge bases (S5 and H5) that should be
+# reported by "git merge-base --all A B".
+#
+test_expect_success 'many merge bases creation' '
+ git checkout "$SIDE_HASH5" &&
+ git merge -m "merge HASH5 and SIDE_HASH5" "$HASH5" &&
+ A_HASH=$(git rev-parse --verify HEAD) &&
+ git checkout side &&
+ git merge -m "merge HASH7 and SIDE_HASH7" "$HASH7" &&
+ B_HASH=$(git rev-parse --verify HEAD) &&
+ git merge-base --all "$A_HASH" "$B_HASH" > merge_bases.txt &&
+ test $(wc -l < merge_bases.txt) = "2" &&
+ grep "$HASH5" merge_bases.txt &&
+ grep "$SIDE_HASH5" merge_bases.txt
+'
+
+test_expect_success 'good merge bases when good and bad are siblings' '
+ git bisect start "$B_HASH" "$A_HASH" > my_bisect_log.txt &&
+ grep "merge base must be tested" my_bisect_log.txt &&
+ git bisect good > my_bisect_log2.txt &&
+ grep "merge base must be tested" my_bisect_log2.txt &&
+ {
+ {
+ grep "$SIDE_HASH5" my_bisect_log.txt &&
+ grep "$HASH5" my_bisect_log2.txt
+ } || {
+ grep "$SIDE_HASH5" my_bisect_log2.txt &&
+ grep "$HASH5" my_bisect_log.txt
+ }
+ } &&
+ git bisect reset
+'
+
#
#
test_done